Operating Instructions Home Theater Audio System
Contents
1. All devices must conform to standards set by Bluetooth SIG Inc e Depending on the specifications and settings of a device it can fail to connect or some operations can be different This system supports Bluetooth security features But depending on the operating environment and or settings this security is possibly not sufficient Transmit data wirelessly to this system with caution This system cannot transmit data to a Bluetooth device E Range of use Use this device at a maximum range of 10 m The range can decrease depending on the environment obstacles or interference E Interference from other devices e This system may not function properly and troubles such as noise and sound jumps may arise due to radio wave interference if the main unit is located too close to other Bluetooth devices or the devices that use the 2 4 GHz band e This system may not function properly if radio waves from a nearby broadcasting station etc are too strong E Intended usage This system is for normal general use only e Do not use this system near equipment or in an environment that is sensitive to radio frequency interference example airports hospitals laboratories etc Unit care M Clean this system with a soft dry cloth e When dirt is heavy wring a cloth moistened in water tightly to wipe the dirt and then wipe it with a dry cloth When cleaning the speakers use a fine cloth Do not use2. Panasonic Operating Instructions Home Theater Audio System Model No SC HTB480 Bluetooth Thank you for purchasing this product Please read these instructions carefully before using this product and save this manual for future use Included Installation Instructions The installation work should be done by a qualified installation specialist gt 13 to 18 Before commencing work carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly Please keep these instructions You may need them when maintaining or moving this system Model number suffix EB denotes UK model RQT9917 1B Safety precautions i WARNING Unit To reduce the risk of fire electric shock or product damage Do not expose this unit to rain moisture dripping or splashing Do not place objects filled with liquids such as vases on this unit Use only the recommended accessories Do not remove covers Do not repair this unit by yourself Refer servicing to qualified service personnel To prevent injury this apparatus must be securely attached to the wall in accordance with the installation instructions AC mains lead To reduce the risk of fire electric shock or product damage Ensure that the power supply voltage corresponds to the voltage printed on this unit Insert the mains plug fully into the socket outlet
3. Do not pull bend or place heavy items on the lead Do not handle the plug with wet hands Hold onto the mains plug body when disconnecting the plug Do not use a damaged mains plug or socket outlet The mains plug is the disconnecting device Install this unit so that the mains plug can be unplugged from the socket outlet immediately Button type battery Lithium battery Risk of fire explosion and burns Do not recharge disassemble heat above 60 C or incinerate Keep the Button Type battery out of the reach of children Never put Button Type battery in mouth If swallowed call your doctor Small object Keep the screws out of reach of children to prevent swallowing Keep the adhesive tape out of reach of children to prevent swallowing Keep the button type battery out of reach of children to prevent swallowing 2 RQT9917 CAUTION Unit e Do not place sources of naked flames such as lighted candles on this unit This unit may receive radio interference caused by mobile telephones during use If such interference occurs please increase separation between this unit and the mobile telephone This unit is intended for use in moderate climates e Product Identification Marking is located on the bottom of the unit Placement Place this unit on an even surface To reduce the risk of fire electric shock or product damage Do not install or place this unit in a
4. device s Bluetooth menu e f prompted for the passkey on the Bluetooth device enter 0000 e Once the Bluetooth device is connected the name of the connected device will be indicated on the display for a few seconds LI e You can register up to 8 devices with this system If a 9th device is paired the device that has not been used for the longest time will be replaced 3 8 74 te lt 3 Connecting a paired Bluetooth device EP Press to enter Bluetooth mode BLUETOOTH READY is indicated on the display EJ Select SC HTB480 from the Bluetooth device s Bluetooth menu E Disconnecting a Bluetooth device Press and hold until the BLUETOOTH READY is indicated on the display LI e When BLUETOOTH is selected as the source this system will automatically try and connect to the last connected Bluetooth device e The Bluetooth device will be disconnected if a different audio source e g TV is selected This system can only be connected to one device at a time To change the sound quality refer to page 24 LINK MODE RQT9917 1 9 One Touch Connection Connecting by NFC For NFC compatible Bluetooth devices Android devices only Simply by touching an NFC Near Field Communication compatible Bluetooth device on the main unit you can complete all preparations from registering a Bluetooth device to establish
