EVault Software Microsoft SharePoint Plug
Contents
1. 2008 Install the Agent and Plug in on the SQL Server machine You might need to leave the Instance name blank in order to use auto detect to connect to the SQL Instance 5 2 SharePoint Plug in and SQL Server Clustering For the SharePoint Plug in to run properly in an environment in which the SQL database used by SharePoint is on a Cluster you must perform a registry tweak Recommendations The registry tweak must be used in an SQL Cluster situation and the registry tweak must point to the virtual IP of the SQL Cluster If the Cluster Plug in and SharePoint Plug in are installed the Agent must run on all of the SQL Cluster physical nodes The registry tweak must also be set on all of the SQL Cluster physical nodes If the Cluster Plug in is not installed Windows Web CentralControl must point to a machine that is running an Agent with the SharePoint Plug in The machine with the Agent and the SharePoint Plug in must have the registry tweak applied In that scenario the SharePoint backup restore Agent does not need to run on the Cluster nodes In fact a machine can be dedicated to SharePoint backups and restores Since the SharePoint backups and restores will run on a separate machine from the SQL database there will be increased network traffic Depending on the network bandwidth the backups and restores may progress more slowly than expected Adding a String Parameter HKEY_LOCAL_MACHINE gt SOFTWARE gt EVault gt Agent If it2. See the Agent or CentralControl documentation for more information about configuring vaults Page 8 Microsoft SharePoint Plug in 7 2 User Guide Restoring Data 4 Restoring Data See the CentralControl documentation for more information about Restores There must be sufficient disk space available on the SharePoint server Otherwise the Restore Job will be forced to fail e Select the safeset to restore from Only a single safeset selection is allowed here You can browse into the safeset to view items that have been backed up e You can choose to restore to the original location or an alternate location e After selecting settings you can start the restore These steps apply to Windows CentralControl as well as Web CentralControl The screens that follow are from Web CentralControl With the Restore to another alternate location choice you can restore the file system to an alternate location as a file 4 1 Restoring to SharePoint You can restore back to the same SharePoint server original location or you can choose an alternate location in the file system of the same SharePoint server 1 Select the safeset from which to restore Only single safesets are allowed here You can browse into the safeset to view items that have been backed up Select items to add to the restore list Click Include The Include Options page appears Select Recursively to restore all subfolders Click Save Changes to return to the selec
3. an Agent that has the SharePoint Plug in Vault destination Vault Name Choose from the list of Vaults Network Address Backup Source type SharePoint Select SharePoint from the dropdown menu Authentication options Instance SharePoint defaults or custom names Windows or SQL server Password Hint User Bae credentials Password Encryption type Type If you select a type you must supply a password Password PEMD Logging options Create log file Y N Log detail level Keep or purge log files Number of logs to keep Schedule Immediate Schedule Can use the Scheduling Wizard Page 6 Microsoft SharePoint Plug in 7 2 User Guide Working with Backups 3 1 Backing Up Data It is assumed here that you have an Agent with a SharePoint Plug in already configured See the CentralControl documentation for more information The Agent and Plug in can be controlled from Web CentralControl or Windows CentralControl Here is an outline of the steps and options From CentralControl create a backup Job and select SharePoint as the backup source type Provide your SharePoint Instance Database Name and credentials Browse to select your data If you click Include you can provide a filter Select any other Advanced Backup Options such as encryption and retentions Optionally specify a backup schedule Select a destination Vault for the backup Start the backup imme
