User Manual - AutoBlackBox.com.au
Contents
1. Turn on the power of the vehicle the POWER LED turns on 3 low to high tone beep sounds will be heard after 30 seconds when the POWER LED turns on the product starts recording The video and audio data are continuously recorded and stored into SD memory card When impact of collision lightning acceleration or sudden brake is detected by the built in impact sensor the LED indicator of camera blinks three times and the recorded data is stored in SD memory card as event file When turning off the power the product processes the last data file for 5 10 seconds and turns off This will occur if device is wired to a constant 12V 24V supply The device will give three beeps high to low toned Please do not remove the SD memory card before the device has properly shut down Note In case the Shock Sensing Sound Alarm is set to ON at User Setting 2 scale beep tone beep beep will sound _ with LED indication and save as Event Image However in order to prevent malfunction of 3 axis acceleration sensor if the Event happens within 10 seconds after Alarm tone sounds Alarm tone won t sound but just LED blinks 3 times and record as Event Image Operation of Auto Parking Mode An Auto Parking Mode Switching function is built into this device In the instance of long term parking you can switch or release auto parking mode by using the built in 3 axis acceleration sensor When the device is recording in parking mode _ the device will only r2. Do not try to operate the product when driving 2 Do not disassemble repair or modify the product This will void the warranty and will result in the manufacturer not being held responsible for any issues or damage caused to the product 3 Do not clean the product with water or volatile solvents This may cause an electrical fault which will damage the product and create a potential fire hazard 4 Use only genuine parts or accessories supplied and recommended by the manufacturer Using non genuine parts can damage the product and void your warranty 5 Ensure you connect the product to a stable power supply DC12 24V 6 If the product is connected to the battery of the vehicle when the vehicle is not being used for a long time please disconnect the product from the power supply to avoid draining your battery 7 Do not store the product inside a vehicle for a long period of time especially in the Summer or winter season This may cause the damage or faults to the product Safety Instructions Caution 1 1 Place the product in an unobstructed place to optimize viewing performance Mounting the cameras behind tinting or obstacles will effect the recording vision quality 2 Please clean the lens of camera regularly to ensure recorded footage Is clear 3 If you need to re install or change the location of the product please recheck the angle of the camera lens to ensure proper recording and confirm its recording status on playba
3. Function keys in the PC player e File management in the PC player e How to change the user setting e How to manage the recorded files e How to format the SD memory card e Product specifications Main features 1 ITB 500HD records a front and rear view simultaneously with vivid HD resolution It records video and audio continuously using H 264 high efficiency data compression method in the screen resolution 1280 x 720px 2 ITB 500HD contains an Uninterrupted Power Cable UPC function for using the product as a surveillance camera when the vehicle engine is stopped parking mode It has battery protection circuit also in order to prevent the vehicle battery from discharging 3 If the external GPS receiver optional is connected to the device the ITB500HD records the driving speed and display s it in the PC Player It also records the driver s location and displays this data using a google maps window in the PC player 4 When parking mode is activated normal mode recording is ceased to avoid long term recording of unnecessary video while parking The device will record for 60 seconds after an event only when the devices g sensor senses shock on the vehicle or the motion of objects 5 The front amp rear camera spins up to 360 degrees to record in various directions 6 A built in super capacitor for instant power back up will complete the last recorded files safely when the vehicle s electricity power is shut off due to a significa
4. complete you can continue to mount the main control unit and arrange cameras see next page 12 Installation 10 11 Fix the main unit to a suitable accessible location with some ventilation Use the provided 3M tape or mount with screws so the install is secure Align the direct of the camera lens to the front referring to the camera direction alignment guide arrow make printed on each camera Connect the GPS receiver optional to the correct port on the main control and mount receiver so it has a clear view of the sky do not mount behind dark tint strips or close to metal Arrange all cables with cable holders to provide a neat installation Check all connections at the main control unit to ensure all the correct ports have been used Power on the unit for normal operation Installation is now complete When the external GPS receiver is installed please HO lt lt make sure the GPS receiver face up to the sky and op a fully exposed through the windshield Then put the VY i GPS receiver cable into the GPS port of main unit 13 How to Connect Power This product contains an Uninterrupted Power Cable UPC function for using the product as a surveillance camera when the vehicle engine is stopped However when you connect UPC it is highly recommended to use our authentic UPC which has battery protection circuit in order to _ prevent the vehicle battery from discharging 1 Open fuse box inside o
