CL-6 User Guide and Technical Information
Contents
1. SOUNDS DEVICES CL 6 Controller User Guide and Technical Information Sound Devices LLC E7556 State Road 23 and 33 Reedsburg WI USA 1 608 524 0625 fax 1 608 524 0655 Toll Free 800 505 0625 www sounddevices com support sounddevices com CL 6 User Guide and Technical Information The CL 6 Input Controller connects to the top or bottom of the 664 see Mounting the CL 6 and in cludes 6 full sized fader controls PFL control and highpass control and dedicated L and R routing buttons for Inputs 7 12 The large backlit Record and Stop buttons provide convenient access to trans port functions Other features include large daylight viewable LED meters with track arm indicators for tracks L R X1 and X2 This User Guide is a supplement to the 664 User Guide For full details please refer to the latest 664 User Guide available online at http www sounddevices com download guides 664_en pdf Mounting the CL 6 The CL 6 Input Controller can be mounted to the top or bottom of the 664 The following installation instructions are the same whether mounting on the top or bottom Begin by choosing which side the CL 6 will be mounted to and all directions will apply to that side of the 664 1 Power down the 664 2 Remove the disposable protective cover from the 664 s Header using a small flat tool A jew eler s screwdriver works well The protective cover is attached with adhesive 3 Similarly remove t2. Lim 99 00 31 06 0 00 00 0 AEB Sc Trim Levels To adjust the trim level of Inputs 7 12 slide the Input s Input Select Switch right to access the Input Settings Screen From the Input Settings Screen turn the Select Encoder to adjust trim for the Input The trim gain will be displayed SOUND DEVICES CL 6 User Guide and Technical Information Direct Outputs 1 6 By default when the CL 6 is connected the TA3 connections for Inputs 7 12 will function as balanced line level inputs It is possible to switch each connection independently back to a direct output for its respective 1 6 Input Slide the desired input 7 12 Input Select Switch right to access the Input Settings Screen Press the Headphone Encoder and turn it to select the DIR OUT option Bus Tracks L R X1 and X2 To make arming and level adjustments to the bus tracks press the Meters repeatedly from Main Screen until a Meter View is shown that displays the bus tracks see Meter Views in 664 User Guide CF 5b 3h SOLAN m 4 5 20 Lim 00 00 00 02 j 000 i 0 0 9 39AM 10 05 12 Turn the Select Encoder to highlight the desired Bus Track With the desired track highlighted press the Select Encoder and turn to adjust that track s level To arm a track turn the Select Encoder to high light the track press and hold the Meters Button then push the Select Encoder a Features and specifications are subject to change Visit www sounddevices com
3. for the latest documentation CL 6 User Guide and Technical Information Quick L and R Track routing To quickly route an input to the L or R Bus track hold down the Input s Highpass Filter Button then slide the Input Select Switch left for Track L or right for Track R The Track L or Track R Indicator LED will illuminate to indicate that the Input is routed to the respective track Highpass Filter To engage the Highpass Filter push the Highpass Filter Button for the desired Input The Highpass Filter LED will illuminate to indicate the filter is activated Push the Highpass Filter button again to disable the Highpass Filter SOUNDSDEVICES CL 6 User Guide and Technical Information Specifications Powering Powered by the 664 Dimensions 1 75 x 10 2 x 2 25 H x W x D Weight 21 5 OZ SOUNDSDEVICES nr er _ According to EN ISO IEC 17050 1 2004 Manufacturer s Name Sound Devices LLC Manufacturer s Address E7556 State Rd 23 and 33 Reedsburg WI 53959 USA Declares under sole responsibility that the product as delivered Product Name CL 6 Input Controller Model Number CL 6 Product Options This declaration covers all options of the above products complies with the essential requirements of the following applicable European Directives and carries the CE marking accordingly EMC Directive 2004 108 EC EN 55022 2006 A1 2007 EN 55103 2 2009 First date of CE approval October 17 2012 This
