USER MANUAL GEBRAUCHSANLEITUNG MANUEL D
Contents
1. temperature Plash 24082 24083 24081 code Glass Dome 24918 TRANSPARENT Glass Dome 24919 FORSTED light Standard configuration 300 W 230 V Halogen GX 6 35 23022 in light Standard configuration 300 W 110 V Halogen GX 6 35 23030 Modelling lamp All models on off Intelligent Fan Fan speed is electronically temperature controlled The overheat Cooling protection shuts down the Halogen lamp at higher internal temperature after cooling down the Halogen lamp switches on automatically Included extras 5 m Flash Cable Glass Dome transparent Plug In Flash Tube Halogen Lamp ZOOM Function Umbrella Support Reflector Locking Bayonet Tripod adaption Standard 5 8 Dimensions L x 245 x 155 x 205 with protective cover 240 x 155 x 205 with glass WxH cm dome Weight 23 2 33 23 Order Code 20192 20193 20191 11 User Manual E REFLECTOR ZOOM TABLE REFLECTOR 0 Reflector 18 cm 60 Reflector 21 cm 50 Reflector 26 cm 43 None MEET Hot spot Z00M FLASHHEADS MODELLING LAMPS FUSES MOD LAMP SOCKET Gx 6 35 POWER 150W 200W 300W 150W 200W 300W VOLTAGE 230VAC 230VAC 230VAC 120VAC 120VAC 120VAC EL NR 23032 23034 23022 23081 23033 23030 Wide FUSES REACTION FAST F FAST F FAST F FAST F FAST F FAST F WIDE 81 74 63 53 EL NR 10 PCS 19032 19032 19033 19032 192. OUTDOORS STUDIO amp GENERAL USE ZOOM Action ZOOM Pro Flash heads are powerful light sources Please be aware of the danger or inconvenience that they may present to others such as example children e Keep flash units out of reach of unauthorised persons whenever possible e Donot use in restricted areas like hospitals always ask permission before e Do not use near flammable explosive material Keep minimum 1m distance or more e Always switch off the power pack before connecting or disconnecting heads User Manual The unit the flash tube and accessories may become very hot during and after use To avoid injuries handle with isolating cloth or wait until parts have cooled down Never flash into the eyes of a subject without warning Close use may affect eyesight There is high voltage and there can be high currents so please apply all the usual safety precautions when handling the unit Protect the flashhead and the power pack when used in humid conditions but ensure ventilation for cooling Flash cables must be connected correctly before switching on the power pack Acclimatizing If the unit has been exposed to very cold conditions sudden exposure to warm or humid air may cause condensation and malfunction Prevent direct sunlight which might heat up the head and the power pack Do not open the unit In the event of damage apparent failure or a defect flash tube please contact the
3. d faut de fabrication ou de composants apparu dans un d lai de 24 mois partir de la date d achat L appareil doit tre envoy d s que possible l adresse du vendeur ou de l agent ELINCHROM autoris Cette garantie n est plus valable pour les appareils soumis un usage non appropri d mont s modifi s ou r par s par des personnes n appartenant pas au r seau de distribution ELINCHROM Sont exclus de cette garantie les tubes clairs les lampes pilotes et le vieillissement des condensateurs ELINCHROM n est pas responsable de dommages r sultant d un fonctionnemement d fectueux de l appareil perte de film manque gagner ou autres frais Questo prodotto ELINCHROM sar riparato gratuitamente da un agente della casa produttrice se durante un periodo di 24 mesi dalla data dell acquisto il suo funzionamento danneggiato da un difetto di fabbricazione o di materiale Il prodotto difettoso dovr essere inviato immediatamente a un centro autorizzato o ad un rappresentante ELINCHROM Questa garanzia non si applica ad apparecchiature usate in modo non conforme che sono state smontate su cui hanno operato o che sono state riparate da personale non appartenente alla rete di distribuzione ELINCHROM Parimenti essa non copre lampadine per flash lampade e il normale ammortamento dei condensatori Non ci si assume la responsabilit di danni derivanti da un funzionamento insoddisfacente dell apparecchio come pellicole rovinate o spese similar
4. e NEW Protection glass dome included e Halogen lamp on off switch e Centred umbrella fitting 7 mm e Extra umbrella fitting for other umbrella shaft sizes e NEW Intelligent low noise fan cooling system Electronically controlled the fan spins slower or faster depending on the internal temperature of the head e Large handle with rubber grip e Small robust and lightweight housing User Manual E Z00M HEAD VERSIONS ZOOM PRO HD 20192 The ZOOM PRO HD version offers a high performance plug in flash tube with heavy duty electrodes for maximum colour stability and hard use in digital photography The ZOOM PRO HD is the best choice for catalogue and 3D turntable imaging Maximum 50 serial flashes at 3000 ws after this a short break of some minutes is required to not damage the flash tube electrodes Z00M ACTION 20193 The ZOOM ACTION Head offers a very short flash duration for action freezing photography The new A action tube is a single twin pole plug in flash tube with even light distribution Maximum 20 serial flashes at 3000 ws after this a short break of some minutes is required to not damage the flash tube electrodes ZOOM PRO 20191 This Head is designed for universal photography and is equipped with a standard 3000 ws omega plug in flash tube Maximum 20 serial flashes at 3000 ws after this a short break of some minutes is required to not damage the flash tube electrodes USER SAFETY INFORMATION
