User Guide and Usage Restrictions of GLO PRP Ⅰ
Contents
1. 1900g time 6min and turn on the centrifuge 15 Connect the plunger with the GLO PRP body and carefully separate cap from the GLO PRP body 7 Extraction 16 Put syringe coupler into the GLO PRP body 17 Connect 1ml syringe with syringe coupler 18 PRP can take into 1m syringe by pushing down the plunger 19 Photograph of the concentrated PRP in 1ml syringe II Usage restrictions 1 The practitioner is to be thoroughly familiar with the equipment and the procedure prior to using the product 2 The patient is to be made aware of general risks associated with treatment 3 PRP and Platelet Poor Plasma PPP concentrates are to be prepared from fresh blood and used rapidly 4 The product cannot be used to other dosing or application 5 Single use device do not reuse to prevent contamination and infections 6 Do storage at room temperature away from high temperature high humidity and direct sunlight 7 Do not disassemble repair or modify the product 8 Sterility guaranteed unless package has been opened or damaged 9 The expiration date is 3 years from sterilizing date 10 The scale mark is within tolerance 1 5ml 5 10ml 4 In case of more accurate injection use other method2. User Guide and Usage Restrictions of GLO PRP I User guide 1 Blood collection 1 Fill 1 5m ACD A or sodium citrate anticoagulant into the GLO PRP body 2 Take 8 5m2 blood from patient by using scalp vein set 2 PRP Kit combination 3 Put RBC tube into the GLO PRP body 4 Remove the plunger of the GLO PRP body by turning it counterclockwise 5 Invert the GLO PRP gently several times 3 First Centrifugation 6 By pressing the RPM RCF button in the control panel of the centrifuge configure the state in RCF motion and set for 1800g 7 By pressing the time button set for 3 minutes 8 Insert the GLO PRP kit body in the centrifuge and press on the button of Start stop for the centrifugal filtration But when you use 1 or 3 GLO PRP kit in order to balance the weight difference insert the kit of the same weight in the diagonal position 4 PRP kit separation 9 Connect the plunger with the GLO PRP body and push up the plunger for pressure release 10 Carefully separate RBC tube from the GLO PRP body 5 Discharge red blood cell RBC l J s 11 Discharge RBC remained in the GLO PRP body until Oml line by pushing down the plunger 12 Put the GLO PRP kit body upside down and discharge the inner air 13 Plug the GLO PRP body with cap 6 Second Centrifugation 14 Insert the GLO PRP body in the centrifuge and set the condition of the centrifuge RCF
Download Pdf Manuals
Related Search