Operating instructions.
Contents
1. audio_ZA 1 6 de DE sabbaeu www Smart com 2008 11 10T16 21 39 01 00 Seite 26 Version 2 11 4 m TEAN g o H g N SE Ka D e KE S bo Be Spe E a g v 53 P ei O 833 OH e ke mm 7 2 We LQ lt H smart eine Marke der Daimler AG2. The sound settings can be adjusted individually for FM radio mode AM radio mode CD mode and AUX mode The sound settings are automatically stored every time you change them The bass and treble settings allow you to adjust the intensity of the sound according to the type of music being played The balance settings allow you to adjust the stereo sound to the left or right within the vehicle In the default setting the balance is set to the center of the vehicle b gt audio_ZA 1 6 de DE sabbaeu 2008 11 10T16 21 39 01 00 Seite 10 Version 2 11 4 Factory Settings If desired you can reset the sound settings to the factory settings sets all values to 0 Press and hold the BASS TREB button Bass and Treble Setting the bass gt Press the BASS TREB button repeatedly until the bass menu appears BASS U USE VOLUME KMOB P82 60 6679 31 gt To set the desired value 7 7 turn the control knob clockwise or anti clockwise gt To confirm the value and exit the menu press any button Setting the treble gt Press the BASS TREB button repeatedly until the treble menu appears TREBLE 0 USE MOL UE KEHOE P82 60 6680 31 gt To set the desired value 7 7 turn the control knob clockwise or anti clockwise gt To confirm the value and exit the menu press any button Balance Setting the balance gt Press the BAL button The balance menu appears B
3. pressing the or WE arrow button one or more times The set volume applies to both radio mode and CD mode gt To raise the volume turn the control knob clockwise gt To lower the volume turn the control knob anti clockwise If the loudness function is activated the volume of the lower and the higher audio frequencies is increased relative to the volume of the mid range frequencies The sound experience is thus intensified especially when playing back music at comparatively low volumes This function is only available in FM radio mode and in CD mode The function is not active during traffic announcements gt Press the MENU button gt Press the or GY arrow button repeatedly until the menu for activating deactivating the loudness function appears LOUDNESS ON USE VOLUME KNOB P82 60 6677 31 2008 11 10T16 21 39 01 00 Seite 9 Version 2 11 4 gt To activate deactivate the loudness function turn the control knob clockwise or anti clockwise gt To store the setting press the control knob When in radio mode the mute function mutes the radio In CD mode the mute function pauses the CD Switching on Mute gt Press the MUTE button The radio is muted or the CD is paused MUTE appears in the display 104 30 P82 60 6661 31 D Mute function ist activated Switching off mute gt Press the MUTE button again Mute is deactivated or the CD reverts to playback
4. The station scan is available in all wavebands Searches are always performed forwards audio_ZA 1 6 de DE sabbaeu gt Set the desired waveband gt To start the station scan press the SCAN button The station scan starts e The station scan plays every station identified for approximately eight seconds and stops once it has reached the station set before the scan was started e Tf the end of the waveband is reached the scan continues at the beginning of the waveband gt To stop the station scan press the SCAN button If you stop the station scan before it has found a new station the radio sets the last station identified Tuning in Stations Manually You can tune in manually in all wavebands Set the desired waveband gt Press and hold the EJ or WO arrow button Manual tuning is selected and the frequency changes in the desired direction gt Release the button when the desired frequency has been reached gt Fine tuning by increments press the ER BG arrow button briefly several times Tuning in a Station via the Station Pre Sets gt Select the desired pre set group EMT FM2 AM1 or AM2 gt Press one of the number keys 1 6 The radio tunes in to the station stored under the selected pre set 2008 11 10T16 21 39 01 00 Seite 13 Version 2 11 4 Storing a Station Fach pre set group FM1 FM2 AM1 AM2 provides six pre sets The following options allow yo
