Moldplus Server V5.2 User Guide
Contents
1. The above image displays the new Moldplus Server Manager interface The display has been simplified to be easy and straightforward to use and configure There are only 2 tabs the event log and the licenses display Visual icons display if the server is active or not running Page 5 of 39 2 The license registration is done through the Register License button only If an old license is found it is automatically backed up to a licensesBackup folder The XML license file log file and moldserv ini file are stored to the Public Documents Moldplus Moldserv folder 3 The Server Manager checks for administrator rights before launching If the user is not an administrator a warning is presented and the server is not launched Start Server 4 Service is installed only when you click on There is no need to configure the Service with specific user names and passwords anymore for different Stop Server operating systems The Service is also uninstalled when you click on default Moldplus Server is always run as a Windows Service 5 Ifthe Mastercam registry key does not exist for the SIM setting the Server automatically forces the SIM setting to NetHasp and Local upon launching If the SIM is not a HASP SIM the user is warned Also if the SIM is unplugged the Server is automatically stopped till the SIM is plugged in again 6 This document PDF Help file can be viewed by clicking on the Help button 72. Page 36 of 39 2 3 Moldplus Client Launch Issues 2 3 1 Moldplus Floating License Message Problem Upon launching Mastercam if you get this error message when you launch a Moldplus product there is good chance that Moldplus Server is not running OR your Workstation does not have access to through the Firewall Moldplus error message MOLDPLUS X LIC NH SERVER NOT FOUND CATIA Translator error messages Floating License Error The Moldplus Server does not respond Verify that Moldplus Server is currently running on the Server system Please report Case 15 Error 10054 MN ProDrill License rights A Server not Found Reference error 22 Page 37 of 39 Solution 1 Ensure that Moldplus Server is running on the Server and that the licenses are active 2 Thecorrect IP address and UDP are defined in the INI files of the respective products on the client system If you are prompted for the IP address and Server port number enter the IP address and Port number that is displayed on the Moldplus Server Manager window 3 Ensure that Mastercam exe and any other Moldplus application that needs access to the network to verify the licenses have access through the Firewall 2 3 2 Exceeded Rights Message Problem MOLDPLUS ES LIC NH ERR EXEDED RIGHTS Solution If you get this error message it means that you are running the maximum number of licenses available for use Please verify and make s
3. WARNING 1 Editing any of the XML file s contents OR changing the file name prefix from M will result in an invalid license file Log Display Displays the Server event log This file is stored in the same folder as the license file Ea 9 Moldplus License Server Manager v5 2 Server info and settings ii Serial Number 987654321 Stop Server IP to use 192 168 242 1 View Lic File Port 897 Error No license file registered please register a valid license file with the register button above Successfully registered license M ABC_Client_N99999 Dec 31_12 All_products xml Moldserv service is not installed trying to install it now Moldserv service successfully installed Successfully started Moldsery service Server started Page 30 of 39 Licenses Display This tab is displayed whenever the Server is running and active Level Narne Moldplus Standard Mon Dec 31 2012 Moldplus Professional Mon Dec 31 2012 Moldplus Super Trim Mon Dec 31 4012 Moldplus Saxiskit Mon Dec 31 2012 Moldplus CATIA V5 Read Mon Dec 31 2012 Moldplus CATIA V5 Read Solids Mon Dec 31 2012 Moldplus CATIA V4 Read Mon Dec 31 2012 Moldplus CATIA V4 Write Mon Dec 31 2012 Moldplus CATIA V4 Solids Mon Dec 31 2012 Moldplus CATIA V5 FTA GDT Mon Dec 31 2012 2 3 4 5 6 T 8 g S S S S S S 5 5 5 5 hom om oh moh mom om hy Numbers A number count of the differen
4. Burn New folder sk paa Marne Date modified Type Size HE Desktop 2 Imsetup exe 10 Nov 08 1 28 PM Application 16 357 KB m Downloads E NHaspA exe 14 Mar 11 1 11 PM Application 728 KB de Dropbox Open Source Software Licenses docx 26 Mar 11 3 29 PM Microsoft Office 65 KB After launching the Moldplus Server and registering the license the files are stored to the following location Windows 7 64 example Je C Users Public Documents Moldplus Moldserv Organize Share with Burn New folder wT Favorites BE Desktop m Downloads de Dropbox 5 Recent Places Moldserv Marne de licensesBackup Documents library co M ABC_Client_N99999 Dec_31 1 All_products xml y ManagerLog tet of moldserv ini Libraries E Documents Page 15 of 39 After installation Once the installation is completed successfully you can perform the following operations to ensure that Moldplus Server 5 2 is up and running Windows 2003 Server Rx and Server 2008 Rx Configuration Ensure the following 1 Installation is done from the local system itself by someone physical present at the Server If not by using a software that simulates physical presence at the server such as the HP Ilo Remote Connect software 2 If the Server still fails to launch after installing the above solution update the Server to the latest Windows files by running the Windows Update software while connected to the Internet Install the latest NET updat
