USER MANUAL
Contents
1. The Picture submenu is shown here as an example ug Hints Operation hints are shown at the bottom of the screen Use the V direction buttons to make a selection from the main menu PICTURE SOUND FEATURE CHANNEL SETUP Press the gt button to enter the submenu system Once in the submenu use V buttons to select an item Press the OK button to access the selected item to make changes to the settings To return to the main menu press the MENU button To exit the menu display press the EXIT button NOTE Some menu items can only be activated when the relevant INPUT selection has been made ie the CHANNEL selection can only be accessed under DTV and ATV input modes Operate the OSD menu according to the hints provided at the bottom of the screen Basic Operation OSD Menu G 5 5 Recording Operation Operation Maintenance OSD Menu 1 Picture menu a b m Sound a 4 CONENEEENNEEEE c Channel mm i d uM J e eed Standard D Picture Feature av Move Ok Ente Exit Menu Return Description Picture Mode Select your desired picture mode Dynamic Standard Mild User Brightness Adjust image brightness OSD Menu Contrast Adjust image contrast Sharpness Adjust image sharpness not available in VGA PC mod2. 21 23 Recording Operation Recording Oeil o RE TEE o LL LN ER 24 26 DVD Operation Bi BEQlu 0 g treet n Mo Ix ETC 27 38 Maintenance and Service TPOUDICSMOOUNG RENE E ETE DT T shataen donate 39 SPECICATION S cuoc tii ea madent ttbi tesa 40 41 Power Supply Warnings DO NOT touch the power DO NOT use a damaged DO NOT plug several devices the power plug fully into plug with wet hands power cord or plug or a into the same outlet the outlet loose outlet A congested outlet may cause loose or improperly Doing so may result in Doing so may result in _ the outlet to overheat and start inserted power plug electric shock fire or electric shock fire may result in fire User Guidance Information Basic Operation DO NOT bend the power cord excessively or place heavy objects on it Doing so may result in fire or electric shock OSD Menu 9 5 E Operation When disconnecting the _ Always unplug the unit before Ds power cord from an AC cleaning sss outlet always grasp it by The purpose of these precautions is to S the plug Not doing so may result in HET fire or electric shock ensure user safety and prevent property Pulling on the cord damage can damage the internal wire Be sure to read and observe all safety and
3. Warning Ignoring this precaution may result in death or serious injury Caution Ignoring this precaution may result in injury or property damage Maintenance Service Use and Maintenance Although the LED screen is made with high precision technology and 99 99 or more of the pixels are effective black dots may appear or bright points of light red blue or green may appear constantly on the LED screen This is a property of the LED screen and is not a malfunction Warnings Disconnect the power cord from the power source during a thunderstorm Not doing so may result in fire or electric shock When not using the unit for long periods of time discon nect the power cord from the wall outlet f not cleaned clogged dust particles at ventilation holes could cause the unit to heat up and ignite when switched on which may result in a fire outbreak Always have two or more people dust on the power plug pins With a clean dry cloth at hand to lift or move the unit If the unit is dropped it could get damaged or otherwise cause injury DO NOT insert any metal objects such as screwdriver paper clip or a bent wire into the ventilation openings or A V _ terminals _ Doing so poses a serious risk _ of fire or electric shock When moving the unit be sure to turn off the unit and unplug the power cor
4. 33 DVD Operation Speaker Setup In the Audio Setup page press V button to select the Speaker Setup option then press OK or button play into the Speaker Setup a Audio Setup Page E a j Ta i HP T Ty PPT Downmix e LT RT Select to downmix multichannel audio soundtracks to LT RT channel output e Stereo Select to downmix multichannel audio soundtracks to stereo output ae Speaker Setup Page 1 1 be 2 le gt n Maintenance and Service 34 DVD Operation C DolbyDigitalSetup i Dynamic This option is used to set the compression ratio in order to control the sound Volume contrast lt Dolby Digital Setup Dynamic Set DRC To Full O Preference Page Audio ENG English Se Disc Menu ENG German Parental Spanish Password Default ese Preferred Audio Language Select to downmix multichannel audio soundtracks to stereo output Audio Choose a preferred language track to be played if it is available on the disc If it is not available the default language will be played 35 be 2 le 2 e LES LEE and Service DVD Operation Subtitle Choose a preferred subtitle language to be used if it is ava
5. Input Connector AUDIO L R PC AUDIO HDMI RF HEADPHONE COAX 3 The HDMI support 1 3 the HDCP support 1 1 Output Connecto 100 240V 50 60Hz TOW lt 0 5W PAL SECAM BG DK 48 25 863 25 MHz 2x8W 75 ohm NTFS FAT32 Maximum supported hard disk size 400G USB2 0 See the table on next page WUXGA Maximum supported resolution 1366X768 60Hz 736 256 494 736x81x442mm 6 25kg 100x200mm M4X10 0 40 C e Specifications are subject to change without notice Weight and dimensions are approximate Specifications Supported Formats MOVIE The max bitrate is 6Mbps The max resolution is 720x576 pixels AVI Mono colour 16 colour 256 colour 16 bit 24 bit 32 bit The max PHOTO resolution is 3000x3000 pixels min resolution is 100x100 pixels MUSIC Sample rate 8K 48K Bitrate 32K 320K Special note 1 The Media Unit can only support USB memory devices such as hard disk drives and flash drives and will not support multimedia devices such as mobile phones and cameras for recording purposes 2 Unit will only support hard disk drives with additional power supply maximum disk partition size of 400GB and a maximum capacity of 1 5TB For optimum performance it is highly recommended that a hard disk drive with an external power supply be used for larger capacities 3 The maximum number of files that each folder can contain is 5000 files 4 When u
6. Enter Exil Menu Return Description Lock This menu allows you to lock certain features of the television so that they can not be used or viewed For example setting a program rating lock for children locking specific channels and preventing unauthorised channel deletion or channel retuning Every time you enter the Lock menu you will be asked for a password The default is 0000 You are recommended to change the password to your own and keep it in a safe place OSD Menu a 5 E EE 5 Operation Recording Operation Return Lock Enable Turn on off the Lock function NOTE When it is turned on the Parental Guidance and Change Pin Code settings become active Channel Lock Delete in Channel Management Auto Search DTV Manual Search ATV Manual Search in the Channel menu will also require password access Parental Guidance Adjust Parental Guidance settings or turn it off No Block Change Pin Code Press the OK button to start First enter the current password then enter the new password twice to confirm DVD Operation Maintenance and Service OSD Menu Language Choose a desired language for the OSD menus Clock Adjust the clock by default the time is synced automatically from the DTV signal Sleep Timer Set the sleep timer so the television automatically switches off after a set amount of time Options range from 10 minutes to 240 minutes Auto Power Off The TV will