5. When another function is active e g CD mode press the SRC button repeatedly until the radio menu appears The radio switches to radio mode You will hear the last station selected The following wavebands are available e FM waveband stereo 87 7 107 9 MHz e AM waveband mono only 530 1710 kHz Each of these wavebands is provided with two pre set groups FM land FM 2 or AM 1 and AM 2 Each pre set group allows you to store up to six stations gt To select an FM pre set group press the FM button repeatedly until the desired pre set group appears The display cycles through the pre set groups FM land FM 2 gt To select an AM pre set group press the AM button repeatedly until the desired pre set group appears The display cycles through the pre set groups AM land AM 2 Stations may be tuned in the following ways e using the station search gt page 12 e using the station scan gt page 12 e manually gt page 13 e using the station pre sets gt page 13 Tuning in a Station Using the Station Search Function gt Set the desired waveband Press the SEEK button The station search starts and searches forwards e The search stops at the next station that can be received e If the end of the waveband is reached the search continues at the beginning of the waveband e If no station is found the search stops at the end of the waveband Tuning in a Station Using the Station Scan
6. harmful interference to radio communications Warning This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency RF Exposure Guidelines in Supplement C to OET65 This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation MPE But it is desirable that it should be installed and operated with at least 20 cm appr 8 inch and more between the radiator and person s body excluding extremities hands wrists feet and legs Warning Unqualified or unauthorized servicing of electronic components and software can cause operating faults The electronic systems are connected to a network using special interfaces Unauthorized modifications of this electronic system may also cause operating faults to other systems which have not been modified These operating faults can endanger the safety of your vehicle and its occupants audio_ZA 1 6 de DE sabbaeu SCHER ove io 8 DIDADA O Function Number buttons 1 6 In radio mode press briefly to selecta pre set station press and hold to store a station In CD mode select CD 1 6 from the CD changer CD slot EJECT button Ejecting CDs Display SRC button Selects an audio source radio CD Or AUX Page SCAN 2008 11 10T16 21 39 01 00 Seite 6 Version 2 11 4 Function FM button Pres
7. CDs e Only MP3 WMA files titles that were burned on a CD using ISO9660 Joliet file system can be played by the system e Recording media you have burned yourself in particular may cause read errors in rare cases even where the medium is recognized correctly in the normal way e Display of artist album and title name is limited to a maximum of 30 characters depending on which character set is used 2008 11 10T16 21 39 01 00 Seite 15 Version 2 11 4 e This equipment can play both write once CDs CD R and rewriteable CDs CD RW Multi session CDs should be finalized as otherwise playback problems can occur Multi session CDs that contain both audio tracks and MP3 WMA titles mixed mode are handled according to what is contained in the first session If the first session contains audio tracks the CD is treated as an audio CD In such cases any data stored inthe second session cannot be played Accordingly only MP3 WMA titles may be played back if this is what is contained in the first session The maximum number of folders per CD is 256 The maximum total number of folders and titles files onaCD is 512 When moving between folders and titles display and selection of these is linear Any existing hierarchical or nested folder structure is handled as a linear sequence Information regarding MP3 files e To display the title artist and album name you need to add the corresponding data to the MP3 f
