User Manual
Contents
1. D etc 2 If the battery needs charge insert the USB plug into a computer s USB port or an USB wall charger 3 Turn on the unit by sliding the side switch to the ON sign position and use the Multifunction to switch the unit to Line in mode the LED will turn orange 4 Play music from your audio player 5 For more actions please refer to the instruction diagram of the multifunction switch above RECHARGE BATTERY When the LED is blue or the volume is week it means the battery needs to be charged Please turn the side switch to the OFF position and then connect the USB cable to the PC laptop or DC adapter to charge the unit When charging the LED turns blue The battery will be fully charge in about 2 hours and the LED will turn red2. ean the gel use a wet cloth to gently remove any dirt Do not get water into the speaker N Q9 on Warning Do NOT place the speaker on non horizontal surface to avoid the risk of falling down and damage pe eS CE Fe Made in China LED will blinks in orange If the unit is not in USB flash disk mode please use the Multifunction switch to achieve 3 For more actions please refer to the instruction diagram of the multifunction switch above FM RADIO MODE 1 In order to receive signals better please use the USB cable as an antenna by inserting the mini USB plug into the unit 2 Turn on the unit by sliding the side switch to the ON sign position a If there is no USB flash disk in the unit according to the mode priority the unit will switch to FM radio mode the LED will turn blue after several seconds pink b If there is aUSB flash disk in the unit please use the multifunction switch to switch the unit to FM radio mode 3 For the first use of the unit as a radio please press the multifunction switch to search channels after finishing searching the unit will play at the lowest frequency automatically 4 For more actions please refer to the instruction diagram of the multifunction switch above LINE IN MODE 1 Connect the mini USB cable to the unit and then insert 3 5mm plug of the audio cable into the output devices such as mobile phone projector laptop MP3 CD DV
3. g A User Manual Connection Diagram f Instructions Let s know the multifunction switch before operating the Vibration Speaker Multifunction Switch param Rotate to Rotate to left Press Pressand Rotateto Rotate to right _left briefly and hold briefly hold right briefly and hold Changes mode N A Volume Down Pause _ LINE IN NIA Volume Down Pause Volume Up ET aati gh es Next Song Volume Up g FM RADIO ohn Volume Down Scan oest pe Next Song Volume Up Previous BLUETOOTH Song BLUETOOTH MODE 1 Turn on the unit by sliding the side switch to the Bluetooth sign position When LED blinks blue the unit is ready to pair and waiting for phone and speaker to connect 2 Activate the Bluetooth function of the phone and search Bluetooth device 3 Select the Bluetooth device named BT SPEAKER and tell it to pair If the phone Volume Down Microphone Disconnect Next Song Volume Up requests you to enter a password please enter 0000 and confirm the connection After the phone shows Connect successfully the LED stops blinking and turn blue You now can play music from your phone or Music player For some phones it will show Connect failed don t worry it may have connected try playing music If you cannot play music retry paring the phone to the speaker 4 For more actions please refer to the instruction dia
4. gram of the multifunction switch above Mode Priority when the Multifunction switch is at ON position USB flash disk gt FM radio gt Line in USB flash disk MODE 1 Carefully insert a USB flash disk into the slot labeled USB 2 Turn on the unit by sliding the side switch to the ON sign position according to the mode priority the unit will be in USB flash disk mode and the LED shines in pink after several seconds the internal reader will play music in the disk auto matically and the Hamburger Bluetooth Vibration Speaker THANK YOU FOR PURCHASING THE VIBRATION SPEAKER WE APPRECIATE YOUR WILLINGNESS TO TRY SOMETHING NEW AND DIFFERENT IN SOUND TECHNOLOGY Precautions Remove the protective film from the bottom of the speaker while leaving the gel attached to the speaker Keep the protective film and reapply it when notin use Your speaker will work by placing it on clean hard and flat horizontal surface Every placement will create a new sound Have fun experimenting to find optimum placement within the room for the application you intend to use the speaker for Lightly press the top of the speaker to achieve a better connection between the gel and the sound surface 4 Correctly connect the cable according to the Connection Diagram Do not attend to open or disassemble this product 6 It is normal for the speaker to get slightly warm after prolonged use or high volume usage 7 To cl
Download Pdf Manuals
Related Search