5. No license file registered please register a valid license file with the register button above Successfully registered license M ABC_Client N99999 Dec 31 12 All products xml Page 23 of 39 Un installation To uninstall Moldplus Server launch the Moldplus Server installation program from the Control Panel Add or Remove Programs If it detects that an installed version exists on the system it will provide the option to perform an uninstall Warning If the Moldplus Service is still active or installed upon launching the installation program the following message will be presented Uninstall the Gar hom the eee Sanus 51 dialog by clicking on Stop Server before performing the uninstallation This installation will now abort In the case of the above message launch Moldplus Server Managerand click on If Moldplus Service and Server were stopped the following message is displayed upon launching the installation program Moldplus Server V5 2 Installation InstallShield Wizard Preparing Setup Please wait while the InstallShield Wizard prepares the setup Moldplus Server V5 2 Installation Setup is preparing the InstallShield Wizard which will guide m E LUATI EELS E IE ELO ONIL E ESE Ma Moldplus Server 5 2 Uninstall This uninstall will remove all of the files and folders installed by Moldplus Server V5 1 InstallShield Cancel Page 24 of 39 When the program has been removed the following messa
6. 4 Sim number 987654321 MOLDPLUS V1I052 50 2014 02 02 V10 5 MRAZ SPT Mab MIO oim type NWETHASP NETWORK Check Updates Usertyoe Industrial Froducts Maint Date Days lett seatused State 1 Moldplus Standard 01 Jan 1 z Diz gt Moldplus Professional Maan ie 02 gt Moldplus Super Trim Mene Ms gt Moldplus Saxiskit Manie Oe 11 Moldplus CATIA W5 Read Manie 172 12 Moldplus CATIA Y5 Read Solids 01 Jan 12 Oye 13 Moldplus CATIA 44 Read 01 Jan 12 Oe 14 Moldplus CATIA 444 Write Melee Oe 16 Moldplus CATIA Y4 Solids 01 Jan 12 0r 16 Moldplus CATIA Y5 FTA GDT lena E 0r 100 FroDrill 01 Jan 12 Oe SELES ESES ESES ESES ESE server configuration Status Moldplus server OK Host Name Serveri23 Host F 192 168 1 3 setlPiPon HostPon 59 Page 26 of 39 ProDrill Software The latest versions of ProDrill V4 will automatically detect the Moldplus Server and configure the IP and Port number This data is stored in the c moldserv moldserv dat file same location as Moldplus and CATIA translator ProDrill V3 and below are also designed to find the Moldplus Server IP and port automatically Upon launching the first time with ProDrill if it does not find the Moldplus Server automatically it will prompt you for the IP address with the following dialog NetHasp location Current SIM Current Access Rights Number 987654321 1 Maintenance Type NetHASP Local January 01 2011 HASP access Code Moldsery Network access IP Addre
7. at support moldplus com with your questions Moldplus Server is designed to work along with the Aladdin HASP License Manager The Moldplus Server executable enables users to use Moldplus in a network environment The number of licenses you purchase for Moldplus products limit the number of licenses you can run at any given time The license information is stored in an XML file that is provided by Moldplus SA The concept behind using Moldplus products in a network environment is to enable multiple users to use the relevant Moldplus product from different work stations using only one software protection module from a station that is called the Moldplus Server This installation should be performed on the system that has the HASP SIM physically installed and the same location where the HASP License Manager is installed Page 3 of 39 Products supported by Moldplus Server V5 2 The following products are supported to run under the Moldplus Server Manager Note that these products can run under Mastercam X6 and below up to Version 9 1 Moldplus 10 5 MR2 SP1 with Maintenance Moldplus 10 5 MR2 SP1 Professional Electrode with Maintenance Moldplus 5 Axis Design Toolkit 10 5 MR2 SP1 with Maintenance Suprtrim 10 5 with Maintenance Moldplus 10 0 with Maintenance Moldplus 10 0 Professional Electrode with Maintenance Suprtrim 10 0 with Maintenance Moldplus CATIA V5 Read with Maintenance Moldplus CATIA V5 Solids with Maintenance Mo
8. gt lt nethasp gt lt hasp gt lt dealer Moldplus SA lt dealer gt lt licences gt lt signature gt gLnxdRY9Ub4n30EUVuvKAF2YXIP9kf1Ax4FokooxtGTnmKi1WVosECz mQpl7ROG6Mgz sFA Q5LsElntHHH5PJEcpYCSeUrTiKaQhijoeegNSwAgqNT k5Fyt1LBWyMw6kTYs wIHhhifpsOopdhtoCISHg E4MTy2VbDsCOPHbK1Ik5SRt PoifBcjrtBCpMJxfaQP1i 6UrnudVCT7ax6BbxEqOE2Ck 27uFEdnQhxXY yW5iZm977Eg4Cj6p oBUsmMgikKoUW L3rPKeUskpam rgUnngLIz1VSgExKB CopZIboLTYMFHy5iOaRf LSikPdecsIHF mftYEKVflwy5Pw2CzvlU740P2 lt signsture gt lt moldplus gt lus Moldserv Organize Sy Open Share with E mail Burn New folder me Desktop Documents library Downloads Aa Moldserv Dropbox Name 5 Recent Places Je licensesBackup Libraries 2 moldserv ini Es Documents E ManagerLog tt a Music l M ABC_Client_N99999_Dec_31_12_All_products xml W Page 28 of 39 Network Information NOTE The Moldplus license information will NOT be displayed when you run the NHASPX EXE The Moldplus Server is independent of the Mastercam SIM dialog information The following information will be presented only when you launch the E a Desktop or Programs folder from the The following details will explain all the options of the Moldplus Server 5 2 dialog 1 1 Moldplus License Server Manager 9 Moldplus License Server Manager v5 2 pa 2 3 4 5 6 T 8 g Serial Number IP touse Level Name Moldplus Standard Moldplus Professional Moldplus Su