5. same equipment will continue to comply with the Commissions requirements CE MARKING The shipped version of this device complies with the requirements of EMC directives EMC 2004 108 EC Electromagnetic compatibility and Low voltage v 2006 95 EC Low voltage directive User Manual DISPOSAL AND RECYCLING This device has been manufactured to the highest standards from materials which can be recycled or disposed of in a manner that is not environmentally damaging The device may be taken back after use to be recycled provided that it is returned in a condition that is the result of normal use Any components not reclaimable will be disposed of in an environmentally acceptable manner If you have any question on disposal please contact your local office or your local ELINCHROM Agent please visit our website for a list of all ELINCHROM agents worldwide CHARACTERISTICS e Three versions ZOOM PRO HD ZOOM ACTION and ZOOM PRO e NEW ZOOM function for flash tube and halogen modelling lamp e The ZOOM function is available from the left and right housing side e ZOOM angle 50 to 66 with 21 cm Reflector 26141 e Upto 3000 ws maximum flash power for the ELINCHROM power pack range e Upto 300 W halogen modelling lamp e High quality 5 m flash cable for maximum power and flexibility also available as Flashhead Extension cable in 5 m and 10 m e NEW Reliable high quality plug in flash tube included
6. 032 19036 User Manual MAINTENANCE The Zoom Head requires only very little maintenance To ensure secure operation please check the following points regularly before connecting the Zoom Head to the EL power pack e Ensure that the contacts of the flash head connector are not burned or corroded e The Zoom Head flash cable should not have any marks or cuts LIFE DANGER e Ensure that the plug in flash tube the Halogen lamp and the glass dome are correctly fitted e Donot use water to clean the Zoom Head from dust and dirt e Ventilation grids must be clean and free of any tape etc e When the Zoom Head is connected to the EL power pack check that the fan cooling is active CAUTION Under no circumstances open any part of the equipment The Zoom Head is not user serviceable and there is dangerous high voltage In the event of difficulties contact your Elinchrom Service partner Regular check National safety regulations require frequent safety checks of the electrical equipment The ZOOM Head should be checked once a year This check not only guarantees safety it also protects the value of the unit Return To Customer Service To achieve maximum protection of the unit when sending it in for service the original packaging should be kept Sales Service Rental For service and sales please contact your local Elinchrom Distributor For more information contact and support please visit http www elinchrom ch dist
7. E3 elnchrom creative image lighting technology is a registered trademark of ELINCHROM LTD RENENS SWITZERLAND USER MANUAL GEBRAUCHSANLEITUNG MANUEL D UTILISATION MANUALE D USO MANUAL DE INSTRUCCIONES ZOOM Pro HD 20102 ZOOM Action 2019 ZOOM Pro 2019 Elinchrom SA ZOOM Head Made in Switzerland 12 07 2011 73012 User Manual Table of contents Introduction Declaration of conformity CE Disposal Characteristics User Safety Information Before You Start Replacing the Plug In Flash Tube ZOOM Head Accessories Technical Data Maintenance Warranty on a F A Q 10 1 12 62 User Manual INTRODUCTION Dear photographer Thank you for buying the ELINCHROM ZOOM FLASHHEAD for the ELINCHROM power pack range All Elinchrom products are manufactured using the most advanced technology Carefully selected components are used to ensure the highest quality and the equipment is submitted to many tests both during and after manufacture We trust that it will give you many years of reliable service Please read the instructions carefully before use for your safety and to obtain maximum benefit from the many features Your Elinchrom Team Please read carefully the notes about this manual This manual may show images of products with accessories which are not part of Sets or single units Elinchrom set and single unit configurations may change without advise and may differ in other c
