OUTDOOR TV USER MANUAL
Contents
1. Your product has been manufactured and tested with your safety in mind However improper use can result in potential electrical shock or fire hazards To avoid defeating the safeguards that have been built into your new product please read and observe the following safety points when installing and using your new product and save them for future reference Observing the simple precautions discussed in this operating guide can help you get many years of enjoyment and safe operation from your new TV This product complies with all applicable regulations and voluntary safety standards 1 Read Instructions safety and operating instructions should be read before the product is operated 2 Follow Instructions All operating and use instructions should be followed 3 Retain Instructions The safety and operating instructions should be retained for future reference 4 Heed Warnings All warnings on the product and in the operating instructions should be adhered to 5 Cleaning Disconnect the unit from the electricity supply before cleaning Do not use abrasive cleaners Use a damp cloth for cleaning 3 www liquifi com au Warningl cont 6 Transporting Product A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to overturn 7 Ventilation Your TV will not under normal operating conditions require any ventilation It has been2. OUTDOOR USER MANUAL Sizes 42 47 55 65 HD hom pem Dv3u grav Contents Warnings Supplied Accessories First Fix Kit Cabling Installation and Positioning Setup and Tuning Troubleshooting www liquifi com au Waterproof Remote Control Detail Connection deEallSa Control BURON EM ORE RS232 and Infra Red Warning Before operating the set please read this manual carefully CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO PREVENT INJURY THIS APPARATUS MUST BE SECURELY ATTACHED TO THE WALL IN ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS CAUTION DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL BEWARE OF STATIC SENSITIVE PARTS WARNING To reduce the risk of electric shock do not remove cover or back No user serviceable parts inside Refer servicing to qualified service personnel To prevent fire or shock hazard do not expose the rear of the set to rain or moisture CAUTION Unauthorized tampering with the inside of the TV invalidates the warranty The manufacturer shall not warrant for any damage caused by improper maintenance and or repair work by third parties Important safeguards for you and your new product
3. to clear the Input Source list from the screen Press the EXIT button to close the Input Source list without selecting an alternative source The Input Source list allows selection of the following DTV Digital Television ATV Analogue Television PC RGB HDMI AV Video Audio L Audio R and USB disk Input Source DTV www liquifi com au 14 Screen Menu Press Menu 2 button to show Channel Picture Sound Time Option Lock menu m Press OK o button to select specific submenu and the adjustable value In the submenu Press the UP e button DOWN button to select menuitem Tuning DIM Manual unmg i ATV Manal Iuning CHANNEL d Programme Edit signal Soring ooltware Updale UsB 1 Channel Menu Auto Turing _ Press the UP amp button DOWN button to select Auto Tuning and then press button and input the password NO 0000 then to choose ATV DTV ATV DTV with LEFT button RIGHT button and press UP e button DOWN 2 button or LEFT 0 button RIGHT button to select country channel like German Italy ATV Manual Tuning Auto Tunng DIV Manual unma ATV Manu Tuning CHANNEL t Programme Edit Signal Infamisatian Cl LCN Sorting Software Updale USB DAR j 2354 So uud 2 on _ 11111 1 1 1 11111
4. 14 DTV Manual Tuning Press UP e button DOWN 0 button to select DTV Manual Tuning and then press OK button and input the password 0000 then press LEFT o button RIGHT o button to select channel number or directly press number keys to select channel number and then press button to begin to search channel Manual Tuning Press UP e button DOWN e button to select ATV Manual Tuning and then press OK o and input the password NO 0000 then press LEFT button RIGHT button to select Press UP button DOWN x button or LEFT o button RIGHT button to select specific submenu and the adjustable value Program Edit Press UP button DOWN 62 button to select program edit and then press button to enter menu Signal Information Press UP O button DOWN o button to select Signal Information and then press o button to see Signal Information LCN Sorting Press UP button DOWN button to select LCN Sorting and then press o button to set sort on off Software Update USB Press UP e button DOWN 6 button to select Software Update connect USB Port to operate 15 www liquifi com au 2 Picture Menu Picture Mode Standard Color Tempurater Aspect Morse Reducton PICTURE Screen Picture Mode Standard Press UP button DOWN button to select Pic