4. is not already there add a string parameter called SharePointHost Set its value to reflect the virtual IP address of the SQL Cluster REG_SZ yvirtual_ip_of_the_SQL_cluster Page 11 Microsoft SharePoint Plug in 7 2 User Guide Appendix 5 3 Windows SharePoint Service WSS Support The Agent works in conjunction with WSS 3 0 and the Microsoft SQL Native Client You can use SharePoint Central Administration to determine the SQL Instance Hidden SQL Instance The standard installation of WSS 3 0 installs Microsoft SQL Embedded Edition which creates a hidden SQL Instance of which the SharePoint Plug in is unaware Workaround Install the SQL Native Client and then set the Windows Registry entry string value SharePointHost to pipe MSSQLSmicrosoft ssee sql query Set SharePointHost in HKEY_LOCAL_MACHINE gt SOFTWARE gt EVault gt Agent When you create a backup or restore Job use SQL query as the database instance name That will force the SharePoint Plug in to connect to the SQL Server Embedded Edition using named pipes instead of TCP IP 5 4 SharePoint Plug in Best Practices When you need to delete a site do it from the site collections list in SharePoint Central Administration Sites deleted using any other method will not be restorable to the original location i e the SharePoint server Restores to file systems original locations are still possible In operations involving image files make sure
5. on Windows 2003 and 2008 servers e Provides brick level backups and restores of SharePoint items such as websites lists libraries and folders documents and system files e High level of granularity enables backups and restores of the entire site down to different individual document versions e Can restore a document as a document or a document version to the file system e Supports Listings RSS and External data sources e Supports SharePoint backups on SQL Clusters e Centralized control administration with Web CentralControl or Windows CentralControl 1 2 Limitations and Functionality The SharePoint Plug in is NOT a disaster recovery DR solution for SharePoint servers For complete DR protection of SharePoint servers the SQL Plug in is required The SharePoint Plug in is supported on Windows Agents It requires a separate SharePoint Plug in license The SharePoint Plug in does not support backups or restores of Alerts The SharePoint Plug in does not support backups or restores of User Profiles Audiences Workflows or restores to other SharePoint instances A file restore to original location greater than 250mb may fail This limitation may vary as it is in part dependent on your hardware s capability For large file restores it is recommended to restore as a separate restore job or to an alternate location i e to directory on disk Note Quick File Scanning QFS is ignored for SharePoint documents ShareP
6. sinc cou e a a aaa asa aa saaa osoan 9 4 1 Restoring to SharePoint onarcsnnonineniinninannnmie aaa 9 5 App ndii renane aa 11 5 1 SharePoint Web Farm SUppOrt cccccccccsscccsssssececseneeceeseneececeeaeeeseeeaeeeeseaueceeseaeeseeenaes 11 5 2 SharePoint Plug in and SQL Server CIUStCring c ccccccccsssssssscecececessesssteseeeeseessesseaeees 11 5 3 Windows SharePoint Service WSS SUPPOTT c scceesecesecesseeesseeesseeecseesssaeeseseeesees 12 5 4 SharePoint Plug in Best Practices ccccccccccecsssesscecececessesesneseeeeecessessaaeseeeeesessessaeees 12 5 5 Resolving SharePoint Connection ISSUES ccssecccessseeecsesseeecessneeeceeceeeeesseeeeseseeeeeees 13 5 6 SharePoint Disaster Recovery DR Requires SQL Plug in c ccccesecsseessteeseseeeeees 13 5 7 LOB MESSAB CS i oecsccesdizs cersstineneseensseasanencucoeegs cateatardecsesesaedvedeneeaeesesasevesavsensesbaseasedessesacegases 13 5 8 Troubleshooting SharePoint Portal Server 2003 SPS2003 cccsscesssreessseessseeeeees 14 5 8 1 Documents ANd VEPSiONS ccccceseesseceeseeececeeeuececseaaeceeeeaaecesseaaececeeaueceeseueeeeeeaaes 14 5 9 Troubleshooting Microsoft Office SharePoint Server 2007 MOSS2007 000 15 5 9 1 DOCUMENTS and VELSIONS svcsccsscacnccedecscceseesdotesscinesesaadhacadtannceesaadedevssesvecezsaceceadaacdes 15 5 10 Available Memory Problems ccccssceceeseneececsseeececseeeececseeeecssseeeecscseeaeceeeneae
7. that you include corresponding files i e same file names in _t and _w subfolders If you only restore the image these files generated by SharePoint will no longer be available Thumbnail links will not be available on the site or in Central Administration When you restore a site that has been deleted links in the navigation bar are not restored You need to recreate them manually Page 12 Microsoft SharePoint Plug in 7 2 User Guide Appendix 5 5 Resolving SharePoint Connection Issues Cannot connect to SharePoint error e For SharePoint Portal 2003 make sure that the Microsoft SQL Native Client is installed e Check credentials and permissions for Windows accounts e Enable remote login on the SQL server e Enable TCP IP protocols on the Microsoft SQL server to connect via IP addresses 5 6 SharePoint Disaster Recovery DR Requires SQL Plug in Backing up e Use the Agent to create a System State backup Job e Include the Program Files SharePoint folder e Include the Windows installation directory e Create an SQL Job to back up all of the SharePoint instances Restoring e Restore the System State using the IIS and SharePoint folders e Restore the SharePoint SQL Instance 5 7 Log Messages You might see an API has timed out message in the log file If you see Permission to perform this operation was denied or a similar message the API has probably timed out and the Plug in app