8. Elinchrom Service Centre Flash tubes and modelling lamps may generate high pressure during operation Explosions may occur with aged flash tubes and incorrect fuse halogen lamp combinations For this reason the flash tube is covered with a glass dome In case of a damaged flash tube or a broken security cover the flashhead must be immediately unplugged from the power pack and sent to an authorized Elinchrom customer service Only lamp connectors with immaculate contacts must be used burned or and corroded contacts may cause explosions in the area of connectors and lamp sockets Do not route cables across the studio floor if possible so that damage is prevented If routing across the studio floor cannot be avoided then it must be ensured that vehicles ladders etc do not damage cables Damaged cables and cases must be immediately replaced by customer service User Manual BEFORE YOU START e Ensure that the power pack is switched OFF before connecting the ZOOM Head e Ensure that the ZOOM Head is in a workable condition Do not use the ZOOM Head if the connector cable flash tube fan or the housing show any kind of damage e Connect the flash head connector to the power pack e Only correct fitted flash cable connections are secured against arching e Check all connections again and than switch on the unit ATTENTION e Always switch off the power pack before connecting or disconnecting flashheads e The ambient
9. TTING ACCESSORIES Always switch the unit off before attaching accessories Disconnect the flash cable from the power pack Mount the ZOOM Head to a tripod and lock the security screw Turn the locking ring of the reflector bayonet anticlockwise in OPEN position Insert an accessory and turn clockwise until you hear it click into place oa lt Turn the locking ring clockwise to close the bayonet indicated by the white mark on the bayonet ring Check if the Reflector is well fitted Reconnect the flash cable to the power pack and switch the unit on ZOOM HEAD ACCESSORIES FLASH TUBES ZOOM PRO HD 24082 ZOOM ACTION 24083 ZOOM PRO 24081 HALOGEN LAMPS MAX 300 W 230 V Halogen GX 6 35 23022 MAX 300 W 110 V Halogen GX 6 35 23030 GLASS DOMES Glass Dome transparent standard configuration 24918 Glass Dome frosted 24919 ZOOM HEAD EXTENSION CABLE 5m 21040 10 m 21041 User Manual TECHNICAL DATA ZOOM FLASHHEAD ZOOM PRO HD ZOOM ACTION ZOOM PRO Max flash power 3000 ws J load Compatible All Elinchrom power packs since 1981 power packs Multi voltage All Zoom Heads can be used with 110 V or 230 V EL power packs Only the Halogen lamp and the fuse must apply to the correct voltages and values Plug in flash tube E Super short flash Quartz Heavy Duty duration Quartz Standard colo 5500 K at full flash power
10. Vi preghiamo di far pervenire questa cartolina di iscrizione direttamente a CH 1020 Renens Por favor env e esta tarjeta de registro directamente a Switzerland Elinchrom model N Elinchrom Modell Elinchrom mod le Modello di Elinchrom Modelo de Elinchrom Date of purchase E Dealer i Kaufdatum Handler La date d achat p N gociant i i La data di acquisto E Il distributore La fecha de la compra El comerciante i Your full name and address Name und Adresse Votre nom complet et adresse Il suo nome pieno ed indirizza Su nombre completo y direcci n elnchrom creative image lighting technology Elinchrom SA ZOOM Head Made in Switzerland 12 07 2011 73012
11. i Este aparato ELINCHROM ser reparado gratuitamente por el vendedor en caso de mal funcionamiento imputable a un defecto de fabricaci n o de material surgido durante los 24 meses siguientes a la fecha de compra El aparato detectuoso deber ser enviado r pidamente al comerciante o al agente ELINCHROM Esta garant a no es v lida para los aparatos sometidos a un uso anormal desmontados modificados a reparados por personas que no pertenecen a la red de distribuci n ELINCHROM Esta garant a no incluye los tubos de destello los capacitores y el envejecimiento normal de las bombillas de luz de modelado as como tambi n cualquier da o que pueda resultar del funcionamiento defectuoso del aparato p rdida de film gastos de desplazamiento p rdida de ganancias etc Please register your Elinchrom product online under Bitte registrieren Sie ihr Elinchrom Produkt unter Veuillez enregistrer votre produit Elinchrom on line sous Per favore registrare il suo prodotto Elinchrom in linea sul sito Por favor registre su producto Elinchrom por internet www elinchrom com SUPPORT LOGIN In case you cannot register your Elinchrom unit via internet please fill in the Guarantee card and post it to ELINCHROM Please return this registration card directly to ELINCHROM S A Diese Registrierkarte bitte direkt zuricksenden an 80 Box 458 Veuillez retourner cette carte d enregistrement directement a Avenue de Longemalle 11