9. installed run the LMSETUP EXE program found in the Additional Files folder after this installation Next if the HASP License Manager is installed the installation checks to see if the Hasp License Manager is installed as a Windows Service on the system checks the Windows Registry to see if it exists in the Windows Services If the information doesn t exist in the Windows registry it displays the following message to the user and continues NETHASP License Manager is not installed as a Windows Service With SL the current setting Moldplus Server will need to be launched using the shortcut placed on the Windows Desktop OR copy the Moldserv exe file to the Programs Startup folder to automatically launch it at system boot You can set the NetHasp License Manager as a Service AFTER performing this installation by launching Program Files Aladdin HASP LM Additional Files LMISETUP EXE and selecting Service nhservice exe during the install process amina Page 10 of 39 Displays the Moldplus License Agreement Click on Yes after reading the License agreement to continue Moldplus Server V5 2 Installation Installshield Wizard HA MOLDPLUS SA Software License Information End User License Agreement Please read this Software License Agreement carefully Press the FAGE DOWN key to read the rest of the License Agreement MOLDPLUS SA Software License Agreement IMPORTANT NOTICE PLEASE READ THIS STATEME
10. 5 2 Installation is configuring your new software Installation Installshield Cancel Page 12 of 39 Once the files are copied successfully you will get an install complete successfully message m Moldplus Server 5 2 Installation Completed Moldplus Server 5 2 for Mastercam Versions 46 and below has been installed on your system You need to perform the regular Moldplus product installation on your workstations For help on using Moldolus Server please read the Moldplus Server Help pdf located in the Start Programs Moldplus Server 5 2 program group You can also access it by clicking on the Help button within the Moldplus Server Manager dialog lt Back mim Cancel _ Once this screen is displayed this document in PDF format will be automatically launched and presented to the user Page 13 of 39 Moldplus_Server_Help_ February 02 2012 pdf Adobe Acrobat Pro Extended Soe File Edit View Document Comments Forms Tools Advanced Window Help 12 MOUDPLUS Moldplus Server V5 2 8 The install will 1 create a Program Files group with the Moldplus Server PDF document and a shortcut to launch the Moldplus Server 5 2 and 2 place a Shortcut icon to launch the Moldplus Server 5 2 on your Desktop BS b Moldplus Server 5 2 Installation Guic Moldplus Server 5 2 Sewer 5 2 Moldpl s Page 14 of 39 Folder Location
11. Anew License Server diagnostics tool has been included This utility will help test the license functionality The utility can also be placed on client systems to test the license server access 8 Anew LOG file is created that keeps track of the Server use This file is stored in the same directory as the XML license and the INI file The INI file keeps track of the Server IP and port the XML license file used and the DLL used to access the SIM 9 Most new Windows Operating systems are supported including the latest Server versions and service packs Page 6 of 39 Customer Requirements 1 Mastercam NetHasp SIM must be connected to the system that has the Aladdin Hasp Licenses Manager installed The Mastercam NetHasp SIM setting needs to be set to Local and NetHasp NhaspX exe c 2011 CNC Software Inc v3 5 SIM type HASP MetHASF Mode Local o Network Update code file 10 Mastercam Mill Entry Read 10 Mastercam Mill level 1 ES 10 Mastercam Will level 2 Is 10 Mastercam Mill level 3 Update 10 Mastercam gt Lathe Entry 10 Mastercam Lathe level 1 Active licenses 10 Mastercam Wire 10 Mastercam Design 10 Mastercam A Solids 10 Mastercam Router Entry 10 Mastercam Router 10 Mastercam Router Plus 10 Mastercam Router Pro 10 Mastercam Art 10 Mastercam Multi 10 MEtorst 20 10 MEtor5 30 10 Nesting 10 Engraving 10 CurveSax Sho p User type Industrial Serial number 487654321 Chart
12. MOL PLUS Moldplus Server V5 2 User Guide n date February 03 2012 TABLE OF CONTENTS INTRODUCTION oi a o Seen ER 3 PRODUCTS SUPPORTED BY MOLDPLUS SERVER V5 2 cccccccsscsssccccccccccccccccccccscccsccccccscccscccscccccceccees 4 WHAT S NEW IN VERSIONS Za asas 5 WHAT S NEW IN VERSION 5 0 cinco 5 CUSTOMER REQUIREMENTS naa A E A Aa 7 INSTALLATION PROCESS A nse ae aac scant acannon 9 FOLDER LOCATIONS la 15 AFTER INSTALLATION ssc cccivccccceecesvccsscecccotscessevacsesceceutatececascdedsdesetscessbasdescalesesevcucdeccdecssestsbececousbeseessncecccduesseent 16 WINDOWS 2003 SERVER RX AND SERVER 2008 RX CONFIGURATION sccecceccecescecceccecescesceccecescescescesescescescess 16 MOLDPLUS SERVER CONFIGURATION ccscecececececccccccccccccceccccceccecceeececcaeaeaeceeeceteneeecececeueceneasesasacacesesasacacsacueess 18 XM b License IKE QISUT ACIOTE ProCare NOes a oa as rah eae a aa ees 19 UN INS TALIA TION iii da 24 CLIENT COMPUTER LICENSE CONFIGURATION cccccccccccsccccccccccccccccccccccccccccccccccccescccccscccesccscsccces 26 Moldplus Moldplus Professional and CATIA Translator Software ooooooooooooooncncnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnss 26 POD YUU SO WOTE oiae decayed eee ceed EEI iaa 27 XAML LICENSE FILE DETAILS cours 28 NETWORKINEORMATIO Noia idad 29 1 1 MOLDPLUS LICENSE SERVER MANAGER iaa 29 ta MOIOPIUS LICENSES O Pera a ica 33 L3 Moldplus TEN DOE ACA So ee 33 MROUBEE STO
