easyTEMP temperature sensor for easyTRACK „F” module version
Contents
1. easy TEMP Tell easyT EMP temperature sensor for easy TRACK F module version Installation and user guide v1 2 28 11 2011 Wiring White 12 24V Brown OV GND Green Signal wire output connect to input F2 of the easy TRACK module Yellow Signal wire input connect to Green wire of further temperature sensor Measuring and operating temperature range 30 C 70 C Measuring accuracy 1 C In case of using only one temperature sensor the Yellow wire should not be connected If using more sensors connect the Green wire of the first sensor to input F2 of the easy TRACK module and then connect the Yellow wire of each sensor to the Green wire of the sensor next in line serial connection The last sensor s Yellow wire should not be connected Maximum 3 temperature sensors are supported by an easyTRACK module connected as specified above and in the figure below If a fuel probe is necessary to be connected to the same input this is possible by connecting the Green wire of the fuel probe to the Yellow wire of the last temperature sensor 1A fuse must be inserted in the supply circuit where connecting to supply voltage as shown in the figure below Fix the sensor and the cable properly to avoid damages of the unit Wiring diagram Bt Al 42 7 WIG COG amp be OE OE DRIE ARAN AR pE 7 N 1A 12y oE 5 24V BROWN m 3 Temp sens 1 Temp sens 2 Temp sens 3
Download Pdf Manuals
Related Search