Quick Start User Guide
Contents
1. G YOUR BATTERIES DEEP CYCLE DISCHARGING When the SPC4000 is in DEEP CYCLE MODE the DC FAN will turn ON automatically If the SPC4000 is over 40C the DC FAN will turn ON automatically Once the SPC4000 is below 35C the DC FAN will turn OFF automatically FINAL NOTE You can CHARGE and DEEP CYCLE 4 DJI Smart Batteries plus CHARGE your WIFI EXTENDER and iPHONE simultaneously OTHER INFORMATION ABOUT THE SPC4000 AUTOMATIC THERMAL FAN CONTROL When the SPC4000 power supply output is less than 8 4v or greater than 13 7v the charger s LED s will all flash at the same time thus turning OFF CHARGE MODE AUTOMATICALLY This is to protect the battery and the charger Please REMOVE the power cord and check battery to see if there is a circuit short or damage Hold Down Remove Battery CHARGING YOUR iPHONE or iPAD 1 Turn ON the SPC4000 5 Turn OFF the SCP4000 2 Connect your iPHONE or iPAD to the USB port using the ca ble supplied by APPLE 3 When your iPHONE or iPAD shows 100 it is fully charged 4 Remove the cable from the SPC4000 3 When both LED s on the WIFI Extender are GREEN it is fully charged 4 Remove the cable from the SPC4000 5 Turn OFF the SCP4000 LEDs 5 When the battery s GREEN LED s are OFF the battery has been DEEP CYCLED and charged to full capacity 2 Hold down the RED DEEP CYCLE BUTTON until the LED turns RED 3 The SPC4000 will activate the battery2. a b LED Indicators Insert Battery Quick Start User Guide Before using your Smart PowerCharger be sure to read this guide along with safety precautions Familiarize yourself with how to use the charger properly For future reference keep this guide handy SPC4000 4 The charger s LED s indicators on top of the unit will cycle from RED to Green Once the LED s are static Green the unit is in CHARGE MODE 1 Unpack the charger and place in a DRY area for operation 2 Connect the POWER CORD to the side of the charger labeled AC Power Connection AC 100V 240V 3 Turn ON the Power Switch In your box a SPC4000 b Power Cord Note For extended life of your batteries it is recommended that you DEEP CYCLE your batteries following 5 to 10 flight cycles DEEP CYCLE your batteries when it is 30 capacity or below The best time to DEEP CYCLE your batteries is overnight 1 Insert the battery into the charging slot The SPC4000 will communicate with the battery and send the battery into CHARGE MODE automatically 3 Remove the battery and turn OFF the SPC4000 1 Insert the battery into the charging slot The SPC4000 will communicate with the battery and send the battery into CHARGE MODE automatically The battery s green LED will be blinking until fully charged 2 When the battery s green LED s are OFF it is fully charged QUICK START USER GUIDE CHARGIN
3. and discharge it to below 5 4 Once discharged to below 5 the SPC4000 will automatically send the battery into CHARGE MODE 6 Remove the bat tery and turn OFF the SPC4000 1 Turn ON the SPC4000 CHARGING YOUR WIFI EXTENDER 2 Connect your WIFI Extender to the USB port using the cable supplied by DJI
Download Pdf Manuals
Related Search