8. confirm selection press the control knob The selected track ist played MP3 CD with folder structure gt During playback press the control knob The current folder is displayed gt To select a folder turn the control knob clockwise or anti clockwise to select a folder gt To confirm selection press the control knob The display switches to the selected folder and shows the first track audio_ZA 1 6 de DE sabbaeu 2008 11 10T16 21 39 01 00 Seite 20 Version 2 11 4 Q TRACK 1H34AE ol 4E EDS MPS fc 07 O01 P82 60 6669 31 D First track 2 Folder 7 selected gt To select a track turn the control knob clockwise or anti clockwise to select a track gt To confirm selection press the control knob The selected track is played Fast forward rewind gt Press the WO arrow button to fast forward audibly or press the arrow button to rewind audibly gt To stop release the arrow button Repeating tracks gt Press the ER arrow button The current track is repeated If the track has not been running for more than two seconds the previous track will be played Repeating tracks using the REPEAT function The REPEAT function plays the current track over and over until it is deactivated Activating the REPEAT function gt Press the MENU button gt Press the EE or WO arrow button repeatedly until the REPEAT menu appears 4MEHLIT gt REPEHT OFF USE
9. hold the MENU button The second menu level is called up gt Press the or WE arrow button repeatedly until the AUX menu appears AUK OH USE MOL UE KEHOE P82 60 6683 31 To change the setting AUX ON OFF turn the control knob clockwise or anti clockwise To store the setting press the control knob 2008 11 10T16 21 39 01 00 Seite 11 Version 2 11 4 The RESET function resets all settings you have made for the smart radio 10 to the factory settings Press and hold the MENU button The second menu level is called up gt Press the EE or WO arrow button repeatedly until the RESET menu item appears MEHL RESET ON USE VOLUME KNOB P82 60 6684 31 gt To change setting RESET ON OFF turn the control knob clockwise or anti clockwise gt To confirm the setting press the control knob If you confirm RESET ON all menu settings of the radio will be reset to the factory settings audio_ZA 1 6 de DE sabbaeu 2008 11 10T16 21 39 01 00 Seite 12 Version 2 11 4 You can find information on the operating system and the basic operation of the smart radio10 in the sections Overview of controls gt page 6 and Basic functions gt page 8 Press the ON button The radio activates the last active function If the last active function was radio mode the radio menu will appear You will hear the last station selected P82 60 6662 31 gt
10. ALAHCE U USE MOL UE KEHOE P82 60 6682 31 gt To set the desired value 7 7 turn the control knob clockwise or anti clockwise gt To confirm the value and exit the menu press any button You can connect an external audio source audio AUX to the smart radio10 More information is available from any qualified specialist workshop e g asmart center or a smart service outlet You will find a permanently installed 3 5mm phone jack in the left of the glove compartment to which you can connect external audio equipment e g an MP3 player P82 60 6606 31 D Socket for connecting external audio equipment AUX jack Switching to AUX Mode From within radio or CD mode gt Press the SRC button repeatedly until AUX appears You will hear the external audio source if it is connected and switched to playback audio_ZA 1 6 de DE sabbaeu P82 60 6681 31 For information on the operation of the external audio source please read the operating instructions of the external equipment You can set the following in AUX mode e Volume gt page 9 e Balance gt page 10 e Bass and treble gt page 10 Activating deactivating AUX Mode If you do not wish to connect an external audio source you can deactivate AUX mode If you do so the smart radio10 will only switch between radio and CD mode when the SRC button is pressed You can reactivate the function at any time gt Press and
11. VOLUME EMODE P82 60 6704 31 gt To change setting REPEAT ON OFF turn the control knob clockwise or anticlockwise gt To confirm the setting press the control knob 1934H5 TIECT ERS REPEAT TRACE 01 P82 60 6668 31 Q REPEAT is activated Displaying CD text You can view information stored on the CD Activating the CD information display for audio CDs The following information can be displayed e CD TITLE name of the album track e CD ARTIST name of the artist With audio CD inserted and CD mode active gt Press the MENU button gt Press the ER or WO arrow button repeatedly until until the CD TEXT menu appears CD TEXT OFF USE VOLUME KEHOE P82 60 6706 31 gt To change setting CD TEXT ON OFF turn the control knob clockwise or anticlockwise gt To confirm the setting press the control knob If the CD contains the selected information it will be shown during playback instead of the track number If the CD does not contain the desired information the following will be shown temporarily in the display audio_ZA 1 6 de DE 2008 11 10T16 21 39 01 00 Seite 21 sabbaeu Version 2 11 4 P82 60 6707 31 Activating MP3 text display The following information can be displayed e MP3 ALBUM name of the folder e MP3 ARTIST name of the artist e MP3 TITLE name of the track With MP3 WMA CD inserted and CD mode active Press the MENU button
