UNIVERSAL HEADSET USER GUIDE
Contents
1. UNIVERSAL HEADSET USER GUIDE Contents Introduction Features Connection Adjustment Safety Introduction Thank you for purchasing this product Your new headset has been developed using the latest technology designed for comfort and freedom of movement This headset is very easy to use and setup although to get the best from your new purchase we recommend you read this user guide carefully before using the headset for the first time Unpacking Remove your headset from its packaging and ensure that along with this user guide you have the correct specified accessories Retain the headset box for storage of your unit and also in the unlikely event that it needs to be returned for servicing or repair Warning Ensure that all electrical connections including extension leads and interconnections between pieces of equipment are properly made and in accordance with the relevant manufacturers instructions Do not continue to operate the equipment if you are in any doubt about it working normally or if it is damaged in any way Disconnect from your telephone equipment and consult your dealer Do not allow electrical equipment to be exposed to rain or moisture Never push anything into holes slots or any other opening on your headset as this could result in fatal electrical shock Do not open the headset housing as doing so will void the warranty Never guess or take chances with electrical equipment Telephone headset2. phone Using the Quick Disconnect Lead Your headset may be equipped with a Quick Disconnect allowing you to move away from your desk disconnecting the 2 connectors without losing the call 5 Adjusting the Headband Place the headset receiver to your ear s if using a single ear headset you should set the T bar above your other ear Adjust the headband until it is comfortable ideally ensuring there is virtually no pressure felt on the ear s Most headsets can be worn on either side To change the microphone side simply rotate the microphone boom 180 degrees to the other side Adjusting the Microphone Boom To avoid low or distorted sound and to provide clear and crisp telephone calls the microphone should be positioned within 30 40mm of your mouth The microphone boom arm will move in a variety of directions to ensure the best fit Adjusting the Clothing clip Your new headset is supplied with a clothing clip to allow comfortable fitting of your headset without the cable getting caught or inadvertently pulled The clothing clip should be fastened at a comfortable level ensuring there is sufficient slack on the cable allowing free movement of your head without disturbing the headset position Safety For your own safety this product should only be used with CE ACA and RoHS approved equipment Using this headset with non approved equipment can void this products warranty Maintenance To gain optimal performance hyg
3. iene and life span from you headset replace all consumable items ear foam cushion microphone foam if applicable and microphone filter every 6 months Environmental notice This headset has been made to CE ROHS and WEEE standards In the interest of recycling raw materials please do not dispose of this headset in the household waste at the end of its useful life Disposal can take place at approved recycling or disposing locations in accordance with local regulations ce s COMPLIANT 2002 95 EC T
4. s are capable of producing high levels of sound Prolonged exposure to high sound levels can cause damage to hearing Headset Features Adjustable Headband Ear Cushion Microphone Quick Disconnect Clothing Clip Connecting Your Headset Does your desk phone have a dedicated headset connection port If it does simply connect your headsets Quick Disconnect cable to your chosen bottom lead not supplied then connect the bottom lead to the dedicated port on your desk phone If you find that when the headset is connected to the phone it is not working as expected then it is very likely you are using an incompatible bottom lead There are various bottom leads available these are all designed to connect your headset to specific brands of desk phone ensuring whatever your setup your headset will be compatible Please contact your dealer to attain the correct bottom lead for your desk phone Note All bottom leads are supplied as an accessory at additional cost What to do if your desk phone does not support a dedicated headset connection port Your desk phone requires an external headset amplifier If you already have a headset amplifier read through the units setup guide and connect your headset accordingly In the event that you do not have a headset amplifier please contact the supplier of this headset details found on rear of user guide They will be able to provide the correct amplifier for your headset and desk
Download Pdf Manuals
Related Search