Grandview Flocked Frame Screen User Manual Protecting Your
Contents
1. Step 6 There is a locking latch on the bottom wall mount only Stee Up Bracket Te Bottom Bracket Locking Latch Ur Secure Button Fig 16 Step 7 Fix the mounts onto the wall separately Fig 17 18 For 100 height h 1356mm amp 115 height h 1542mm w lt A Up Bracket 7 mum TMM A Bottom Bracket E Fig 17 Fig 18 Step 8 Hook screen onto the top mount and bottom mount Fig 19 20 Fig 19 Step 9 To uninstall the screen please press the latch towards the wall to release bottom frame from bottom mount then lift the screen a little to release it totally from top and bottom groove of the mounts Fig 21 22 Happy Viewing GRANDVIEW Protecting Your Screen e Keep away from direct sunlight or high temperatures e Examine both the front and back surfaces before retracting into the case to make sure it is free of dust dirt insects or other foreign matter e Use a soft brush or cloth to lightly remove any foreign particles Cleaning Your Screen e Do not use any solvents chemicals or abrasive cleaners on the screen surface e Use a mild detergent with warm water to remove any marks on the surface or screen case e Always immediately dab the screen with a lint free soft cloth to avoid soap marks e Do not scrub the surface Warranty 12 Months Imported and Distributed in Australia by Herma2. Technologies Factory 4A 6 Albert St Preston VIC 3072 For more information please go to www grandviewscreens com au or call 1300 730 025 GV_Frame_Screen_Jult1 _v1 1 GRANDVIEW Grandview Flocked Frame Screen User Manual Required not supplied Step 1 Step 4 Lay each section of the frames on a tidy flat surface Fig 1 Unfold screen fabric and insert the tensioning bars into the fabric grooves Fig 8 10 Horizontal Frame a Vertical Frame Electric Drill 8 x Screws Screw Driver to suit wall type Fig 1 Fig 8 Step 2 Slide Fixing Lugs into grooves on the reverse side of frames Fig 2 3 Supplied parts Fixing Lug Step 5 Fig 3 Align fixing lugs and the eyelets provided on the fabric Using the tensioning bar pull fabric eyelets over the lugs Tip Arrange Horizontal Frame x 2 f Corer Brackets Top Mount x 1 horizontal tensioning bars first then side tensioning bars amp Vertical Frame x 2 x 4 Step 3 Fig 11 15 Insert both horizontal and vertical frame sections with the corner stakes Ensure all joints are square and then lock off by tightening with the screws provided Fig 4 7 Fixing Lug 10mm Corner Screw Bottom Mount x 1 28 for 100 30 for 115 Side Tensioning Horizontal Tensioning Bar x 2 Bar x 2
Download Pdf Manuals
Related Search