INSTALLATION MANUAL
Contents
1. R U 509 Relay Unit INSTALLATION MANUAL Applied Machine C7000 C7000P C6000 C70hc COLOR PRESS 71ppm 71ppm 70ppm 70ppm 60ppm 60ppm Product Code A1DU A204 A1DV A205 l Precaution Select a flat and stable place for installing the machine Lifting the machine in an awkward position or transporting it in a poorly balanced position could result in personal injury When transporting the machine assign an adequate number of persons to the job and ensure that each person can take a good position of not being excessively loaded mass approx 60 kg ll Accessory parts A1TTIXCO02CA A2A2 1XC001CA 2 A1TTIXCO04CA Installation plate 1 Installation Installation ty plate 3 4 Clamp cH A1TTIXC005CA 2 Installation 9 Power cord Except for Europe Il Installation Procedure 1 Remove the mirror mat and the locking tapes from the external parts 2 Check the external appearance of the machine Locking tapes aun a i D Locking tapes A2A2IXC002CA 3 Open the front door and remove the locking tapes and the bundled item Locking tapes ak ir at se Bundled P item A2A2 XC003CA 4 Remove the connector cover on the left side of the main body 1 screw Connector cover A2A2IXC004CA A2A2955000 5 Install the installation plates 1 and 2 to the main 7 Adjust the height of the RU 509 body each 2 places TP screw M4x6 each 22. lug the power cord of the main body and the RU 509 into the outlet and turn ON the Main power switch Touch the System Setting key Touch the Serial Number Setting key 5 Touch the Finisher key to enter the serial number setting screen Select the installa Refer to procedures in the Service Manual to enter into the Service Mode tion order key Enter the serial number of the RU 509 and touch the OK key Use the Shift key to switch between upper case letters and lower case letters Touch the Return key and then touch the Exit key
3. pcs 1 Align the height of the main body and RU 509 as shown in the picture TP screws M4x6 94 TP screws M4x6 I Installation plates 2 Installation plates 1 a 6 Connect 4 connectors of the RU 509 to the con nectors of the main body Note Before setting the RU connector wiring harness to the main body be sure to push it into the RU side Otherwise it is nipped A2A2IXC005CA Note e urn 4 height adjustment screws back and front shown in the picture to adjust the height e Turning the screw clockwise rises the RU main body N Height adjustment screws Connectors A2A2IXC006CA Height adjustment screws A1TTIXC014CA E 2 8 Align the top and bottom holes of the RU 509 to the installation plates 1 pins and lock them by Sliding the RU 509 to the back ran vooy Installation plate 1 Installation plate 1 9 Fix the RU 509 and the installation plates 3 with the screws TP screw M4x8 2 e Installation plate 3 Da Installation plate 3 Le 4 S D D D a D EN TP screw M4x8 A lt a A2A2IXC008CA 10 Plug in the RU 509 power cord and fix it in the clamp Sems II screw M4x8 1 Power cord A1TTIXC017CA IV Serial Number Registration Register the serial number of the RU 509 installed to the main body The location of the serial number is shown in the fig ure below Ly eG eZ UREN _ P
Download Pdf Manuals
Related Search