Season Wireless User Manual
Contents
1. Season Wireless User Manual www duolabs com All rights reserved i u r ee JTT ee YA PVA d i olab SCOM Season Wireless User Manual English April 2005 Season Wireless User Manual www duolabs com All rights reserved Premise Season Wireless is a smartcard traffic analyzer and a useful Support tool for developers of smartcard emulators This device is the natural evolution of Season Logger 2 which can be connected to PCs by means of an RS 232 serial cable This new product is wireless and enables therefore the analysis testing device to be installed in a different location as compared to the PC where the testing emulation software runs thus eliminating the need of connection cables The device consists of two distinct components the Slave and Master The Slave is the card that is inserted in the remote device and that physically replaces the smartcard while the Master is the card connected to the PC through the USB port and the RS 232 connection which acts as radio link between the PC and Slave Both components have a removable wireless antenna with a frequency of 2 4 GHz Season Wireless User Manual www duolabs com All rights reserved Connections The Slave needs to be connected to an external 9 V power supply Therefore the card has a standard power connector and a small connector for the connection of the 9 V battery The Slave also has a connector for the insertion of the smart2. card which is used to log the traffic between the smartcard and the remote device The Master is powered by the USB port that connects it to the PC This port is also used to transmit configuration commands while the smartcard emulation data is transmitted through the RS 232 serial port This ensures maximum compatibility with the software applications used with Season Logger 2 The Slave and Master can be connected to one another through their 20 pin male female connectors if it is necessary to upgrade the internal firmware Both units have a connector for the wireless antenna It is important to make Sure that the antennas are correctly positioned on each of these units and that their orientation complies with the instructions given on next 2 images Both units also have red and yellow LEDs that light when the units are being powered and when the firmware is upgraded The Master also has an additional green LED that lights when data is being transmitted to from the PC through the RS 232 serial port z DiS Eren 4 eR A i i Ei ih be T ri a a RIRAN pali Er me e e m Season Wireless User Manual www duolabs com All rights reserved Software Season Wireless is supplied with a software for PCs that can be used to setup and upgrade the Slave and Master This software requires the use of Windows operating systems Company Duolabs s r l Copyright 2003 2005 The device can operate cor
3. d affect the radio communications Coverage Check Move your Season SLAVE unit Press Stop to halt Stop To change the initial settings of the device and or update the internal firmware press UPGRADE Firmware in the software pane 7 Season Wireless Master Season Wireless Setting Functions Device Version Communication Settings Before ATR After ATR Baudrate Baudrate Parity Parity EYEN EYEN ATR SBH FHF HF HHH HHH HHH HHH HHH HHH Firmware ON AIR UPGRADE Firmware Load Firmware file C UNICO_65 swr S m Program Devices Hide Exit MASTER S N 45007L7HH863H851 A Connection OK SEASON Settings can be changed and firmware can be upgraded with one operation only Therefore to be able to carry out one of these two operations it is sufficient to use a file with the last version of the firmware of Season Wireless usually with an SWR extension To load the file click the button that represents the open yellow folder After loading the file you can view the initial settings of Season Wireless by 8 Season Wireless User Manual www duolabs com All rights reserved clicking WIRELESS Setting Functions and Communication Setting The settings can be read edited and saved in the same file so that they are available in future by simply clicking the icon that represents a floppy disk Click Device Version to display the firmware versi
4. e The settings are displayed only if both components are powered and if the two antennas are correctly inserted in their respective slots At this point you can display the settings by clicking the following buttons e WIRELESS Setting to select the transmission channel Season Wireless Master Season Wireless Setting Communication Setting Channel za UPGRADE Firmware Firmware ON Line Configuration ATR Setting Mode Option Mode Read Configuration Read ATR ae enable cno Signal Function Disable ECHO Check Connection Coverage Check steak uo MASTER S N 45007L7HH863H851 V wireless Status OK Connection ok SEASON e Functions to select the Season or Logger mode 5 Season Wireless User Manual www duolabs com All rights reserved 3 Season Wireless Master Season Wireless Setting Communication Setting Device Version Modality Modality SEASON MODE UPGRADE Firmware Firmware ON Line Configuration Setting Mode Option Mode end cont Read Read Configuration eco Read ATR LOGGER Enable ECHO Signal Function 6 SEASON Disable ECHO Check Connection Coverage Check Hide Exit master S M 45007L7HH863H851 a Wireless Status OK K Connection OK SEASON e Communication Setting to select the settings for serial communications sent to the remote device Season Wireless Ma
