Addendum to operating instructions MOVITRAC 07
Contents
1. 07 X11 04965AXX Fig 2 Connection to MOVITRAC 07 2 2 Data from parameter module to the inverter Use the DOWNLOAD key to copy all unit data from the parameter module to the inverter All data have to be present in the parameter module for this step LED green The inverter must be inhibited to transmit the data e g by pressing the Stop key Use the Download key for the next step The green light will be flashing in the LED during the copying process and become steady once the copying process has been finished data present The error message F 97 copy error will appear on the inverter display in case of a copy error The error can be reset by copying a complete data set from the parameter module into the inverter or by performing a factory setting After the loading process the inverter can be started by pressing the RUN key or turning the power supply on off The data will not be transmitted in case e the inverter is enabled e the P803 parameter lock has been set to ON SEW EURODRIVE GmbH amp Co P O Box 3023 D 76642 Bruchsal Tel 49 7251 75 0 Fax 49 7251 75 1970 Telex 7 822 391 MOVITRAC 07 Frequency Inverter Addendum to Operating Instructions Option Parameter Module Edition 07 2001 10522719 en 2 3 Data from the inverter to the parameter module You can copy all unit data from the inverter to the parameter module with the UPLOAD key The green light will be flashing in the LED du2. MOVITRAC 07 Frequency Inverter Addendum to Operating Instructions Opti on Parameter Module Edition 07 2001 10522719 en 1 Features e Saving of data from the inverter in the parameter module e Playback of data from the parameter module into the inverter e Display of operating state e Supported unit types MOVITRAC 07 LOGODrive as of firmware 10 MOVITRAC 07 standard version as of firmware 13 1 1 Frontal view _ 1 2 3 4 04944AXX Fig 1 Parameter module Element Description 1 Connection cable with plug 2 Three color LED Western plug for connection to inverter green data present in parameter module green flashing transmission in progress yellow no data in parameter module red transmission error red flashing transmission impossible parameter lock enable 3 DOWNLOAD key Data are transmitted from the parameter module to the inverter 4 UPLOAD key Data are transmitted from the inverter to the parameter module SEW EURODRIVE GmbH amp Co P O Box 3023 D 76642 Bruchsal Tel 49 7251 75 0 Fax 49 7251 75 1970 Telex 7 822 391 MOVITRAC 07 Frequency Inverter Addendum to Operating Instructions Option Parameter Module Edition 07 2001 10522719 en 2 Operation 2 1 Connection The parameter module is equipped with a short piece of cable and a Western plug This plug is connected to X11 RS 485 for MOVITRAC
3. ring the copying process There will be a red light in the LED for two 2 seconds in case of an error in the copying process There will be a steady green light in the LED after a successful copying process data present A steady yellow light in the LED indicates an error in the copying process no data pre sent 2 4 Storing the device For storage purposes simply plug the cable into the appropriate receptacle on the back of the parameter module 04967AXX Fig 3 Rear side of unit with stored cable You can then slide the parameter module from the top onto the cover of the MOVITRAC 07 unit Simply reverse the process to remove the parameter module Fig 4 Mounted parameter module SEW EURODRIVE GmbH amp Co P O Box 3023 D 76642 Bruchsal Tel 49 7251 75 0 Fax 49 7251 75 1970 Telex 7 822 391
Download Pdf Manuals
Related Search