5. OWN button to select Surround Sound and then o button to enter submenu then press UP button DOWN 62 button to select off surround SRS trusurround XT mode AD Switch Press UP button DOWN 6 button to select AD Switch and then OK button to select on off and you can adjust AD volume value by pressing LEFT button RIGHT Q button when AD switch is set to on www liquifi com au 16 4 Time M enu Clock Cit Time On Time sleep Timer Auto Standby Off lime ome Clock Press UP button DOWN button to select Clock and then button to set Off Time Press UP button DOWN to select Off Time and then OK button to enter the submenu press LEFT button RIGHT to select off once everyday Mon Sat etc And you can adjust hour or minute by pressing LEFT button RIGHT button Time Press UP e button DOWN button to select On Time and then o button to enter the submenu press LEFT button RIGHT to select off once everyday Mon Sat etc And you can adjust hour minute source channel volume by pressing LEFT button RIGHT button Sleep Timer Press UP button DOWN Q to select Sleep Timer and then OK o button to enter submenu and press UP button DOWN to select the sleep timer type Auto Standby off Press UP button DOWN t
6. SD language menu will be displayed To switch the TV to standby press the The LED indicator will show red to indicate that the TV is in standby mode The on screen menus can be in any of the following nine languages English Espa ol Frances Italiano Nederlands Polski Portug s and Deutsch 1 Press the UP button DOWN button or LEFT button RIGHT button to select OSD Language and then OK button 2 Nonce to select Auto Tuning and display the Country selection window 3 Select the required country with the buttons Choose from Australia Austria Belgium Bulgaria Croatia Czech Denmark Finland France Germany Greece Hungary Italy Luxembourg Netherlands Norway Poland Portugal Romania Russia Serbia Slovenia Spain Sweden Switzerland UK 4 Press the o button to start the auto tuning The Channel Tuning dialogue will be displayed to show the progress of the tuning When tuning is complete the Channel Tuning dialogue will be cleared and the first available channel will be selected OSD Language Cesk y Francais ni ak i A 13 www liquifi com au Selecting a Source 1 Press the Source button to display the Input Source list 2 Press the UP O button or the DOWN 122 button until the required source is selected 3 Press the OK o button to confirm selection of the chosen input and
7. V reception www liquifi com au the remote control is not on standby Check the brightness setting of the display Lamp may have malfunctioned Make sure a cable with no VIDEO input signal is connected to the AV INPUT terminal Check the sound setting Make sure the sound is not muted Make sure the speakers are connected properly Make sure the connectors of the optional speaker system are securely inserted Make sure COLOUR and CONTRAST settings are adjusted correctly Make sure BRIGHTNESS setting is not set too low Check to see BRIGHTNESS setting Lamp may have malfunctioned Change the batteries Make sure the infrared transmitter window is not receiving strong light such as light from fluorescent lamps Make sure AV INPUT is not set Make sure the input source is set to other than AV The reception may be weak The state of the broadcast may also be bad Make sure the antenna is facing the right direction Make sure the outside antenna is not disconnected Make sure the antenna is facing the right direction There may be reflected electric waves from mountains or buildings There may be interference from cars trains high voltage lines neon lights etc There may be interference between the antenna cable and power cable Try positioning them further apart Is the unit receiving interference from other devices Transmission antennas of radio broadcasting stations and transmission antennas of amateur radios and cellular ph
8. d then OK o button to select off 4 5 etc www liquifi com au 18 USB Menu Press Source 1 button selection USB mode to show Photo Music Film Text Press LEFT button RIGHT button to choose specific menu and the adjustable value In the submenu press UP button DOWN button or LEFT Qi button RIGHT button to choose menuitem Input Source DTV ATV 1 PHOTO Show Select CV press OK o button to enter submenu 1 Insert USB Port to USB entry 2 Press LEFT button RIGHT button to select photo and then OK o button to enter submenu 3 Select C press OK button to enter submenu 4 Select the specific photo and press USB PLAY button to play 5 Press Exit 1 button to exit 19 www liquifi com au 2 MUSIC Play Select CV press OK button to enter submenu 1 Insert USB Port to USB entry 2 Press LEFT Qi button RIGHT button to select photo then OK button to enter submenu 3 Select C press OK button to enter submenu 4 Select the specific photo and press USB PLAY o button to play 5 Press Exit E button to exit 3 FILM Play Select CV press OK o button to enter submenu 1 Insert USB Port to USB entry 2 Press LEFT eh button RIGHT button to select photo then OK o button to enter submenu 3 Select C press OK o button to enter sub
