EK20-IDPAYI USER MANUAL
Contents
1. 5 0 TECHNICAL SPECIFICATION RFID FREQUENCY 13 56Mhz MIFARE 1K ISO14443A LOG MEMORY 2500 records DATA TRANSMISSION 19200 8 N 1 USB2 0 RADIO UHF SERIAL TTL RS232 DIMENSIONS 125mm x 70mm x 23mm WEIGHT 170g 6 0 HOW TO UPGRADE THE FIRMWARE ON READER Connect the USB cable to the READER Turn on the READER Click on the icon Wt of the program EK20 UPLOADER found in the folder IDPAYI_CD Select the USB COM PORT and the bitrate at 19200 Click UPLOAD PROGRAM Take the file IDPAYI BIN Select the number of the READER to be programmed Click START and wait the end of programming Upload OK Turn off the READER i r Ek 20 uploader W Upload Program Comm Port E Baud 19200 n 8 1 v Device Address lo x Echo Suppress UpLoading UpLoad Language UpLoad Program 12 11 2013 144 39 idle To 0 Pt 4 INOUT RFID s r l Via Milano 14 H 20064 Gorgonzola ITALY Phone 39 02 95138 139 Fax 39 02 95 158 694 Email info inoutsrl it Web www inoutsrl it2. cases don t serve because the main parameters are tested by the AUTHORIZATION command 2 HOST send the AUTHORIZATION command that contains POINTS to be added or subtracted for the VALUE in the CARD TIMEOUT in seconds SIGN or APPLICATION number from 1 to 14 After this command the READER verify for a CARD present during the TIMEOUT period If no replay send a TIMEOUT ERROR string to the HOST If verify a correct SECRET KEY and a valid EXPIRY DATE in the defined APPLICATION exec the SIGN operation for the quantity specified in POINTS on the actual CARD VALUE Send an EVENT LOG string to the HOST resuming the PAY operation data In case of error the READER send an EVENT STATUS string with warnings TIMEOUT ERR The command was not executed because out of time limit This error may be caused by No tag present A Tag is present but the CRYPTO KEY is uncorrect DATA_ERR The Tag is authenticated but some internal data are corrupted CLOCK_ERROR The Tag is authenticated but the IDPAYI calendar clock has a corrupted date Send a COMMAND O0 to update the calendar clock EXPIRY_DATE The Tag is authenticated but the Expiry Date read on the tag is out of limit OUTOFLIMIT The VALUE is out of limit In PREPAYED mode the limit is 0000 The pay session will be internally terminated The HOST can retry a new AUTHORIZATION command We suggest to send the SET DATE command after any EVENT LOG for a good date alignement
3. for 14 points decrement TIMEOUT insert in HEX the seconds to wait for a full PAY operation to be completed Example OFH for 15 seconds timeout SIGN insert the operation type 2BH for increment or 2DH for decrement APPLICATION insert the APPLICATION SECTOR number on which make the operations from 01H to ODH Replay with an EVENT LOG or an EVENT STATUS string REPLY E EVENT LOG FUNCTION VALUE DESCRIPTION READ OK 04H C T always O8H E S1 Indicate the operation performed on the CARD can be 10H or 20H 0 0 0 0 INCREMENT DECREMENT 0 0 NOU BRWNEF O E SO Indicate the CARD TYPE can be 41H 44H 84H BitO FREE Bitl POSTPAY Bit2 PREPAY Bit3 BONUS Bit4 USER Bits SUPERVISOR Bit6 1 PAY IDENTIFIER Bit7 SUBSCRIPTION CODE is the UID Card Code read on the Tag 5 bytes HEX DATE is the Event Date Day Month Year Hour Minutes Seconds in BCD TEXT 32 bytes HEX Pay operation descriptor Format example HEX OA 8C 0A 28 18 01 20 16 46 02 Pos 0 2 4 8 9 Pos 0 1 PREVIOUS AMOUNT 2 bytes HEX Ox0A8C Pos 2 3 FINAL AMOUNT 2 bytes HEX 0x0A28 Pos 4 to 7 EXPIRY DATE Day Month Year 3 bytes BCD 0x18012016 Pos 8 CARD TYPE FREE 46H PRE 2DH SUBSCRIPTION 41H Pos 9 APPLICATION SECTOR HEX 0x02 Other bytes to Pos 31 all 0x00 REPLY S EVENT STATUS DESCRIPTION LENGTH STATUS HEX VALUE 02H STATUS VALUE DESCRIPTION TIMEOUT ERR 30H The command was not executed because out of time limit This error may be caused by N