8. EVault Software Microsoft SharePoint Plug in 7 2 User Guide Revision This manual has been updated for Version 7 2 for Windows February 2013 Software Version 7 20 for Windows 2013 EVault Inc EVault A Seagate Company makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose Furthermore EVault reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of EVault to notify any person of such revision of changes All companies names and data used in examples herein are fictitious unless otherwise noted No part of this document may be reproduced transmitted transcribed stored in a retrieval System or translated into any language including computer language in any form or by any means electronic mechanic magnetic optical chemical or otherwise without prior written permission of EVault A Seagate Company c o Corporation Trust Center 1209 Orange Street Wilmington New Castle Delaware 19801 www evault com EVault EVault Software EVault SaaS and EVault DeltaPro are registered trademarks of EVault Inc All other products or company names mentioned in this document are trademarks or registered trademarks of their respective owners Acknowledgements Two encryption methods DES and TripleDES include cryptographic software written b
9. ce to be the new Federal Information Processing Standard FIPS The EVault Software Agents and EVault Software Director applications also have the added security feature of an over the wire encryption method Microsoft SharePoint Plug in 7 2 User Guide Contents Contents 1 Introduction to the SharePoint PlUg in cccccsssssccsssssceccssssceccssscsccssscsececssssesenssssseaneees 1 1 1 FO GUUIGS occ eisai aaa ea EEEE ENEO REAR NE AEREE EE EEEE EEEE EE a R aE ESEE EAEE SA 2 1 2 Limitations and FUNCtIONAlitY c cccccccessssssssceeeeecesseseaeseceeecesseuaeseeeeseeesesaaeeeeeesseesees 2 1 3 Release NOUCS is iia seta sccack ascetic teuacencs VeasesieavSascectcysactesuyleenscysecaeavvaldecdavarevestustdeaddyareseseiebee 3 1 4 ONNE S ice oo ors a e a a a 3 1 5 CentralControl esserne ENEE 3 2 Installing the SharePoint PIUg in scssssssccsssssscecsssscccssseceecssssccenssseceecssesceecsssseseaseseeoes 5 2 1 SYStEM REQUIFEMENTS cccisscdsecdedccccstsn iiaii ieseni ieoa iee ainaani eai aeoe 5 2 2 Installing the SharePoint Plug in ceccssecccesstececsesneeecsececeeseaeeecssaeeeeseaeeeesenaeeseseaaes 5 2 3 Uninstalling the SharePoint Plug in csccccssscecsssseeecseseeecseneeecsesaeeecseaaeeeseecaeeeeeeaaes 5 3 Working With Backup siicsescssccsesssscsassssssvessssssvasssssvasssssewansassevaesssssnensssssvaessssvaesssssnensssesnens 6 3 1 Backing Up Dat aeron aair ame iiede ects 7 A Restoring Data sssini eas set
10. diately or schedule it for later These steps apply to Windows CentralControl as well as Web CentralControl 1 In CentralControl create a backup Job and then select SharePoint as the backup source type Enter a Job name and description The SharePoint authentication options will appear Example Default Instance and Database Names e SharePoint Portal Server 2003 e Default Instance SHAREPOINTPORTAL e Config DB SPSO1 Config _db e Microsoft Office SharePoint Server 2007 e Default Instance OFFICESERVERS e Config DB SharePoint_Config_3bcxxxxxx XxXxXxX XXX XXX XXXXXXXXXXX You can also leave the Instance blank to auto detect use a default Microsoft SQL Instance To specify a custom instance name use this format TCP lt ip or name of host instance gt for example TCP HOST365 SQLINST1 The SharePoint Plug in credentials get verified when you browse to the SharePoint server next screen and when the backup Job actually runs Enter your credentials and then click Next If the SharePoint credentials are wrong you will get an error message Failed to connect to the SharePoint Server Note that you will not see the SharePoint selection in the Backup Source Type dropdown box unless you have the SharePoint Plug in installed and licensed Page 7 Microsoft SharePoint Plug in 7 2 User Guide Working with Backups 2 10 Choose your backup selections and then click Include to save them Yo
11. er 2003 with versioning enabled each time a document is modified a new version of a document containing previous data is created Remember that the document itself is not a document version If you have a document whose version is 5 0 as well as previous versions 1 0 2 0 3 0 and 4 0 and you modify the document the document version will become 6 0 and the document will contain new data Old data from the document will move to version 5 0 You will then have the following document versions 1 0 2 0 3 0 4 0 5 0 and the main document version 6 0 Restoring documents or versions over existing documents overwriting When you restore a document from a backup it overwrites the current document If you have a version 6 0 document in SharePoint and you restore it from a backup document whose version is 5 0 the contents of the version 6 0 document will be replaced with the contents of the backup version 5 0 document The current version of the document will become 5 0 and you will have following document versions 1 0 2 0 3 0 and 4 0 Workaround If you want to keep a document that already exists in SharePoint restore the document from backup to a file system and upload it to SharePoint manually This will create another version for the already existing document Page 14 Microsoft SharePoint Plug in 7 2 User Guide Appendix 5 9 Troubleshooting Microsoft Office SharePoint Server 2007 MOSS2007 5 9 1 Documents and Vers