12. anged The display shows the SLOT EMPTY message SLOT EMPTY SELECT SLUT P82 60 6699 31 Playing tracks in random order The tracks on the CD are played back in random order For MP3 WMA CDs the tracks contained in the currently selected folder are played back in random order Switching on random playback gt Press the MENU button gt Press the EE or E arrow button repeatedly until the RANDOM menu appears EN DONDOM DFF USE VOLUME KEHOE P82 60 6700 31 gt To change setting RANDOM ON OFF turn the control knob clockwise or anticlockwise gt To confirm the setting press the control knob 193456 l ORT Cb2 Oreck P82 60 6666 31 D RANDOM is activated Selecting a track The following options allow you to select tracks directly audio_ZA 1 6 de DE sabbaeu e skip e scan e rapid search Skip gt Press one of the buttons 1 6 to select a CD gt To skip forwards press the Wel arrow button The next track on the CD is played or gt press the SEEK button For audio CDs The next track on the CD is played For MP3 CDs The first title in the next folder is played gt To skip backwards press the arrow button during the first two seconds of the current track The previous track on the CD is played If the current track has already been playing for more than two seconds it will be restarted Scan Scan mode plays each track for
13. around ten seconds It ends automatically at the track you were listening to before you started the scan You can also end the scan manually Starting scan mode gt Press one of the buttons 1 6 to select a CD Press the SCAN button The number of the current CD is displayed SCAN appears in the right of the display SCAN 1 2 5 1934H5 ol de EDJ P82 60 6667 31 D SCAN mode activated 2 Selected CD 5 2008 11 10T16 21 39 01 00 Seite 19 Version 2 11 4 Ending scan mode gt Press the SCAN button again The track that was playing when scanning was ended remains selected Rapid search The rapid search function is available for both audio CDs and for MP3 WMA CDs For audio CDs the function allows you to search for a specific track For MP3 WMA CDs the function allows searching for a specific folder as well as for a specific track Rapid search function for audio CDs gt During playback press the control knob The current track is displayed gt To select a track turn the control knob clockwise or anti clockwise The CD s other tracks are displayed gt To confirm selection press the control knob The selected track is played Rapid search function for MP3 WMA CDs MP3 CD without folder structure gt During playback press the control knob The current track is displayed gt To select a track turn the control knob clockwise or anti clockwise to select a title gt To
14. audio_ZA 1 6 de DE 2008 11 10T16 21 39 01 00 Seite 1 sabbaeu Version 2 11 4 gt gt Operating instructions smart radio 10 audio_ZA 1 6 de DE 2008 11 10T16 21 39 01 00 Seite 2 sabbaeu Version 2 11 4 Symbols Optional equipment optional A Warning Environmental note H Possible vehicle damage d Tip gt Instruction gt gt Continuation symbol gt page Page reference Display Message in the multi function display audio_ZA 1 6 de DE 2008 11 10T16 21 39 01 00 Seite 1 sabbaeu Version 2 11 4 Thank you for choosing this smart radio Before you drive off familiarize yourself with your car radio and read the Owner s Manual This will help you to obtain the maximum pleasure from your car radio and to avoid endangering yourself and others The equipment and functions of your car radio may vary according to model and equipment level in terms of descriptions and illustrations Items of optional equip ment are marked with an asterisk smart is constantly updating its car radios to the state of the art and therefore reser ves the right to introduce changes in design equipment and technical features at any time You cannot therefore base any claims on the data illustrations or descriptions in these operating instructions Please consult a smart center or a smart service outlet if you have any questions The Owner s Manual is an integral part of the vehicle For this reason you should en