13. NLY is identified as a Nethasp Network SIM ONLY Page 8 of 39 Installation Process The Moldplus Server installation runs as follows Moldplus Server V5 2 Installation InstallShield Wizard Welcome to the Moldplus Server 5 2 Installation for Mastercam Moldplus Server 5 2 for Mastercam will be installed on your sistem that contains the NETHASP License Manager Software and WETHASP SIM for Mastercam You only need to INSTALL Moldplus Server ONCE lt Back _ 1 Launches the installation and presents the welcome screen as shown above 2 Performs a check to see if the system is Windows XP Vista 2003 or 2008 Server If itis one of these operating systems issues a warning to have administrator privileges before proceeding The install also checks to see if you have administrative rights If you do not the installation aborts Page 9 of 39 The installation checks to see if the Aladdin Hasp License Manager is installed on the system checks to see the Program Files Aladdin HASL LM folder exists If the information doesn t exist it warns the User with the following message and continues with the installation rver V5 0 Installation InstallShield Wizard The NetHASP License Manager was not installed on your system using Jah the Mastercam installation OR LMSETUP EAE Please do the following after the Moldplus Server installation 1 Verify if the NetHasp Server application was installed 2 Tf it was not
14. NT SND LICENSE AGREEMENT BEFORE USING THIS SOFTWARE Er CLICKING ON THE BUTTON MARKED YES BELO OF Er CONTINUING TO USE THIS SOFTWARE TOU INDICATE YOUR INTENTION TO BE BOUND BY AND ACCEPT THE TERMS AND CONDITIONS OF THE SOFTWARE LICENSE IF YOU DO NOT AGREE TO THESE TERMS AND CONDITIONS YOU MAY 2 Do pou accept all the terme of the preceding License Agreement IF you Print select No the setup will close To install Moldplus Server V5 2 Installation pou must accept this agreement Back ez Ifthe Hasp License Manager installation was found the directory automatically defaults to Program Files Aladdin HASP LM folder A new sub folder Moldplus Server 5 0 will be created under the HASP LM folder to install the Moldplus Server program files Another folder called Additional Files will also be created under the HASP LM folder to install other relevant files The following dialog will be presented at this stage Page 11 of 39 Moldplus Server V5 2 Installation InstallShield Wizard Choose Destination Location Select folder where setup will install files Moldplus Server files will be installed under a new sub directory called Moldplus Server B04 under the Program Files 4laddinsHAsP LM directory Destination Folder C Program Files 36 4laddin HASP LM InstallShield The files are copied to the respective folders _ Moldplus Server V5 2 Installatio Setup Status Moldplus Server
15. O TENG lt a aes 33 2 1 NETHASP LICENSE MANAGER NOTIN TALLE a a e A O 33 2 2 MOLDPLUS SERVER LAUNCH ISSUES a ia iaSS 2 34 2 2 1 Nethasp SIM number not displayed ooooonnnnnnnucucucuuooooananannannononnn nooo nono ono n ono n non nono nono non nn n nn nn nn a 34 2 3 MOLDPLUS CLIENT LAUNCH ISSUES ccececscececccscecscsceccececececcceeecceeeececececececeaeasacesesecesasacacaeasacucess 37 Zod Moldplus Floating License Message iii eee eee E 37 2 3 2 Exceeded RONG MESS TO a a A E E ES 38 Zaa MOEBIUS Server Connect CIT ONS 0 AA AA 38 CONCEUSIO NS cdi aci oia 39 Page 2 of 39 Introduction This document is designed to assist you in properly installing and configuring Moldplus Server Version 5 2 on your Mastercam Network system You will find step by step instructions to guide you through the proper installation and configuration of Moldplus Server The installation program for Moldplus Server is designed to install the required files for Moldplus Server to function smoothly along with the Aladdin HASP License Manager for Mastercam It performs several checks to ensure that the Mastercam NetHasp SIM is correctly installed and configured and that the Aladdin License Manager is properly installed on your system It will warn the user if it finds that certain conditions are not met It is highly recommended that you READ THIS DOCUMENT before proceeding with the installation If your answers are not found here you can email us
16. d NOT BE PERFORMED USING A REMOTE DESKTOP CONNECTION It should be configured directly on the system that is being installed on OR through a REMOTE CONSOLE connection A Remote Console connection simulates a physical presence at the remote computer server Page 34 of 39 Problem If the SIM is not identified the following message will be displayed with a list of possible solutions This is the main error displayed for any of the described problems below IF to use 192 1685 242 1 Using moldservC failed Using moldservB failed Using moldservA failed Error No sim found Please check that you have a NetHASP sim connected to this computer an HASP will not work The Moldplus Server Manager will most likely display a SIM number of 0 and or display an incorrect SIM number Ifyou do not see the NetHasp SIM number displayed when you either start the computer or launch Moldplus Server check the following Problem 2 Windows Firewall Issue Windows Firewall does not have the NetHasp License Manager and Moldplus Service and executable in the Firewall Exceptions Page 35 of 39 Solution Verify the Windows Firewall or other equivalent Firewall software to ensure that the 3 products are added to the Exceptions list or given permission to access the Network Go to Control Panel Windows Firewall This is the main Firewall window that indicates that the status of the Firewall In this case it is active on Wind
