Owners Manual - SpeakerPoint
Contents
1. Amp Panel amp Controls for R3 0 1 Stand by On Indicator The LED indicates whether the unit is in stand by mode or operational It will be illuminated red when in stand by and green when operational Crossover Frequency Control The crossover frequency control only operates when the low pass filter switch refer to section 3 is in the In position This control feature is used to set the upper frequency limit low pass of the R370 The crossover control should be set in accordance with the size or bass output of the main satellite soeakers Refer to the chart below as a guide to setting the crossover frequency control to the optimum position Much will depend on the correct low frequency response of the main speakers and their position in your room Experimentation is advisable Type of Main Speaker Monitor Audio Product ie a Low Pass Filter Switch When set to the In position the crossover frequency control section 2 is activated and can be adjusted from 40Hz to 120Hz using the crossover frequency control When set to the In position it can be used with an amplifier that does not have a dedicated subwoofer or LFE output such as a stereo 2 channel amplifier If the amplifier or AV processor has a dedicated LFE or subwoofer output the Low pass filter switch should be set to the Out position The low pass filter will then be set by the AV amplifier s internal filter This should be set in accordan2. AAO US 360 A0 US 370 Owners Manual RadiusHD Subwoofer Manual Rev2 l indd 2 1 Introduction Important Safety Instructions Re cycling RoHS Declaration of Conformity Unpacking Amp Panel and Controls for R360F Amp Panel and Controls for R870 Positioning Initial Set Up Set Up Specifications O O A FP WB UO N O Trouble Shooting Guarantee and Service ji NO Claims under this Guarantee CO EC Declaration of Conformity k IN Data Protection ne IN Owner Information Introduction Thank you for your purchase of a Monitor Audio Radius subwoofer which has been designed and constructed using quality systems and materials to provide years of enjoyment reliability and pride of ownership Building on the overwhelming success of the original Radius Series Radius brings redesigned cabinet profiles enhanced cabinet structure improved aesthetics and improved sonic balance and response Please read through this manual to familiarize yourself with any safety advice and how to set up your subwoofer to achieve the very best listening experience Please follow this user manual carefully as it contains important information about positioning and set up procedures For further advanced information on system set up FAQ s and multi lingual support please refer to our web site at www monitoraudio co uk Please retain this manual for future reference
3. The separate collection and recycling of your waste equipment will helo conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment x For more specific information about where you can take your equipment for recycling please contact your local city council office your local waste disposal service or the outlet where you purchased your Radius product ROHS Declaration of Conformity Directive 2002 95 EC of the European Parliament and of the Council on the reduction of the use of certain hazardous substances in electrical and electronic equipment January2003 Background The RoHS directive restricts the use of Lead Pb Cadmium Cd Mercury Hg hexavalent Chromium CrVl polybrominated biphenyl PBB compounds and polybrominated diphenyl ether PBDE compounds in electrical and electronic equipment sold in the European Union RoHS COMPLIANT 2002 95 EC monitoraudio co uk 3 24 03 2009 14 14 45 OGG Unoacking A feature of both the Radius subwoofers is the exposed drive unit Great care must be exercised at all times to ensure it is not damaged during unpacking and when finally sited in the AN room Any physical damaged caused to the drive unit by not complying with this requirement will not be covered by warranty The feet are attached to your product ready to use The mains power cord is contained separately in the packaging
4. you sub play a variety of music film excerpts that you are familiar with starting at a very low volume level increasing to an average listening level once you are sure everything is working correctly Please now follow the instructions below e For use with an AV amp receiver product with Subwoofer output please select the low pass filter switch to the Out position Otherwise select low pass filter switch to the On position This engages the crossover frequency control on the subwoofer please refer to pages 5 amp 7 e f using the crossover frequency control please adjust in accordance with the table on page 6 Further fine tuning may be required e The Phase Control can now be set please refer to pages 5 amp 7 for further information It is important to try a variety of music and film excerpts with which you are familiar in order to obtain the optinum overall settings A lot of AV amplifiers receivers have an auto set up on them If you use this to set up your sub please remember to go back into the settings of your AV amp and check them You may need to go back and set it up manually both on the sub and on the AV amp 12v Trigger R870 only When you are happy with the set up of your R370 turn off both the source and your sub woofer Connect the supplied lead to your amp and your sub The Power Mode Switch on the R370 can be left in any position The Mains Power Switch should be left in the on positio