15. ender the CD unplayable even if only some files on the CD do not fulfil the required standards Loading the CH changer Ejecting CDs Loading the CD changer The integrated CD changer can load up to six CDs You can decide in which slot the CDs are loaded and later you can play the CDs by pressing one of the number buttons Loading single CD gt Press the Load button SELECT SLOT appears in the display 1239456 SELECT SL COZ P82 60 6690 31 While the CD changer prepares loading CD MOVING appears for a moment in the display gt Press one of the 1 6 buttons to select a slot INSERT CD appears in the display 12749456 INSERT CD UF SELELT SLOT COZ P82 60 6691 31 rr you do not select a slot the CD will be loaded automatically in slot 1 gt Insert a CD into the CD slot with the printed side facing upwards The radio switches to CD mode The inserted CD is played The CD display appears and the loaded slot appear inverse Qu M1246 EDA TRACK OI P82 60 6663 31 D Slot 2 inverted or gt Press one of the 1 6 buttons to select a slot The display shows the CD MOVING message momentarily and then the message INSERT CD audio_ZA 1 6 de DE sabbaeu INSERT CH UR SELECT SLOT DDZ P82 60 6691 31 gt Insert a CD into the CD slot with the printed side facing upwards The radio switches to CD mode The inserted CD i
16. f the specifications illustrations or descriptions in these operating instructions Warranty for Accessories and Replacement Parts The smart marketing corporation grants a warranty of 24 months without distance limit for this accessory or replacement part The warranty conditions printed in the smart Service Manual are valid Warrantor is the marketing corporation in that country the accessories and replacement parts have been bought see table in the Service Manual Specified Normal Operation Dear User this device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions e This device may not cause harmful interference and e this device must accept any interference received including interference that may cause undesired operation H Change or modification not expressly approved by the party responsible for 2008 11 10T16 21 39 01 00 Seite 5 Version 2 11 4 compliance could void the user s authority to operate this equipment H This equipment has been tested and found to comply with the limits for the Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated ina commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause
17. gt Press the EE or arrow button repeatedly until the MP3 TEXT menu appears P82 60 6708 31 gt To change setting MP3 TEXT ON OFF turn the control knob clockwise or anticlockwise gt To confirm the setting press the control knob If the CD contains the selected information it will be shown during playback in written text P82 60 6670 31 D Name of the folder 2 Name of the track a Name of the artist audio_ZA 1 6 de DE 2008 11 10T16 21 39 01 00 Seite 22 sabbaeu Version 2 11 4 audio_ZA 1 6 de DE 2008 11 10T16 21 39 01 00 Seite 23 sabbaeu Version 2 11 4 audio_ZA 1 6 de DE 2008 11 10T16 21 39 01 00 Seite 24 sabbaeu Version 2 11 4 audio_ZA 1 6 de DE 2008 11 10T16 21 39 01 00 Seite 25 sabbaeu Version 2 11 4 Internet Further information about Mercedes Benz vehicles and about Daimler AG can be found on the following websites Further information about smart vehicles and about Daimler AG can be found on the following websites www mercedes benz com www smart com www daimler com Editorial office You are welcome to forward any queries or suggestions you may have regarding these operating instructions to the tech nical documentation team at the following address Daimler AG HPC R822 D 70546 Stuttgart Germany As at 25 09 2008 Not to be reprinted translated or other wise reproduced in whole or in part with out the written permission of Daimler AG