17. d here is 987654321 Ifa warning is presented then you will need to take the necessary measures to check and ensure that the SIM is properly identified Moldplus License Server Manager v5 2 Server info and settings sra um 987654321 IP to use 192 168 742 1 Z Using moldservC succeeded Error No license file registered please register a valid license file with the register button above Page 18 of 39 XML License Registration Process 2 To register the provided XML license file click on the select the license file from the location it is stored at 9 Select License File Organize New folder BL Desktop Mame Date modified mM Downloads Dropbox S Recent Places M ABC_Client_M99999 Dec 3112 All products xml 28 Jan 12 5 30 PM Libraries E Documents al Music ES Pictures E Videos Y Homegroup AS o License Files xml T The result of doing this with the sample code will be as follows Page 19 of 39 Error No license file registered please register a valid license file with the register button above Successfully registered license M ABC_Client_N99999 Dec 31 12 All_products xml Page 20 of 39 3 Click on to activate the licenses The software is installed as a Service and launched automatically 2 Moldplus Server Manager v5 Error No license file registered please register a valid license file with the reg
18. date 02242011 End date 02 28 2012 Maintenance expiration date 022812012 No Catia addons Local NetH 45F 10 found 2 Ifyou haven t installed the Aladdin Hasp License Manager software please perform the installation Installation software LMSETUP EXE also provided with the Moldplus Server 5 2 installation from the Program Files Aladdin HASP LM Additional Files folder To verify that the Nethasp License Manager is installed and running on your system you will notice an icon on the bottom right 4 for NetHasp License Manager 8 32 3 You have downloaded the latest installation version of Moldplus Server 5 2 Page 7 of 39 10 11 12 13 Ensure that the latest HASP driver is installed on the Server system This is automatically done when the Hasp License Manager is installed OR if the Mastercam software installation is performed Please make sure you are logged on as Administrator or with administrative privileges before performing the installation The Hasp License Manager should be installed as a Windows Service You will be prompted by the Hasp License Manager installation if you wish to install as a Service or Application Choose to install as a Service The maximum number of simultaneous users allowed with Moldplus License Manager is limited to 100 If any Windows Firewall or other System Security applications are active you will need to ensure that the installed applications are included in the Exceptio
19. es also 3 Ensure that DEP settings are set as follows The DEP Data Execution Prevention application could affect the launch of the executable or as a Service In this case set it to only run for essential windows programs This can be accessed from Control Panel System Advanced tab and clicking on the Performance Settings button The following Window is an image capture from a Windows 7 0 64 bit system Page 16 of 39 You must be logged on as an Administrator to make most of these changes Performance Visual effects processor scheduling memory usage and virtual memory User Profiles Desktop settings related to your logon Click on the DEP tab and ensure that the setting is in this manner eomme E E Data Execution Prevention threats How E it work Turn on DEP for essential Windows programs and services only 9 Turn on DEF for all programs and services except those I Be Warning Any changes made to the DEP settings requires a system reboot Please warn your users before performing a system reboot You can continue with the following steps when the Moldplus Server successfully launches after these steps Page 17 of 39 Moldplus Server Configuration Mold plus 1 Launch the Moldplus Server 5 2 Manager from the icon ERM A created on your desktop The following dialog is presented Your NetHasp SIM number will be displayed in the Serial number field The example SIM number use
20. es are specified with the following format YHMDD moldplus gt licences gt lt date gt 71217 3 A lt date gt lt customer gt ABC Limited lt customer gt lt customer email gt lt customer address gt lt nethasp gt 51M Number 654371 Type D gt product ProdID 1 Name Moldplus Standard Sests 2 Mode Maintenance MaintEndDate 230101 gt product ProdID 3 Name Moldplus Professional Seats 2 Mode Maintenance MaintEndDate 80101 gt product ProdID 4 Name Moldplus Supertrim Seats 2 Mode Maintenance MaintEndDate 80101 gt product ProdID 11 Name Moldplus CATIA V5 Read Seats 2 Mode Maintenance MaintEndDate 80101 gt product ProdID 12 Name Moldplus CATIA V5 Read Solids Seats 2 Mode Maintenance MaintEndDate 80101 gt product ProdID 13 Name Moldplus CATIA V4 Read Seats 2 Mode Maintenance MaintEndDate 80101 gt product ProdID 14 Name Moldplus CATIA V4 Write Seats 2 Mode Maintenance MaintEndDate 80101 gt lt product ProdID 15 Name Moldplus CATIA V4 Solids Seats 2 Mode Maintenance MaintEndDate 80101 gt product ProdID 16 Name Moldplus CATIA V5 FTA GDT Sests 2 Mode Maintenance MaintEndDate 30101 lt product ProdID 100 Name ProDrill Seats 2 Mode Maintenance MaintEndDate 80101 gt product ProdID 102 Name ProPocket Seats 2 Mode Maintenance MaintEndDate 80101 gt lt SIM