5. ARC It refers to one of the HDMI functions When you connect the main unit to the terminal labelled HDMI ARC on the TV the optical digital audio cable that is usually required in order to listen to sound from a TV is no longer required and TV pictures and sound can be enjoyed with a single HDMI cable Before use Make the connection EY Labelled HDMI ARC 3 8 74 te lt 9 HDMI IN ARC epee Be sure to connect to the TV s ARC compatible terminal Refer to the operating instructions for the TV HDMI cable RQT9917 9 EE Not labelled HDMI ARC HDMI IN AV OUT TV ARC OPTICAL DIGITAL AUDIO IN OPTICAL OUT HDMI cable Optical digital audio cable e When you use the optical digital audio cable insert the tip correctly into the terminal Connection from an HDMI compatible device You can direct the audio signal from the connected Blu ray Disc player DVD player Set Top Box etc to this system Preparation e Connect the main unit to the TV gt 9 HDMI OUT cS co e g Blu ray Disc player BD DVD HDMI cable E HDMI standby pass through Even if the main unit is in standby mode the audio and or video signal from the device connected to the HDMI AV IN terminal wil
6. Alternatively turn the active subwoofer off disconnect the AC mains lead and then reconnect it The active subwoofer and the main unit may not be paired correctly Try the following operation Wireless pairing Turn on the main unit and active subwoofer 2 Press and hold ID SET on the rear of the active subwoofer for more than 3 sec The WIRELESS LINK indicator will blink in red 3 While pressing and holding INPUT on remote control press and hold VOL on the main unit for more than 4 sec SUBWOOFER PAIRING will be indicated on the display When the wireless pairing is successful PAIRED will be indicated on the display for 2 sec and WIRELESS LINK indicator lights green 4 Turn the main unit off and on Consult your dealer if the problem persists About Bluetooth Panasonic bears no responsibility for data and or information that is compromised during a wireless transmission E Frequency band used This system uses the 2 4 GHz frequency band E Certification of this device This system conforms to frequency restrictions and has received certification based on frequency laws Thus a wireless permit is not necessary The action below are punishable by law in some countries Taking apart or modifying the unit Removing specification indications E Restrictions of use e Wireless transmission and or usage with all Bluetooth equipped devices is not guaranteed
7. Use a cord that is capable of supporting over 26 kg with a diameter of about 1 5 mm i Attach the cord to the main unit Cord x If the cord cannot be threaded through the holes try bending the cord in 2 locations about 5 mm apart from the tip at an angle of 45 as illustrated above 1 6 RQT9917 B Attach the wall mount brackets to the main unit Precautions Wall mount bracket supplied Screw supplied E Drive a screw into the wall Use the measurements indicated below to identify the screwing positions on the wall Leave at least 100 mm of space above of the main unit to allow enough space for fitting the main unit Position the main unit with at least 50 mm of free space to its right If not it may not be possible to access the buttons Be sure to use a level to ensure that both mounting holes are level to each other 3 8 74 te lt 9 Atleast 30 mm 24 0 mm 27 0 mm to 9 4 mm Wall or pillar 1 6mm to 2 5 mm 400 mm 275mm 275mm 27mm 110mm Wall mounting hole RQT9917 1 T7 4 Fit the main unit securely onto the screw s DO NOT O e Move the speaker so In this position the that the screw is in speaker will likely fall this position if moved to the left or right 5 Secure the cord to the wall Make sure that the slack of the cord is minimal Screw eye Cord 1 8 RQT9917 Step 3 Wireless conne
8. bookcase built in cabinet or in another confined space Ensure this unit is well ventilated Do not obstruct this unit s ventilation openings with newspapers tablecloths curtains and similar items Do not expose this unit to direct sunlight high temperatures high humidity and excessive vibration Button type battery Lithium battery e Danger of explosion if battery is incorrectly replaced Replace only with the type recommended by the manufacturer Insert with poles aligned Mishandling of batteries can cause electrolyte leakage and may cause a fire Remove the battery if you do not intend to use the remote control for a long period of time Store in a cool dark place Do not heat or expose to flame Do not leave the battery ies in a car exposed to direct sunlight for a long period of time with doors and windows closed e When disposing of the batteries please contact your local authorities or dealer and ask for the correct method of disposal Caution for AC Mains Lead For the AC mains plug of three pins For your safety please read the following text carefully This appliance is supplied with a moulded three pin mains plug for your safety and convenience A 5 ampere fuse is fitted in this plug Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5 ampere and that it is approved by ASTA or BSI to BS1362 Check for the ASTA mark or the BSI m
