Operating InstruCtions '
Contents
1. Operating Instructions PIROS rh Digital Timer TR 610 Nr 610 0 000 be daily or weekly programm Response time number for the weekday indicated 1 ON 1 OFF 2 ON 2 OFF 3 ON 3 OFF H Holiday program The point indicates permanent control ON or OFF Indication of actual switch position switching command ON ON OFF OFF Time Response time Weekday 7 Sunda Hours holiday setting Weekday setting Time setting Minutes setting Override contro and permanent contral Program entry recall Switching command ndaily Connection Electrical devices should only be connected and mounted by an electrical specialist Manipulations and modifications on the switch will result in loss of warranty The national specifications and applicable safety regulations must be observed G Note In spite of an internal safety control unusual strong noise fields could cause a disturbance of the micro processor controlled time switch Interference can be avoided if the following details are considered during installation The device schould not be installed close to inductive consumers There has to be layed a separate line for the mains supply if necessary mains suppression filter Inductive consumers should have to be interference suppressed varistor RC section After having cleared the interference a reset of the time switch is necessary Starting up After connection to power supply the2. C 50 C 10750 Class of protection Il according to EN 60335 1 Type of enclosure IP 20 as per EN 60529 The time switches are in accordance with the European directives 73 23 EEC Low Voltage Directive and 89 336 EEC EMC Directive If the time switches are used together with other devices in an installation take care that the complete installation does not cause a radio interference Service GB TIMEGUARD LTD Apsley Way Waterloo Rd London NW2 7UR Tel 0181 4508944 Fax 0181 4525143
3. by pressing d and respectively entered by pressing Qa S 15 BOO if for example the command should be carried out from Monday to Friday at the same time 5 arrows must stand above the numbers 1 5 For daily switching commands 7 arrows must stand above the weekdays After having entered the weekday s the ON response time must be entered by pressing h and m The switching command displayed must be entered by pressing Prog OFF Switching command OFF is now indicated on the right side of the display The desired weekdays are now selected by pressing d and afterwards entered by pressing lt as already described The resoonse time can be entered by pressing vha and me and stroed by pressing Prog Response time No 2 3 and 4 to be entered as already described When the program entry is finished please press Recall Pleas recall the ON and OFF switchings by pressing Prog Afterwards press Change or Clearance of a command Recall the command by pressing Prog and change it by pressing h m and if necessary d or clear the command indicated by simultaneously pressing h m Afterwards press gt Holiday program lt Holiday program to interrupt the automatic program for 1 45 days Entry Keep pressing h during the total entry procedure Pressing the number of the holidays are counted individually A ter 45 days the display returns t
4. following 4 keys have to be pressed simultaneously d m e Reset total clearance Daily program After the starting up reset it is also possible to select an every day routine programm with 12 switchings 6 ON 6 OFF by means of time setting without pressing d for the respective weekday The daily program is indi cated by the arrow standing above 1 gt 7 The program entry starts as soon as the response time is entered as no weekday is entered M Setting off time and weekday During setting procedure keep pressing Set the arrow on the display to the actual weekday by pressing d Set the actual time by pressing h and m Now take off the clock is running Weekly program Weekly program with 8 response times 4 ON 4 OFF are programmable on one on several or for all weekdays by means of a free block entry option Notice If the entry is interrupted or finished the display shows the actual time after 40 seconds automatic operation If necessary the program entry has to be started once again ae Starting the program entry E Press Proge ON Switching command The display shows h ON is indicated on the right side of the display representing the ON command Now press d and the arrow starts flashing above 1 Monday If this switching Command should be carried out on Monday Monday is entered by pressing amp Other or further weekdays can be selected
5. o 0 The holiday program starts at 0 00 h of the following day and is indicated by H OFF Recall Change Clearance By pressing h the stored or remaining holidays are indicated Additionally pressing amp the holiday pro gram can be prolongated resp set to 0 so that the automatic program sequence is continued The holiday pro gram even includes priarity switchings of permanent controls Override Pressing X ON OFF is switched alternately The following counte acting program sequence annuis the manual control Permanent control By pressing m simultaneously the following functions are switched Permanently ON permanent ly OFF Automatic Operation The point on the display indicates the pernanent function ON or OFF Summer Changeover 1 hour press d h simultaneously Winter Changeover 1 hour press d m simultaneously Technical Data Operating voltage 230 V 10 Ensure that tre power supplied to the product Mains frequency 45 60 Hz is within the specified voltage range of the product Own consumption approx 8 5 VA Contact rating 16 A 250 V cos p 1 10 A 250 V cos 0 6 Contact material gt AgCdO Time base quartz Memory locations 8 12 Shortest possible switching interval 1 minute Switching accuracy precise to the second Accuracy lt 1 sec day at 20 C Power reserve approx 250 hours at 20 C Admissible ambient temperature 10
Download Pdf Manuals
Related Search