7. Record CoN Into Zaa EPG mode Press the RED button to change the EPG display mode Daily mode Displays information of the program schedule in daily mode Weekly mode Displays the information of the program schedule in weekly mode Reminder Press the GREEN button once to set a program reminder When the reminder triggers at the set time the TV will switch to the specified channel automatically Record Press the RED button to quick set a scheduled recording according to the program shown on the EPG To manually edit the timer record before it is added to the recording schedule press the REC button instead Previous Next Day Press YELLOW BLUE buttons to display schedules up to 7 days in advance be 2 le gt a Service 25 Recording Operation Recording Press REC on the remote control to start recording immediately in DTV mode NOTE a A compatible USB memory device must be connected to the TV b Ensure that the USB device has enough speed and data space Press the STOP button to exit the recording mode You will be prompted to confirm Do you want to stop Recording i 1 x us DEN T _ mx E 937 2937 M Press the REC LIST button to display the Recorder List to play a selected recording You cannot play a recorded file while recording is still in progress You can also view and play the recorded prog
8. Otherwise the TV may become unstable and could tip over to cause damage and injury 2 Do not force the TV to turn to the side more than the stand allows Do not tilt the screen up or down Doing so may damage the stand and cause the TV to become unstable DVD Operation Maintenance and Service Side view Wall Mounting Information Wall Mounting optional Your LED TV is able to accommodate wall mounting with the use of a wall mount bracket not supplied please contact your local hardware store and the mounting hole screw size M4X10mm on the back of the unit If the TV stand is already installed remove it prior to wall mounting Please refer to the figures and procedure below Removing the stand NOTE Make sure the power is completely disconnected and unplugged before starting 1 Place the unit face down on a soft surface 2 Loosen and remove the screws securing the stand to the TV 3 Gently remove the stand 2s 4 To reinstall the stand place the unit face down on a soft surface and reverse the aboveinstructions 5 5 q Ie 2 Basic Operation Fall prevention NOTE Important safety measure To prevent the TV from tilting forward and falling over to cause damage or injury please secure the TV to your table or wall using screws or eyebolts and strong cord not provided An example on fixing the TV to a table is shown below 1 Insta
9. 1300 553 315 teacservicesupport awa com au WWW teac com au i ELA WARRANTY INFORMATION v1 5 2 DEC 2011 Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure Warranty Terms amp Conditions 1 TEAC warrants that this product is free from defects in material and workmanship under normal domestic use with reasonable care and skill Maintenance and cleaning i e laser head is not covered by this warranty The TEAC warranty only applies to TEAC products purchased used and serviced in Australia 2 The benefits to the consumer given by this Warranty are in addition to other rights and remedies of the consumer under a law in relation to goods or services to which the warranty relates being the Australian Consumer Law 3 Refund or replacement via your retailer is available for a period of 14 days after purchase for goods that have been inspected and determined to have a major failure Refund and exchange is not applicable for change of mind 4 Subject to the terms herein this warranty effectively covers the equipment as specified in the Warranty Periods Table below from the date of purchase TE
10. Audio disc JPEG discs 2 When a SVCD or VCD disc is loaded and playback control PBC is on press the MENU button once to switch PBC off The player can now playback in sequence mode To turn PBC back press the MENU button again 3 When the disc is stopped press the Play button to start play back in Sequence mode This is for all compatible discs except VCD and SVCD Additional operations Selecting Tracks Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs 1 When playing a DVD disc press the numeric buttons on the menu or title page to select tracks During DVD playback you can input desired title numbers directly 2 During sequence playback of a SVCD or VCD disk press the numeric buttons to select tracks During Program Playback and when the playback control PBC is on you can only press Prev Next M button to select As for CD HD CD discs press Numeric buttons directly to select tracks When playing WMA Digital Audio disc JPEG discs press Numeric buttons to select different tracks on current track list Skipping Tracks IB O a 2 a Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs 1 To skip forward to the beginning of the next title chapter track on a disc press Next on the remote or the right side of the player Maintenance and Service 2 To skip backward to the beginning of the precedin
11. DTV mode Picture Auto Search Sound DTV Manual Search o Feature ATV Manual Search E Menu Return Exit Exit Description Channel Management Enter the Channel management menu to edit the channels OSD Menu Operation m 5 E 5 DELETE Press the RED button to mark the channels you want to delete You will be prompted to confirm when you exit this menu LOCK Reminder To activate channel locks Lock Enable must be set to ON from the FEATURE submenu Press the GREEN button to toggle channels to be locked While locks are enabled these channels will require a 4 digit password default 0000 for viewing access SKIP Press the YELLOW button to toggle channels to be skipped when flipping through channels using the CH buttons These channels will still be listed in the EPG SWAP Press the BLUE button to mark the channel to be moved Press the N V buttons to move it to its new location in the list Press the OK button to confirm the move Recording Operation Favourite Management Add or remove favourite channels to up to 4 Favourite lists using the colour buttons Available Favourite lists can be accessed with the CH FAV button while watching DTV DVD Operation Maintenance Service a lied m ravi Fav Fava Brava 16 OSD Menu Country Select the country NOTE If Channel Locks has been enabled Feature gt Lock subme
12. Play compatible movie files from USB n 00 00 20700 06 36 Nam gt De CECI i ul Press the lt gt buttons to select the options on the toolbar and OK to confirm NOTE Press OK to display and use the control bar after it has disappeared 11 Play Pause the movie Stop and exit the full screen playback 44 Fast rewind or forward Play the movie in slow mode I gt Skip forward in small steps Press once to set Point A a second time for Point B Playback will loop until it is stopped 4 gt Play the previous or next file immediately Ed Display the playlist Display information about the current file Display the movie setup menu to adjust options for the Program Subtitle Audio Repeat Mode Input HH MM SS to start playback from the specified time point in the movie track 4 eBook Display text files from USB DEBUG 97 10 2201 I4 1 234 CknertaniPbige New DEBUG 07 10 2201 41 250 OnCreate 113135104 DEBUG 07 10 22 01 41 2750 O SyC User Login DEBUG 07 12 2154 53078 O spra s OnConnect DEBUG 07 12 2154 53 093 CIlmportantPlugin New DEBUG 07 12 21 54 53 125 AUCa sbt OnCreate 103960056 DEBUG 07 12 21 54 53 125 O Su C s User Login CER S ap I gt P Turn to previous next file 44 bb Turn to previous next page of the text RED button Add or delete a bookmark GREEN button Go to