5. the right hand side for your reference Removable Disk Ex Recording File Type per Circumstances Normal Recording File Front recO_date_time avi Normal Recording File Rear rec1_date_time avi Event File while Driving Front evtO_date time avi Event File while Driving Rear evt1_date time avi Event File while Parking Front pmrO0_date_time avi Event File while Parking Rear pmr1_date_time avi i ep Le other Places il 97 EA AAA T Hy om pais If additional appears on the end of the file name eg recO_ 20121231 120430 _ avi it means time management error of the the unit in this case please correct the time at setting menu on the PC Player 34 How to update the product firmware The firmware of the product can be updated easily if any new firmware is released for the purpose of improvement and or correction of the product firmware 1 Download the new firmware from the web site of your local authorized product supplier 2 Unzip the file if it ends in zip You can find the firmware file named ito 500hdfw bin from unzipped folder 3 Pull out the SD memory card from the main unit and insert it into the memory card reader as shown on the left picture Then put the memory card reader into the USB port of the PC 4 The SD memory card will be detected as USB removable disc 353 How to update the product firmware k Faj 5 Please copy the firmware file into th
6. User Manual ITB 500HD User Manual PASS By BLACK Real 2CH HD Vehicle Driving Recorder TRONICS 1 lt Warranty amp Scope of Liability of Video Recording gt This product is a supplementary device to increase driver awareness for safe driving and assist in accident prevention as well as reference about the circumstances of an accident This product and it s recorded data can not be used to legally judge any 3 party s liability of an accident If the level of impact is so light even in the case of an accident the impact g sensor may not recognize it and an event file for recording may not be triggered In this case tap the ITB500 cameras to activate an event file for saving The manufacturer shall not be liable for any damages due to the loss of data or any other malfunction occurred by the use of this product Please note This product is not guaranteed to work for all vehicles There is a potential for interference with modern vehicles using wireless alarm systems and smart keys It is important to test the device in your vehicle before carrying out the installation to ensure the product is compatible with your vehicle Table of contents e Main features Safety instruction Warning e Safety instruction Caution e Attention to SD memory card e Attention to GPS e Components e Name of the product details e Installation e Operation of the product e Installation of the PC player e How to play the video e
7. a separate storage source such as your computer hard drive or USB drive in case the SD memory card fails Attention to GPS optional for ITB500HD 1 Please note GPS connectivity can take up to 10 minutes to connect depending on the gps receiver s view of the sky and position of satellites The processing time for a gps connection will vary depending on certain factors such as weather conditions the vehicles surroundings and the position of satellites 2 Please note the overall functioning of the product such as video recording is not effected by a poor or unstable GPS connection 3 Please make sure the GPS receiver is mounted behind a clear non tinted part of the interior windshield Avoid installing the GPS receiver behind dark tinting or metal parts of the dash board 4 If the camera lens is tilted too far backwards for in vehicle video recording the GPS reception may become poor this applies to inbuilt GPS camera devices This is because the built in GPS receiver faces down to the ground and may be unable to communicate with GPS satellites Please revert back the direction of camera lens to the front after in vehicle recording 5 Do not use this product with other products that generate electromagnetic waves This may interfere with the GPS signal and reduce the performance of GPS reception Components PASS B BLACK Adhesive tape for Adhesive tape for cameras main unit spare 2EA gt a Cameras 2 M