9. cate haatciecnee ecneotonaaenecuite iste da tem i ET boa eatiwmuetsets 11 veing THES IIS BLAS Ol casia sets Sceanesomscas a Sater Gata Ae Sa Ci Ae Gee that a 11 AC mains lead CONNECTION ccccccccceececeeeeeceeeeeseeeeeseecesaeeeesaeeeeseeeesseeeeseueeseeesseeeeseeessaees 12 Step 2 PlacemeNl orniga a a 13 Salely Precautions scicivicoiun cover ea E E AE EERE 13 The acUve SUDWOOTEF ou 5s Aiea eaaa a a ara a A a a A E a E REENA a 13 Wireless INLETS FOGG iret e a E AE a E OEO 13 Selecting the placement method iii c cveccaidscecdavenlaiincsadincns iacenivevs etiets sed iaawetossabanieeresaaninddvads 14 When placing the main unit in a rack or ON a table ccc ecce cece e ee ee cece eeeeeeeeeeseeeeeeeeeeeees 15 When attaching the main unit to a wall cece cee cece ence eee ee ee nessa eeeeaeeeesaeeeeaaeeesaeeeenes 16 Step 3 Wireless CONNECTIONS cccceseceeeeeeeceeeeeeceneeeesenesenesenecnesonesenseeeaenes 19 Active subwoofer wireless CONNECTION ccccceececceeecceeeeeeneesseneeseueeeseaeessesesseneesneessages 19 Bluetoothi Comecon san ea O e mntgnenieesiocteadad cena torte eae aaa 19 REMOtE CONTOLNCOQE arnein EAEAN ETa ATE Aae ANEA 20 Operations USMO EMIS SYSTEM massita at oaa aea e EEA E Naaa ASA 21 SD SOUNA iei a aa iaaa a a Sna 22 Sound Menu eria a A a E 22 PAUICIO AOTC e e E E A NON 23 SO CUI PD MENU aaan E a E EN 24 Linked operations with the TV VIERA Link HDAVI Control a a 25
10. the holes try bending the cord in 2 locations about 5 mm apart from the tip at an angle of 45 as illustrated above ke 3 O d Q O Place the main unit in the desired position and attach each cord onto the rack or table e Make sure that the slack of the cord is minimal e Do not lean the main unit against the TV or wall Screw eye e Attach at a position capable of supporting over 26 kg e Depending on the placement of the main unit the screwing position of the screw eye may differ RQT9917 1 5 i When attaching the main unit to a wall The main unit can be wall mounted using the supplied wall mount brackets etc Make sure that the screw used and the wall are strong enough to support the weight of at least 26 kg The screws and other items are not supplied as the type and size will vary with each installation e Refer to step 3 for details about the required screws e Be sure to attach the fall prevention cord as a secondary safety measure Supplied accessories 2 Screws P og 2 Wall mount brackets DE O Additionally required accessories commercially available e Screws fof wall MOUNINO ic cisiiicecnicas ceataubsrniseaessauinue naen EAA NEAR CA EAE A EnA AE PANASSS aSa x 2 Fall prevention COU cect teetecceucratnewsk io a eE r EEEO ES EEEE x2 e Screw eyes to attach the fall prevention COr ccccceeccceceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeaeeeeeeeaaeeeeseeees x 2 L e
11. 7 Mute the sound 9 21 8 Select and confirm the option E About remote control signal sensor The remote control signal sensor is located on the main unit e Use the remote control within the correct operation range Distance Within approx 7 m directly in front Angle Approx 30 left and right For table top layout For wall mounting layout Remote control signal sensor for table top layout Remote control signal sensor for wall mounting layout 8 RQT9917 Step 1 Connections e Turn off all equipment before connection and read the appropriate operating instructions Do not connect the AC mains lead until all other connections are completed E HDMI High Definition Multimedia Interface e The HDMI connection supports VIERA Link HDAVI Control gt 25 when used with a compatible Panasonic TV e Use the ARC compatible High Speed HDMI Cables Non HDMI compliant cables cannot be utilised e t is recommended that you use Panasonic s HDMI cable E IR Infrared Blaster e Do not use the IR Blaster if the TV s remote control sensor is not blocked by the main unit gt 14 Connection with the TV ala Verify if the TV s HDMI terminal is labelled HDMI ARC Connection differs depending on the label printed next to the HDMI terminal Labelled HDMI ARC Connection Ey Not Labelled HDMI ARC Connection E E What is ARC ARC is an abbreviation of Audio Return Channel also Known as HDMI
12. EAREN similar to 5 1ch commentaries STEREO Play any source Adding to the Dolby Virtual Ing edie of sound in stereo Speaker effect Panasonic has applied its own sound You can adjust the amount field controlling technology to of bass This system 3D surround expand the sound field automatically selects the effect forwards backwards most suitable setting upwards and downwards according to the type of providing a sound with depth playback source and force that better matches LEVEL 1 3D images SUBWOOFER LEVEL 2 Default for Sports commentary and 2 channel audio source dialogs from TV dramas are LEVEL 3 Default for multi heard as if the sound is channel audio source coming from the TV giving LEVEL 4 the feeling that the sound and The setting you make is the image are one retained and recalled every Also the dialog will stand out time you play the same from the other sounds during type of source normal volume playback and Adjust the dialog level when the volume is lowered LEVEL 1 for night time viewing LEVEL 2 LEVEL 3 Clear mode dialog QO DIALOG LEVEL 4 Dolby Virtual Speaker effect is ON except STEREO mode DIALOG is not indicated To turn off Dolby Virtual Speaker and the 3D surround on the display when 3D effects select STEREO as the sound mode amp right CLR DIALOG is set to To turn off the 3D surround and the Clear mode dialog OFF effects refer to 3D CLR DIALOG g