5. 2 volt signal is supplied by the AV amp receiver and tells the R870 to turn on from standby mode This allows a more accurately controlled auto on off function and is far more energy efficient When using this method of connection it does not matter what position the Power Mode Switch 5 is in for it to function correctly RCA Line Level Inputs Left amp Right This is the only method of signal input connection to the R370 When using a stereo amplifier system connection can be provided by a pair of high quality signal cables from the pre out section of an amplifier If a digital AV processor or AV receiver amplifier is to be used a single cable can be connected from the sub out or LFE connection on the amplifier to the RCA input connection on the R370 labelled R The RCA input marked L in this case will remain unused Note cable lengths should not exceed 10 metres to avoid interference from other electrical appliances monitoraudio co uk T 24 03 2009 14 14 51 OKI 8 RCA Line Level Outputs Left 8 Right RCA line level outputs are provided in order to use other sub woofers in conjunction with the R370 by daisy chain type connection The outputs are link out only connections and do not provide any form of filtering 9 IEC Mains Power Connector Fuse Location The R370 is supplied with a two pin mains input socket for connection to the mains supply Use ONLY the appropriate IEC mains lead provided wi
6. A13 12 96 Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment EN55020 12 94 A11 12 96 Electro magnetic immunity of broadcast receivers and associated equipment EN61000 3 2 04 95 A1 1998 A2 1998 Electro magnetic compatibility EMC Part 3 Limits Section 2 Limits for harmonic current emissions equipment input current up to and including 16 Ampere per phase EN6100 3 3 01 95 Electro magnetic compatibility EMC Part 3 Limits Section 3 Limits of voltage fluctuations and flicker in low voltage supply systems for equipment with rated current up and including 16 Ampere per phase Name D S Hartley Signed by Position Technical Director Company Monitor Audio Ltd 12 Radius monitoraudio co uk 13 RadiusHD Subwoofer Manual Rev2 l indd 12 13 D 24 03 2009 14 14 53 OKI Data Protection We at Monitor Audio are committed to respecting the wishes and privacy of our customers Any information you provide will be held in the strictest confidence and only used within the Monitor Audio organisation for the provision of services such as warranty claims or spare parts We may wish to contact you in the future to ensure you are happy with the products and standards of service we provide and to keep you up to date with the latest products and promotions we have to offer Should you wish not to be contacted by us either by post e ma
7. and should be removed prior to unpacking the product To remove the product from its carton place some protective material on the floor and having removed any other loose items mains lead from the top of the packaging carefully invert the carton Also see the icons on the carton Gradually pull the carton upwards to expose the subwoofer which will be presented with its base uppermost Remove fixing tape from plastic bag and expose the base cabinet The feet are factory fitted to your product to allow for swift installation and enjoyment of you new purchase Amo Panel amp Controls for SS60 QO O monitor AUDIO Mine Max FREQUENCY Hz lt 2 Radius 360 Q INPUT 3 9 3 gt CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE 4 0 MODE l l PHASE lt 4 o COVER OR BACK NO USER SERVICEABLE PARTS INSIDE n KI 180 REFER SERVICING TO QUALIFIED SERVICE PERSONNEL 9 R AUTO 5 NBS o eG WARNING SHOCK HAZARD DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR POWER 2 ga sl 110 120V 220 240V 110 120V 60 Hz wiva UO 9 qt 210 WATTS 8 n CAUTION FOR CONTINUED PROTECTION AGAINST RISK OF FIRE REPLACE ONLY WITH SAME TYPE FUSE AND RATING ATTENTION UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE ET CALIBRE NTERTE CONFORMS TO GR AnsiuL STD 60065 CERTIFIED TO c US CANicsasTD 4 LISTED C22 2 NO 60065 3075808 wWw monitoraudi
