USER GUIDE FOR
Contents
1. USER GUIDE FOR NETmc MARINE Integrated Video System NETVcG Rev 1 August 2007 NETmec Marine Integrated Video System Manual Rev 1 Aug 07 Contents Section Description Page 1 Introduction to Integrated Video System 3 Operating Instructions 4 2 User Guide for 73fifty Digital Video Recorder 5 3 User Guide for VideoTXT Overlay 30 This eguipment has been tested and found to comply with the limits for a Class A digital NETmc Marine Dunann Cottage Turfhill Cuminestown Road New Deer Aberdeenshire AB53 6TL TEL 44 1771 644001 FAX 44 1771 644005 Note device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense NETmec Marine Integrated Video System Manual Rev 1 Aug 07 1 Introduction The Integrated Video System is a complete system combining a 73fifty digital video recorder and a VideoPWR camera lamp controller and optionally a VideoTXT overlay unit The unit h2. as a built in TFT monitor and audio output speaker and is operated from within its transit case Built in monitor Speaker Menu access A button and e n Volume control arrow keys Power button to activate monitor 73fifty Digital i Video Recorder Space for optional VideoPWR VideoTXT overlay camera lamp controller 3 of 4 NETme Marine Integrated Video System Manual Rev 1 Aug 07 2 Operating Instructions Note this unit should be earthed 1 2 Connect the power supply to the rear of the unit Connect the camera to the front of the unit Switch on the VideoPWR camera lamp controller IMPORTANT Please plug in and switch on all video and audio input connections before switching on the 73fifty This is because the 73fifty will automatically detect which type of video signal PAL NTSC or SECAM is present Switch on the 73fifty digital video recorder Note that the unit takes a few seconds to configure the system before becoming fully operational Press the Power button to activate the monitor Live video direct from the camera is now displayed on the screen If required connect the additional video output at the rear of the unit to a separate monitor Use the menu to change the display on the monitor between live video channel 1 and QC video channel 2 Note that the QC video has a 2 second delay To use the menu options press Menu and scroll through the options using the arrow key
3. s In case of problems The fuses are located behind the VideoPWR section of the unit and can be accessed by unscrewing the rear panel of the Integrated Video System Note Whilst every effort has been made to ensure that the information contained in this manual is accurate no liability can be accepted for errors and omissions NETmc Marine Integrated Video System Manual Rev 1 Aug 07 4 of 4
Download Pdf Manuals
Related Search