13. Reference TFOUDICSNOOUNG aroiryn oaee aE EE Ea EA 26 PDOUU BIN STOUR isna E sack O aNs 29 UDNILCAFE sationac nae a E E E ieee 29 LICENSES araro A 29 DDESCITICAUONS morirai a tines aacnaeenesaterbatabenns 30 4 RQT9917 The illustrations shown may differ from your unit e Operations in this operating instructions are described mainly with the remote control but you can perform the operations on the main unit if the controls are the same Supplied items This system SC HTB480 _ 1 Main unit speaker 1 Active subwoofer SU HTB480 SB HWA480 Accessories Check the supplied accessories before using this system 1 Remote control witha 1 IR Blaster 2 Wall mount brackets battery K2ZZ02C00007 RMQ2281A RMQ2281B N2ZQAYC000098 2 AC mains leads 2 Screws K2CT2YY00097 XYN5 J14F JK Product numbers are correct as of December 2013 These may be subject to change The supplied AC mains lead is for use with this system only Do not use it with other equipment Also do not use cords from other equipment with this system RQT9917 5 Precautions Before use ke 3 O d Q O Operations Reference Control reference guide This system Front wuts 8 PARING Main unit WIRELESS LINK Active subwoofer 1 Standby on switch I 4 Select the Bluetooth device as the source Press to switch the unit from on to standby gt 21 mode
14. ark Y on the body of the fuse If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced If you lose the fuse cover the plug must not be used until a replacement cover is obtained A replacement fuse cover can be purchased from your local dealer Before use Remove the connector cover How to replace the fuse The location of the fuse differ according to the type of AC mains plug figures A and B Confirm the AC mains plug fitted and follow the instructions below Illustrations may differ from actual AC mains plug 1 Open the fuse cover with a screwdriver x Figure B Figure A a Fuse cover RQT9917 3 2 S Q S S D ws oO Table of contents Safety DIFECAUllONS eria aea a aE a AE aaa 2 Caution for AC Mains Le ad u cccccsccecsecessecussecuseucuecusaucusuausaeeusaesaeausaeeuseaess 3 Before use SOUND ONS GL TEMS aao rri 5 This System SCAB 4 86 saai a e A a aaa a AEE 5 PACCOSSONICS crane nn a a a a ere e a eE 5 Controlreference gulde raa aaa a E 6 THS SYSIEMAFTONT risora on a a O wa emaein 6 ThS System Rear ai a AE 7 PREMIOLS CONEOL cciiss nas antutemdvacinbinancnietecactbinalonieted nou E E S 8 Getting started SLEPT COMMOCUOINS cinio N 9 Connection WATE TG TV sicaire ate E E E EE AE E 9 Connection from an HDMI compatible device 0 cecccceececeeececeeeeceeeeesseeeeseeeeeseeessaeeees 10 Connection toa 4K Ultra AD TV eescs care
15. atically turn the main unit on e You can control the volume setting of this system using the volume or mute button on the TV remote control e f you turn off the main unit TV speakers will be automatically activated Audio will automatically be output from this system if the TV is compatible to VIERA Link HDAVI Control 4 or later TV TV speakers are active e The volume of this system is set to its minimum E Automatic input switching When the following operations are performed the main unit will automatically change the input to the corresponding source When play starts on an HDMI connected device When the TV input or the TV channel is changed x3 If the speaker output setting on the TV is set to this system the TV and the main unit turn on automatically Power on link E Power off link When the TV is turned off the main unit also turns off automatically This function does not work when Bluetooth is the source E Automatic lip sync function for HDAVI Control 3 or later Delay between audio and video is automatically adjusted by adding time lag to the audio output enabling you to enjoy smooth audio for the picture LL The delay information is automatically set if the TV is compatible to VIERA Link HDAVI Control 3 or later and the VIERA Link is set to on RQT9917 25 72 S 2 Q Troubleshooting Before requesting service make the following checks I
16. belled HDMI ARC If not connect using the optical digital audio cable gt 9 10 f the main unit is connected to a Panasonic TV and turned on using the button on the main unit or the remote control sound might not be output from this system In this case turn the main unit on using the TV s remote control 25 e f the connections are correct there might be a problem with the cables Redo the connections with different cables Check the audio output settings on the connected device The dual audio cannot be changed from main to secondary If the audio received from the connected device is not Dolby Dual Mono or the output setting is not Bitstream the setting cannot be changed from this system Change the setting on the connected device The volume is lowered when the main unit is turned on VOL LIMITATION is on If the main unit is turned off with the volume setting in the greater half above 50 the main unit will automatically lower the volume to the middle 50 when the main unit is turned on gt 24 Q Q 5 S w aa The dialog is too persistent or the dialog does not sound natural This system has a function to make the dialog stand out when the volume is low 23 RQT9917 27 There is no audio The power of the main unit turns off automatically When the main unit detects a problem a safety measure is activated and the main unit automatically swi
