INSTALLATION MANUAL
Contents
1. of how to display the Service Mode screen see the service manual 3 Display the Billing Setting screen To display the Billing Setting screen press Stop 9 on the Control Panel 4 Touch Management Function Choice Billing Setting Counter Setting AOQMIXE012DA 5 Touch Authentication Device2 6 Touch Card Billing Setting Management Function Choice Settings vender Bng Vendor 1 Ll Response Tineout Key Counter f Ea mre Vendor 2 Key Counter AOSNIXE011DB 7 Touch END 8 Touch Exit on the Service Mode screen 9 Turn OFF and ON the Main Power Switch Note When displayed the Service Mode screen be sure to turn off the main power after exiting the Service Mode screen and wait for 10 seconds or more before turning on2. the cap from the working table one place Fix the authentication unit on the working table using velcro fastenings A and B furnished with the unit A three places on the back of the authentication unit B three places on the working table AO9NIXC004DB AO9MIXCO03DA 5 Attach the cord clamp onto the position shown in the illustration Note The cord clamp is furnished with the working table WT 502 AO9MIXCO08DA Run the authentication unit cable through the hole in the working table Route the cable as shown in the illustration so that the wire saddles three places and the cable clip one place hold the cable securely AOQNIXCOO6DA lt When installing to C650 C550 C451 gt 8 Remove the right rear cover TO AOOJIXCO71DA 9 Connect the cable from the authentication unit to the machine Ze Ze Q 7 avery AOQNIXC007DA 10 Reinstall the right rear cover that has been removed in step 8 lt When installing to C353 C253 C203 gt 8 Connect the cable from the authentication unit to the machine A09NIXC012DA Ill Setting IC cord authentication 1 Plug the power cord into the power outlet and turn on the machine 2 Display the Service Mode screen For details
3. AU 201 Authentication Unit IC Card Type INSTALLATION MANUAL Applied Machines C650 C550 C451 C353 C253 C203 COLOR MFP Color B amp W 50 ppm 65 ppm 45 ppm 55 ppm 45 ppm 45 ppm 35 ppm 35 ppm 25 ppm 25 ppm 20 ppm 20 ppm Product Code AOOH A00J A00K A02E I Accessory parts No Name WARNING 1 Authentication a After unpacking be sure to get rid of the unit packaging materials and keep them out of the reach of children Putting the head in the plastic bag involves danger of suffocation Ferrite core Note e The working table and the local interface kit need to be mounted before to install this unit e Take the same procedures though the machine AO9NIXCO08DA illustrations or adjustment screens are different Velcro fastening A from the ones in the procedures hook 25 4 x 10 mm Velcro fastening B loop 25 4 x 10 mm is 4040IXC111DA Safety information guide Quick guide Installation manual A S a y 4980IXC019DA E 4 AO9N 9550 01 Il Installation procedures 1 Turn off the machine and unplug the power cord from the power outlet 2 Attach the ferrite core as shown in the illustration Note e Install the ferrite core by winding the cable two turns e Place the ferrite core approximately 60 mm away from the authentication unit AOQNIXCOO9DA AOSNIXCO10DA 3 Remove
Download Pdf Manuals
Related Search