12-1050 Visual Fault Locator User Manual
Contents
1. 12 1050 2 4 Visual Fault Locator apos AA battery 60 ImW 100g excluding batteries 4 Operation 4 1 Put 2 pcs AA battery into the locator and then press PWR key on the bottom of the tester to switch on it The locator will switch between the continuous laser and 2Hz If the indicator is on the laser outputs continuous 650nm red laser 4 2 Press PWR again the laser and indicator are blinking at the same time the frequency is about 2Hz which is convenient to check line faults And then press PWR again to switch to continuous laser mode 5 Maintenance 5 1 This visual fault locator is metal shell please avoid collision strong acid alkali and other hazardous substances 5 2 Keep laser connector head face clean please do not use dirty and nonstandard adapter connector do not insert 5 12 1050 2 4 Visual Fault Locator bad polished surface head face otherwise the laser head face will get hurt Before using please use absorbent cotton with alcohol to clean fiber ceramics core after drying to test 5 3 When not using the visual fault locator please cover dust cap to keep head face clean which can ensure enough power output 5 4 Please take battery out if not use which can ensure the battery working life 5 5 Note when this visual fault locator is working it is forbidden that eyes stare output end of the laser which will hurt eyes and skin 6 Simple faults and solutions2. 12 1050 Visual Fault Locator User Manual V2 0 Content 12 1050 2 4 Visual Fault Locator I SUMIM ANY arte 2 2 Functions and features 4 3 SPECHCANONSi een 4 4c0peralloNi ansia ale aaa 5 5 Maintenance Ma rarrciacveires tockinettokinetinckianttoulnni tartans 5 6 Simple faults and solutions 6 1 Summary 650nm visual fault locator is used to identify fiber and 2 12 1050 2 4 Visual Fault Locator locate faults of SM or MM fiber it is a helpful assistant to dead zone of OTDR it also a basic maintenance tool for fiber network LAN ATM fiber system and telecom network system Indicator PWR Key 12 1050 2 4 Visual Fault Locator 2 Functions and features 2 1 Support CW and 2Hz modulation work mode 2 2 Solid Design use special laser end design to avoid damage when dropping on the floor 2 3 Long working hours use effective laser drive circuit to ensure 1mW 650nm locator can work more than 60 hours continuously 2 4 Stable power output use special laser driver circuit which can ensure stable power output in the low battery 2 5 2 5mm universal adapter use 2 5mm universal adapter can match SC LC adapters 3 Specifications avelength 650nm 10nm Light source FP LD laser enger 1mW 3mW 5mW 10mW W HRR 15mW 20mW optional 2 5mm universal adapter CW or 2Hz modulation Operati emperature Storage temperature 25 70 C 4
3. Faults Reasons Solutions No output low voltage Replace battery when power on Small output Laserhead face clean laser head face power is dirty or low or replace battery voltage 12 1050 2 4 Visual Fault Locator
Download Pdf Manuals
Related Search