17. connections are changed after a power failure or after the AC mains lead has been removed VIERA Link operations may not function properly Turn on all the devices that are connected to the TV with an HDMI cable and then turn the TV on Turn off the VIERA Link settings of the TV and turn it on again For details refer to the operating instructions for the TV While the main unit and the TV are connected with the HDMI cable turn on the TV and then remove the main units AC mains lead and reconnect it again The first few seconds of audio cannot be heard when using the HDMI connection This may occur during DVD Video chapter playback Change the digital audio output setting on the connected device from Bitstream to PCM When operating an HDMI compatible device of a different brand the main unit reacts in an unwanted manner HDAVI Control commands may use a different signal depending on the brand of the device In this case turn VIERA Link off gt 24 When the main unit is turned on or off audio and video are temporarily disabled When the main unit is turned on or off it is normal for the audio and video to be temporarily disabled This is not a malfunction This can occur when the device it is connected to via HDMI does not support Panasonic s VIERA Link feature HDAVI Control 3 or later Bluetooth Pairing cannot be done Check the Bluetooth device condition The device cannot be conne
18. cted The pairing of the device was unsuccessful or the registration has been replaced Try pairing the device again gt 19 This system might be connected to a different device Disconnect the other device and try pairing the device again The device is connected but audio cannot be heard through this system For some built in Bluetooth devices you have to set the audio output to SC HTB480 manually Read the operating instructions for the device for details The sound is interrupted The device is out of the 10 m communication range Bring the Bluetooth device closer to the main unit e Remove any obstacle between the main unit and the device e Other devices that use the 2 4 GHz frequency band wireless router microwaves cordless phones etc are interfering Bring the Bluetooth device closer to the main unit and distance it from the other devices Select MODE1 for stable communication gt 24 The One Touch Connection NFC feature is not working Make sure the main unit and the NFC feature of the device are turned on 20 Sound No sound or image e Turn muting off gt 21 Check the connections to the other devices gt 9 10 e Make sure that the received audio signal is compatible with this system gt 30 e Turn this system off and then on again f the main unit is connected to the TV with only an HDMI cable make sure that the TV s HDMI terminal is la
19. ctions Active subwoofer wireless connection Preparation Turn on the main unit ala Press HQ ml Active subwoofer on off button E Use this button to turn the active subwoofer on and off m The active subwoofer is on Bd The active subwoofer is off The active subwoofer will still consume a small amount of power even when it is turned off HL B Check that the wireless link is activated WIRELESS LINK WIRELESS LINK indicator Lights red The wireless link is not activated Lights green The wireless link is activated Blinks green The active subwoofer is trying to activate the wireless link with the main unit LE The wireless link will be activated when the main unit and the active subwoofer are both turned on Bluetooth connection By using the Bluetooth connection you can listen to the sound from the Bluetooth audio device from this system wirelessly e Refer to the operating instructions of the Bluetooth device for further instruction on how to connect a Bluetooth device Preparation Turn on the Bluetooth feature of the device and place the device near the main unit Precautions Bluetooth pairing d Press to select BLUETOOTH e f PAIRING is indicated on the display go to step 3 B Press and hold until PAIRING is indicated on the display J Select SC HTB480 from the Bluetooth
20. emote control signal sensor is working by the following operation Press and hold INPUT on the main unit for more than 4 sec ON TABLE or ON WALL is indicated on the display for 4 sec Refer to page 8 About remote control signal sensor for the remote control signal sensor location 2 6 RQT9917 The main unit is automatically switched to standby mode AUTO POWER DOWN function is on The main unit will automatically switch to standby mode when no signal is input and no operation is performed for approx 20 minutes Refer to page 24 to turn this function off The main unit is turned off when the TV s speakers are selected in the speaker control This is a normal feature when using VIERA Link HDAVI Control 4 or later Please read the operating instructions for the TV for details about its power save feature gt 25 This system does not operate correctly If the HDMI cable is connected to the wrong terminal HDMI AV IN or HDMI AV OUT this system will not operate correctly Turn the main unit off disconnect the AC mains lead and reconnect the HDMI cable s gt 9 10 VIERA Link related operations no longer function properly Check the VIERA Link setting on the connected devices Turn on VIERA Link function on the connected devices Select this system as the speaker in the TV s VIERA Link menu Have you turned the VIERA Link settings off gt 24 When the HDMI
21. ent damage or scratches lay down a soft cloth and perform the assembly on it The active subwoofer When carrying the active subwoofer Do not hold the active subwoofer from this opening The parts inside may get damaged Always hold the bottom of the active subwoofer when moving it i 4 Wireless interference To avoid interference maintain the following distances between the main unit active subwoofer and other electronic devices that use the same radio frequency 2 4 GHz band Main unit active subwoofer Wireless router cordless phone and other electronic devices approx 2 m RQT9917 1 3 Precautions 3 8 74 te S lt 9 Selecting the placement method Choose a placement method that suits you best When placing the main unit in a rack or on a table e Place the main unit on a flat eeee and horizontal surface When attaching the main unit to a wall e Place the main unit on a oooo flat and vertical surface E When placing the main unit in front of the TV The main unit may block or interfere with the TV s various sensors C A T S Contrast Automatic Tracking System sensor remote control sensor etc and the 3D Eyewear transmitters on a 3D compatible TV e f interference occurs move the main unit further away from the TV If the TV still does not function correctly try using it in a rack or in the wall mount position E Ifthe TV s rem