9. designed so that any heat will dissipate through the glass at the front of the unit This will get hot but need not cause concern If the unit is to be installed in a place other th an the bathroom or other domestic room please consult your supplying dealer Forced air ventilation will be required if this product is to be used in a ste am room sauna or similar 8 Power Sources This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your supplying dealer 9 Power Lead Polarization This product is equipped with a three wire grounding type cord This is a safety feature Do not defeat the safety purpose of the grounding type cord 10 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the product 11 Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges A face plate also needs to be installed with an isolating capacitor to prevent any damage from static 12 Lightning For added protection for this product during a lightning storm or when it is left unatte
10. hen OK button to select Disk and press UP button DOWN button to adjust Restore Factory Default Press UP button DOWN button to select Restore Factory Default and then Q9 button to select sure or not OSD Animation Rotation Only Press UP o button DOWN v button to select OSD Animation Rotation and then OK o button to select on or only OSD Time Press UP button DOWN button to select OSD Time and then OK button to select 305 605 etc ECO Mode Press UP button DOWN p button to select ECO Mode and press UP o button DOWN button button to select high middle low mode Blue Screen Press UP button DOWN button to select Blue screen and OK button to select on off Lock System Sel Password LOCK Block Program Parental Guidance Lock System Press UP A button DOWN Q button to select Lock System and then OK o button to select on off to open and close the lock function Set Password Press UP a button DOWN button to select Set Password and then OK o button to input old password 0000 and set new password Block Program Press UP Kg button DOWN button to select Block Program and then OK button to enter the submenu and then green button to choose lock unlock mode Parental Guidance Press UP e button DOWN Q button to select Parental Guidance an
11. is damaged b If the glass front has been damaged c If there is ingress of water between the glass and the LCD screen d If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation e If the product has been dropped or the cabinet has been damaged f If the product exhibits a distinct change in performance 19 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by Liquifi or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other safety hazards 20 Please note The installation of your TV unit should be carried out by a technically competent and qualified person and must conform to all the relevant regulations If in doubt please refer to your supplying dealer 21 Power This set operates on an AC supply the voltage is as indicated on the label on the back cover This appliance must be earthed at all times through the chassis as well as through the power lead 22 Location This TV must be positioned according to the latest regulations concerning the area it will be installed into Position your TV so that no bright light or sun
12. lection DTV ATV HDMI etc TIM ER button Displays sets the sleep timer MUTE button Turns the sound on or off DISPLAY button Switches between picture formats Auto 16 9 4 3 Zoom1 Zoom2 SCAN button TV RADIO button Switches between DTV and Radio Picture Mode button Switches between picture modes Standard Movie Dynamic Personal Soft MENU button Displays or closes the menus EXIT button Closes all on screen menus and lists TTX button If main input source is TV that includes TTX information enters TTX display mode FAV button Displays or closes the favourite programme list Up button Menu and EPG navigation Down button Menu and EPG navigation W aterproof Remote Control Detail cont www liquifi com au 600000 1 NUM BER buttons Input Su programme numbers O O O VOL Volume up down buttons Adjust the volume u CH Programme up down buttons Selects next or previous programme Left button Menu and EPG navigation Right button Menu and EPG navigation OK button Accepts menu selections or displays the programme list EPG button Displays the Electronic Programme Guide SUBTITLE button Switches subtitles on or off LR MTS button No function COLOUR button DTV Text and text menu options Back button switches between last and current programmes USB PLAY button Accepts menu selections o