8. are displayed from oldest at the top to most recent recordings at the bottom on the PC Player File List Window as shown below The corresponding icons per recording circumstances identifies the files All j Front Rear Lie i Recording File Type per Circumstances N a Se N Normal Recording Image File while Driving N 2013 04 26 08 41 44 E Event Recording Image File while Driving N 2013 04 26 08 43 44 P Event Recording Image File by motion while Parking E 2013 04 26 08 45 44 P Event Recording image File by impact while Parking N 201 4 26 08 47 44 N 3 2013 04 26 08 49 44 P 2013 04 26 08 53 5 P O 2013 04 26 09 01 P a 14 26 09 05 34 P 2013 04 P O 2013 04 26 09 09 p 201 4 26 09820 35 P 2 14 26 09 2 P 13 04 2 26 33 How to manage the recorded files PC USB Disc This product saves the image based on always recording type except parking mode However as per the circumstances at the time of image recording it classifies by normal recording while driving event recording while driving or while parking and saves to memory allocation as per user setting values Recorded files are saved as specific file type per recording circumstances as below 1 PC Removable Disk In case you need to see or access the recorded data files on the SD memory card without using the ITB PC Player you can identify each file type as they are saved with a specific file name depending on the type of recorded data Please refer to the table below on
9. ck 4 Routinely check the position and angle of the camera lens to ensure the camera has a good line of sight These checks should be carried out after travelling on rough terrain 5 Recording quality is affected by lighting conditions and may be poor or distorted due to the sudden level of brightness change For example right after passing through a tunnel 6 If the product is badly damaged due to large impact such as a car accident or disconnected from power source it may cease operating Video footage on the SD card will be saved Attention to SD memory card 1 The SD memory card has a limited lifetime and may be unable to store new data after a certain period of time In order to extend its lifetime we recommend you format the SD memory card periodically once per week If the SD card fails please purchase a new SD Memory card and replace the old one 2 Do not remove the power source or pull out the SD Memory card from the product when it is operating and recording This may cause a loss of data and damage to the SD Memory card 3 Do not disassemble repair or modify the SD Memory card This may cause a loss of data and damage to the SD Memory card 4 Please store the SD Memory card in the hard plastic case provided if you need to transport it 5 Please use the recommended SD Memory cards supplied by the manufacturer If not this may cause a loss of data or compatibility issues 6 Please back up any important data on
10. e of image recording it classifies by normal recording while driving event recording while driving event recording while parking and saves to memory allocation as per user setting values In case of exceeding the allocated memory capacity it deletes the images either from the oldest order or deletes all by the lump and then saves the newer images Please refer to the below for more details 1 Deletion by Time Order It is the recording type no matter what the circumstances at the time of recording normal recording while driving event recording while driving or parking mode to delete the images from the oldest ones and saves new image in case the capacity of recorded images are exceeding the memory card capacity Al 2t I E Ez 2012 05 17 14 59 06 2012 05 17 15 05 06 2012 05 17 15 01 06 2012 05 17 15 07 06 2012 05 17 15 03 06 i ee Delete from Biel ik nite srt bres h l 2 2012 05 17 15 05 06 i 2012 05 1 PASA 065 a 2012 05 17 15 07 06 2012 05 17 15 13 06 images r 7 y 2012 05 17 15 09 06 l 2012 05 17 15 15 06 2012 05 17 15 11 06 1 2012 05 17 15 17 06 l es i Save the newer 2012 05 17 15 13 06 i 2012 05 17 15 19 06 i ae SEE ess 7a images 2 Deletion by File Type Image files are saved based on time order as Normal Recording N and Event Recording File E P and you can set the memory allocation capacity of each file types In case of exceeding the allocated memory capacity it deletes the imag
11. e root directory of SD memory card Please format the SD card before copying the new firmware mE E file to the SD card COPY 6 Pull out the SD memory card from the PC and insert it into the main unit Turn on the power and then firmware update will start automatically with the starting beep sound It will takes 10 15 second to complete the firmware update and the continuous beep sounds while update is in progress When the update is completed the product will boot again and start to record with three low to high toned beep sounds Please do not remove the SD memory card in the middle of firmware update It may cause damage to the product Confirming Firmware Version 1 Please run Exclusive PC Player after connecting SD Memory Card with PC 2 You can see the firmware version at the pop up window when starting Exclusive PC Player and at General Setting of User Setting Menu How to format the SD memory card method1 fp AS By BLACK Generally a SD memory card has limited lifetime and may be unable to store new data after certain period of time In order to extend its lifetime we recommend you to format the SD memory card periodically The recommendable format cycle is 2 times per week and the method of format is as follows 1 Connecting to your Personal Computer Pull out the SD Memory Card from the main unit and insert it into the SD Memory Card Slot of your personal computer If the SD Memory Card Slot is not exist in yo