12. eseeeeaeens 16 Microsoft SharePoint Plug in 7 2 User Guide Introduction to the SharePoint Plug in 1 Introduction to the SharePoint Plug in This version of the Microsoft SharePoint Plug in performs backups and restores of Microsoft SharePoint Portal 2003 WSS 3 0 and Microsoft Office SharePoint Server 2007 on Windows 2003 2008 servers The SharePoint Plug in is a document level backup and recovery solution The SharePoint Plug in enables brick level backups and restores of SharePoint items such as websites lists libraries folders and documents This high level of granularity enables backups and restores of entire sites down to different individual document versions You can also restore a document as a document or a document version to the file system Note This guide is not intended for use with SharePoint 2010 New restore interfaces related to SharePoint 2010 and SQL safeset shares are currently visible but they will not be supported until a future release The Microsoft SharePoint Plug in with the Agent installs directly on the server hardware Windows Server 2008 Backup Agent with Plug in document folder List Web SharePoint Server Page 1 Microsoft SharePoint Plug in 7 2 User Guide Introduction to the SharePoint Plug in 1 1 Features e Supports Microsoft SharePoint Portal Server 2003 Microsoft SharePoint Server 2007 and WSS 3 0
13. ilable in the online help Release notes provide up to the minute information about the released product They also contain an overview of new features known defect bug fixes incorporated since the last release a description of any known issues and a section about product support Release notes are available from your service provider 1 4 Online Help The CentralControl applications Windows CentralControl and Web CentralControl provide online help Web CentralControl help contains information similar to the contents of this manual You can access the help by the F1 key in one of the CentralControl applications 1 5 CentralControl CentralControl provides a centralized point of control for managing all computers running the Agent software on a large computer network Within an organization the configuration and scheduling of Jobs is done through the CentralControl software The CentralControl software connects to an organization s computers running the Agent software activating Backup Jobs on the computers The Windows CentralControl software operates on Windows XP Professional Server 2003 2008 and Vista systems The Web CentralControl software operates on Windows 2003 and 2008 systems The CentralControl Operations Guide is the main manual used by the customer user responsible for installing configuring and using all Agents and the CentralControl software plus applicable Plug ins The chapters in the manual cover
14. ion for file xxx This error may appear if there is not enough physical memory to back up a file in the system The amount of physical memory that ADO must allocate is 3 5 times as much as the file size For example to back up a 200 MB file you will need 700 MB of free physical memory Workarounds e Increase the amount of physical memory in the system e Shut down unneeded applications especially if they consume large amounts of physical memory e Exclude large files from SharePoint backups Page 16
15. ions Microsoft Office SharePoint Server 2007 supports both major and minor versioning Major versions are called published versions while minor versions are called drafts Each document in MOSS2007 can have e Published major versions e Draft minor versions e Important among those are e Current published major version e Current minor draft Additionally the document may be in a checked out state This can affect restores Document State If a document is checked out the document state is checked out document If the document has no major version published or has a draft whose version is higher than that of the major published version the document state is draft Otherwise the document state is document Restoring Documents or Versions Over Existing Documents Overwriting To maintain database integrity concerning document overwrites restores will be skipped if the state of a backed up document is different from the state of a document that currently exists in SharePoint Workarounds To retrieve a document in the state at which it was backed up remove the existing document from SharePoint To keep both existing information and information from the backed up state restore the needed versions to the file system and then copy them back to SharePoint Page 15 Microsoft SharePoint Plug in 7 2 User Guide Appendix 5 10 Available Memory Problems ADO Error Not enough storage is available to complete this operat