4. DEVICES LLC S OPERATING AND INSTALLATION INSTRUCTIONS TO THE FULLEST EXTENT PERMITTED BY LAW SOUND DEVICES SHALL HAVE NO LIABILITY TO THE END USER OR ANY OTHER PERSON FOR COSTS EXPENSES DIRECT DAMAGES INCIDENTAL DAMAGES PUNITIVE DAMAGES SPECIAL DAMAGES CONSEQUENTIAL DAMAGES OR OTHER DAMAGES OF ANY KIND OR NATURE WHATSOEVER ARISING OUT OF OR RELATING TO THE PRODUCTS THESE TERMS AND CONDITIONS OR THE PARTIES RELATIONSHIP INCLUDING WITHOUT LIMITATION DAMAGES RESULTING FROM OR RELATED TO THE DELETION OR OTHER LOSS OF AUDIO OR VIDEO RECORDINGS OR DATA REDUCED OR DIMINISHED AUDIO OR VIDEO QUALITY OR OTHER SIMILAR AUDIO OR VIDEO DEFECTS ARISING FROM RELATED TO OR OTHERWISE ATTRIBUTABLE TO THE PRODUCTS OR THE END USER S USE OR OPERATION THEREOF REGARDLESS OF WHETHER SUCH DAMAGES ARE CLAIMED UNDER CONTRACT TORT OR ANY OTHER THEORY CONSEQUENTIAL DAMAGES s FOR WHICH SOUND DEVICES SHALL NOT BE LIABLE SHALL INCLUDE WITH OUT LIMITATION LOST PROFITS PENALTIES DELAY DAMAGES LIQUIDATED DAMAGES AND OTHER DAMAGES AND LIABILI TIES WHICH END USER SHALL BE OBLIGATED TO PAY OR WHICH END USER OR ANY OTHER PARTY MAY INCUR RELATED TO OR ARISING OUT OF ITS CONTRACTS WITH ITS CUSTOMERS OR OTHER THIRD PARTIES NOTWITHSTANDING AND WITHOUT LIMITING THE FOREGOING IN NO EVENT SHALL SOUND DEVICES BE LIABLE FOR ANY AMOUNT OF DAMAGES IN EXCESS OF AMOUNTS PAID BY THE END USER FOR THE PRODUCTS AS TO WHICH ANY LIABILITY HAS BEEN DETERMINED TO EXIST SOUND DEVICES A
5. Declaration of Conformity applies to the above listed products placed on the EU market after October 17 2012 Yu 5 haham Date Matt Anderson Director of Engineering 6 Features and specifications are subject to change Visit www sounddevices com for the latest documentation CL 6 User Guide and Technical Information Warranty and Technical Support Warranty amp Service Sound Devices LLC warrants the CL 6 against defects in materials and workmanship for a period of TWO 2 year from date of original retail purchase This is a non transferable warranty that extends only to the original purchaser Sound Devices LLC will repair or replace the product at its discretion at no charge Warranty claims due to severe service conditions will be addressed on an individual basis THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE SOUND DEVICES LLC DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SOUND DEVICES LLC IS NOT RESPONSIBLE FOR SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF WARRANTY OR UNDER ANY OTHER LEGAL THEORY Because some jurisdictions do not permit the exclusion or limitations set forth above they may not apply in all cases For all service including warranty repair please contact Sound Devices for an RMA return mer chandise authorization before sending your unit in for repair Product returned without an RMA number ma
6. ND END USER EXPRESSLY AGREE THAT THE PRICE FOR THE PRODUCTS WAS DETERMINED IN CONSID ERATION OF THE LIMITATION ON LIABILITY AND DAMAGES SET FORTH HEREIN AND SUCH LIMITATION HAS BEEN SPECIFI CALLY BARGAINED FOR AND CONSTITUTES AN AGREED ALLOCATION OF RISK WHICH SHALL SURVIVE THE DETERMINATION OF ANY COURT OF COMPETENT JURISDICTION THAT ANY REMEDY HEREIN FAILS OF ITS ESSENTIAL PURPOSE EX Features and specifications are subject to change Visit www sounddevices com for the latest documentation SOUND DEVICES
7. SDEVICES CL 6 User Guide and Technical Information Left Screw Multi pin Header Covered Right Screw 2 106 A a O REC z R000000000000000000000 O x1000000000000000000000 A 2000000000000000000000 C 30 20 18 16 14 12 10 8 6 4 2 0 2 4 6 8 121620 LM 1 Input Fader 5 Input LED Primary control for adjusting the level of an Indicates input signal activity Illuminates in input during operation Ranges from off to 15 various colors and intensities to show signal dB Nominal setting is in the middle 0 dB level and activity Green signal presence pre fader yellow limiter activity pre and post fade red signal overload clipping pre and post fade flashing yellow input PFL 6 Track R Indicator Iluminates Blue when the Input has been routed to Track R 2 Highpass Filter Button Push to toggle activation of Highpass Filter on the Input 3 Highpass Filter LED Iluminates blue to indicate Highpass filter is engaged on the Input 4 Track L Indicator Iluminates Blue when the Input has been routed to Track L EN Features and specifications are subject to change Visit www sounddevices com for the latest documentation CL 6 User Guide and Technical Information 7 PFL Input Select Switch 9 LED Bus Track Meters Slide left Pre Fade Listen Sends the input s Displays levels for L R X1 and X2 Tracks pre fade signal to HP monitor mono mix The When