13. a _ battery seek medical attention _ immediately Do not display still images and partially still images on the LED panel for more than 2 hours as it can cause screen image retention This image retention is also known as screen burn To avoid such image retention reduce the degree of brightness and contrast of the screen when displaying a still image Watching the LED TV in 4 3 format for a long period of time may leave traces of borders displayed on the left right and centre of the screen caused by the difference of light emission on the screen Playing a DVD or a game console may cause a similar effect to the screen Damages caused by the above effect are not covered by the Warranty Displaying still images from Video games and PC for longer than a certain period of time may produce partial after images To prevent this effect reduce the brightness and contrast when displaying still images User Guidance E 5 3 Recording Maintenance Basic Operation OSD Menu DVD Operation Information Operation Operation Service Important Safety Instructions Warnings and Precautions To prevent any injuries the following safety precautions should be observed in the installation use servicing and maintenance of this equipment Before operating this equipment please read this manual completely and keep it nearby for future reference 1 Read these instruct
14. change Password Maintenance and Service 3 DVD Operation Old Password New Password firm Default Reset the DVD settings to the original factory settings by choosing RESET and pressing the OK button A F lt Preference Page m Disc Menu Parental Password LZY ee Default Load Factory Setting be 2 le gt e Maintenance and Service 38 Troubleshooting Do not use other functions that are not mentioned in this user manual f a problem occurs with your LED TV please take the following steps first f you still have the problem turn the power off and contact your dealer or an authorized service center Problem The picture does not appear The picture appears too slowly after the power is turned on Screen is too bright or too dark Screen is too large or too small Stripes appear on the screen and it shakes The screen does not move Screen appears but there is no sound Remote control does not work Picture is distorted USB not playing Action Is the power plugged in Insert the power plug Press the power button on the remote control Like your computer the TV has to run a number of diagnostic and software checks before it can display any broadcast channels The picture should appear in approximately 15 seconds Perform brightness adjustment or contrast adjustment Adjust the as
15. on the screen before disappearing PC Setup Change the PC Settings in PC mode OSD Menu x 5 E 5 Operation Auto Adjust Adjust the parameter of the screen automatically H V Position Adjust the horizontal vertical position of the screen Phase Adjust the phase of the ADC sampling clock relative to the sync signal until a stable image is obtained Clock Adjust the pixel clock frequency until the image size is maximized for the screen Recording Operation Blue Screen Changes the background colour when there is no input between clear and a blue background Not available in some input modes like ATV Restore To Default This clears all the TV settings for the television Password input required System Info Display the TV system information and customer support information DVD Operation Maintenance and Service 20 Multimedia Operation Basic Operation 1 Press the INPUT button on the remote control to display the input source menu select Media source with the N V buttons and press the OK button to enter the Multimedia menu as shown below 2 Insert a USB memory device such as a thumb drive Depending on what you wish to play choose the corresponding Media Mode Photo Music Movie eBook The directory of your USB device will be shown ag m Photo UL ee cHe Paget Eater Operation hints 3 Press AVV buttons to select a desired device fo
16. or creatures into the product 13 Noone is authorised to assume any liability on behalf of TEAC or impose any obligation on it in connection with the sale of any equipment other than as stated in this warranty and outlined above 14 TEAC reserves the right to inspect and verify whether the product is exhibiting a major failure as claimed by customers retailers 15 LED dead pixel policy please contact TEAC Customer Support Hotline on 1300 553 315 for assistance Contents Safety Precautions POWE SUDD EE 1 HSMN uU 2 RES ESL SUL 3 Irnportant Sarev INSIUMCHONS usce on ct poesi ciet Unio plate ecl unt ib Me M 4 5 User Guidance Information PIXO He Stand sisean 6 Wall MOUNTING enra a a e O E E T buE Bodas 7 Accessories Names of Each Part Front View 8 Names Of Each Parti Back VIOW scciastsctedsesvi uires evoca re Bouger va eda eee rete da aute us 9 Remo COMMUN Pc rcm 10 11 Basic Operation BASIC OPE AON RN ES 12 13 OSD Menu TPG TORE I MeL 14 2 SQUND MENU Ic 15 OB CHANNEL MENU ciori ai du T NT 16 17 Feature a a aea E a eE N alee eee 18 19 BOC HUD MEN 20 Multimedia Operation
17. switch itself off automatically if it has not been issued any new actions for a set amount of time Choose from 1H 2H 4H or OFF Hearing Impaired Switch on this feature to display additional on screen information and subtitles Subject to content from broadcaster DVR File System See page 24 26 HDMILink Compatible devices connected by HDMI may be able to receive commands through the HDMI Link Make use of this feature for the convenience of operating the connected device directly using the TV ONLY available in HDMI Input Mode Auto PowerOn Auto Standby Amplifier Control WMove Jk Exit Menu Return Enable HDMILink Turn on off the HDMI Link function Auto PowerOn Enable both the TV and a compatible HDMI device to turn on together Auto Standby Enable both the TV and a compatible HDMI device to Standby together Amplifier Control Turn on off Amplifier Control function NOTE Speaker settings can only be adjusted when Amplifer Control is turned on opeaker Preference Select preferred speakers from TV Speakers and Amplifier OSD Menu Operation Ny 5 5 Recording DVD Operation Operation Maintenance and Service OSD Menu 5 SETUP menu Blue Screen Sound Restore To Default System Info Channel pa Feature Setup Move Enter Exit Exit Menu Return Description OSD Timer Lets you adjust the amount of time the On Screen Menu stays
18. the audio output terminal on the PC USB Connect USB storage devices hard disk drives NOTE Before making or changing cable connections please make sure that power to the unit is completely disconnected by switching off the power supply and unplugging the power cable from the wall outlet Basic Operation OSD Menu i 5 E Recording DD Gp ue od Operation Operation Maintenance and Service Remote Control eFunctions of remote control buttons The remote control is using Infra Red IR Point it towards the front of the TV The remote control may not work correctly if it is operated out of range or out of angle 1 POWER Turn the TV on standby DTV USB INPUT AUDIO MUTE DTV USB Switch to DTV USB INPUT Display the input source menu AUDIO Select different audio languages subject to availability from broadcaster MUTE Press to mute the sound press again or press VOL to unmute PICTURE Press repeatedly to cycle through the available video picture modes SOUND Press to cycle through the different sound settings SLEEP Repeatedly press to scroll to preferred off time ASPECT Adjust picture size PICTURE SOUND SLEEP ASPECT NUMBER BUTTONS Choose channel directly Press number buttons to view the channel GO Return to the previous channel viewed CH FAV Displays Channel List and the Favourite Program List MENU Press to display the OSD menu EXIT Press to exit the OSD