12. ecord when sensing shock or motion for higher efficiency of SD Memory Card 1 In order for the device automatically switch to auto parking mode the device must be connected to a constant electric power source in the vehicle After installing the device should remain on when the vehicle is turned off If the device turns it self off when the vehicle is off it is an indication the voltage supplied to the device has dropped 2 The device automatically switches to auto parking mode if the vehicle doesn t move while idling or has come to a stop for more than 5 minutes subject to the device setting has enabled the auto parking mode option 3 When entering auto parking mode the LED indicator of camera is changed to a red color once auto parking mode is activated recording will resume when motion or shock is detected by the camera s in built g sensor 4 If the motion by the vehicle is detected the device will automatically turn off auto parking mode and return back to normal recording mode SM gt n Note Recording at Parking Mode is working only when shock or motion is detected ANA _ however it may not be working if shock or motion is weak Also please be noted that l P R the recording can be resumed by the surrounding noises close to factory street side Table of error beeps Type of beep Root cause Troubleshooting No SD memory card or SD Insert the SD memory card or memory card related error Format the SD ca
13. eo brightness control e Night Vision e 180 degree rotate for reversed images O e Image capture 1 0X e Play speed control POLL e Audio volume control What is Night Vision In dim illumination circumstance Night Vision can help to play the video with more vivid quality _to see the surroundings clearly by amplifying the light of recorded video as much as possible File management in the PC player oT TO TOTAL LE um Frami Hear Mm Mi i W h PISTE placu Nme s NN File management in the PC player Button Function Select SD Memory Card Read Recorded Files Save Event Image HD BLACKBOX folder will be created on Desktop screen of PC Description Select SD Memory Card which saves Recorded Image to play or to format Read Recorded Images saved in PC Delete the selected Recorded Images Copy the selected Images to separate folder on your computer folder name HD BLACKBOX Save all Event marked Images to separate folder folder name HD BLACKBOX Change the settings of the device Please refer to the next page for further details 28 How to change the Setting Driving Mode fPASS BLACK HD 20P Hs V 1 0 0 VA Etro eh W 012 058 148 174 46 user setting t P AS S BLACK ODONO Version of the PC Player Displays the version of the PC player Recording Mode Set the Recording Resolution Front Brightness Set the brightne
14. es either from the oldest order or deletes all by the lump and then saves the newer images However you can not set the ratio of allocation space in case both shock sensing while driving and parking mode settings are set to OFF CD Always Setting the saving capacity for normal recording while driving file 2 Event Setting the saving capacity for event recording while driving file Parking Setting the saving capacity for event recording while parking mode file 31 How to manage the recorded files PC Player PASS B BLACK Deletion by File Type classifies and saves the recording files per each circumstances as per the ratio set at User Setting Accordingly in case the image saving ratio is changed by changing Shock sensing while driving or Parking Mode setting from OFF to ON when the pre set Recording Image Capacity per each circumstances are full this product will delete by the lump from the oldest recorded images as per changed setting ratio to secure the memory space and resume the recording However in case you change the setting from ON to OFF in the shock sensing while driving or parking mode this product does not delete by the lump but delete sequentially the corresponding recorded file type first and records the newer images lt Deletion the exceeding portion by the lump gt In case changing parking mode setting to ON and adjusting setting ratio exceeding portion of 20 out of pre set ra
15. f the vehicle and by using electric testing device such as a multimeter find the fuse which the power constant 12V is supplied to even when the engine is off For example emergency flasher lights interior lights and door lights etc 2 Pull out the fuse and connect one leg of the fuse with end red wire of the power Fee cable and insert back into original position j k ESA Sk 3 Connect end black wire of UPC to the any metal part of the vehicle that is grounded check for 12V with your multimeter from to If there is no screw attached to the vehicle you must to screw one on the vehicle make sure the connection is secure and not loose d 0000 Note The unit will not work if the black wire is not properly connected to ground on the car metal chassis 7 777 4 Make sure the product is working properly after the vehicle engine is started and then arrange and hide the cables for neat installation Note When UPC is connected please check your SD on a regular basis Extend the life of your SD card by formatting it more than once a week 14 Specifications of of connecting cables Type Specificaitons T _ Diameter 3 5 Power cable __ Diameter 1 3 1 VCC CHE 2 RX GPS cable as 3 TX GPS Signal Output 4 GND ey _ 1 Video at cate BB D 2 GND 1 VCC Cr 4 2 D Camera cable 2 3 D ee A GND Operation of the product