18. ile before burning ID3 tags When compressing MP3 data we recommend a constant bit rate of at least 160 kbit s Variable bit rates can result in the playback time shown being different to the actual playback time The file extension for MP3 files must be mp3 and must be separated from the filename bya full stop If any other file extension is used this will not be recognized by the equipment audio_ZA 1 6 de DE sabbaeu 2008 11 10T16 21 39 01 00 Seite 16 Version 2 11 4 Information regarding WMA files e To display the title artist and album name you need to add the corresponding metadata to the WMA file before burning e The file extension for WMA files must be wma and must be separated from the file name by a period If any other file extension is used this will not be recognized by the equipment A number of factors influence whether or not a WMA file can be played including e Sampling rate e Bit rate e Encoding process e Software used for the creation of the WMA files e Burn software e Other settings e g copy protection Digital Rights Management advanced audio format settings To create WMA files use only current standard software a sampling rate of 44 1 kHz and bit rates between 160 and 320 kbit s Do not use other settings such as lossless coding surround sound DRM copy protection etc Do not use compilationsthat contain WMA files with other settings as this may r
19. is interrupted by a traffic announcement you must repeat it Warning The installed CD drive is classified as a Class 1 laser product Do not open the casing There is a risk of exposure to invisible laser radiation if you open the casing or if the casing is faulty or damaged There are no parts in the radio which you can repair yourself For safety reasons only have any necessary maintenance work carried out by qualified aftersales technicians Warning Do the following only when the vehicle is stationary e inserting a disc e ejecting a disc There isarisk of being distracted from the road and traffic conditions if you insert or eject a disc while the vehicle is in motion 2008 11 10T16 21 39 01 00 Seite 14 Version 2 11 4 e CDs should always be handled with care to avoid any interference during playback e Protect CDs from scratches fingerprints and dust e Never write on CDs e CDs should be cleaned from time to time using a conventional cleaning cloth When cleaning CDs you should wipe in straight lines from the center outwards rather than in a circular motion e Always place CDs back into the CD case after use e Protect CDs from heat and direct sunlight e Only use circular CDs with a diameter of at least 12 cm e Do not use CD adapters H The CD drive is designed for CDs that conform to EN 60908 Therefore only discs with a maximum thickness of 1 3 mm can be used CDs thic
20. ker than this which contain data on both sides for example cannot be ejected once inserted and will damage the CD drive The CD drive may not be able to play audio CDs with copy protection in some cases Interference may occur during playback when playing CDs that are copied or copy protected There is a wide range of data carriers burn software and burners available It is therefore impossible to guarantee that the CD drive will be able to play all types of data carrier you have burned yourself When playing back CDs with more than 700 MB which you have burned yourself audio_ZA 1 6 de DE sabbaeu playback problems may occur CDs ofthis type do not conform to the currently applicable standards H Do not affix stickers or labels to data carriers These may become loose and damage the CD drive Notes on MP3 WMA operation The CD drive can play audio CDs and CDs with MP3 or WMA data mp3 MPEG1 Audio Layer 3 iS an audio data compression format susceptible to sound quality impairments The format can be created with numerous programs some of which are available free of charge WMA Windows Media Audio is another audio data compression format and is also susceptible to sound quality impairments It 1s a component of the Microsoft Windows platform and can be generated using the Windows Media Player for example The following points should be taken into account when using MP3 and WMA