5. eless communication between the Master and Slave was successful if buffer overflow problems have occurred and the operating mode of the Slave Season or Logger 10 Season Wireless User Manual www duolabs com All rights reserved F A Q Q Is Season Wireless compatible with all the software applications used with the traditional version of Season Logger 2 A It is compatible with the vast majority of software applications that are currently used with Season Logger 2 Q What can do if the smartcard emulation software am using is not compatible A Send a notice to support duolabs com detailing the software used and the type of problem that has occurred Our technicians will examine your problem and make the necessary changes Q Do I need to upgrade the firmware of the device A You may have to upgrade the firmware of the device if you wish to use it with a larger number of software applications Upgrades can be done easily and quickly with a single operation by simply following the instructions provided in this manual or in subsequent technical notes Q Can you use several Masters or Slaves A You can only use one Slave for each Master Alternatively you can use several pairs of Masters and Salves kit along with different wireless channels Q Do have to use the battery of the Slave How long does it last A The additional power supply battery or power supply is required The autonomy of the battery var
6. er supply 9V with external power supply central positive and external negative poles or alkaline battery Master power supply through USB port Energy consumption of Slave 70mAh Life of Slave batteries 10 hours Reset signal from smartcard reader easily identifiable by PC User specified ATR User specified serial settings baud rate and parity Automatic correction of wireless transmission errors Automatic buffer overflow notification Upgradable firmware Season Logger modes selectable via radio Setting commands transmittable via software or RS 232 serial connection 13 Season Wireless User Manual www duolabs com All rights reserved General information Duolabs Srl declines all responsibility for damages originating from the failure or the improper use of Season Wireless Duolabs Srl shall accept returned products only if these have been used in compliance with the instructions provided in this manual or on Web site www duolabs com Products that fail to run with third party software applications or that cannot be used due to the lack of radio coverage shall not be refunded Software should be downloaded only from Web site www duolabs com that is the official Web site of the manufacturer The manufacturer does not supply bin or equivalent files For more detailed information or upgrades visit our Forum at www duolabs com The manufacturer reminds all users that the use of unlicensed software infringes cop
7. ies according to the initial charge of the battery New 9V alkaline batteries can be approximately used for 10 hours Q What type of power supply must use if don t have a 9V alkaline battery A It is advisable to use a stabilized 9V power supply with the following polarity central positive and external negative poles You may also use a non stabilized power supply provided that you do not exceed a maximum voltage of 9V Q What range can Season Wireless cover A It is very difficult to determine the maximum distance that can be covered because this is influenced by the objects located between the Slave and Master and by the presence of other equipment that generate radio waves at a frequency of 2 4 GHZ Q Does Season Wireless interfere with other wireless equipment A Season Wireless has a low emission power equal to O db Therefore it can be used without the authorization of regulatory bodies However it is not 11 Season Wireless User Manual www duolabs com All rights reserved possible to exclude possible interferences with other equipment that uses the Same frequencies 12 Season Wireless User Manual www duolabs com All rights reserved Technical specifications Range up to 200 meters this range cannot be guaranteed as it varies according to the location see F A Q Wireless communication speed 64 Kbit sec Reception Transmission buffer 50 byte Number of channels 78 Slave pow
8. on for the Slave and Master contained in the loaded file To apply the changes and or upgrade the device firmware using the parameters in the loaded file disconnect the Slave from the power supply disconnect the USB and RS 232 cables from the Master remove the antennas from the two components connect the Slave and Master to one another using the 20 pin connectors and reconnect the USB cable to the Master aa i i iif a a hes E a To start the upgrade click Program Devices then select Proceed in the confirmation dialog Programming Device ATTENTION Before proceeding make sure both antennas are removed from MASTER and SLAVE units Previous Praceed Season Wireless User Manual www duolabs com All rights reserved A progress bar displays while the upgrade process in progress Please Wait Programming SLAYE device Please wait And the yellow LED flashes on both components first on the Slave then on the Master Please Wait Programming MASTER device Please wait The lower section of the software pane displays two buttons Hide and Exit which can be used to hide the software dialog and close the application To resume the display of the dialog it is sufficient to click the icon on the bar next to Windows clock The software also displays a status bar that provides a summary of the status of the device indicates whether the Master is connected to the PC if the wir