21. ge is displayed Moldplus Server V5 2 Installation InstallShield Wizard J A Moldplus Server Uninstallation Complete Moldplus Server 5 2 has been completely removed from your system Back Finish E Cancel NOTE The XML license file the LOG file and the INI files will not be removed upon uninstalling the product They will still reside in the Public Documents MoldplusiMoldservi folder Page 25 of 39 Client Computer License configuration Products that run under Moldplus Server are configured in different ways The common requirements for all of them however are the Server IP address and Server port number The Server IP address is the IP address displayed on the Moldplus Server Manager The following are the processes to configure the different Moldplus products Moldplus Moldplus Professional and CATIA Translator Software The latest versions of Moldplus and CATIA Translator will automatically detect the Moldplus Server and configure the IP and Port number This data is stored in the c moldserv moldserv dat file Once the data is stored in the C moldserv moldserv dat file you will be able to use Moldplus and the CATIA translator to the maximum licenses allowed NOTE If this file does not exist on the system create the c moldserv folder and then create the moldserv dat file within that folder That will ensure that the Moldplus Server is identified About Moldplus Copyright 1997 2012 Moldplus 5
22. ister button above Successfully registered license M ABC_Client_N99999 Dec 31 12 All products xml Moldserv service is not installed trying to install it now Moldserv service successfully installed Successfully started Moldsery service Server started Page 21 of 39 4 The Licenses tab is automatically displayed if everything is functional The licenses displayed will depend on what products you purchased from Moldplus SA In this sample case 2 licenses of all our products are displayed Level Narne Moldplus Standard Moldplus Professional Moldplus Super Trim Moldplus 5axiskit Moldplus CATIA V5 Read Moldplus CATIA V5 Read Solids Moldplus CATIA V4 Read Moldplus CATIA V4 Write Moldplus CATIA V4 Solids Moldplus CATIA V5 FTA GDT 3 3 4 5 6 T 8 g E Mon Dec 31 2012 Mon Dec 31 2012 Mon Dec 31 2012 Mon Dec 31 2012 Mon Dec 31 2012 Mon Dec 31 2012 Mon Dec 31 2012 Mon Dec 31 2012 Mon Dec 31 2012 Mon Dec 31 2012 So Gc e o oc ao 5 5 ONCE MOLDPLUS SERVER IS RUNNING and the licenses are displayed as shown in the previous image in the Moldplus Server Manager dialog you can launch versions of Moldplus products from Client stations If Moldplus products were not installed on the client stations you can perform the regular product installation on those systems before proceeding Page 22 of 39 8 To stop the License Server click on 2995 remove the Moldplus Service Error
23. ldplus CATIA V5 FTA GD amp T with Maintenance Moldplus CATIA V4 Read with old codes and Maintenance Moldplus CATIA V4 Write with old codes and Maintenance Moldplus CATIA V4 Solids with old codes and Maintenance ProDrill 4 0 with Maintenance Moldplus 9 2 with Maintenance Moldplus 9 2 Professional Electrode with Maintenance will need the Moldplus 9 2 code also to function Suprtrim 9 2 with Maintenance ProDrill 3 0 2 0 and 1 2 Moldplus 9 2 035 Moldplus 9 2 035 Electrode will need the Moldplus 9 2 code also to function Moldplus Maintenance dates are independent of the Mastercam maintenance dates The dates displayed in the Moldplus Server manager will indicate when the Moldplus maintenance will expire Page 4 of 39 What s new in Version 5 2 A memory handles leak was fixed in this version The handles would populate the physical memory usage and create a resource limitation What s new in Version 5 0 1 Complete interface has been re written from the prior version 4 12 Level Id 1 Moldplus Standard Sat Jan 1 2011 Moldplus Professional Sat Jan 1 011 Moldplus SuperTrim Sat Jan 1 2011 Moldplus CATIA V5 Read at Jan 1 2011 Moldplus CATIA V5 Read Solids Sat Jan 1 2011 Moldplus CATIA V4 Read Sat Jan 1 2011 Moldplus CATIA V4 Write sat Jan 1 2011 Moldplus CATIA V4 Solids at Jan 1 2011 Moldplus CATIA V5 FTA GDT Sat Jan 1 2011 ProDrill Sat Jan 1 2011 Level Name Date pa 2 3 4 5 6 T 8 g
24. led run the LMSETUP EXE program found in the Additional Filesi folder after this installation Page 33 of 39 If you got this message during the Moldplus Server installation then you have not performed the NetHasp License Manager Installation Solution Run the LMSETUP EXE file found in the Aladdin HASP LM Additional Files folder This will launch the NetHasp License Manager installation install the necessary files and configure the NetHasp License Manager to run on your system To set it as a Service ensure that you select the following option while performing this installation d Installation Type H A S P Do you want to install HASP License Manager as an jl application or as a service Application nharw32 exe HASP LM is curently running twill be stopped if you continue to install a new wersion Aladdin Back Cancel This is critical to launch the Moldplus Server If this is not running on your system Moldplus Server will give errors 2 2 Moldplus Server launch issues 2 2 1 Nethasp SIM number not displayed Ensure that the NetHASP SIM is connected to the computer and the NetHasp License Manager is installed and running Normally the NetHasp License Manager will launch upon startup before the Moldplus Server If it is running you will see a minimized icon on the right hand side of the toolbar close to your time display as follows A WARNING Configuring the Moldplus Server shoul