8. he disposable protective cover from the CL 6 Header on the side that will connect to the 664 4 Using a Philip s head screwdriver remove one of the rear screws from the CL 6 see dia gram Either screw can be removed Remove only one rear screw This screw will not be used with the CL 6 664 assembly 5 Using a Philip s head screwdriver remove the rear screw on the 664 that corresponds with the screw removed in step 3 The CL 6 can be mounted upside down Ensure that the screw removed in this step corresponds to the desired orientation This screw will not be used with the CL 6 664 assembly 6 Using a Philip s head screwdriver remove the left and right screws from the 664 see dia gram These screws will not be used with the CL 6 664 assembly 7 Connect the ribbon cable supplied to the Header on the 664 Carefully slide the rubber gas ket into place where the ribbon cable connects to the 664 8 With the 664 sitting on a flat stable surface hold the CL 6 in hand and connect the other end of the ribbon cable to the header on the CL 6 9 Insert the excess ribbon cable into the cavity behind the header on the CL 6 while lower ing the CL 6 into position Ensuring that the ribbon cable is fully within the cavity and not pinched between the CL 6 and 664 and that the rubber gasket is positioned properly 10 Using a philip s head screwdriver drive the 3 longer screws supplied through the CL 6 and into the 664 SOUND
9. the CL 6 is attached these Track meters 664 supports simultaneous PFL of multiple are removed from the LCD which instead dis inputs Does not affect Master Output signal plays Inputs 1 12 Slide the switch left to activate and again to deactivate For momentary action hold the switch left for one second or longer The Input LED flashes yellow when an input s PFL is ac tive Slide right Input Settings Enters the Input Settings Screen where basic input setup and input to output bus routing is performed See 11 Stop Button 10 Record Button Alternate backlit Record Button The Transport Control on the 664 operates normally when the CL 6 is attached This button provides an ad ditional control point for Record Input Setup and Control Alternate backlit Stop Button The Transport 8 Bus Track Arm LED s Control on the 664 operates normally when the me CL 6 is attached This button provides an ad Iluminate red to indicate the Track is armed for a ditional control point for Stop recording Operation When the CL 6 is connected the TA3 connections for Direct Inputs 1 6 on the 664 become available for balanced line level input These Inputs are numbered 7 12 respectively Routing ISO Track arming and Fader control all function the same as Inputs 1 6 see Input Setup and Control Bus Track meters L R X1 and X2 are removed from the Main Screen to make room for the meters of Inputs 7 12 CF SE 3h25 Wa E 40 0 3 20
10. y experience delays in repair When sending a unit for repair please do not include acces sories including SD cards batteries power supplies carry cases cables or adapters unless instructed by Sound Devices Sound Devices LLC Service Repair RMA XXXXX E7556 State Rd 23 and 33 Reedsburg WI 53959 USA telephone 608 524 0625 Technical Support Bug Reports For technical support and bug reporting on all Sound Devices products contact Sound Devices LLC E mail support sounddevices com web www sounddevices com contact_support htm Telephone 1 608 524 0625 Toll Free in the U S A 800 505 0625 Fax 1 608 524 0655 Sound Devices cannot guarantee that a given computer software or operating system configuration can be used satisfactorily with CL 6 generated files based exclusively on the fact that it meets our minimum system requirements Please check with your software editing application to make certain that it is compatible with the file type selected SOUNDSDEVICES CL 6 User Guide and Technical Information Limitation of Liability LIMITATION ON SOUND DEVICES LIABILITY SOUND DEVICES LLC SHALL NOT BE LIABLE TO THE PURCHASER OF THIS PRODUCT OR THIRD PARTIES FOR DAMAGES LOSSES COSTS OR EXPENSES INCURRED BY PURCHASER OR THIRD PAR TIES AS A RESULT OF ACCIDENT MISUSE OR ABUSE OF THIS PRODUCT OR UNAUTHORIZED MODIFICATIONS REPAIRS OR ALTERATIONS TO THIS PRODUCT OR FAILURE TO STRICTLY COMPLY WITH SOUND
Download Pdf Manuals
Related Search