technical installation manual vers. 13
Contents
1. appliances etc Not connection available HX Electrovalve to 230V AC so it does not provide power to the BUS rather uses it Also the relays incorporate a manual reset Consumes 12V Inputs A 2 digital inputs low voltage SELV 5V minimum activation current 5mA B Active when connected to BUS mass Ref Maximum wiring distance to switch or pushbutton 30m Programmable filter hardware and software from the Development System SIDE Cable 8x0 22mm Outputs 2 digital triac outputs Switching capacity 2A 230V AC per output To control circuits with higher power interlay a contactor Manual reset Deactivated Triac open Activated Triac closed Lifting up the device cover you will find the Technical Characteristics relay switches one per 7 output DIAA Device Voltage Current Num Switching capacity Reference Supply Consumption Outputs of each output 2E2S C30A input wiring All inputs are SELV They are internally referred to 5V and they are activated when connected to Ref j 2E2S C30A 9 16V DC BUS 12 mA BUS 2 relay 30A i a potential free outputs Open Closed2. ingenium oss www ingeniumsl com on off actuators 2E2S C30A 2E2S C30A 2 digital inputs and 2 digital outputs Actuator Installation To control 2 electrical loads or 1 blind curtain 2E2S C30A output wiring Maximum power per output 30A resistive load 2 digital inputs low voltage SELV referred to the BUS mass Neutral Neutral eutra COOOOC 2 digital outputs with potential free relay Remembers last position when power fails Programmable inputs to work with switches or pushbutton 2 programmable BUS events for each input 24V DIN Rail Mount 2 modules Key wBUSing ODODO mo Plug EAR Switch Description The 2E2S C30A is an on off actuator equipped with 2 relay outputs with potential free switching capacity of 30A output and 2 inputs for low voltage SELV referred to BUS mass e 4 Push Button From the Development System SIDE is possible to assign sequences of 15 characters for each one of the outputs and e entries You can also set the mode of operation of each of the inputs button switch or electric blinds mode and two BUS events for each input one trigger event and one off allowing thus acting on any element of the installation from the device inputs BUSi n j This version of 2E2S is indicated for the control of lighting capacitive outputs
Download Pdf Manuals
Related Search