25. licenses from running if they are active Page 32 of 39 1 2 Moldplus Licenses Operation Normally when the number of Moldplus users arrives at the maximum number permitted by the license all new requests to use Moldplus will be refused until one person stops using Moldplus Each time a Moldplus license is open on one machine it is counted as another floating license being used Upon correctly leaving a Moldplus Level a license for this level is immediately and automatically released If the user is required to leave Moldplus due to a fatal error the license will be released after a maximum of 60 seconds 1 3 Moldplus Temporary Licenses Temporary licenses to try Moldplus products are normally provided for a period of 30 days Trouble shooting The following section refers to the installation issues and how to verify the proper settings and configuration For Windows Server editions please check the configuration section above The basic checks are Firewall Windows DEP settings and Antivirus software to ensure that the Moldplus Server properly launches 2 1 NetHasp License Manager not installed Problem Moldplus Server V5 0 Installation InstallShield Wizard The NetHASP License Manager was not installed on your system using the Mastercam installation OR LMSETUP EXE Please do the following after the Moldplus Server installation 1 Verify if the NetHasp Server application was installed 2 If it was not instal
26. ns List to give access to the Network Ensure that the NHSRVICE EXE MoldservManager exe MoldservService exe and MoldservDiagTool exe are added in the Windows Firewall Exceptions list after product installation Ensure that the Windows DEP DataExecutionSettings option is set to function for Essential Windows programs only During the installation process the installation will check to see if Visual Studio 2008 SP1 Redistributable package is installed If it is not installed it will launch the dialog to install this package This installation is included in the Moldplus Server install Moldplus Server will NOT FUNCTION WITH a regular HASP SIM Have the Moldplus products XML license file available to configure upon completion of Moldplus Server installation Your reseller should have provided you the XML license file that is related to your NETHASP SIM If all the above precautions have been taken the installation process and configuration should be smooth 14 When attempting to set up the server using a remote connection not being physically present at the Server station you will need to use a REMOTE CONSOLE connection and NOT a remote desktop connection Unless your remote connection can simulate a local presence at the computer such as ILo Remote connect software from HP you will not be able to successfully setup Moldplus Server The quickest indication that the install will not work is when the Mastercam NetHasp SIM O
27. ows Firewall General Exceptions Advanced Windows Firewall is helping to protect your PC Windows Firewall helps protect pour computer by preventing Unauthorized users from gaining access to your computer through the Internet or a network Y On recommended This setting blocks all outside sources from connecting to this computer with the exception of those selected on the Exceptions tab Don t allow exceptions Select this when you connect to public networks in less secure locations such as airports You will not be notified when Windows Firewall blocks programs Selections on the Exceptions tab will be ignored Y OFF not recommended Avoid using this setting Turning off windows Firewall may make this computer more vulnerable to viruses and intruders What else should know about Windows Firewall Cancel Click on the Exceptions tab and ensure that the following are included in the Firewall Exceptions list C WINDOWS SYSTEM32 NHSRVICE EXE C Program Files Aladdin HASP LM Moldplus Server MOLDSERVMANAGER EXE C Program Files Aladdin HASP LM Moldplus Server MOLDSERVSERVICE EXE C Program Files Aladdin HASP LM Moldplus Server MOLDSERVDIAGTOOL EXE Adding the 3 files to the EXCEPTIONS list will ensure that these products have access to the network Performing the above checks should ensure that the SIM is identified through the Moldplus Server In many cases overcoming this hurdle is the biggest step
28. perTrim Moldplus 5axiskit Moldplus CATIA V5 Read Moldplus CATIA V5 Read Solids Moldplus CATIA V4 Read Moldplus CATIA V4 Write Moldplus CATIA V4 Solids Moldplus CATIA V5 FTA GDT Date Mon Dec 31 2012 Mon Dec 31 2012 Mon Dec 31 2012 Mon Dec 31 2012 Mon Dec 31 2012 Mon Dec 31 2012 Mon Dec 31 2012 Mon Dec 31 2012 Mon Dec 31 2012 Mon Dec 31 2012 S S 5 5 5 5 5 5 35 5 So Gc 50 9 1251 5 9 1256 Page 29 of 39 Serial Number The Mastercam Nethasp SIM number is displayed as the Serial Number If a serial number of 0 is displayed refer to the SIM not found section of this document to ensure that Moldplus Server can access the Mastercam SIM IP to use The Moldplus Server functions properly by the use of an IP address pre assigned or user configured If there is more than 1 IP address on the system you will be allowed to choose the relevant IP address to use with Moldplus Server The IP address is the same as the one used by the Hasp License Manager Port The communication of the license is effected by the UDP ports which are defined by default for each machine server 897 You can modify the UDP ports if there are conflicts with another application Allows you to select the Moldplus Server XML license file to register the licenses You have to use this button to properly register the XML license file This file is provided by your Mastercam reseller to configure all your Moldplus product licenses