22. er accessory and consumable items for your product with ease and confidence by phoning our Customer Communications Centre Monday Friday 9 00 am 5 00 pm Excluding public holidays Or go on line through our Internet Accessory ordering application at www pas europe com e Most major credit and debit cards accepted All enquiries transactions and distribution facilities are provided directly by Panasonic UK t couldn t be simpler e Also available through our Internet is direct shopping for a wide range of finished products Take a browse on our website for further details EU Manufactured by Panasonic Corporation Kadoma Osaka Japan Importer for Europe Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15 22525 Hamburg Germany Panasonic Corporation En Web Site http panasonic net RQT9917 1B FO0114SB1024 Panasonic Corporation 2014
23. etting within the VIERA Link setting items choosing this system as the default speaker will automatically change the speaker selection to this system JER e VIERA Link HDAVI Control based on the control functions provided by HDMI which is an industry standard known as HDMI CEC Consumer Electronics Control is a unique function that we have developed and added As such its operation with other manufacturers equipment that supports HDMI CEC cannot be guaranteed This unit supports HDAVI Control 5 function HDAVI Control 5 is the standard for Panasonic s HDAVI Control compatible equipment This standard is compatible with Panasonic s conventional HDAVI equipment e Please refer to individual manuals for other manufacturers equipment supporting VIERA Link function What you can do with VIERA Link HDAVI Control To make sure that the audio is output from this system turn the main unit on by using the TV s remote control and selecting home cinema from the speaker menu of VIERA Link menu The availability and function of the settings may vary depending on the TV Refer to the operating instructions for the TV for details E Speaker control You can select whether audio output is from this system or the TV speakers by using the TV menu settings Home cinema This system is active e When the main unit is in standby mode changing the TV speakers to this system in the VIERA Link menu will autom
24. f you are in doubt about some of the check points or if the solutions indicated in the following guide do not solve the problem consult your dealer for instructions To return to the factory preset While the main unit is on press and hold 09 1 on the main unit for more than 4 sec RESET is indicated on the display when this system is reset If this system does not operate as expected returning the settings to the factory preset may solve the problem The remote control code will return to REMOTE 1 when this system is returned to the factory preset To change the remote control code refer to page 20 General operation No power e Unplug the AC mains lead for 10 sec before plug in again e After turning the main unit on if the main unit immediately turns off unplug the AC mains lead and consult your dealer f the main unit does not turn on by turning on TV HDAVI control turn on the main unit manually If the problem persists refer to HDMI in Troubleshooting The remote control does not work properly The battery is depleted Replace it with a new one gt 8 It is possible that the insulation sheet has not been removed Remove the insulation sheet gt 8 t may be necessary to set the code of the remote control again after changing the battery of the remote control 20 e Use the remote control within the correct operation range gt 8 Check which r
25. he main unit will be turned on automatically when you connect a paired Bluetooth device BLUETOOTH STANDBY 24 RQT9917 Linked operations with the TV VIERA Link HDAVI Control What is VIERA Link HDAVI Control VIERA Link HDAVI Control is a convenient function that offers linked operations of this system and a Panasonic TV VIERA under HDAVI Control You can use this function by connecting the equipment with an HDMI cable See the operating instructions for connected equipment for operational details Preparation Confirm that the HDMI connection has been made gt 9 10 2 Set the HDAVI Control operations on the connected equipment e g TV 3 For the optimal HDAVI Control operations change the following settings on the connected TV e Set the default speaker settings to this system e Set the speaker selection settings to this system 4 Turn on all HDAVI Control compatible equipment and select the TV s input for this system so that the HDAVI Control function works properly Ifa device is connected to the HDMI AV IN terminal start play to check that the picture is displayed on the TV correctly When the connection or settings are changed repeat this procedure x1 The availability and function of the settings may vary depending on the TV Refer to the operating instructions for the TV for details x2 If the TV has a default speaker s