8. ash with an arrow head symbol within an equilateral triangle is intended to alert the user to the presence of un insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons ORG NOT OPEN Warning To reduce the risk of electric shock do not remove cover or back no user serviceable parts inside Refer servicing to qualified service personnel SALTO TO DUCE THE BSK OF ELECTR SHOCK DO HOT REHNE CUA ER OR RACEK Ho PSL EE SL HAT UE PARTS INSUL REFER SE EH To CARAFE D PERSO I This exclamation point within an equilateral triangle is intended to alert the user to presence of important maintenance servicing instructions in the literature accompanying the appliance This is a Class II double insulated apparatus This apparatus must NOT have a safety connection to Earth Fe CYCIING Correct Disposal of Waste Electrical and Electronic Equipment WEEE by User in Private Households in the EU This symbol on the product or accessories indicates that they must not be disposed of with your household wastes throughout the EU To prevent possible harm to the environment or human health from uncontrolled waste disposal recycle it responsibly to promote the sustainable reuse of material resources Instead it is your responsibility to dispose of your waste equipment by handing it over to a designated WEEE collection point for recycling
9. ce with the amplifier or AV processor user guide Phase Control Switch The Phase Control is used to synchronise any delay between the R370 and main satellite speakers When the R370 is in phase with the main satellite speakers the sound should be full bodied Sit in a normal listening position whilst adjusting the phase switch Help from another person may be required in order to do this easily When set correctly the location of the subwoofer should be almost undetectable Experimentation is advisable in order to achieve optimum results However it should be noted that in most cases the phase control switch should be set to O degrees especially when using a digital AV processor or AV receiver amplifier Power Mode Switch with On Auto Off Facility The Power Mode Switch has three positions On Auto Off With the switch in the On position the subwoofer is permanently switched on under all conditions In the Auto position the subwoofer will automatically switch on when an input signal is received and will remain on until no signal is received for around 10 15 minutes the R370 will then switch into standby mode until a signal is received once more When the switch is in the Off position the subwoofer will not function 12 Volt Trigger Input Centre Pin 12Vdc For external power control from AV amplifier receiver to the R870 Monitor Audio recommend using this function and a lead is supplied This 1
10. e output between the Radius 360 R370 P and main satellite speakers For most applications this should be set to 0 degrees 5 Mode Switch This facility is used to set the desired frequency contour for music or home cinema system Music mode 4 has a much smoother flatter response Where as in movie mode there is a 3dB boost between 30 50Hz before it smooths out 6 Power Mode switch The Power Mode Switch has three positions On Auto Off With the switch in the On position the subwoofer is permanently switched on under all conditions In the Auto position the subwoofer will automatically switch on when an input signal is received and will remain on until no signal is received for around 10 15 minutes the R3860 will then switch into standby mode until a signal is received once more When the switch is in the Off position the subwoofer will not function 7 Power LED 8 Mains Voltage Selector This is factory set to your country s mains voltage specification Do not attempt to adjust this as this may lead to permanent damage to the product and even the risk of fire There is a clear plastic cover over the selector to prevent accidental adjustment 9 Power Switch with Auto off Facility The power switch has two positions Off Auto On In the Auto On position the sub woofer unit will remain in standby mode until the unit receives an input signal greater than 4mV If the subwoofer unit does not
11. il or phone please tick the box on the warranty card Alternatively you can reguest not to be contacted in future by writing to Customer Service at the address on the previous page Owner Information Product Details Model R360 R370 Product Serial NO zeta Amp panel Serial NO cccccccceeeseeee eee eeneeeees Date of Purchase ssssssssesrrrensrrrrresrrrrresrren Dealer Details BEEN EE AOO O aa nekeer reden ennn en nue TOW Ost COGS COUR asen ermee neee tree Renderen e mail address nnee eenen neee ereen enerverende eene Monitor Audio reserves the right to alter specifications without notice 14 Radius RadiusHD Subwoofer Manual Rev2 l indd 14 15 24 03 2009 14 14 53 MONITOR AUDIO Monitor Audio Ltd Unit 2 24 Brook Road Rayleigh Essex 556 7XL England Tel 01268 740580 Fax 01268 740589 Email info monitoraudio co uk monitoraudio co uk Designed in the United Kingdom Version 2 2008 RadiusHD Subwoofer Manual Rev2 1 indd 16 24 03 2009 14 14 53