29. s The Moldplus Server product is installed to the following location Windows 7 64 example Ko bi CAProgram Files x86 Aladdin HASP LM Moldplus Server 5 9 Organize Include in library Share with Burn New folder AZ Mame Date modified Type SIZE Ez Desktop di imageformats 03 Feb 12 5 34 PM File folder de Downloads Tt Moldplus_Server_Help pdt 28 Jan 126 53 PM Adobe Acrobat D 1 882 KB de Dropbox Moldsery_Changelog html 31 Jan 12 2 07 PM Firefox Document 2 KB E Recent Places moldserva dil 17 Dec 10 3 33PM Application extens 104 KE moldservb dll 17 Dec 10 3 33 PM Application extens 460 KE Libraries amp moldserve dll 19 Oct 10 3 22 PM Application extens 451 KB ES Documents MoldservDiagTool exe 31 Jan 12 4 33 PM Application 198 KB a Music MoldservManager exe 31 Jan 12434PM Application 467 KB Pictures ln MoldservService exe 31 Jan 12 4 34 PM Application 152 KB BE Videos OtCore4 dll 28 Dec 103 12 PM Application extens 2 230 KB S OtGuiddll 03 Novw 10 3 14 AM Application extens 1 976 KB e Homegroup S OtNetwork4 dll 03 Novw 10 3 00 AM Application extens 893 KB S Qt5wg4 dil 03 Mov 10 3 30 AM Application extens 2 0 KB Computer Otaml4 dll 03 Nov 10 2 58 AM Application extens 332 KB The Additional Files is installed to the following location Windows 7 64 example A 4 TO 7 E gt di C Program Files 86h Aladdin HASP LM Additional Files Organize Include in library Share with
30. ss 168 1 129 Port Number 897 ers Leaving the IP address as zero will automatically search the Moldsery FOUND system for the correct IP address This could take some time Cancel You can click on Search to have ProDrill automatically search for the IP address Once you enter the correct IP address the data will be stored in the prodrill ini file under the SHARED MCAMX5 PRODRILL_Vx folder This dialog can also be accessed from the ProDrill menu by clicking on the Parameters button and clicking on License Rights Once the codes are configured you will be able to use the licenses up to the maximum allowed on the Moldplus Server Once you have configured the relevant products for use you can start using the products Page 27 of 39 XML License File details 1 The e crie button from the Moldplus Server dialog will display the XML license file using the default Internet Explorer found on your system Note that editing any of the XML file s contents OR changing the file name prefix from M will result in an invalid license file lt xml version 1 0 encoding IS0 8859 1 7 gt lt l Use a standard compliant web browser to view this file ae lt l This license file is generated by Moldplus JA for the products mentioned below gt lt l Moldplus JA website wwe moldplus com email infofmoldplus com gt lt l This is an automatically generated file do NOT edit gt lt l ALI dat
31. t Moldplus products licensed Level Id Moldplus product reference ID number Level Name The name of any Moldplus or other 3 party product that is licensed and controlled using the Moldplus Server Date This date indicates the maintenance expiration date for any given Moldplus product As long as the maintenance date has not expired the client can always use the latest releases and versions provided by Moldplus SA If the date has expired only functionality prior to the Maintenance expiry date Page 31 of 39 will be active within a 12 month period Moldplus temporary licenses are also displayed in the same field Type Type of code either Maintenance Temporary or Educational Used Seats The number of licenses of the listed products that are actively being used by a client at any given time Seats The total number of registered licenses for the listed product Start Server This button installs the Moldplus Service and launches the Moldplus Server licenses for immediate use of the product Stop Server This button will stop the Moldplus Server AND remove the Moldplus Windows Service This button allows you to view the provided XML license using the default Internet browser View Log File View the Log history for the Moldplus Server using Windows notepad Help Open this PDF help document Close This button will close the Moldplus Server Manager dialog Closing this dialog will not stop the
32. ure that idle licenses are freed up before attempting to launch Moldplus again 2 3 3 Moldplus Server connect errors When you encounter a long delay in connecting to a server or a fatal error such as the following dialog there is a chance that the configuration file on the client system is corrupt does not exist OR Moldplus Server Manager is not running Moldserv fatal error E4 Moldserv fatal error E4 Please report Please report Case 715 Case 210 Error 10054 Error 0 Moldplus DLL ProDrill DLL and CATREAD5X DLL will automatically attempt to connect with the new settings of the Moldplus Server and configure themselves automatically to the new values Page 38 of 39 If they fail then you will need to configure them manually Note down the IP address and the Port number on the Moldplus Server and then configure the relevant products manually Verify the Moldplus product configuration section for more details on this Conclusion We hope you found this document useful to help configure Moldplus Server 5 2 seamlessly and with minimal effort Questions or feedback please email support moldplus com Moldplus Server is developed with open source software Licenses for all open source software components are available in the file Open Source Software Licenses docx which is provided with this installation Thank you Moldplus SA Revision date February 03 2012 Page 39 of 39
Download Pdf Manuals
Related Search