26. ing a connection Preparation Turn on the NFC feature of the device e Android device version lower than 4 1 requires the installation of the app Panasonic Music Streaming free of charge 1 Enter Panasonic Music Streaming in the search box of Google Play to search and then select Panasonic Music Streaming 2 Start the app Panasonic Music Streaming on the device Follow on screen instructions on your device Always use the latest version of the app EP Press to select BLUETOOTH Touch and hold your device on the NFC touch area of the main unit amp gt 6 Do not move the Bluetooth device until it beeps displays a message or reacts in some way Once the Bluetooth device has reacted move the device away from the main unit eWhen the registration and connection of the Bluetooth device is complete the name of the connected device is indicated on the display for a few seconds e The location of the NFC touch area differs depending on the device When a connection cannot be established even if your Bluetooth device has touched the NFC touch area of the main unit change the position of the device The condition may also improve if you download the dedicated app Panasonic Music Streaming and start it up 8 Start playback on the Bluetooth device L e f you touch another device to the main unit you can update the Bluetooth connection The previousl
27. ive subwoofer 180 mmx408 mmx 306 mm Mass Main unit For table top layout Approx 2 5 kg For wall mounting layout Approx 2 6 kg Active subwoofer Approx 5 0 kg Operating temperature range 0 C to 40 C Operating humidity range 20 to 80 RH no condensation LL x1 When the other connected devices are turned off SPEAKER SECTION Front speakers Built in Full range 6 5 cm cone type X 1 ch Active subwoofer Woofer 16 cm cone type x1 WIRELESS SECTION Wireless module Frequency Range 2 40335 GHz to 2 47735 GHz No of channels 38 Disposal of Old Equipment and Batteries Bluetooth SECTION Bluetooth system specification Bluetooth Ver 3 0 Wireless equipment classification Class 2 Supported profiles A2DP Operating frequency 2 4 GHz band FH SS Operating distance 10 m Line of Sight L Specifications are subject to change without notice e Mass and dimensions are approximate Total harmonic distortion is measured by a digital spectrum analyzer Only for European Union and countries with recycling systems These symbols on the products packaging and or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste For proper treatment recovery and recycling of old products and used batteries please take them to applicable collection points in accordance with your national legislation By disposing of them correctly you
28. l be sent to the TV connected to the HDMI AV OUT terminal the sound will not be output from this system E 3D compatibility Compatible with FULL HD 3D TV and Blu ray Disc player e The main unit can pass through the 3D video signal from a 3D compatible Blu ray Disc player to a FULL HD 3D TV LL e Refer to the operating instructions of the connected HDMI compatible device for the necessary setting to output the video and audio signals 1 0 RQT9917 Connection to a 4K Ultra HD TV This system cannot pass through the 4K content of a 4K compatible equipment to a 4K Ultra HD TV However you can connect the system to a 4K Ultra HD TV to enjoy the 4K content Connect both ends to ARC compatible HDMI terminals 4K compatible e g Blu ray Disc player 4K compatible HDMI OUT AV OUT TV ARC HDMI cable L e Refer to the operating instructions of the 4K Ultra HD TV VIERA and the 4K 60p compatible equipment for setup and for playing the 4K content To enjoy multi channel output from this system set the audio output of other equipment to Bitstream The audio signal input to this system is up to 5 1 channels 3 8 7 dS Q I Using the IR Blaster With the IR Blaster connection it is possible to send the IR signal received by this system s remote control signal sensor to the TV s sensor Use the TV s remote cont
29. or vice versa In standby mode the unit NFC touch area 20 is still consuming a small amount of power Remote control signal sensor 2 gt 8 2 Adjust the volume of this system gt 21 Display 9 Select IMPUE SOUCA S 21 WIRELESS LINK indicator 19 TV BD DVD BLUETOOTH e ae eee Pe CO N O1 6 RQT9917 This system Rear Y D S L 2 D aa Active subwoofer Ir SYSTEM terminal gt 11 12 USB port for service use only AC IN terminal 9 12 Active subwoofer on off button gt 19 1 HDMI AV IN BD DVD terminal gt 10 2 HDMI AV OUT TV ARC terminal ARC compatible gt 9 10 3 OPTICAL DIGITAL AUDIO IN TV terminal gt 10 NOOO x The I D SET button is only used when the main unit is not paired with the active subwoofer gt 28 RQT9917 T Remote control E Before using for the first time Remove the insulation sheet Peai E To replace a button type battery Battery type CR2025 Lithium battery 1 Turn the main unit on or off gt 21 Select the input source 9 21 TV gt BD DVD gt BLUETOOTH l 3 Select the setup menu 24 4 Select the sound menu gt 22 5 Select the Bluetooth device as the source e Set the button type battery with its mark gt 21 l facing upward 6 Adjust the volume of this system gt 21
