MB3561 User Manual--paigao
Contents
1. Size Charging Nickel Metal current Hydride when charging your USB device and batteries at the same time 0 85A 900mAh 0 85A 1000mAh 0 85A 1100mAh AAA 0 85A 1200mAh Charge time will vary depending upon the brand capacity and condition of batteries being charged Important Safety Instructions 1 Before charging read instruction 2 This charger is intended for use with Nickel metal hydride rechargeable batteries only Attempting to charge other types of batteries may cause personal injury and damage to the charger Do not charge non rechargeable batteries Do not expose charger to rain or moisture For indoor use only Remove from mains when not in use Never use an extension cord or any attachment not recommended by manufacturer otherwise this may result in a risk of fire electric shock or injury to persons 7 Donot operate the charger if it has been subjected to shock or damage Take it to a qualified serviceman for repair 8 Do not disassemble the charger Incorrect reassemble may result in a risk of electric shock or fire 9 Unplug the charger from outlet before attempting any maintenance of cleaning 10 The appliance is not intended for use by young children or infirm persons without supervision Young children should be supervised to ensure that they do not play with the appliance 11 This power unit is intended to be correctly orientated in a vertical or floor mount position 12 Before scrappi2. A size 850mMA USB output 5V DC 2 1A Charging your digital device Important Check for voltage compatibility with your USB device first 1 Before using please check your digital device s input voltage and the output voltage of this unit s USB charge port if they can match Make sure the total loading does not exceed the rated output current of this unit 2 This Charger is able to power up charging all USB powered electronic devices such as iPhone iPad iPod smartphones tablet PC mobile phone MP3 MP4 player Bluetooth etc 3 Connect the USB charge port of this unit and your USB device with a suitable USB cables which may come you re your digital devices 4 Plug the AC adaptor into household electric outlet 100 240V AC The switching power supply will adjust automatically and your digital device should indicate it is now in charging mode 5 You can charge your USB device and the AA AAA batteries at the same time remark the charging time of AA batteries will become longer see the charging time table Charging Instructions 1 Insert 1 to 4 pieces of AA AAA rechargeable Ni MH batteries into the battery compartment 2 Make correct contact for polarity and according to the sign in the battery compartment 3 For charging of AAA battery pull down the adjustable battery contact plate first and then insert the AAA batteries into the compartment Now the AAA batteries will be hold firmly inside the compa
3. POWERTECH P JS Fast Ni MH Battery Charger User Manual Features e Recharges 1 piece to 4 pieces AA or AAA Ni MH batteries at a time e 4Individual charging channels e Powered by the supplied AC Adaptor Universal input voltage 100 240V AC 50 60Hz for worldwide use when using at indoor or by the supplied DC Car Adaptor when using in a vehicle e Microprocessor Controlled Batteries life well protected by dV detection and timer protection e Unique design with an adjustable battery contact plate that makes a good amp solid contact with AA amp AAA batteries e Defective and Non rechargeable battery detection Automatic charging current selection for size AA and AAA batteries e 4xLEDs indicate the battery charging status Blue LED rapid charge Blue LED turn off Batteries get fully charged and ready for use Flashing Blue LED Cells are not suitable for charging e Designed with an USB charge port 5V DC 2 1A which can be used to power up or charging your USB device i e iPhone iPad iPod smartphones tablet PC mobile phone MP3 MP4 player Bluetooth etc You can charge your USB device and the AA AAA batteries at the same time Safety Features Negative delta V cut off function Safety timer to prevent over charge Thermal cut off Reverse polarity protection Bad cell Detection Specifications r 100 240VAC 50 60 Hz ae International Compatible Charge rate AA size 2000mA 1000mA Ni MH AA
4. ng your charger remove the batteries from the unit and they are disposed of safety a le iPhone iPad iPod are the trademark and properties of Apple Inc FAG FALE Mal AESF 210 290mm
5. rtment The charger will adjust the suitable charging current for AAA battery automatically 4 When using at indoor Connect the supplied AC adaptor s barrel plug into the jack on the back of the charger Plug the AC adaptor into household electric outlet The switching power supply will adjust automatically when using overseas a poplar plug adaptor must be required not supplied any available 100 240VAC Caution The supplied AC adaptor supplies 12VDC and delivers 1 8A and its plug fits into the charger s DC input jack Using an adaptor that does not meet these specifications could damage the charger or the adaptor When using in a vehicle Connect the supplied DC car adaptor s barrel plug into the charger s DC input jack Plug the large end of the cord into the 12V car lighter power port 5 The Blue LED will glow to indicate the proper charging After the batteries are fully charged the Blue LED will turn off to indicate the charged batteries are ready for use 6 Unplug the charger and remove the batteries from the charger when not in use 7 Begin again at Step 7 to charge the next set of batteries Bad Cell Detection When charge process is started the charger detects the health status of each of the cells in the battery compartment If any battery is unsuitable for charging i e short circuit or reversed polarity the status Blue LED will flash The damage cell s should be properly disposed of Charging Time
Download Pdf Manuals
Related Search