Rako Controls Ltd. RAH Smart Multi room Handheld Controller: User
Contents
1. Then Enter key to go to that room SWITCH ON Start Up Splash screen Press lt to turn lights off Press to turn lights on Press Aor V keys to select individual channels within the room Channel 1 A All V Room Press All Key to quickly restore control to entire room RAH Smart Multi room Handheld Controller User guide Page 6 of 9 Rako Controls Ltd BASIC OPERATION FOR CURTAIN amp BLIND CONTROL Change Room Press Aor Y to change room Room 4 Then Enter key to go to that room SWITCH ON Room 4 lt Close Open gt All A Press lt to close blinds V Room Press to open blinds Press Enter to stop the blinds Splash screen Press Aor V keys to control individual channels within the room Press All Key to quickly restore control to entire room RAH Smart Multi room Handheld Controller User guide Page 7 of 9 Room 4 lt Close Open gt Channel 1 A All V Room Rako Controls Ltd Setup Room Setup See Next page for further detail of Room Setup Menus A Vv Quit Setup House 00i House 002 Kef The controller must be set to the same Choose House House Address as the rest of the Rako system Failure to do this will prevent A the controller from communicating with V Quit the lights s ne ars Setup Choose which room the controller is set ROm per Mode to when it is switched on either the efault Room lt f Default Room as defined in Room z Quit Quit Setu2. in Set Up mode General Operation Lighting Scene Mode This section should be read in conjunction with page 5 of this manual Basic Operation For Dimmable Lighting Control On power up the handset will display the Scene Select screen A2 with either the last room or default room displayed depending on configuration Use the right left keys to select the desired scene and press Enter or use the up down keys to have overall fade up down control To return to the Select Room screen A1 press Room To control individual channels from Screen A2 press Chan Channels in Screen A3 use the left right keys to scroll through the available channels and use the up down keys to fade that channel up down To exit press Quit RAH Smart Multi room Handheld Controller User guide Page 1 of 9 Display Shortcut Key it Menu Context keys tJ usscomevor Connector Rako Controls Ltd General Operation Lighting Switch Mode This section should be read in conjunction with page 6 of this manual Basic Operation for Switched Lighting Control If a Room is configured as one with Switched control only a menu of more appropriate screens will be displayed The navigation is the same as Scene Mode see above other than in Channel Control Screen B3 the up down keys scroll through the channels and left right keys execute the On Off functions General Operation Curtain and Blind Mode This section should be read in conjunct
3. modes and press Enter Delete It may be desirable to restore a room to the default settings if for example considerable editing had been done that needed to be undone To delete a room select the desired room in Screen D12 and use the up key to navigate to screen D18 Pressing Enter will prompt an Are You Sure message and then either select Yes or No A deleted room can always be re enabled but all information will be restored to default settings Start Mode The room selected on power up is user definable and can be set as either the default room or the last room selected before the unit powered down To define a default room see the Set Default section above From Screen D1 use the down key to navigate to Screen D3 and use the Enter key to toggle the power up mode between Last Room and Default Rm once selected press Quit Factory Reset It is possible to restore the handset to the factory settings ALL USER DEFINED INFORMATION WILL BE LOST From Screen D1 navigate use the down key to navigate to Screen D5 and press Enter A warning message Are You Sure will be displayed select either yes or no Group Setup see Grouped Room notes in General Operation From Screen D1 use the down key to navigate to Screen D6 and press Enter to reach Screen D61 Use the left right keys to choose a Group Number there can be multiple groups and press the down key to highlight Disabled and use the Enter key to toggle between Dis
4. to give more logical control or possibly an open plan Kitchen Dining Lounge area where each section has its own room address to give separate scene control In these instances the user might want to access both rooms quickly Once a room in a group is selected the shortcut key will scroll through all the rooms in the group if there are only two rooms this action will appear as a toggle Configuring the RAH Smart manually Before configuring the RAH Smart the Rako system to be controlled needs to be programmed once this is complete the RAH Smart can be set up to control the desired rooms with any required channel and scene information Entering setup mode From the power up screen A2 press Room to access the Change Room screen A1 Press the left right and shortcut keys simultaneously Set Up mode cannot be accessed from all screens _To exit setup mode press quit twice RAH Smart Multi room Handheld Controller User guide Page 2 of 9 Rako Controls Ltd The following notes should be read whilst referring to the Main Setup Menus pages of this manual The notes assume that the handset is in setup mode see above To assign House Address and Enable Rooms the user must know the numbers assigned to the receivers to be controlled This will be available either from the installer or by examining the Address Switch settings on a Rako wallplate and referring to the wallplate manual Setting the House Address To Enter the House address