12. me at minimum and increase the level control until a balanced sound is established If using an AV processor or AV receiver amplifier the system can adjusted by the test tone function within the set up features Refer to the set up section in the AV processor or AV receiver amplifier user guide When the R370 is correctly set up you should not be able to identify its location easily in the room 14 EQ 1 setting The EQ 1 setting should be set as a default option This will provide the best overall transient response and power output This setting will provide a maximally flat response suitable for music or music video Note Frequency roll off starts at 27Hz 15 EQ 2 setting The EQ 2 setting should be used when an emphasis in the low freguency is required An additional boost of AdB will be provided at 21Hz to give impact essential for action movies You can toggle between the EQ1 and EQ2 to test which one is best suited to your environment This is done by pressing the buttons located on the control panel The blue LED s of the EQ buttons will remain on permanently This indicates that the unit is in stand by mode when not in use 8 Radius RadiusHD Subwoofer Manual Rev2 l indd 8 9 Postioning Inital Set Up Leave the subwoofer unplugged from the mains until the installation procedure is completed The subwoofer should now be sited in the most suitable position preferably not directly in the corner of the room as this may cau
13. monitoraudio co uk 4 24 03 2009 14 14 43 OKI mportant Safety Instructions 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus with water 6 Clean only with a dry cloth Great care and attention has gone into the materials chosen to produce the product A gentle wipe with a dry clean cloth is all that is required to remove any dust Treat it as you would a fine piece of furniture because that is how they have been designed 7 Do not block any ventilation openings Install in accordance with Monitor Audio s instructions 8 Do not install near any heat source such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the purpose of the polarised or grounding type plug A polarised plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wider blade or the third prong are provided for your safety If the provided plug does not fit your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by Monitor Audio 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold
14. n With the trigger connected the sub will turn on when the source is turned on and will stay until the source is turned off This is the most energy efficient way of using your sub woofer monitoraudio co uk 9 24 03 2009 14 14 52 OKI Spectication mor Low frequency limit Upper frequency limit Low pass filter alignment Cabinet Specification Amplifier Output Amplifier classification Driver compliment Dimensions H x W x D Input Impedance Mains input voltage Factory Preset mee li Low frequency limit Upper frequency limit Cabinet Specification Amplifier Output Driver compliment Dimensions H x W x D Input Impedance Mains input voltage Factory Preset 27Hz EQ1 21Hz EQ2 40 120 Hz Variable Active 4th order 24db octave two stage filter sealed Cabinet of 25mm M D F construction with internal bracing 250 Watts RMS Class D Digital amplifier 1 x 10 C CAM subwoofer driver Millimetres 367 x 320 x 320 Inches 14 Le X tx ae 20K Ohms 110 120 Vac 220 240 Vac 50 60Hz 2 HZ 40 180 Hz Variable sealed Cabinet of 18mm M D F construction 100 Watts RMS 1 x 8 Ultra long through subwoofer driver Millimetres 375 x 225 x 321 Inches 14 7 x8 7121 20K Ohms 110 120 Vac 220 240 Vac 50 60Hz C CAM is a registered trade mark of Monitor Audio Ltd 10 RadiusHD Subwoofer Manual Rev2 1 indd 10 11 Radi
15. nown to be working set e ls the volume level just very low If it still does not output a signal please contact your local dealer distributor or Monitor Audio immediately Guarantee and Service To validate your warranty please visit www monitoraudio co uk within 30 days of purchase When you register here you ll gain free entry to our monthly prize draw What s more you ll be the first to hear about the great things happening at Monitor Audio including new products and events This equipment has been fully tested prior to dispatch from the factory Both the craftsmanship and the performance of this product is guaranteed against manufacturing defects for the period of one year from the date of purchase see conditions below provided that the product was supplied by an authorised Monitor Audio retailer under the consumer sale agreement The words consumer sale shall be construed in accordance with section 15 of the supply of goods act 1973 Monitor Audio accepts no responsibility for defects arising from accident misuse abuse wear and tear modification or operation outside of that specified within this instruction manual Neither will responsibility be accepted for damage or loss occurring during transit to or from the parties claiming under this guarantee This guarantee covers both labour and parts The liability of Monitor Audio is limited to the cost of repair or replacement of the defective parts at the discretion of Monitor A