4. 3 0 PROTOCOL IDPAYI operates in polling mode The HOST is Master STX Start of string synchronization code ADX Is the address of the radio device from OOH to 07H LENGTH Is the number of bytes from the LENGTH to BCC comprise Example STX ADX LENGTH FUNCTION DATAO DATA11 BCC The length is 14 DEC OD HEX FUNCTION STATUS Is the FUNCTION to be executed or the STATUS of an operation executed DATAO to DATAn Are the data exchanged BCC Is calculated as the XOR of all bytes from STX included to last DATA BCC exluded Ex STX ADX LENGTH STATUS BCC gt 02H 00H 02H 01H BCC BCC 01H In case IDPAYI detects a BCC error on the received string don t exec the Command and don t transmit any reply STRINGS DESCRIPTION TO EXEC A PAY OPERATION COMMAND P POLL UID DESCRIPTION STX ADX LENGTH FUNCTION BLOCK N BLOCKS TAG TYPE C HEX NAME FUNCTION DESCRIPTION POLL UID 04H BLOCK 0 N BLOCKS 0 TAG TYPE 08H Read for a valid SERIAL CODE Replay with a READ UID string REPLY C READ UID DESCRIPTION LENGTH STATUS DATAO 1 2 3 4 HEX VALUE 02H HEX HEX NAME STATUS DESCRIPTION READ UID 04H Contains the Serial Code Number first 5 bytes read from the TAG COMMAND AUTH AUTHORIZATION DESCRIPTION ADX LENGTH FUNCTION POINTH POINTL TIMEOUT SIGN APPLICATION HEX VALUE 2B 2D O1HtoODH HEX NAME FUNCTION DESCRIPTION AUTHORIZATION 7EH POINTH L insert in HEX the number of points to be decremented Example 00 0EH
5. TECHNOLOGY DOC 368 R1 EN EK20 IDPAYI USER MANUAL EK20 IDPAYI here named READER is a fixed RFID device suitable to exec payment with the insertion method Exec all the operations of payment on High Security RFID CARDS MIFARE CLASSIC Operate on CARDS created using the IDPAYM mobile and the IDONE PAY program PREPAID can be used only in subtract FREE can be used as in add as in subtract SUBSCRIPTION verify only the expiry date Configured to exec operations under HOST CONTROL When a CARD has been inserted the READER wait for an AUTHORIZATION from the HOST Exec the PAY operation on CARD Send the LOG to HOST and save it in the LOG memory 2500 event LOG memory Wireless connection via RADIO UHF range 200mt or BLUETOOTH OPTIONAL or cable connection TTL RS232 USB connection available for Firmware upgrade Configuration and deferred Logs transfer Demo and Doc to explain the communication protocol to be implemented on the HOST Power supply 9 to 14VDC stabilized INDEX FIRST INSTALL HOW TO WORK WITH PAYM PROTOCOL AVAILABLE MODELS TECHNICAL SPECIFICATION HOW TO UPGRADE THE FIRMWARE AUBRWNE eRe ee 2s 1 0 FIRST INSTALL INSTALL USB DRIVERS 1 Copy into the PC the folder MCP2200WindowsDriver 2 In DriverInstallationTool select the folder X64 for 64Bit or X86 for 32bit platforms Launch MCP2200DriverIstallationTool Press Install and wait to the end of drivers insta
6. llation INSTALL USB ON YOUR PC 1 Turn off the READER Insert the USB plug and turn on the READER 2 The PC begin the new device install Wait for the complete install of the assigned COM PORT INSTALL RADIO PEN UHF ON YOUR HOST IF USED 1 Insert the supplied RADIO PEN UHF into the USB connector of the PC 3 The PC begin the new device install Wait for the complete install of the assigned COM PORT INSTALL IDONE PAY SOFTWARE ON YOUR PC Dowload the IDONE_PAY setup from the site www zetanetWweb cccccceceeeeeeeeeeeeeees Launch