19. AC PRODUCT WARRANTY PERIOD LED LCD TV 32 80 cm and above 1 Year In Home Service Pick up Available All other TEAC products 1 Year Carry in Service 5 In Home Service Pick up Service This service will only be provided as part of this warranty if all the following conditions are met a The product is indicated in the Warranty Period Table b The product is within the warranty period c The product is located within the normal service area of the local TEAC Authorised Service Centre If TEAC determines that the product is not repairable on site TEAC can complete the repair by taking the product to a TEAC Authorised Service Centre Carry in Service Where In Home service Pick is not available the purchaser is required to send the product to the nearest TEAC Authorised Service Centre for repair In this event proof of purchase is required to support a warranty claim After the repair the product will be available for collection by or return to the purchaser at a fee upon request TEAC in home service can be made available at a fee upon request 6 A 12 month replacement warranty is applicable to all Accessories such as Remote Power Adaptors and Cables 7 TEAC will ensure to the best of its abilities that all required parts are made available for any required service repair 8 TEAC Australia Pty Ltd and its Authorised Service Centres will use their best endeavours to complete product repairs within a reasonable period
20. TEAC LEV3294HD LED ITV USER MANUAL IMPORTANT WARRANTY INFORMATION INSIDE PLEASE READ WARRANTY PROCEDURE v1 5 2 DEC 2011 Please read the owner s manual carefully and ensure that you have followed the correct installation and operating procedures 1 Please read this warranty card 2 Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service 3 If you require Warranty Service please contact the TEAC Customer Support Hotline at 1300 553 315 for assistance Please ensure that you have the model number serial number and purchase receipt ready when you call Please complete the section below and keep this information for your own records Owner s Name Owner s Address Postcode Model Name No Serial No Dealer s Name Dealer s Address Postcode Authorised Service Centres in Major Australian Cities NSW Queensland Western Australia 151 Arthur Street Unit 1 320 Curtin Ave West Unit 2 50 Pilbara Street Homebush West NSW 2140 Eagle Farm QLD 4009 Welshpool WA 6106 South Australia Victoria 11 McInnes Street 282 Normanby Road Ridleyton SA 5008 South Melbourne VIC 3205 Thank you for selecting a TEAC product If you should require assistance with your product regarding its setup or operation or if any difficulties arise please call us directly for advice between Monday to Friday at 8 30AM 6PM AEST at the TEAC Customer Support Hotline
21. TLE SO TV TXT CANCEL REVEAL REPEAT HOLD SIZE SUBPAGE INDEX DELETE REC LIST SCH LIST SCREEN Buttons for USB DVD operation REC Press to start recording the program in DTV mode Load eject DVD disc B Stop program 4 Previous chapter gt gt Next chapter gt Il Play Pause program 44 Fast reverse gt gt Fast forward Buttons for TELETEXT operating Teletext is an information system broadcasted by certain channels which can be consulted for news weather forecasts puzzles etc and also offers subtitles for viewers with hearing problems or who are not familiar with the transmitted language Subject to availability from your service provider TV TXT Turn off on the Teletext display CANCEL Cancel the Teletext display REVEAL Reveal any hidden text HOLD Hold or carry on the current subpage SIZE Press to see top half of page double size Press again to see the bottom half of page double size Press again for normal size SUBPAGE Press to subpage again to cancel INDEX Go to index Colour buttons Short cuts follow the coloured links on screen 11 Basic Operation OSD Menu m 5 3 Operation DVD Operation Recording Operation Maintenance and Service Basic Operation Operation i 5 E Recording DVD Operation Operation Maintenance and Service Basic Operation The following section conveys the unit s general ope
22. based on available resources and workload during the time when service is requested and performed 9 Refurbished parts may be used to repair the product In the case of a replacement the product may be replaced with a refurbished unit of the same type or if one is unavailable a similar refurbished model with equal or better features amp specifications 10 Please be advised that if the product presented for repair is capable of retaining user generated data the data may be lost during servicing Customers are strongly encouraged to back up all important information data before sending the product in for service repair 11 Service will be provided only during normal business hours and under safety conditions and circumstances TEAC and its authorised service agents can refuse any repair if safety in relation to OH amp S becomes a concern to its staff or authorised service agents personnel 12 The warranty is void and warranty claims may be refused subject to the Australian Consumer Law if a The product was not transported installed operated or maintained according to manufacturer instruction or b The product was abused damaged tampered altered or repaired by any unauthorised persons or c Product failure is due to accidents during use installation or transit power surges use of defective or incompatible external devices exposure to abnormal conditions such as excessive temperatures or humidity or entry of liquids objects
23. d before inserting the disc contents of each disc may vary as to how the disc was authored and what features are included Some discs have an autoplay function Some offer different modes such as Menu Play Sequence Play and other modes as illustrated below Menu Play Compatible with DVD SVCD or VCD2 0 2 fthe disc is a DVD a ROOT MENU will appear on the screen If it is SVCD or VCD 2 0 please press the Menu button to see the menu 3 When a DVD disc is loaded use the toggle buttons to highlight the menu item you would like to choose With SVCD or VCD 2 0 press the numeric buttons to select a track to play m G in a 2 a Press OK or Play to start when highlighted Return to Menu when Playing When playing a DVD disc press the Menu button to return to the ROOT menu When playing a SVCD or VCD and Playback control PBC is on press the Menu or Return button to return to the disc menu Service 27 DVD Operation Title Play 1 DVD disc dependant only according to DVD manufacturer specifications During DVD playback press Title button to display the DVD title content and main menu Press the V buttons to highlight the title you would like to choose and press OK you can also opt to press the numeric buttons 4 The DVD player begins with the chapter 1 of the chosen title Sequence Play 1 Compatible with DVD SVCD VCD CD HD CD WMA Digital