21. ns CD tracks current track time etc Depending on the audio source this information may differ Details can be found in the individual sections Example radio operation 070 00 D P82 60 6659 31 OO Depending on the waveband and the pre set group selected the display shows either FM 1 FM 2 AM 1 or AM 2 2 Station number CG Station frequency Example CD mode TRACK Ee P82 60 6660 31 OO Track number 2 Content of CD changer CD slots containing a CD are indicated by inverse numbers In this case slot no 2 and 5 b gt audio_ZA 1 6 de DE sabbaeu 2008 11 10T16 21 39 01 00 Seite 8 Version 2 11 4 3 Track playback time GO CD in slot 2 is being played This section describes the basic functions and operation of the smart radio10 Further details on the radio and CD functions can be found in the sections Radio Mode gt page 12 and CD Mode gt page 14 Warning In order to avoid distraction which could lead to an accident the driver should enter system settings while the vehicle is ata standstill and operate the system only when permitted by road weather and traffic conditions Operate the radio only in such a manner as to allow you to retain full control of your vehicle in all traffic conditions Bear in mind that at a speed of just 30mph approximately 50km h your car covers a distance of 44 feet approximately 14m every second You can find an
22. overview of the smart radio10 s controls in the section Operating Elements gt page 6 Switchning on the smart radio 0 If the radio was on when the key was turned back in the ignition lock gt Turn the key to ACC or ON or gt Press the ON button The radio calls up the last active function Turn the keyto LOCK inthe ignition lock or Press the ON button Menu ASS gnment The menu button is assigned differently in the various operating modes The respective functions are described in detail inthe individual sections In Radio Mode In radio mode there are two menu levels The first menu level contains the following items LOUDNESS ON OFF gt page 9 The menu item in the first menu level can be called up by briefly pressing the MENU button The second menu level contains the following items e AUX ON OFF gt page 10 e RESET ON OFF gt page 11 The menu items in the second menu level can be called up by pressing and holding the MENU button for at least three seconds and pressing the or WO arrow button one or more times In CD Mode The following menu items can be called up in CD mode e RANDOM ON OFF gt page 18 e REPEAT ON OFF gt page 20 e CD TEXT ON OFF gt page 20 e LOUDNESS ON OFF gt page 9 e MP3 TEXT ON OFF gt page 21 The menu items in CD mode can be called up by briefly pressing the MENU button and audio_ZA 1 6 de DE sabbaeu
23. reviously active function Ejecting all CDs from the CD changer gt Press and hold the EJECT button The radio ecjets all CDs from the CD changer Playing back CDs In radio or AUX mode gt Press the SRC button repeatedly until the CD menu appears The radio switches to CD mode The inserted CD is played audio_ZA 1 6 de DE sabbaeu 193406 Ol dE OF P82 60 6664 31 TRACK 12 Display with audio CD inserted CO Audio CD MP3 CDs are indicated by the message MP3 on the left side If a folder structure is present on the MP3 CD the selected folder appears with the corresponding folder number 1934H amp l Digg CO2 ED TRACK 012 P82 60 6665 31 Display with MP3 WMA CD inserted D CD 2 with MP3 files 2 Folder with folder number If no CD is inserted in the CD drive the display shows the NO CD message 123455 H CD FRESS LOAD Cha P82 60 6697 31 The radio returns to the previously active function after approximately 2 seconds or gt Insert a CD into the CD slot The radio switches to CD mode The inserted CD is played The radio displays both MP3 and WMA data in the same way The display will show MP3 for both formats Select CD Example CD no 6 in the CD changer Press the button 6 You will hear the selected CD no 6 2008 11 10T16 21 39 01 00 Seite 18 Version 2 11 4 If you select a CD not available the CD is not ch
24. s briefly to select an FM pre set group FM1 or FM 2 Press and hold to start the Autostore function AM button Press briefly to select an AM pre set group AM1 or AM 2 Press and hold to start the Autostore function MUTE button Mutes playback P82 60 6658 31 Page 1 audio_ZA 1 6 de DE sabbaeu Function WE Arrow button In radio mode press and hold the button to manually search for a station forwards In CD mode skips to next track Press and hold the button to fast forward SEEK button In radio mode starts the station search In CD mode skips to next track SCAN button In radio mode starts the station scan In CD mode track scan Control knob Adjusts the volume In the menu view turn to change a setting press to store a setting EE Arrow button In radio mode press and hold the button to manually search fora station backwards In CD mode skips to the previous track Press and hold the button to rewind MENU button Press briefly to call up the first menu level Press and hold to call up the second menu level Page d 19 20 18 1 19 20 2008 11 10T16 21 39 01 00 Seite 7 Version 2 11 4 Function Page 5 BAL button Calls up the balance menu 10 BASS TREB button Calls up the bass treble menu 10 7 ON button Switches the radio on off 8 LOAD button Loading CDs 16 The display shows all the information concerning settings statio