13. light will shine directly on the screen and locate it at a suitable viewing height Do not expose the TV to vibration dust or heat Also ensure that the TV is placed in a position that allows a free flow of air 23 Installation It is the installer s responsibility to ensure that the TV unit is installed and sealed correctly as stated in these instructions and in conjunction with the latest safety regulations Waste Electrical and Electronic Equipment WEEE Directive In the European Union this symbol indicates that this product should not be disposed of with household waste It should be deposited at an appropriate facility to enable recovery and recycling This product contains Electrical Electronic Parts which are produced using components in compliance with the requirements of European Union Directive 2002 195 EC for the Restriction of the use of certain Hazardous Substances in Electrical and Electronics Equipment RoHS 5 www liquifi com au Supplied Accessories Make sure the following accessories are provided with your product 1 User s Manual 2 Waterproof Remote Control 3 Outdoor TV Cable 1 x VGA 1 x HDMI 1 x RS232 Options Wall Mount Bracket Waterproof Speakers www liquifi com au 6 W aterproof Remote Control Detai www liquifi com au POWER Off button Turns TV on from or off to standby SOURCE button Displays the Input Source menu and allows source se
14. menu 4 Select the specific photo and press USB PLAY o button to play 5 Press Exit 2 button to exit www liquifi com au 20 4 TEXT Show Select CV press OK o button to enter submenu 1 Insert USB Port to USB entry 2 Press LEFT button RIGHT button to select photo and then button to enter submenu 3 Select C press OK o button to enter submenu 4 Select the specific photo and press USB PLAY button to play 5 Press Exit 1 button to exit 21 www liquifi com au RS232 and Infra Red Codes The RS 232 control port enables the TV to be controlled from a home automation control system Your TV is RS232 controllable via the p pin D plug on the back of it Operating codes for this are as follows We have also included the Infra Red codes to assist in home networking installation RS232 Code DM Right x Computer Control of the System Your TV can be controlled from a computer using the RS 232C terminal The input signal can be selected the volume can be adjusted and various other adjustments and settings can be made enabling au tomatic external con trol of your television by your home networking system or similar Connect an RS 232C cable cross type commercially available to the supplied 9 pin D RS 232C for the connections This operation system should only be used by an experienced home networking computer installer Set the RS 232C co
15. mmunications settings on the computer to match the display s communications settings e j 335 5215 The display s communications settings are as follows RS232 Protocol b p 9 Pin D Connections are as follows Command Code Sequence Pins Definition 99 A2 C4 02 FF www liquifi com au 22 FEATURES Below you will find the detailed feature PAL SECAM _ Bound BG LL ATV 100 Mn 2K BK QPSK 16QAM 64QAM Video System Channel Ls MPEG 2 Layer 24bit 3280 SYSTEM Multimedia PVR softwore update input De interlace 2 Comb fitter 30 Memes 2 USB MULTIMEDIA DivX Xvid MPEG 4 Mesa a Progressive JPEG 1 jpeg Baseline JPEG BMP Non Interlaced T Interlaced 23 www liquifi com au Troubleshooting No picture on screen and no sound from speakers Insert the AC power cord plug securely in AC power outlet Make sure No picture No picture from AV terminal Picture is displayed but no sound from the speakers Picture is too light Picture is too dark Remote control does not work No picture from AV OUT terminal The picture is not sharp The picture moves The picture is doubled or tripled The picture is spotted There are stripes on the screen or colours fade There is no digital T
16. nded and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent possible damage to the product due to lightning and power line surges 13 Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to avoid contact with such power lines or circuits as contact with them might be fatal 14 Earthing the product This product must be earthed properly to comply with the safety regulations in the country of use If you are unsure of these regulations please consult a qualified electrician 15 Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages or other hazards Refer all servicing to qualified service personnel If the TV does not operate properly switch it off and call your dealer 16 Mounting The product should be mounted on a wall only as recommended in the instructions Warningl cont 17 Caution Modifications Do not attempt to modify this product in any way without written authorisation from TV 18 Damage Requiring Service Isolate this product from the mains supply and refer servicing to qualified service personnel under the following conditions a If the power supply cord or plug