24. d from the wall outlet Moving the unit with the power cord connected to the outlet may cause damage to the cord resulting in fire or electric shock Wipe off any moisture dirt or Failure to do so may result in _ fire or electric shock DO NOT allow children to climb _ onto the unit The unit could topple over onto a child and result in Serious injury _ If you notice any unusual odors or smoke around the unit _ from the outlet and contact the Service center Failure to do so may result in fire or electric shock _ Always turn off the unit and unplug the power cord when cleaning the unit Use a soft dry cloth to clean the unit Never clean with irdustrial _ strength polish wax benzene paint thinner air freshener lubricant detergent or other such chemicals Also do not clean with a damp cloth DO NOT dismantle or modify the unit in any way Do not attempt to _ Service the unit yourself Doing so may result in fire or _ electric shock If the unit requires repair contact the service center A Warnings _ When removing the batteries i j from the remote control make immediately disconnect the unit _ sure children do not swallow _ them Keep the batteries out of the reach of infants and children If a child has swallowed
25. e Colour Adjust image colour saturation i D Operation Tint Control the tint available in NTSC mode only Colour Temperature Select a preferred color temperature mode Standard Cool Warm Aspect Ratio Change the picture s aspect ratio Auto 4 3 16 9 Zoom1 Zoom2 Cinema Just Scan Noise Reduction If the broadcast signal received is weak you can select the Noise Reduction option to reduce the video noise level Off Low Middle High Backlight Adjust the backlight DVD Operation REC Orang Operation Maintenance Service OSD Menu 2 Sound menu sound Mode 4 cc D E Sound ee Surround Picture Channel Ti Feature Setup a Move Ok Enter Exit Exit Menu Return Description Sound Mode Select your desired sound mode Standard Movie Music Speech User Bass Adjust the level of the lower pitched tones Treble Adjust the level of the higher pitched tones Balance Adjust the audio output between left and right speakers Surround Turn on off the surround sound function Auto Volume Level AVL Turn this function on to auto adjust volume levels from different input sources SPDIF Select the SPDIF mode for the TV Off PCM Auto OSD Menu 5 5 3 Recording Operation Operation Maintenance Service OSD Menu 3 Channel menu In ATV
26. e Title being played Total number of titles Chapter Chapter being played Total number of chapter Time Elapsed time of disc playtime Language Language selection Number of optional languages Language Type Audio Type Subtitle Subtitle selection Number of optional languages Angle Angle being played Number of playing angles Disc Type Title Title being played Total number of titles Chapter Chapter being played Total number of chapter Time Countdown of chapter time Disc Type Title Title being played Total number of titles Chapter Chapter being played Total number of chapter Time Title elapsed time Disc Type Title Title being played Total number of titles Chapter Chapter being played Total number of chapter Time Countdown of total time SVCD Display feature When the DISPLAY button is pressed repeatedly while a SVCD is being played the response will show as follows e Disc Type Track Track being played total tracks Mute PBC Repeat Mode Elapsed Time e Language Language being played Total Number of languages Language Type Audio Type Subtitle Subtitle being played Total number of subtitles VCD Display Feature When the DISPLAY button is pressed repeatedly while a VCD is being played the response will show as follows e Disc Type Track Playing track Total Number of tracks Mute Repeat Mode Elapsed Time E thea a 2 a CD HD CD WMA Digital Aud
27. etup Preference Page tem selection in the Setup Menu is done by using the Navigation Arrows SETUP button and the OK button Press the SETUP button first enter into SETUP menu then press the DIRECTION RIGHT button you can enter into the next Sub menu Press the SETUP button again to exit the Setup Menu OSD Language This is used to select the OSD language COMO General Setup Page OSD Lang J 5 Last Memory be Q Q le A 2 Maintenance and Service 32 DVD Operation Screen Saver Enable the screen saver the screen saver image will appear when the player stops or the picture is frozen for a few minutes Screen saver will prevent image burn and screen damage On Start the screen saver e Off Remove the screen saver as General Setup Page Screen Saver off Last Memory Off Screen Saver Last Memory The Last Memory function can memorize where disc playback was stopped and resume from there when the same disc is inserted again This function can memorize up to 4 discs and is dependent on the disc content Select On to enable the function and Off to turn it off On Start the memory Off Remove the memory EI General Setup Page be Last Memor y S 9 5 A Set Last Memory State z gt a Maintenance and Service
28. exit the full screen slideshow 4 gt Play the previous or next file immediately Rotate the picture 0 90 180 270 Zoom in out on the picture Move around in a zoomed in picture using the direction buttons Q Display information about the current file Display the photo setup menu to adjust Repeat Mode Background Music Slide Time Effect Ed Display the playlist Press the MENU button to hide it again 2 Music Play music files from USB Music Player Multimedia Operation Gerral rist Girls love Wind Swiff 8 55 Recording Operation 00 00 08 00 03 20 eo Um Seo Th Wore m OK Press the lt gt buttons to select the options on the toolbar and OK to confirm 11 Play Pause music playback Stop and exit music playback 44 gt P Fast rewind or forward 14 gt Play the previous or next file directly Input the time in HH MM SS to start playing directly from the specified time point on the music track Select to cycle through these playback modes Repeat All Shuffle Repeat Folder Repeat 1 Toggle the window display between File Information and Playlist Select this or press the BLUE button to switch off the screen display NOTE This is NOT Standby Turn the screen on with any button on the remote other than the POWER button E ies a 2 a Maintenance and Service 22 Multimedia Operation 3 Movie
29. g title chapter track on a disc press Prev the remote 28 DVD Operation Multispeed Fast Motion Play Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio discs 1 Press the Multispeed Fast Forward button on the remote during play to search through disc Multispeed Fast Forward has four speeds 2 x4 x8 x16 x32 With each consecutive press of the button the search speed increases If you press the button five times it would resume normal play 2 During DVD playback normal play resumes when Fast Forward reaches the beginning of the next title chapter During SVCD or VCD play with PBC on when Fast Forward reaches the beginning of the next track it resumes normal play Freeze Frame Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs During CD HD CD WMA or Digital Audio disc JPEG playback press Pause 1l once to freeze playback Press Play button to resume normal playback we thea le a 2 a Maintenance and Service 29 DVD Operation Display Features This feature aids the user in viewing options readily available and is compatible with the following disc types DVD SVCD VCD CD HD CD WMA Digital Audio discs This display is available while the files on the disc are being played DVD Display feature When the DISPLAY button is pressed repeatedly while a DVD is being played the response will show as follows Disc Type Titl