5. Quit SaveEn YW Quit RAH Smart Multi room Handheld Controller User guide Page 9 of 9
6. Rako Controls Ltd RAH Smart MULTI ROOM HANDHELD CONTROLLER USER AND SETUP GUIDE The RAH Smart controller is a stylish handset with a colour display screen allowing use in multiple rooms selectable from the menu and offers Scene control of lighting and overall control of curtain blinds as well as individual circuit control for lighting and individual control of blinds or curtains within a room Rooms Scenes and Channels can be named for ease of use The controller is shipped with factory default settings It will need to be programmed to operate correctly with the installed system The RAH Smart can be configured manually following these instructions or more normally the handset will be configured by the system installer using the USB interface and programming software For information on how to program this way refer to the software Help file For clarity where this manual refers to blind control only all aspects are equally applicable to curtain control When the manual refers to channels this is normally the same as lighting circuits although it is possible to assign separate circuits to the same channel Power up To power up the RAH Smart press any key A Splash screen will be displayed followed by the startup menu screen The unit will automatically start up in either the last room that was used or in a user selected Default room The unit will turn itself off if inactive after 20 seconds to preserve battery life not when
7. abled Enabled Use the down key to highlight the room and use the right left keys to scroll through the active rooms until the first room to be grouped is reached and press Enter to add this room to the group Once added the display will show En enabled to indicate that this room is grouped Follow the same procedure to add other rooms to the group and press Save to store changes Note the shortcut key will only scroll between grouped rooms in normal mode when one of the grouped rooms has been selected RAH Smart Multi room Handheld Controller User guide Page 4 of 9 Rako Controls Ltd BASIC OPERATION FOR Dimmable LIGHTING CONTROL Use this menu to choose Change Room which room you want to control SWITCH ON Use A or V Choose the room that you want to Room 4 control Then press Enter key to go to that room Roo Enter Start Up Splash screen Room Select Screen Use lt or gt keys to choose e Room 4 different channels within the Use lt or gt keys then Enter to choose topom ee _ _ Siferent scenes Hold down Aor Y to Fade A Use Aor Y to Fade lights up and down chosen lights up and down out Grande Vrom Channel Control Screen Scene Control Screen To control individual lights To recall preset light levels RAH Smart Multi room Handheld Controller User guide Page 5 of 9 Rako Controls Ltd BASIC OPERATION FOR Switched LIGHTING CONTROL Change Room Press Aor V to change room Room 4
8. ave Channel Naming For ease of use it may be desirable to name channels Select the desired room in Screen D12 and use the up keys to navigate to Screen D14 press Enter and use the up down keys to select the desired channel and press Enter to access the name Use the up down and right left keys to edit the name once edited press Enter and then save Scene Naming For ease of use it may be desirable to name scenes Select the desired room in Screen D12 and use the up keys to navigate to Screen D15 press Enter and use the up down keys to select the desired scene and press Enter to access the name Use the up down and right left keys to edit the name once edited press Enter and then save RAH Smart Multi room Handheld Controller User guide Page 3 of 9 Rako Controls Ltd Set Default The default screen allows the selection of a default room Note setting a room as default does not automatically imply that this is the room selected on Power Up as that is definable in the Start Mode Screen D3 To set a room as the default room select the desired room in Screen D12 and use the up key to navigate to Screen D16 and press Enter and then save Room Mode A room can be defined as one with control for scene lighting default switched lighting control Switch or curtain and blind control C amp B To define a room mode select the desired room in Screen D12 and use the up key to navigate to Screen D17 Use the Enter key to switch between