25. st played The CD display appears and the loaded slots appears reverse D Kkgauer TRACK 0 Dirde Coz P82 60 6663 31 CO Slot 2 inverted Loading the CD changer completely gt Press and hold the Load button The display shows the CD MOVING message momentarily and following the message INSERT CD as en LOED ALL INSERT CD ERZ P82 60 6693 31 gt Insert six CDs into the CD slot one by one with the printed side facing upwards The radio draws in the CDs The CDs will be loaded sequential in the slots 1 6 The radio switches to CD mode and starts playing with CD 1 Alternatively you can select a CD while the display shows the INSERT CD message gt Press one of the 1 6 buttons to select a Slot The selected CD will be played after loading 2008 11 10T16 21 39 01 00 Seite 17 Version 2 11 4 Ejecting a CD Ejecting single CDs Press the EJECT button gt Press one of the 1 6 buttons to select a slot for ejecting a CD or gt Press and hold one of the 1 6 buttons to select a slot for ejecting a CD CD MOVING appears in the display 494565 CD MOVING EDZ P82 60 6694 31 gt The CD ist ejected REMOVE CD appears in the display REMOWE CD E P82 60 6698 31 gt Remove the CD from the slot If the CD is not removed from the slot within approximately ten seconds the radio will draw it in again If there is no longer a CD in the slot the radio switches to the p
26. sure it remains within the vehicle at all times and if you decide to sell the vehicle pass it on to the new owner The technical documentation team at Daimler AG wishes you safe and pleasant motoring audio_ZA 1 6 de DE 2008 11 10T16 21 39 01 00 Seite 2 sabbaeu Version 2 11 4 audio_ZA 1 6 de DE 2008 11 10T16 21 39 01 00 Seite 3 sabbaeu Version 2 11 4 audio_ZA 1 6 de DE 2008 11 10T16 21 39 01 00 Seite 4 sabbaeu Version 2 11 4 Operating Elements N Playing back CDs 17 ne Be I Ro EE a PA EEA A PE E 16 Radio mode CD MOIE eieiei egener deeg 14 E nn DIE naar 12 EE ee 20 Random Playback 18 Fast forward rewind 2 22 20 Reser 11 Handling CDs ne 14 MP3 text 1 C Rapid search function 19 Repeat Pmmction 20 Scan mone PIE E EE E PEE 12 Repeating Cracke 20 pound EES deg Ne 9 Safety notes 14 EH Dre Sets cc cece cece eee ees 13 Call enee 19 Stations Manual tuning radio 13 Se e KE 12 Menu assignment cece ees 8 MP3 WMA mode audio_ZA 1 6 de DE sabbaeu General Notes As the scope of the delivery depends on the order placed the equipment in your vehicle may deviate from that shown in some of the descriptions and illustrations In order to adapt our vehicles to the ever advancing technologies available we must reserve the right to make changes to design equipment and technology Therefore no claims can be derived from any o
27. u to store a station e manually using the number keys all pre set groups e automatically using the Autostore function FM 2 and AM 2 only Storing Stations Manually Using the Number Pad gt Select the desired pre set group FM 1 FM 2 AM 1 or AM 2 gt Select a station gt Press and hold the desired number key e g 4 until you hear a tone The currently set station is stored under pre set 4 in the pre set group selected Storing stations using the Autostore function The Autostore function automatically assigns receivable stations to the pre sets in the pre set groups FM 2 and AM 2 in an order corresponding to the quality of reception Any channels stored manually in these pre sets will be lost gt To autostore FM stations select the pre set group FM 2 gt Press and hold the FM button gt To autostore AM stations select the pre set group AM 2 gt Press and hold the AM button gt The Autostore function scans the waveband and stores the stations found in the pre set group selected b gt audio_ZA 1 6 de DE sabbaeu Once the process has been completed the radio tunes into the first station stored in the selected pre set group To cancel the Autostore function press any button while the search is running The Autostore function is cancelled and none ofthe stations found uptothat point are stored The radio returns to the station previously set If the process
Download Pdf Manuals
Related Search