30. hedule a new recording Follow the button hints on the screen 24 Recording Operation Recorder Turn on off recording If it is off the scheduled item is set as a Reminder Type Select the type of content DTV Radio Channel Select the channel Start Date Set the start date Start Time Set the start time End Date Set the end date End Time Set the end time Mode Select the repeat mode Once Daily Weekly Monthly Record List cM EE Delete Press the RED button to delete the 2009 06 19 14 41 57 14 42 08 selected recording reminder schedule BBC NEWS 24 20 12 09 DO 12 09 55 Recorder Start Press OK to start recording Alternately use the REC button on the remote control directly while watching DTV EPG Timer Record and Reminders Press EPG on the remote control to display the EPG menu It may take a couple of seconds to load YLE TV1 07 12 2005 1836 07 12 2005 18 15 07 12 2005 1903 Syd men asialla E Likainen Len Mike tutki maaty laisen kuolemalla yhteytta lukuisan elainten kuolemiin Alfred saattaa Davidin nousuveden vangiksi Stereo 2 YYLE TV2 Event info De 5 YYLE FST aires Nain tehtin 5 5 B YYLE24 Haie No Event Info A 9 YYLE Teema 20 00 20 01 Tv uutiset s 1 YYLE PEILI ive No Event Info 2 YYLEQ ribet ESI FIamantaito _ Mi Recorder Reminder Bl Prev Day m Next Day avar
31. icing is required when the apparatus has been damaged in any way This symbol indicates that dangerous voltage instituting a risk of electric shock is present within this unit This symbol indicates that there are important operation and maintenance instructions in the literature accompanying the appliance NOTE a To prevent damage which may result in fire or hazards the unit should not be exposed to rain or liquids b Do not place objects containing liquids such as vases on the unit If drinks or liquids have been spilled on the unit unplug the unit from the power source and refer to TEAC service personnel for assistance C Servicing of this unit should be conducted by qualified and certified TEAC service personnel d The manufacturer will not be held responsible for any damage caused by any modifications done on the product without authorisation from the manufacturer s authorised service agent Inform Basic Operation OSD Menu i 5 E Recording SRI OE Operation Operation Maintenance and Service Fixing the stand 1 TV and stand parts First of all please check that you have all of the parts and that there is no visible damage If a part is missing or appears damaged please DU contact the TEAC Customer Service Hotline at 1300 553 315 2 X STA x 16F 5 X STA x 12 5 X ST4 x 16F Stand Screws supplied Neck 2 Installi
32. ilable on the disc If it is not available the default language will be used Preference NEM Subtitle ENG Engish Disc Menu ENG Parental Password 3 4 Portuguese i cj Preferred Subtitle Language Disc Menu Choose a preferred menu language to be used if it is available on the disc If it is not available the default language will be used Preference Page 2 Disc Menu ENG English Parental French Password E Default Preferred Menu Language be 2 le gt n Maintenance and Service 36 DVD Operation Parental When playing discs with parental lock function you may select an Age Control Grade according to disc rating and your own preference For example if PG is selected DVD Video disc rated higher than PG cannot be played e KID SAF e PG e PG 13 e PGR e R e NC 17 e ADULT Pr renence e N Enix Subtitle Disc Menu 3 PG Parental _ Password Default Set Parental Control Password User can change the password that is required when the user wants to change the Age Control Grade in the Parental Lock function NOTE Default password is 123456 Preference Page Ww FA Subtitle Disc Menu Parental Pass word Defauit be Q
33. io JPEG Discs Display Feature When the DISPLAY button is pressed repeatedly while a CD HD CD WMA or Digital Audio JPEG disc is being played the response will show as follows e Disc Type Track laying track number Total Number of tracks Mute Repeat Mode Elapsed Time Maintenance and Service 30 DVD Operation Using the Search Feature Compatible with DVD SVCD VCD CD HD CD discs Press the GOTO button on the remote control to bring up the search Display Feature menu ll Press the Arrow buttons to highlight the Title Chapter Track Number Time Elapsed options Il Use the Numeric buttons to enter the Title Chapter Track number or Time you would like to view in the title IV Press OK to resume playback To illustrate entering 01 23 56 on the Time Elapsed selection will start the playback from that time frame forwards NOTE a This feature does not work in Program Play mode b If PBC is on it will turn off automatically when Search Playback starts c When playing WMA MP3 JPEG discs Search Feature does not work Changing the Audio Soundtrack Language Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs This function varies in its purpose for different disc types Press the AUDIO button to display the current Soundtrack being played Audio Selection for SVCD or VCD There are five audio selections available Stereo L R L L R R L L Auto A D Detect and R R Aut
34. ions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions Basic Operation 5 Clean only with a dry cloth 6 Do not block any of the ventilation openings Install in accordance with the manufacturer s instructions OSD Menu 7 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 8 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety When the provided plug does not fit into your outlet consult an electrician for replacement of the power socket Multimedia Operation 9 Do not bend the power cord excessively Fevent the cord from being walked or pinched by weights placed on it 6 5 o9 0 0 10 Only use the attachments accessories specified by the manufacturer 11 Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus DVD Operation Maintenance Service Important Safety Instructions 12 Unplug this apparatus during lightning storms or when unused for long periods of time 13 Refer all servicing to qualified service personnel Serv
35. lder Press the OK button to enter the file list below Photo Return to ams Retur previous a oy 7 1 folder list I Pg ee 157 4pg 465 RU oU Preview 162 jpg 3 list 164 jpg a File information Koemgsegg Agera R 70127 01 miDelete Add Del all to playlist CFT CH 5 Ok Enter Ext Esi Hints Press N V buttons to move through the list Press OK to select the file or enter the folder Press OK to add or remove a selected file to the playlist Press the RED button to delete a selected file Press the GREEN button to add or remove all files to from playlist Press lt to return to the previous folder Press EXIT to choose the folder view list or thumbnail view Press EXIT again to return to the Multimedia menu Press the gt PLAY button to start playback of all selected files See more on playback in the next pages Press STOP to stop and exit full screen playback 21 Multimedia Operation Recording Operation 5 le a 2 a Service Multimedia Operation 1 Photo Run a photo slideshow from USB Medtnh ole B Press the lt gt buttons to select the options on the toolbar and OK to confirm NOTE Press OK to display and use the control bar after it has disappeared 111 Play Pause the photo playing Stop and