16. les stored in the SD Memory Card will be removed please do not store your personal data files in SD memory Card However if you format using format menu of PC Player software automatic reformatting will not occur e Tips 1 Even though you do format using PC Player software existing Set Up menu related files which you have set before will remain unchanged 2 Even though you do format using format menu of PC Player software you can use same as before at your personal computer 38 How to format the SD memory card method 2 1 You can format the SD memory card while the system is operating in your car Press and hold the mic off on button for more than 5 seconds the format will start with a short beeping sound 2 When formatting 2 single scale beeps will sound 1 3 Ifthe format is completed the beep sound will stop and the product nd will re boot automatically m A gt Once the format is completed all data in SD memory card will be deleted So please make sure that all necessary files to keep have to be backed up in another storage device Even though SD memory card is formatted all user setting values will remain same as before without change A Y E Setting Audio Recording On Off As this product has a built in microphone in case of privacy invasion when recording voice of people inside the vehicle you can easily change the setting of audio recording in the vehicle For more details please refer to
17. nd run the program and click Ok or Yes to allow ea the installation to start before starting Setup This wil make E possible to update relevant system files without having to reboo computer Click Next to continue Welcome to the ITB 100HDE PC Player Setup Wizard This wizard will guide you through the installation of ITB LOOHDE PC Player It i recommended that you close al other applicatio Beppe eet vee a 4 Follow the prompts and allow the program to install the Aai files onto your computer Once completed click the finish button ITB 2CH Black Box 5 Ifthe shortcut icon appears on desktop screen the PC Player installation has been completed 20 How to play the Video i P ASS BT BLACK 1 Pull out the SD memory card from the main unit and insert it into the memory card reader as shown on the left picture Then put the memory card reader into the USB port of the PC 2 Click on the shortcut icon of the PC player ITB 2CH Black Box PC Player 3 The program will now start and the footage will be viewable on the ITB PC player program 21 o a A N N o N N 0 N Time 2011 06 28 13 30 32 Di All Front Rear E E P If no footage is shown straight away Firstly try to select the appropriate SD memory card and click the OK button If no footage is shown please check to make sure data has been recorded onto the SD memory card All files on the SD memory card
18. nt incident ie Car accident 7 If the driver is faced with a possible collision and reacts increased acceleration or sudden braking is detected by the built in impact sensor the recorded data is saved as event file which is flagged as E in the file list Main features 10 11 IZ 13 14 The devices generates 3 file types of data captured by the built in 3 axis G force sensor Is displayed in the ITB PC Player software When the memory capacity of the SD card has been filled the oldest video data on the SD card will be overwritten to allow new footage to be recorded In car audio is also recorded along with video data that can be played back in the PC player In order to protect the privacy of the driver the audio recording function can disabled by pressing the format button in the front camera Inserting the SD card into a PC computer via the provided USB adapter allows the data to be stored and viewed on the computer using the PASS BLACK PC software The recorded video will be saved as an AVI file format Video files can then be played on any multimedia player additional codecs may be required for MAC Connecting the video out cable optional enables the user to watch real time video footage via an In car navigation or monitor screen The user can format the SD memory card instantly by pressing the mic on off button format button on the camera and holding for 5 seconds Safety Instructions Warning A 1
19. ounting Cradle SD card reader Cable holder User manual Camera Camera External GPS Video Out Cable TE Cigar jack type Connecting Cable Connecting Cable Option Option aaa dl ZEA 5M 7M Option cable option 10 Name of the product details PASS BR BLACK Main unit front 1 Power on off switch 2 Power on LED Indicator 3 Low battery warning LED indicator 4 GPS status indicator 5 SD memory card slot Main unit back 1 Front camera port 2 Rear camera port Fin rr rs A a A 1 3 4 5 6 a r a aL iat 7 3 IR receiver port N 4 AV cable port 0o aN 5 External GPS port J A 6 Power cable input port Camera 1 Cable input port 2 LED indicator 3 Camera Lens 4 Mic On off short key Self format button long key 11 Installation Assemble the camera with mounting cradle and fix it to the window shield Clean the window shield before fixing it Put the connecting cable into the camera port of main unit and connect it with each of the cameras Please install two cameras Front and Rear in the same way as above procedure Put the power cable into the power port and connect it with car battery fuse box The product requires constant 12V DC power supply Insert the SD memory card into the slot of main unit Check all connections and power on the unit for operation to run a TEST to make the sure system is functioning properly After the test is