IDONE_PAY_40x_Setup and follow the instructions to end Will be created an icon on your desktop lie CONFIGURE IDPAYI USING THE PROGRAM IDONE PAY Connect the USB CABLE Launch the program IDONE PAY 2 CUSTOMER MANAGEMENT CARD MANAGEMENT CREATE CARD LOG ARCHIVE MANAGEMENT PROGRAM OPTIONS READER SETTINGS EXIT CONNECTED CO N oN o 01 11 2014 15 48 Click PROGRAM OPTIONS I PROGRAM OPTIONS COMMUNICATION PARAMETERS COMTI USE Serial Port w USE RADIO READER 0 C READER 4 gt V READER 1 CI READER 5 CONNECT READER 2 C READER 6 CI READER 3 CI READER 7 we RELOAD COM PORT LIST Enable Communication at Startup LANGUAGES ae A ENABLE CUSTOMER MANAGEMENT sy 1 ITALIAN ENGLISH FRENCH CURRENT LANGUAGE ENGLISH a 7 CARDS DEFAULT TEXT APPLICATION PASSWORD Uncheck USE RADIO Set the USB COM PORT Click CONNECT a
7. nd click OK to exit Now click READER SETTINGS options DEVICE NUMBER fo SERVICES LIST DATE amp TIME 03 05 2014 10 25 26 DEFAULT KEY FF FF FF FF FF FF APPLICATIONS LIST NEW KEY 14 3C0 44 34 F 7 39 USE OPERATORS USE SUPERVISOR CARD CARD RECHARGE LIMIT EXPIRY DATE MONTH Set the DEVICE NUMBER 0 and click the button to send to the READER Click the button to send the actual DATE amp TIME to the READER The DEFAULT KEY is preset with the code FF FF FF FF FF FF Do not change Press the button to send it to the READER The SECRET KEY protects your CARDS against fraud and duplication Enter 12 digits with numbers from O0 to 9 and letters from A to F Example 3C 26 D9 67 FA 59 For safety reasons the SECRET KEY will not appear again you will see always FF FF FF FF FF FF Press the button to send it to the READER IMPORTANT Write this code and keep it in a safe place Click SEND to transmit the other parameters to IDPAYI A bar indicates the good transfer Now IDPAYI is ready to operate 2 0 HOW TO WORK WITH IDPAYI The HOST will be connected by cable or wireless at a bit rate 19200 N 8 1 1 HOST can send a READ command to the READER If a CARD is inserted the READER read the CARD UID Ex to verify if this code exists into a DATABASE or into a BLACK LIST NOTE This command is optional In many
8. o tag is present A Tag Mifare is present but the CRYPTO KEY is uncorrect CMD_OK 04H A command has been correctly executed DATA_ERR 01H The Tag data are corrupted CLOCK_ERROR 31H The Tag is authenticated but IDPAR calendar clock has a corrupted date Send a COMMAND 0 to update the calendar clock EXPIRY_DATE 32H The Tag is authenticated but the Expiry Date read on the tag is out of limit BLACK_LIST 33H The Tag is authenticated but the tag code is present into a Black List OUTOFLIMIT 34H The VALUE is out of limit In PREPAYED mode the limit is 0000 COMMAND 0 SET DATE NAME FUNCTION DESCRIPTION SET DATE 79H Change the DATE Day Mon Year Hour Min Sec on the READER BCD format DATE Ex 31H 12H 12H 15H 59H 59H STRINGS DESCRIPTION TO EXEC CONFIGURATION COMMAND APP SET APPLICATION SECTOR BCC HEX VALUE 02H 0 04H 32H _ O1Hto0EH__ 00H__ HEX NAME FUNCTION DESCRIPTION SET APPL 32H Enables all the read and write operations on the specific APPLICATION SECTOR COMMAND WKC WKEY_ON_ CHIP N_KEY 6 bytes 02H NAME FUNCTION DESCRIPTION WKEY_ON_CHIP BOH This command write the N_KEY in ALL the SECTORs 1 to 15 into the KEY memory of the READER 4 0 AVAILABLE MODELS EK20 IDPAYI R Basic model with USB and RADIO UHF EK20 IDPAYI TTL Basic model with USB and SERIAL TTL EK20 IDPAYI 232 Basic model with USB and SERIAL RS232 For other options BLUETOOTH WIFI contact us ev L E gt The RADIO PEN UHF is quoted a part
Download Pdf Manuals
Related Search