36. ll a wood screw or eyebolt into the table that is supporting the TV 2 Fixa machine screw into a screw hole near the base in the back of the TV 3 Tie the wood screw or eyebolt to the machine screw with a strong cord OSD Menu Multimedia Operation Alternatively secure the TV to the wall directly behind it by fixing eyebolts to the wall and tying them to screws fixed on the centre of the TV back panel How to mount the LED TV on the wall 1 After detaching the stand fasten 4 mounting screws thread size M4X10mm NOT SUPPLIED Please contact your local hardware store into the 4 screw holes on the rear cover see the figure below 2 Fasten the wall mounting bracket NOT SUPPLIED please contact your local hardware store with screws to the wall 3 Carefully check for the strength of the connection before releasing the LED TV NOTE For more detailed instructions please refer to your after market wall mounting instruction book 200mm 6 Ce o9 Oo 0 Z oO DVD Operation nnn et and Service Maintenance o rS m 45 ON 9 e ana Thread hole size 4 x 10mm depth Accessories User s Guide a IN O i 5 5 c or o User s Guide Remote Control 2 x AAA Batteries Quick Start Guide Contact Card N Accessories included may look differe
37. may result in a fire precautions It is the responsibility of the user to make sure all precautions and warnings are heeded and followed DVD Operation Maintenance and Service Installation EE DO NOT place containers DO NOT place the unit where DO NOT use or store flammable DO NOT place the unit on an unstable liquids such as vases drink cans is exposed to rain excessive combustible materials near surface such as a sloped table or any bottles or small metallic objects moisture or grease the unit _ stand with a contact area smaller than on top of the unit l o the bottom surface of the unit stand e Doing so may result in fire 2 Doing so may result in fire 9 If liquid enters the unit or any electric shock malfunction or explosion Placing the unit on a flat stable surface 5 metal object falls into the unit it deformation can prevent accidents from happening E may result in a short circuit fire Ignoring this precaution may result in the 8 electric shock unit toppling over and causing injury O 5 Fd iw K E P E d in S o 2 le 2 DO NOT place a burning candle DO NOT place the unit in a poorly DO NOT run power cords near Install the antenna away from a burning incense or lighted ventilated enclosure such as heat pr
38. menu CURSOR KEYS 4 Allows you to navigate through the on screen menus and adjust the system settings to your preference CH A Y Channel Program VOL lt P gt Volume Not available in DVD Input mode EPG To show the Electronic Program Guide DISPLAY Press to display the current mode s information OSD Menu Se 9 ww ES g 5 5 VOL Volume SUBTITLE Select available subtitles in DTV and DVD mode A B During playback trigger A B looping playback by pressing once to park point A and again to mark point B Stop looping playback by pressing PLAY PAUSE or STOP GOTO Play your favourite title chapter track D SETUP DVD system setup eo c D MENU DVD play list Disc menu D TITLE DVD title u aan C REPEAT Repeat playing the title or chapter DELETE Delete REC program REC LIST Record List SCH LIST Display Scheduled Recordings list SCREEN 1 While playing music press this button to turn off the LED TV screen 2 While in HDMI input press this button to change between Video and PC mode 3 While in VGA PC input press to auto align screen D SETUP D MENU D TITLE TV TXT CANCEL REVEAL REPEAT DVD Operation Recording Operation Maintenance and Service 10 Remote Control DTV USB INPUT AUDIO MUTE PICTURE SOUND SLEEP ASPECT Cz MENU EXIT D SETUP D MENU D TI
39. ng the stand Put the TV face down on a soft and flat surface blanket foam etc to prevent damage and scratching to the TV Put the neck onto the back of the TV set as shown below and attach the neck with the supplied screws 5xST4X12F User Guidance Information When attaching make sure the screws are attached tightly If the screws do not attach tightly it will lead the TV to be unstable or may even tip over Basic Operation 2 x STA x 16F 5 x ST4 x 12F OSD Menu Put the stand to the neck of the TV set as shown below and attach the neck with the supplied screws 5xST4x16F N F 1 Before you put on the stand please make sure the direction is correct as shown below NO oe C X 2 When you are putting on the stand please make sure the neck of the I TV set is in the correct position and attached tightly 3 When attaching the stand make sure the screws are attached tightly NOTE If you do not attach correctly and tightly it will make the TV unstable and may tip over 5 Operation 25 o O Q o 2 3 Warnings CAUTION 1 All parts must be positioned correctly and all screws must be fixed tightly
40. nt from the illustrations shown Basic Operation Names of each part Front View 5 c a 0 o DVD Insert a 12cm DVD CD with the label side Ge ps facing towards the o back 5 Q le 5 Te o S Qo x oO LED Indicator Remote Control Sensor INPUT MENU CH CH VOL VOL PLAY EJECT POWER keep clear of obstacles DVD Operation INPUT Display the input source menu MENU Display exit the OSD menu CH Scan through channels VOL Adjust the volume PLAY Play Pause DVD program EJECT Load eject DVD disc POWER Turn on standby the TV set Maintenance and Service Names of each part Back View Pb AC POWER IN B 6 Y COAX a a 5 000 C Headphone out HDMI2 VIDEO Lin Rin RF AC POWER IN Connect to AC power supply SWITCH Turn on off the power supply Headphone out Connect to your headphones or other audio equipment HDMI1 2 3 Connect to the HDMI output of external devices like DVD players with a HDMI cable VIDEO Connect to video output terminal of external devices L R in Connect to the audio output terminal of external devices shared with YPbPr RF Connect an antenna or a 75 Ohm coaxial cable to receive a TV signal COAX Digital output to AV receiver YPbPr Connect to the YPbPr video output sockets of external devices VGA For PC video input Connect to the VGA RGB plug on the PC PC IN Connect to
41. nus first enter the current password default 0000 to enter the Auto and Manual Search menus Auto Search Select the desired search mode and then press the OK button to start Auto Channel Search Note 1 ALL Auto search channels for DTV ATV and radio DTV Auto search channels for DTV and radio ATV Auto search channels for ATV 2 During the auto tune process you can press the MENU button to stop auto tuning and return to the previous menu DTV Manual Search Press V buttons to select the Channel field and the X gt buttons to select the channel Select the Start button and press the OK button to start Manual Channel Search a ENNEESE C ONNN 2 Band Widtn M iz lt 7 OSD Menu gg es 45 es 04 Operation iy 5 5 DVB T ATV Manual Search Recording Operation DVD Operation 1 Feature Move Enter Ext Eset Return Current Channel Select the channel for manual searching search Press the OK button to enter the search menu and set the frequency with the lt gt buttons Fine Tune Press the OK button to enter the Fine Tune menu and adjust the frequency with the lt gt buttons Color Sound System Select the Color Sound system for the program Maintenance Service 17 OSD Menu 4 Feature menu a A Hearingimpaired 80
42. o A D Detect With each consecutive press of the button the audio selection cycles through these options For example if you press the button six times the audio selection cycles back to Stereo Audio Selection for CD HD CD WMA Digital Audio Discs There are three selections available Stereo L R L L and R R Audio Selection for DVD and SVCD When playing a DVD or SVCD disc press the AUDIO button to display the current audio language Press the button again to browse and select the next supported audio language NOTE Certain DVDs have limited language selections or none at all Subjective to manufacturer specifications 31 c IB fess a 2 a Maintenance and Service DVD Operation Basic Operation Press the Power button on the TV or the remote control then press the INPUT button to select DVD mode If there is no disc in the DVD player the screen will show NO DISC Insert a disc with the label facing the correct direction according to the picture next to the disc slot Do not touch the disc s reflective surface Hold the disc at the edges with your fingers and gently place the disc into the slot The player will automatically draw the disc into the player To eject the disc press the EJECT button on the TV or the EJECT amp button on the remote control DVD Setup Mode Setup Mode provides the menu for the configuration of General Setup Page Audio Setup Page Dolby Digital S
