1. Troubleshooting ie Troubleshooting Precautions Before Troubleshooting Push the locking tab to disconnect Check the main fuse and the fuse box Check the battery for damage state of charge and clean and tight connections Check the alternator belt tension CAUTION Do not quick charge a battery unless the battery ground cable has been disconnected or you will damage the alternator diodes Do not attempt to crank the engine with the bat tery ground cable connected incompletely or you will severely damage the wiring While You re Working Make sure connectors are clean and have no loose LOCKING TABS pins or receptacles Make sure multiple pin connectors are packed with grease except watertight connectors Since new type connectors are used connection and disconnection of them should be done paying attention to the following precautions Because all the connectors except terminal of 1 P are equipped with push down type locks unlock them first before disconnecting the connectors On the connectors installed on the bracket a pull type lock is equipped between the bracket and the connector Some connectors of this type can not be discon nected unless they are removed from their brackets When disconnecting check their shapes On the bracket mounted connector with dual locks remove the connector from the bracket before disconnecting LOCKING PAWL Pull to disengage BR 2. ACKET cont d 16 3