9. ee cae on is now within the group Rako Controls Ltd ROOM SETUP MENUS Press Enter to set the current displayed room to be the Default Room in this case Room 004 Use Enter to Enable or Disable this Room Press Save button to store your selection Setup Room Setup A Vv Quit D18 D181 Are You Sure Room 004 Kope Room 4 A SaveEn W Quit Deleting a room will disable it and restores default values and names to that room User settings will be lost Press Enter to set current room for Lighting control switch control or for Curtains and Blinds control SaveEn W Quit Descriptive Scene Name eg Party Edit using AP Y lt and Enter V Quit Room 4 Room 004 Scene 1 Room 4 New A SaveEn W Quit Save Press A Y to select different scene then press Enter if you want to give it a new name Room 004 Channel 1 On lt rrfeesesssesseess Room 4 Channel 1 Keef A Save En Y Quit Sae Quit Use Aor V choose a different Channel then then press Enter if you want to give it a new name Room 004 Room 4 Room 4 A Channel 1 On Descriptive Channel Name eg Downlights Edit SaveEn W Quit Bhannel 1 using A gt Y lt and Enter Save Quit Enabled Use lt or gt to change mam eg lt p room number oom A SaveEn W Quit Enabled Enabled Room 004 Room 004 Room 4 Room 4 PE A Descriptive Room Name eg Lounge Edit using A gt Y lt and Enter A SaveEn W
10. ion with page 7 of this manual Basic Operation For Curtain amp Blind Control If a Room is configured for controlling blinds a menu of more appropriate screens will be displayed On switch on the handset will display either the last room or default room depending on configuration Screen C1 To open close all blinds in that room press the left right keys to stop the blinds at an intermediate point press the Enter key If the blinds are of the Venetian type the motor control module may have been set with momentary action In momentary mode the open close keys will allow short presses to change the louvre tilt and releasing the key after a short time will stop the change in tilt To fully open close the blind keep the appropriate key held until the control module latches default setting for this is 1 5 seconds and then release the blind will now travel to fully opened closed without any further input To access individual blind control press the up down keys to scroll between blinds or press Al to return to the Overall control screen To change rooms press the Room key to access Screen C2 and then use the up down keys to scroll between rooms use the Enter key to select Grouped Rooms It may be desirable to have rooms that have a logical association grouped with the shortcut key giving quick navigation between these rooms Examples might be a room that has both lighting and blinds addressed as separate rooms
11. p or the Last Room that was used before the remote was switched off Setup Firmware ae EEE E i i V 1 1 0 Firmware version Choosing this option will return the number controller to it s factory settings Only do this if you are prepared to reprogram the controller to operate with your Rako system Setup Factory Reset used for quick navigation between eg lighting and blind control as these should V Quit Yes No To put the RAH Smart into SETUP mode First go to the Change Room screen Hold down 4 gt and then press the shortcut key simultaneously Note Do not leave the RAH Smart in setup mode as in this mode it does not automatically switch itself off the batteries will be drained Press Quit Twice to exit setup mode E Group Commands Useful for quick selection Are You Sure 4 of different rooms using Shortcut key Can be normally be set to different room addresses Setup Group Setup Group 8 Group 0 Disabled Ae Disabled Enabled Enabled Room 4 A A A V Quit Save V Quit V Quit Save Group 0 Group 0 Enabled Enabled Save En Save En RAH Smart Multi room Handheld Controller User guide Page 8 of 9 Group 0 The sequence of menu key Enabled presses shown here will add Room 4 and Room 5 to a a Save En VY Quit group 0 Other groups can be added as required with whichever rooms are required Group 0 Enabled _ Room 5 En indicates that the room k n
12. use the down key to navigate to Screen D2 Choose House press Enter to display the current house Screen D21 and then scroll up or down to the desired house number and press Enter Note The following functions are the most commonly accessed functions of the handset Enabling Rooms A system can comprise of room numbers ranging from 1 255 Room 0 is House Master to avoid the problem of scrolling through many unused rooms in normal mode active Rooms need to be enabled From Screen D1 press Enter to access Screen D12 use the left and right keys to scroll to a room that needs to be enabled press up to disabled Screen D13 toggle between enabled disabled using the Enter key and press save to store any changes Enabling Channels Each room in a system can have up to 15 channels to avoid scrolling through many unused channels in normal mode active channels need to be enabled In Screen D12 select the desired Room and press the up key to navigate to Screen D14 and press Enter to access Screen D141 Use the right left keys to change a channel between On Off and press save after each change Use the up down keys to change channels Room Naming For ease of use it is desirable to name rooms To name a room select the desired room in Screen D12 and use the down key to move the cursor to the existing name default is New Screen D11 and press Enter Use the left right and up down keys to edit the name once edited press Enter and then s
Download Pdf Manuals
Related Search