12. on Use protective gloves if the glass dome the Halogen lamp or the flash tube must be replaced ON e Set the ZOOM focus to max wide angle front position e Remove firmly the glass dome from the metal snap in hooks e Remove the security spring from the flash tube and pull the flash tube firmly out of the terminals e fthe tube is broken use safety gloves Avoid cutting yourself e Never touch the metal electrodes and ensure that the unit is discharged and disconnected from the EL power pack Use an insulated tool to pull out the electrodes 6 Now set the ZOOM focus to the max hotspot rear position and replace with a new correct original Elinchrom flash tube NOTE Check the correct polarisation when Action A type flashtubes are f replaced They normally fit only in one E direction e ZOOM PRO HD Head flash tube E j code N 24082 x e ZOOM ACTION Head flash tube code N 24083 e ZOOM PRO Head flash tube code N 24081 7 A glove or plastic protection MUST BE USED Contact with your fingers on the glass causes dark markings on the flash tube when it is used 8 Check that the tube is correctly aligned central and that the trigger contact is gripping the tube 9 Fitthe glass dome carefully into the snap in metal supports 10 Check that the correct fuses are used for the Halogen lamp 11 Re connect the ZOOM Head to the power pack and test the unit as usual 10 User Manual FI
13. ountries Please find actual configurations at www elinchrom com For further details upgrades news and the latest information about the Elinchrom System please regularly visit the Elinchrom website The latest user guides and technical specifications can be downloaded in the Support area Technical data features and functions of Elinchrom flash units accessories and the EL Skyport system may change without advice The listed values can differ due to tolerances in components or measuring instruments Technical data subject to change No guarantee for misprints User Manual DECLARATION OF CONFORMITY This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions This device may not cause harmful interference 1 This device must accept any interference received including interference that may cause undesired operation Product name ZOOM HEAD Trade name ELINCHROM Model number s Pro HD 20192 Action 20193 Pro 20191 Name of responsible party Elinchrom S A Av De Longemalle 11 CH 1020 Renens Switzerland Phone 41 21 637 26 77 Fax 41 21 637 26 81 E Mail elinchromOelinchrom ch ELINCHROM S A hereby declares that the equipment bearing the trade name and model number specified above was tested conforming to the applicable FCC rules and that all the necessary steps have been taken and are in force to assure that the production units of the
14. rib php 13 62 Warranty This ELINCHROM product will be repaired free of charge by the vending agent if during a period of 24 months from date of purchase its working order is impaired through a manufacturing or material defect The faulty product should be immediately sent to the authorized dealer or ELINCHROM agent This guarantee is not valid for equipment which has been misused dismantled modified or repaired by persons not belonging to the ELINCHROM distribution network It does not cover flash tubes lamps and the normal ageing of capacitors No responsibilities can be accepted for damage resulting from unsatisfactory operation of the equipment such as wasted film or other expenses Dieses ELINCHROM Produkt wird durch den Verkaufer des Ger tes kostenlos repariert falls sich innerhalb von 24 Monaten ab Verkaufsdatum durch Fabrikations oder Materialfehler verursachte Mangel auftreten Senden Sie das Ger t sofort an den zustandigen Handler oder ELINCHROM Vertreter Der Garantieanspruch entf llt wenn das Ger t unsachgem ss behandelt oder durch unberechtigte Personen demontiert umgebaut oder repariert wurde Ausgeschlossen von dieser Garantie sind Blitzrohren Lampen das normale Altern von Kondensatoren sowie Schaden die durch ein defektes Ger t entstehen k nnten z B Filmverlust Reise und andere Kosten Cet appareil ELINCHROM sera gratuitement remis en tat par son vendeur en cas de mauvais fonctionnement imputable a un
15. temperature whilst the unit is in use min 20 C 4 F up to max 35 C 95 F THIRD PARTY MANUFACTURERS The ZOOM flashhead cannot be connected to power packs from other brands Even when similar flashhead sockets and plugs are used by other manufacturers the wiring of the contacts and the flash tubes are specifically made for Elinchrom power packs Use only original Elinchrom accessories and reflectors The warranty does not cover damages forced by third party accessories and reflectors ZOOM HEAD ON OFF SWITCH The Halogen modelling lamp can be switched on off directly from the ZOOM Head if this is required It does not switch off the flash light ZOOM HEAD INTELLIGENT FAN COOLING AND OVERHEAT PROTECTION The fan speed is electronically controlled Close to the on off switch is a small LED which lights up in case of over heating The overheat protection shuts down the Halogen lamp at internal high temperature After cooling down the Halogen lamp switches on automatically and the red LED turns off User Manual REPLACING THE PLUG IN FLASH TUBE Elinchrom uses high quality long life plug in flash tubes specifically made for the ZOOM Heads To exchange a user replaceable plug in flash tube please follow the instructions below 1 Switch the EL power pack OFF Disconnect the flash cable connector first from the power pack Place the ZOOM Head on a dry and clean surface Wait until the ZOOM Head has cooled down Attenti
Download Pdf Manuals
Related Search