Troubleshooting new
Contents
1. ow OP Arartridges Technical Services Front of House Equipment Maintenance and Problem Solving Cleaning the dispense head 1 Remove dispenser nozzle and clean separately 2 Submerge gun in clean hand hot water and clean with brush provided paying particular attention to around the buttons If buttons still sticking push in and out whilst submerged in the water 3 Remove drip tray Wash in clean hot water and replace Correct nozzle assembly completed back onto 1 After cleaning is take the nozzle and place the valve housing 2 Push the nozzle on and twist to remain in place Instant Problem Solving No Syrup 3 Check cooler is switch on pumps are 1 Check contents of bag in box running and ensure cooler has an 2 Check contents of CO2 bottle icebank 3 Check all boxes are connected correctly 4 If poured drink froths up in glass then 4 Check change over valve if fitted has goes flat it is reacting to the cleaning activated agent Change cleaning agent Flat Warm or Still Product 5 If no drinks have been poured that day 1 Check contents of CO2 bottle change if then pour carbonated water through the empty system until it runs cold 2 After changing CO2 bottle draw through 6 Never pour cold drinks into a warm glass at least eight pints of soda water from each tap or until normal flow is achieved Syrup only no carb water 1 Check stopcock is turned on fully and 4 Check CO2 bo2. ttle is connected and full that carbonator is plugged in and switched on 2 Check mains supply 3 Check carbonator is switched on To A LOL Essential Daily Cleaning eBarvalve Twist and pull nozzle to remove Rinse under running hand hot water Re assemble nozzle Wipe around tap rinse drip tray BIB Connector Every time you change a Bag in Box rinse the connector in clean warm water to remove syrup residue ential Daily Checks ly to ensure quality to ensure the following tio OTHER PROBLEMS CONTACT sh AN ON 014C SOSS
Download Pdf Manuals
Related Search