20. ow of the PC Player Please refer below for more details 1 Shift Key File Selection Select the continuous group of files of the list 2 Ctrl Key File Selection Select the multiple individual files of the list 3 Up or Down Arrow Key Move in the file list 4 Left or Right Arrow Key Fast Rewind or Forward by 10 seconds interval of the played file 5 Page Up or Page Down Key Play the file before or after the currently playing file 6 Enter Key Play the selected file or resume the played file from the very beginning 7 Delete Key Delete the selected file e You can play the selected view what you want to see between the simultaneously recorded front and review view video Numeric 1 Key Play the front view only Numeric 2 Key Play the both front and rear view Numeric 3 key Play the rear view only If the level of impact is so light even in the case of an accident the impact senor may not recognize it and fails to sort out the data as event file automatically In this case press the event button manu ally 24 Function keys in the PC player FESTE Lace TIAS TO TOTAL gt AN AD Frami Kear h Time 25 Function keys in the PC player Icons Description M Dl e Go to previous or next file e Jump to 10 seconds previous or after image gt e Play il e Pause 4 e Vid
21. rd and try again 4 times short beeps repeatedly Correct the time manually in the settings menu of the PC Player If the external GPS is connected try GPS connection again for auto time adjustment Error in the time management 1 time short beeps ea 1 time long beep 2 times short beeps repeatedly Other errors Contact your local product supplier Installation of the PC player You can play back the recorded video and audio data on a PC via the ITB PC player supplied by _ the manufacturer This PC player program is designed to run best in Windows XP Windows Vista and Windows 7 32 bit 1 Pull out the SD memory card from the main unit and insert it into the memory card reader as shown on the left picture Gr wage a Then put the memory card reader into the USB port of the EZ el PC 2 If you have not yet inserted your SD card into the recording device Please proceed to insert the SD card into your PC before doing so Removable Disk Es Fe E Wes Favorbes Toot reser Ui 3 Search the USB disc and double click the installer file stored so ETA in the SD memory card 4 If there is no installation file on your SD card contact your product supplier for the installation file 19 Installation of the PC player panes 1TB 100HDE PC Player Setup AE 3 Welcome to the ITB 100HDE PC Player Setup Wizard Once you have the PC player installation file located nina Open a
22. ss of Recording Image of Front camera Rear Brightness Set the brightness of Recording image of Rear camera Shock sensitivity while driving Set the sensitivity of 3 axis acceleration sensor while driving In case of setting to OFF Event file E will not be recorded while driving and you can not set the ratio of Event file E at Deletion by File Type menu Speed Display on Image It will display the speed of vehicle at the time of recording and you can see the speed when playing the image on the other media player other than exclusive PC player Speed display will be shown at the left upper part of image since after GPS signal is received and in case GPS signal is not received in underground parking lot etc it will show as Select the display type of Live video on external monitor Parking Mode Set Auto Parking Mode when parking and also set Event recording type when setting Auto Parking Mode In case of setting to OFF it will not enter to Parking Mode even while parking and you can not set the ratio of Parking file P at Deletion by File Type menu Shock In case the impact on the vehicle Motion Motion is sensed by Camera Shock Sensitivity while Parking Set the sensitivity of 3 axis acceleration sensor while Parking Mode Recording and although the setting value is same as the one of shock sensitivity while driving shock sensitivity while parking works much sensitive Setting Motion Sensitivity Set the mo
23. the informaiton below 1 Press Microphone On Off button at the bottom of the front camera short 2 Beep sounds indicates Voice Recording Status Voice Recording Status 2 scales low gt high J 2 scales high gt low Specifications Type of sensor Camera Recording Coverage Minimum Illumination Data compression 3 axis Impact sensor Recording Resolution Frame per second Power input Size mm Others Weight Operating temperature Description CMOS 2Mil pixels Diagonal 120 degrees Camera spins up to 360 degrees 0 9 Lux H 264 Built in 1280 x720 HD Each 15 fps for Front and Rear 12 24V Main unit 87x 129x24 Camera 68 x 43 Main unit 172 59 Camera 40g 20 70 C User Manual 118 500HD User Manual PASS Br BLACK Real 2CH HD Vehicle Driving Recorder 42