16. lication has tried to perform a function during a backup or restore The Plug in should reconnect automatically and you should see an informational message in the log Some system files will be backed up as 0 bytes in size When these files are restored to the file system they will still be O bytes in size This is expected behavior Page 13 Microsoft SharePoint Plug in 7 2 User Guide Appendix 5 8 Troubleshooting SharePoint Portal Server 2003 SPS2003 Plug in Authentication and Configuration Symptom Browser window in CentralControl view is empty when you use auto detection This can happen when multiple configuration databases exist on the system and the auto detection routine chooses the wrong one Workarounds From the SharePoint Central Administration website get the instance name and configuration database name that is being used currently by SharePoint Paste these values into the Credentials dialog of Windows CentralControl Note In the SharePoint central administration website the instance name displays in the format SERVERNAME INSTANCENAME whereas the SharePoint Plug in requires only the INSTANCENAME portion If the instance name appears as SERVERNAME only without the INSTANCENAME part leave the INSTANCENAME blank in the SharePoint Plug in or select the Use SharePoint default option Remove unused configuration databases from the database server 5 8 1 Documents and Versions In SharePoint Serv
17. oint backups using multiple separate SQL servers are not currently supported That is you cannot have SharePoint environments that use different SQL server instances to host the various SharePoint databases SharePoint Instance Size and Object Size There is no strict limitation on the SharePoint instance size or object size SharePoint controls object size However SharePoint backup performance is related to the amount of objects within the backup It is recommended that a job include no more than 10 000 objects If a folder contains a large amount of objects it is better to configure smaller jobs rather than one job that would include everything Page 2 Microsoft SharePoint Plug in 7 2 User Guide Introduction to the SharePoint Plug in 1 3 Release Notes This User Guide applies to both Windows CentralControl and Web CentralControl for managing the SharePoint Plug in The Agent and Plug in function in the same ways whether they are controlled from the Windows or Web based CentralControl The information that pertains to the Web CentralControl based functionality mostly concerns the different screens The screens in Windows CentralControl and Web CentralControl look different but they perform the same functions So doing a backup or restore with Windows CentralControl or Web CentralControl requires the same steps workflow but the screens are different in appearance The CentralControl information and descriptions are also ava
18. pported Windows Agents See the Windows Agent Release Notes for the latest versions of supported Windows Also the Shipping Products Chart lists all EVault Software supported products These documents are available from your system supplier or the www evault com website The SharePoint Plug in is used in conjunction with Vault versions 5 53 and 6 04 and later Microsoft SQL Server Native Client is required for the servers running SharePoint 2 2 Installing the SharePoint Plug in 1 Select the SharePoint Plug in when you run the Agent installation kit 2 Register with CentralControl 3 Click Next to begin the installation or Back to review or change your settings 2 3 Uninstalling the SharePoint Plug in Run the installation kit again but choose the Remove option You can remove the Plug in without uninstalling the Agent For more information see the installation sections of the Windows Agent User Guide Page 5 Microsoft SharePoint Plug in 7 2 User Guide Working with Backups 3 Working with Backups Before performing the SharePoint Backup Restore process be sure you have all the information such as names locations passwords etc that the wizard will require You can use the following table for design considerations as well as a record for future reference System Requirement Customer User supplied value Comments Database Name New Job name Name Name of Job to communicate with