16. o co uk A 10a 10 4 Radius RadiusHD Subwoofer Manual Rev2 l indd 4 5 1 Volume This control allows the subwoofer level or loudness to be adjusted in order that you can achieve a totally controlled balanced sound 2 Frequency This feature controls the upper frequency limit of the Radius 360 The table below will help you to select the correct frequency at which to crossover depending on your main speakers Type of Main Speaker Monitor Audio Product a Large floor standing speaker PL300 GS20 60 RS6 8 BR6 40 60 Hz Small floor standing speaker Roo BR5 R270 50 70Hz Large stand mount bookshelf speaker PL100 GS10 50 80 Hz Small stand mount bookshelf speaker RS1 BR1 2 R225 R250 Aone 60 90 Hz Small satellite speaker R45PP ROOPP R1 80 80 120 Hz 3 RCA Phono Input Connection This is the only method of signal input connection to the R860 When using a stereo amplifier system connection can be provided by a pair of high quality signal cables from the pre out section of an amplifier If a digital AV processor or AV receiver amplifier is to be used a single cable can be connected from the sub out or LFE connection on the amplifier to the RCA input connection on the R860 labelled R The RCA input marked L in this case will remain unused Note cable lengths should not exceed 10 metres to avoid interference from other electrical appliances 4 Phase The phase control is used to synchronise th
17. receive a signal within 10 15 minutes it will switch to standby mode until it receives a further signal 10 IEC Mains Power Connector Fuse Location The R860 is supplied with a two pin mains input socket for connection to the mains supply Use ONLY the appropriate IEC mains lead provided with the product Also fitted is an external mains fuse If this fuse blows during operation a spare fuse is provided within the fuse holder for replacement If you wish to change the fuse you can do this by removing the IEC mains lead and carefully levering out the original fuse from Its holder below the IEC mains input socket 10a If the fuse blows again it is advisable to seek help from an authorised service agent DO NOT attempt to re fit a further fuse as this could result in serious damage to the amplifier unit 11 Warning Information See warning information on page 3 monitoraudio co uk 5 24 03 2009 14 14 45 11 RadiusHD Subwoofer Manual Rev2 l indd 6 7 CD MONITOR AUDIO www moniloraudia ca uk E 6 Radius 370 280 WATTS AMS DIGITAL SUBNVUDFER 3 AUTO OFF TRIGGER LALTKOH POE COK TIKUD PIT DET EO Bid T Hii OF EDF BFR ACE Coa tf ATH adda A RANEH APRN PRGA UP eco i Furl CU RECHAMOT Bl MLMET TPI UT AT INPUT VOLTAGE 118 128 VAC J Eb He E i 220 240 VAC f 50 He rive pen qe Zip Zen E 110 120 W FUSE T AL 250W 220 240 V FUSE TZAL 2504 310 WATTS 0 2 Fe DZ zen D Radius Oa
18. se excessive bass boom Once a desirable position is achieved it is important to check if the cables are long enough to reach comfortably without being under tension The optimal control settings will depend entirely on your system configuration For initial trials set the controls as follows Should be set to minimum Should be set to the minimum position 40Hz Should be set to zero degrees Should be set to Auto if not using 12v trigger EQ Setting R870 Only This will be set as EQ1 by default when powered up Mode setting R360 Only This should be set to Music 43 Low Pass Filter Switch R370 Only Should be set to the Out position Volume Control Frequency Control Phase Control Power Mode Switch R370FP Only Input connections can be made at this stage before the power is connected to the subwoofer Do not connect the 12v trigger yet Never connect or disconnect any leads with the subwoofer switched on set Up Once the input cables are connected and the controls are set in accordance with the initial set up procedure above the subwoofer can be connected to the mains power supply and switched on at the mains power switch Do not play any music at this stage Power Mode Switch in the Auto position the unit should remain in standby with the power LED on the amp panel should be red and the EQ1 button illuminated blue R370PP only until the AV amp is turned on or a signal is received To manually set up