24. tio of event file 50 30 will be deleted by the lump from the oldest to secure the memory space and it will save the parking mode recording file lt Deletion the exceeding portion sequentially gt In case changing parking mode recording setting to OFF it does not delete by the lump but delete sequentially from the oldest parking file P to secure the memory space In case the event is happened within 5 seconds since the recording starts the previous recorded file is event marked together in order to show the before event situation Also in case the event is happened in 5 seconds prior to the recording ends the post recorded file is event marked in order to show the after event situation The previous recorded SN ee E The post recorded files isevent marked lt Within FirstSseconds The file is event marked E WithinlastSseconds gt filesisevent marked together A AAA together 32 How to manage the recorded files PC Player This product saves the image based on always recording type except parking mode However as per the circumstances at the time of image recording it classifies by normal recording while driving event recording while driving or while parking and saves to memory allocation as per user setting values Recorded files are aligned by time order in Exclusive PC Player and the corresponding icons in front of file name help you to identify the file easily 1 Exclusive PC Player The recording files
25. tion sensitivity while Parking Mode Recording Time setting You can set or correct the local time of your area manually 29 How to change the user settings PASS BP BLACK General Setting PASS BLACK Alvis 445 Y lle Sra Al GMT 09 00 Seoul Shock Sensing Sound Alarm Set the Sound Alarm announcement when recording Event File by impact sensing on the vehicle However you can not use this function in case the shock sensing menu while driving is set to OFF at Driving Setting Mode File Deletion Type Set the file deletion type of recorded images but you can not set this function in case both shock sensing while driving and parking mode setting are set to OFF Please refer to page 31 32 for detailed way of recording You can adjust the ratio with computer mouse by clicking and moving the small circle on the straight line path Time Zone You can set the standard time zone of your area Firmware Version Displays the firmware version of the product Recording Time Available per Setting Actual recording Time may somewhat vary Recording Angle Diagonal 120 degrees 120 degrees Numbers of pag per second Each 15 fps for Front amp Rear Each 15 fps for Front amp Rear based on 8GB SD Memory Card Sur eC Haines Shours 25 minutes 30 How to manage the recorded files PC Player PASS BLACK This product saves the image based on always recording type However as per the circumstances at the tim
26. ur personal computer insert SD Memory Card into SD Memory Card Reader and connect the Reader to USB terminal of your personal computer as shown on the left picture 2 Playing PC Player Software lab La a i E 1 Run PC Player Software and click the SD memory Card icon in the bottom of software 5009 la c h aa window 3 Formatting SD Memory Card Choose 5D Memory Card to be formatted and click Format button 4 Setting SD Memory Card Format Type Set the 5D Memory Card Format Type Please refer to the next page for more detailed explanation How to format the SD memory card method1 fF PASS BF BLACK e Detailed Explanation on Format Type Normal Format Except optimizing this product it will format SD Memory Card as like formatting personal computer Recovery This is to initialize the whole memory of SD Memory Card Low Format and this way of formatting is useful ifthere is any error that can t be recovered by Normal Format But it will take more time approx 10 minutes for 4GB Memory Card than Normal Format e Caution In case you insert SD Memory Card which was formatted by Windows Explorer software instead of using format menu of PC Player into the main unit this Product will automatically reformat the SD Memory Card to make the Product to be an optimal status Reformat starts with one time of beep sound and then finishes reformatting and starts video recording with two times of beep sound In case of reformatting as all fi
27. will be loaded onto the right window and will playback one by one in the sequential order of recording date and time oldest comes first You can select which file you wish to play by clicking on it directly You can sort the Recorded Files by clicking List Menu in the top part of file list Align the Files by 4 types as per recorded status Status All Shock Parking Normal Mode Align the Files by Ascending or Descending Order based on the Time 22 How to play the Video PASS ra Mapas CHA Jon E e 3 yoge Ea m 3 A FOCA MO tb ES The graph shown under the playback screen means the degree of X axis front and back Y axis left and right and Z axis up and down impacts when an event occurs The driving speed and GPS status displays on the top of the playback screen if the external GPS receiver is connected The speed can also be hardcoded onto the footage if selected in the settings menu If the external GPS is connected optional the device records the driving coordinates and matches it with Google maps Please note that the PC must be connected to the internet in order to use the Google PC map service Please note Antivirus software or firewalls can prevent the Google maps from displaying please check these if the Google map feature does not work How to play the video PASS By BLACK You can move select play or delete the recorded files by using your PC Keyboard in the File List Wind
Download Pdf Manuals
Related Search