17. o select Auto Standby off and then OK button to set and select 3h 4h etc Time Zone Press UP button DOWN to select Time Zone and then button to enter submenu and press UP button DOWN 60 or LEFT button RIGHT button to adjust the time zone 5 Option Menu Select Disk USL Language Audio Language subtitle Language Hearing Impaired OPTION Country 27 PYR File System J Restore Factory Default OSD Animation Rotation Only OSD Time OSD Language Press UP button DOWN button to select OSD Language and then OK button Press UP button DOWN button or LEFT Qi button RIGHT i button to choose language choices Audio Language Press UP button DOWN button to select Audio Language and then button to enter submenu and then press LEFT button RIGHT Q button to select primary or secondary type 17 www liquifi com au Subtitle Language Press UP button DOWN button to select Subtitle Language and then OK o button to select prime or second Hearing impaired Press UP button DOWN Q button to select Hearing impaired and then OK button to select on off Country Press UP button DOWN button to select Country and then OK button to select country PVR File system Press UP button DOWN amp button to select PVR File system and t
18. ones may also cause interference Use the unit as far apart as possible from devices that may cause possible interference Check model number of screen does not have a B suffix This denotes it is a basic specification unit and does not therefore have a digital tuner fitted Also check that the aerial is digital compatible 24
19. r displays the USB programme list Waterproof Remote Control Detail cont Remote control with battery cover removed Before the waterproof remote control can be used the insulating plastic film must be removed from beneath the battery Place the remote control face down on a horizontal flat surface and use the opener to release the battery compartment cover by rotating it in an anti clockwise direction Set the battery cover and opener to one side Rest one finger lightly on the battery and pull the printed tag to ease the insulating film from underneath the battery Try to avoid touching the black O ring as it is coated in light grease Replace the battery cover and lock it back in place using the opener www taj dC Y t dz 10 First Fix Kit Cabling Please note All electrical installation should be carried out by a fully qualified electrician and all fire amp safety regulations must be obeyed Mains plug 240V mains supply Mains socket External Speakers TV aerial cable not supplied Power Requirement M ains Liquifi requires a 10 amp socket outlet connected to a 240 V mains supply via a readily accessible isolation switch This electrical installation must include an all pole switch with a contact separation of at least 3 mm in each pole Both the socket and the isolation switch must conform to the latest safety specification and be protected via an RCCD device or similar This
20. socket must be fitted in a dry area away from any moisture usually in the ceiling The mains plug must be fitted with a 5 amp fuse Installation and Positioning Further details can be found on the back of each screen VESA Mount optional Universal VESA Wall Mount The wall must be strong enough to hold at least 100kg Outdoor IV 211 www liquifi com au Connection details Further details can be found on the back of each screen Note Aviation plug Connector Array AC100 270V Power In HDMI High Definition Multimedia Interface PC Analog RGB Input D SUB S VIDEO In Optional AV In Option Video yellow Audio White Left Red Right PC Audio In RF In Antenna Input 75 Q USB disk In Optional RS 232 Control buttons bottom corner of back cover 9 Power 4 v Vol Vol 7 Source Turns TV on off Displays the On Screen Display OSD menu In OSD menu press key to return to pre phase Adjusts volume In OSD menu both keys are used to navigate within menu Vol is used to select the highlighted options Adjusts channels In OSD menu both keys are used to navigate within the menu Press to change the input sources www liquifi com au 12 Setup and Tuning Initial Tuning Press the POWER button on the remote control to switch the TV on from standby The LED indicator will show yellow and After a few seconds the O
21. ture mode and then button to enter Press LEFT button RIGHT button to select standard mild dynamic mode and press UP button DOWN A button or LEFT amp button RIGHT button to adjust value Color Temperature Press UP button DOWN button to select Color Temperature and then OK o button to enter and press LEFT o button RIGHT button to select warm user mode Aspect Ratio Press UP e button DOWN button to select Aspect Ratio and then OK o button to enter Noise Reduction Press UP e button DOWN e button to select Noise Reduction mode and then OK o to enter submenu You can select off low middle high default by pressing UP button DOWN button Screen Press UP button DOWN Q button to select Screen mode and then press OK to enter submenu in pc mode 3 Sound Menu Sound Mode Sound Bar Balance Surround Sound lt SOUND INEST eg SPDIF MODE Sound Mode Sound Bar Press UP button DOWN button to select Sound Mode and then OK button press LEFT button RIGHT button to select standard music movie sports user int spk sound bar mode Balance Press UP button DOWN v button to select Balance and OK o button to enter submenu press LEFT QU button RIGHT button to adjust balance value Surround Sound Press UP button D
Download Pdf Manuals
Related Search