technical installation manual vers. 13
Contents
1. It can detect objects through non metallic solids by using radio frequency technology It is superior to infra red detectors from sensitivity to precision It is practical unobtrusive and easy to install and adds elegance to your lighting design Installation in a false ceiling Detection araa The detection area must face the room with the silk screened part of the device Incandescent or halogen lamp 220V cccscscsescseesssecseeecsesecsesecseeeseseeeees SR il face down Incandescent 12V lamps containing mechanic transformer Incandescent 12V lamps containing electronic transformer Applicable power supplies depending on the load 900W Detection area at The device can be partially Fluorescent lamps not compensated 2 5m from the floor blinded with metal tape to e Guaranteed 6x3m cancel detection in a Fluorescent lamps compensated Low factor 400W es Maximum 12x6m zone direction High factor 58W 3HF Estimated power calculated with the losses of each type of lighting Floor Technical Characteristics Device Voltage Power Maximum Secure Adjustment Num Switching Direction of the device Reference Supply Consumption Detection Area Detec Area Parameters Outputs capacity Place lengthwise with the length of the device parallel to the length of the room SR 85 265V AC 4 5mA 230V AC 12x6m 6x3m Sensitivity Time 1 10A Together with the programming this will volt2. age free normally open relay ensure optimal detection Guaranteed area 6x3m Maximum area 12x6m Do NOT install In locations susceptible to vibrations Length side of the room Over fluorescent lights
3. ingenium autonomous detectors Www ingeniumsl com SR SR Hidden 360 Radiofrequency Detector Installation For movement detection with concealed installation Detects movement through solid non metallic objects SR P brick wood etc Detects minimum movements aoc Hidden installation in false ceilings or walls SR output wiring Timer adjustment Min aaua zov cone N E Autonomous opereton no BUSing reduire Power consumption 4 5mA The timer adjuster regulates the time a load f OnOmMOUS operation no e required remains connected ne Automatic reset after detection Timers can be adjusted between 0 25secs Pulse and 17mins at 4sec intervals Minimum timings are obtained by turning the adjustment potentiometer clockwise rey Adjustable timer from pulse to 17min Oo ingenium Adjustable sensitivity up to 12m ees Size 100x75x35mm 3 Peutral Sensitivity adjustments Adjust e eee vote The sensitivity adjustment limits the degree of 1 Load detection Description Maximum distances that can be reached will depend upon the density of obstacles to penetrate This is an autonomous device no BUSing required It is designed to be connected to the lighting in transit areas such O wood plaster brick etc as bathrooms hallways or corridors and garages and installed in false ceilings and walls Its hidden installation makes it immune to vandalism
Download Pdf Manuals
Related Search