9. rectly only if the Slave is powered at 9 V the Master is connected to the PC through the USB and RS 232 serial ports the updated drivers for the Master have been installed on the PC and if the software is running on the PC The two units are configured with the following default settings that can be changed through the software e Operating mode Season smartcard emulation or Logger traffic analysis e Wireless transmission channel to allow the simultaneous use of several Slave Master units e ATR to be sent to the remote device e Settings for serial communications baud rate and parity before and after the transmission of the ATR to the remote device To change the initial settings of the device press Firmware on AIR in the software panel Season Wireless User Manual www duolabs com All rights reserved Season Wireless Master Season Wireless Setting Communication Functions Device Version Setting No Data Loaded For view this information you have to load a firmware file or read setting from device connected UPGRADE Firmware Firmware ON Line Configuration ATR Setting Mode r Option Mode Read Configuration Read ATR Enable ECHO Signal Function Check Connection Coverage Check FERAN Disable ECHO MASTER S N 45007L7HH863H851 V Connection OK Click Read Configuration to display the initial settings of the devic
10. ster Season Wireless Setting Functions Device version Communication Settings Before 4TR After ATR Baudrate Baudrate Parity Parity EVEN EVEN ATR SBt HHH PERK EHH HHH HELA HEH HE UPGRADE Firmware Firmware ON Line setae Setting Mode Option Mode Read Read Configuration E Read ATR LOGGER eo Signal Function SEASON Disable ECHO Check Connection Coverage Check Hide Exit MASTER S N 45007L7HH863H851 a Wireless Status OK Ie Connection OK SEASON and ATR Click Device Version to display the firmware version of the Slave and Master Season Wireless User Manual www duolabs com All rights reserved gt Device ersions MASTER Firmware version DL MASTER 1 0 SLAVE Firmware version DL SLA E 1 0 UPGRADE Firmware Configuratian ATR r Setting Mode VY Option Mode Read ATR LOGGER Enable ECHO Signal Function Check Connection Coverage Check E Hide Exit G MASTER S N 45007L7HH863H85S1 Ie Wireless Status OK a Connection OK SEASON Click Read ATR to quickly display only the ATR that has to be sent to the remote device Click Logger or Season in the Setting Mode pane to temporarily select an operating mode If you disconnect the Slave from the power supply the default operating mode is resumed Before selecting the desired mode it is necessar
11. y to make sure that the Slave is powered and able to establish a radio link as during the reading of the initial settings To be able to use the Logger mode you need to insert a smartcard in the slot of the Slave The Master is designed to receive the flow of data exchanged by the smartcard and reader and captured by the Slave In the Option Mode pane you can decide whether to enable or disable the echo Enable ECHO Disable ECHO of the bytes sent from the PC to the Master By default the echo is always enabled when you switch the Master on and it is not possible to save it as default configuration unlike the settings described above The byte echo is important because it guarantees full compatibility with the software applications that are already used with Season Logger 2 The Signal Function pane displays the options that you can use to check if the Slave and Master are communicating correctly You can click Check Connection at any time to verify if the Slave and Master are communicating correctly through the radio link You can also click Coverage Check to start the loop testing cycle that enables you to check the 7 Season Wireless User Manual www duolabs com All rights reserved radio link between the two units and quickly verify the existence of a radio coverage if one of the components is moved This function is very useful when the Slave and Master are located at a great distance or separated by obstacles that coul
12. yright laws The reproduction of this manual or of parts of it must be authorized in writing by Duolabs Srl Duolabs Srl thanks all people companies who that have supported the research and development of this product and all the beta testers and forums that have contributed to the circulation of information on this product The product contains a unique serial code Duolabs reserves the right to block the code without notice in the event of improper use of the device or in the event of introduction of new law requirements Duolabs Srl Riccardo Alessi Duolabs Srl Via Europa 21 36050 Cartigliano vi Italy Tel 39 0424 828355 Fax 39 0424 598665 www duolabs com Email info duolabs com 14
Download Pdf Manuals
Related Search