19. the following topics e Installing the main CentralControl software GUI e Using the CentralControl GUI Workspace Agents Agent Configurations Jobs Safesets Catalogs and Log files Page 3 Microsoft SharePoint Plug in 7 2 User Guide Introduction to the SharePoint Plug in e Performing Backups Types Seeding Mapped drives and databases Options Tape Retentions Notification Expiration Scheduling and Ad hoc e Report Logs Creating and Managing Log files e Data Security User Authentication and Encryption e Troubleshooting and Command Line Interface The SharePoint Plug in is an integrated part of the Windows Agent installation kit You can install this Plug in when you first install the Agent or later by running the installation kit and selecting Modify Page 4 Microsoft SharePoint Plug in 7 2 User Guide Introduction to the SharePoint Plug in 2 Installing the SharePoint Plug in To install the SharePoint Plug in run the Windows Agent installation kit and choose to include the SharePoint Plug in For supported Director Vault Web CentralControl and Windows CentralControl versions see the Release Notes Note For information about functions such as Creating a new Agent Creating a backup Job Scheduling Backups and Disaster Recovery refer to the documentation for the Agent and CentralControl 2 1 System Requirements The SharePoint Plug in is supported on currently su
20. tion screen Click Next wv PF Ww M You can restore back to the same SharePoint server original location or to an alternate location within the file system of the same SharePoint server g To restore to a file system click Browse to specify its location 7 You also need to choose whether or not to overwrite existing files a Overwrite existing files This option is additive when you restore permissions for document libraries To stop permissions from accumulating delete the libraries before restoring This also applies to certain types of lists b Do not overwrite existing files Note that Do not overwrite existing files applies to the highest level selected e g folder or library For example if you select a library for restore and the library exists it will not be restored Even if a file inside is missing Do not overwrite applies Page 9 Microsoft SharePoint Plug in 7 2 User Guide Restoring Data 8 Through the Advanced Restore Options page you can specify a number of settings including logging and bandwidth options 9 Click Save Changes You can now run your Restore Job Page 10 Microsoft SharePoint Plug in 7 2 User Guide Appendix 5 Appendix 5 1 SharePoint Web Farm Support The SharePoint Plug in is supported on a SharePoint web farm for WSS 3 0 and Microsoft Office SharePoint Server 2007 The web farm must have access to Microsoft SQL Server 2005 or Microsoft SQL Server
21. u must already have a valid connection with proper credentials to the SharePoint server SharePoint Portal 2003 will display URLs while SharePoint Server 2007 will display folder names Look for the data that you want to back up select it and then click Include to add it to your Backup Set Click Exclude to exclude specific items from your Backup Set Note You can Remove elements from your Backup Set but you can only Edit a set that has a filter When you click Include the Include Options page will display Here you can check Recursively to back up all subfolders You can also filter your selection as indicated Click Save Changes to return to the selection screen When you have finished the selection process click Next You can optionally encrypt your backup data Encryption passwords are not stored anywhere on the system so you must remember yours The encryption types range from None to AES 256 bit the strongest Click Next to proceed to scheduling m or Click Advanced Backup Options The Advanced Options page allows you to choose settings such as retention and log file options These advanced options are described in the Agent and CentralControl documentation as well as the online help Optionally select a schedule or click Add to create a new one Click Next See the Agent or CentralControl documentation for more information about scheduling Select a destination vault for the backup Click Save Changes
22. y Eric Young The Windows versions of these algorithms also include software written by Tim Hudson Bruce Schneier designed Blowfish encryption Part of the software embedded in this product is gsOAP software Portions created by gSOAP are Copyright 2001 2006 Robert A van Engelen Genivia Inc All Rights Reserved THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE The EVault Software Agent EVault Software CentralControl and EVault Software Director applications have the encryption option of AES Advanced Encryption Standard Advanced Encryption Standard algorithm named Rijndael pronounced Rain Doll was developed by cryptographers Dr Joan Daemen and Dr Vincent Rijmen This algorithm was chosen by the National Institute of Standards and Technology NIST of the U S Department of Commer
Download Pdf Manuals
Related Search