technical installation manual vers. 13
Contents
1. Inputs 4 digital inputs low voltage SELV 5V minimum activation current 5mA Active when connected to BUS mass Maximum wiring distance to switch or pushbutton 30m Programmable filter hardware and software from the Development System SIDE Outputs 2 digital triac outputs Switching capacity 30A 230V AC per output To control circuits with higher power interlay a contactor Deactivated Triac open Activated Triac closed Technical characteristics Device Voltage Current Num Switching capacity Reference Supply Consumption Outputs of each output 4E4S 30A 9 16V DC BUS 12mA BUS 4 relay 10A potential free outputs 4E4S 30A output wiring Maximum power per output 30A resistive load Neutral Neutral Key 7 Switch Ve e E i Push Button y BUSing gt 12V A B Ref HX Electrovalve Manual reset Lifting up the device cover you will find the relay switches one per output beh Open Closed 4E4S 30A input wiring All inputs are SELV They are internally referred to 5V and they are activated when connected to Ref2. on off actuators 4E4S 30A ingenium www ingeniumsl com 4E4S 30A 4 digital input 4 digital output Actuator Installation To control 4 electrical loads or 2 blinds curtains 4 digital inputs Low Voltage SELV referred to BUS mass 4 digital outputs power free by model Remembers last position when power fails 2 2 B3 4 Programmable inputs to work with switches or pushbutton Le Ds ea a 2 programmable BUS events each entry DIN rail mounting 4 modules or in a distribution box 70mm depth ingenium Ww ingeniumsl com WBUSing QQOOOCOWOOOOOOD Description The 4E4S 30A is an on off actuator equipped with 4 relay outputs power free with a breaking capacity of 30A 4 low volt age inputs SELV referred to BUS mass From the Development System SIDE is possible to assign sequences of 15 characters for each one of the outputs and entries You can also set the mode of operation of each of the inputs button switch or electric blinds mode and two BUS events for each input one trigger event and one off allowing thus acting on any element of the installation from the device inputs This version of 4EAS is indicated for the control of lighting capacitive outputs appliances etc Not connection available to 230 V so it does not provide power to the BUS rather uses it Also the relays incorporate a manual reset
Download Pdf Manuals
Related Search