43. oducing appliances such high voltage power lines and cigarette on top of the unit cabinet as radiators stoves or irons communication cables Make sure DO NOT place the unit near l itis installed securely any heat source such as afire so poses a serious risk _ The excessive heat can melt _ If the antenna touches a power line 5 place or space heater the insulation and expose live contact with the antenna may result 9 _wires resulting in fire or electric jn fire electric shock or serious ini i i i outbreak us Injury Doing so poses a serious risk shock e of overheating and possible fire outbreak Pen 5 5 Operation Install the unit at an adequate Do not cover the unit with a _ Be sure to place the unit on a De distance from the wall to ensure tablecloth curtain or other level surface 2 sufficient ventilation material 5 9 Insufficient ventilation may result Insufficient ventilation may 8 z in the unit overheating which result in the unit overheating x oO may cause a possible fire which may cause a possible outbreak fire outbreak DVD Operation The following precautions are divided into Warnings and Cautions Disconnect this device from power by turning the power off at the AC power outlet and unplugging the AC plug
44. pect settings Keep any appliances that emit magnetic radiation away from the TV Press the PAUSE button Check if the Pause button is pressed on external equipment 1 Check if the MUTE function has been activated 2 Increase the sound level by pressing volume adjustment button 3 Check if sound terminal of external input is connected properly 4 Check if audio cables are connected properly 5 Select and check the other input If the sound still does not work and the other channels are the same after you have done as the above contact your dealer or an autorized service center 1 Check if main power is On 2 Check that the batteries of the remote controller were loaded properly 3 Check to see if any obstacle exists between the LED TV and the remote control then remove it if any 4 If the batteries have no power replace them with two new batteries Compression of video contents may cause distortion especially on fast moving pictures such as sports and action movies Low signal level can cause picture distortion This is not a TV issue Have the antenna assessed Please check if the USB is connected properly Please make sure USB disk is compatible and the multimedia data formats are supported see Specifications page 39 S G S i G v 3 6 S v G Specifications 1366x768
45. ram in USB Multimedia input mode Time Shift Press on the remote control to start Time Shift in DTV mode NOTE a A compatible USB memory device must be connected to the TV b Ensure that the USB device has enough speed and data space Press PLAY to resume watching the TV program Meanwhile Time Shift will continue recording A Time Shift indicator in the corner shows the elapsed time between the current picture and the live broadcast Press the STOP button to exit Time Shift and return to watching live TV You will be prompted to confirm Do you want to stop Timeshift Recording Operation 6 G bn 2 a NOTE During recording if the signal is lost the recording process will pause until the signal is stable again Maintenance and Service 26 DVD Operation Preparation 1 Connect the unit to the power supply and press the POWER button to switch the unit on 2 Press the INPUT button on the remote control to select DVD mode and press OK to select DVD mode 3 Gently insert the disc with the label side away from the television into the disc tray slot The disc will be drawn into the disc tray and loaded automatically 4 Press the EJECT button to eject the disc The disc cannot be drawn into the disc tray by pressing the EJECT button again The disc must be manually pushed into the tray until it is drawn in automatically NOTE DVD mode must be selecte
46. ration such as switching the unit on selecting the input source and using the automated channel search command owitching the unit on 1 Connect the television unit to the antenna wall socket using a coax television cable plug 2 Connect the power cord to the power supply and flip the POWER Switch at the back of the TV to the ON position 3 Press the DPOWER button on the remote control or on the television panel 4 The On Screen Display OSD should appear Selecting an input source The unit incorporates multiple input sources which can be selected via the INPUT button on the television panel or remote control The following steps explain the procedures involved 1 Press the INPUT button to enter the Input menu The screen will display the Input Source menu 2 Use the CH button on the TV set or A V direction buttons to select the desired input source 3 Press OK to enter the selected source NOTE Please make sure the corresponding device is connected before selecting the input source 12 Input DTV ATV AV YPBPR HDMI1 HDMI2 HDMI3 PC Media DVD Basic Operation Using the On Screen Display Menu The On Screen Display OSD menu acts as the Main Menu and aids the user in browsing through the different options properties available on the television unit Press the MENU button on the remote control to access the OSD menu as shown below Main menu Picture Sound Channel Feature Setup
47. sing external USB it is suggested that high quality USB extension cables supported 480mHz be used to ensure smooth playing of video files 5 The television unit can only support audio formats of single and binary channels T F LH ED cc 41 TEAC TEAC CUSTOMER SUPPORT HOTLINE TCS 1300 553 315 Between Monday to Friday AEST 8 30AM to 6PM
48. the specified page YELLOW button Display the bookmark list BLUE button Display the playlist 23 Multimedia Operation Recording Operation c x 2 a gt A Maintenance and Service Recording Operation DVR settings Press the MENU button then select Feature gt DVR File System Press OK to enter the menu below Free Record Time nm E Schedule List Record Liat Prete Meru Retum Format DLE MiB MILLE USB device information Format Press the RED button to format the selected USB device CAUTION Formatting will wipe all data from the USB device Please back up existing data before formatting TEAC is not responsible for lost data USB flash drives or an external hard disk using its own power I w supply is recommended for recording and playback The USB storage device will need to be formatted before being used for recording functions to ensure that it is formatted in the FAT32 file system and that there is sufficient storage space available for recording programs Timeshift Buffer Set Timeshift Buffer mode Auto 30Mins 1hr 2hr Free Record Time Select recording time limit from 1 hour to 4 hours ochedule List Enter the Schedule List to setup and manage the timer recording schedule Recording Operation M SW Ri 200S 22 08 4D c S 2 a gt a Maintenance and Service Press the YELLOW button to sc
Download Pdf Manuals
Related Search