19. th the product Also fitted is an external mains fuse If a fuse blows during operation a spare fuse is provided within the fuse holder for replacement If you wish to change the fuse you can do this by removing the IEC mains lead and carefully levering out the original fuse from its holder below the IEC mains input socket 9a If the fuse blows again it is advisable to seek help from an authorised service agent DO NOT attempt to re fit a further fuse as this could result in serious damage to the amplifier unit 10 Warning Information See warning information on page 3 11 Mains Power Switch The Mains Power Switch should be switched to the Off position when the R370 will not be used for extended periods The switch must be in the On position for the subwoofer to function WARNING Due to the mains switch being located on the rear panel the apparatus must be located in the open area with no obstructions to access the mains switch 12 Mains Voltage Selector This is factory set to your countries mains voltage specification Do not attempt to adjust this as this may lead to permanent damage to the product and even the risk of fire There is a clear plastic cover over the selector to prevent accidental adjustment 13 Volume Control This control allows the level or volume to be adjusted in order to achieve a balanced overall sound To use this facility you will need to play a selection of familiar music or film excerpts Start with the volu
20. udio and under no circumstances extends to consequential losses or damage monitoraudio co uk 11 24 03 2009 14 14 52 OKI Claims under this Guarantee EC Declaration of Conformity The equipment should be returned in its original packaging to the original supplier where possible or to any other authorised Monitor Audio dealer If it is not possible to return the equipment by hand then it should be sent carriage prepaid via a reputable carrier If the original packing is not available replacement packaging can EC Declaration of Conformity be purchased from Monitor Audio If you have any difficulties complying with these requirements please contact us at the following address We Monitor Audio Ltd Customer Service Tel 44 0 1268 740580 Unit 2 24 Brook Road Monitor Audio Ltd Fax 44 0 1268 740589 Rayleigh Unit 2 24 Brook Road Internet www monitoraudio co uk Essex Rayleigh Email info monitoraudio co uk SS6 7XL 08 Essex England SS6 7XL England Declare in own responsibility that the R370HD product described in this manual is in compliance with Technical Standards Council Directives This guarantee does not affect the statutory rights of the consumer under UK law LVD 73 23 EEC Low Voltage Directive EN60065 09 93 A11 09 97 Safety requirements for mains operated electronic and related apparatus for household and similar use EMC 89 336 EEC Electro Magnetic Compatibility EN55013 08 90 A12 08 94
21. us Trouble Shooting Should you experience any technical or set up problems with your subwoofer please check the Trouble Shooting Guide below My subwoofer will not turn on no power e Is the LED illuminated on the back of the unit If not then check your mains lead is properly connected both at the subwoofer and at the mains outlet Also check the fuse of the mains plug where fitted and also the fuse in the subwoofer See page 5 amp 8 for further information on changing the fuse and it s location e ls the LED on the back red If so you have power going to the unit It could be that there is no signal or the 12v trigger is connected and the source not turned on see below e Have you got the 12v trigger connected If so the subwoofer will not power up until the source is powered up e Has it got a signal going to it 12v trigger not being used If so is the Power Mode Switch in the Auto or On position and the signal source is turned on Try adjusting the volume level of the source If it still does not turn on power up please contact your local dealer distributor or Monitor Audio immediately No sound from subwoofer e ls the LED on the back red or green If it is red then the unit hasn t actually turned on See above comments If it is green then your unit is powered up and turned on Check further suggestions below e Are the signal leads connected correctly Check these If possible check with a second k
22. with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightening storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen onto the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 This apparatus shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus 16 The appliance coupler is used as the disconnect device the disconnect device shall remain readily operable 17 This exclamation point within an equilateral triangle is intended to alert the user to the presence of important maintenance servicing instructions in the literature accompanying the appliance 2 Radius RadiusHD Subwoofer Manual Rev2 l indd 2 3 e TO PREVENT FIRE OR SHOCK HAZARD DO NOT USE THIS PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE e TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE e TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE PLUG TO WIDE SLOT AND FULLY INSERT This lightning fl
Download Pdf Manuals
Related Search