30. ote control sensor is blocked by the main unit Try using the TV s remote control from a different angle If the problem persists you can use the supplied IR Blaster to relay the signal to the TV gt 11 12 LI e Place the active subwoofer within a few meters of the main unit and in a horizontal position with the top panel facing upward e Do not use the main unit or the active subwoofer in a metal cabinet e Placing the active subwoofer too close to the walls and corners can result in excessive bass Cover walls and windows with thick curtains e f irregular colouring occurs on your TV turn the TV off for about 30 minutes If it persists move the main unit and active subwoofer further away from the TV Keep magnetised items away Magnetised cards watches etc can be damaged if placed too close to the main unit and active subwoofer 1 4 RQT9917 When placing the main unit in a rack or on a table Additionally required accessories commercially available Fall prevention cord ccececcaccuecressencecuneastaouensaensaenensenpesaceantnbenacsnmicateeeanesanseanbenuntescenaciaeaanbennebesaacusbesue e Screw eyes to attach the fall prevention cord LN e Use commercially available screws that are capable of supporting over 26 kg e Use a cord that is capable of supporting over 26 kg with a diameter of about 1 5 mm ED Attach the cord to the main unit Precautions Cord x If the cord cannot be threaded through
31. rest of power conservation if you will not be using this system for a long time unplug it from the household mains socket Saving energy The main unit is designed to conserve its power consumption and save energy The main unit will automatically switch to standby mode when no signal is input and no operation is performed for approx 20 minutes Refer to page 24 AUTO POWER DOWN to turn this function off 1 2 RQT9917 Step 2 Placement Safety Precautions Professional installation is required The installation should never be done by any other than a qualified installation specialist PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND OR SERIOUS INJURY INCLUDING DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING e Be sure to install the main unit as indicated within this operating Instructions e Attach using techniques suited to the structure and materials of the installation location Caution e This system is to be used only as indicated in these instructions Failure to do so may lead to damage to the amplifier and or the speaker and may result in the risk of fire Consult a qualified service person if damage has occurred or if you experience a sudden change in performance e Do not attempt to attach the main unit to a wall using methods other than those described in this manual LL e Do not hold the main unit in one hand to avoid injury you may drop the main unit when carrying it To prev
32. rol within the operation range of this system s remote control signal sensor e For the operation range refer to page 8 d Connect the jack plug to the main unit s Ir SYSTEM terminal Infrared emitter RQT9917 1 1 B Place the infrared emitter in sight of the TV s remote control signal sensor e For the location of the TV s remote control signal sensor refer to the operating instructions for the TV 3 Aim the TV s remote control at this system s remote control sensor and operate the TV e For the location of this system s remote control signal sensor refer to page 8 Make sure to clean the surface where the adhesive tape is to be attached e f you peel off the adhesive tape the surface may become damaged and exposed adhesive may remain Once you have confirmed the TV is operating correctly secure it by attaching the adhesive tape LL e The supplied IR Blaster is only compatible with Panasonic TVs E Placement example On the rear of the main unit Adhesive tape supplied TV remote control signal sensor K AC mains lead connection e Connect only after all other connections are completed Toa household mains socket AC mains lead supplied This system consumes a small amount of AC power 30 even when it is turned off In the inte
33. source Linear pulse code PCM MULTI modulation is the audio source 2 channel pulse code modulation is the audio Source RQT9917 23 Operations Setup menu EP Press SETUP repeatedly to select the setup item B Press A V repeatedly to select the desired setting and then press OK Dims the display after 5 seconds of inactivity ON OFF The main unit automatically is turned off if there is no audio input and when you do not use it for approx 20 minutes ON OFF Sets the volume limit to 50 when you turn on the main unit although the volume is set to above 50 before it is turned off ON OFF LC VOL LIMITATION Change the Bluetooth connection link mode to suit the connection type Make sure to disconnect the current connected device BLUETOOTH READY is indicated on the display MODE 1 Emphasis on connectivity MODE 2 Emphasis on sound quality Turn on the VIERA Link function ON OFF Select OFF when your HDAVI Control device does not work correctly with this system ARC will be disabled Connect an optical digital audio cable Turn off all connected devices and then turn them on again after changing the setting e The default setting is underlined Changed settings will be This function allows you to kept until it is changed again unless otherwise indicated connect a paired Bluetooth device when the main unit is in standby mode ON OFF T
34. source On the TV and the connected device Select the TV s input for this system and start the playback on the connected device E To adjust the volume of this system Press VOL e Volume range 0 to 100 E To mute the sound Press MUTE While muting MUTE is indicated on the display e To cancel press the button again or adjust the volume e Muting is cancelled if the main unit is turned off LL If this system does not operate as expected or sound is unusual returning the settings to the factory preset may solve the problem gt 26 e f there is sound coming out of the TV s speakers reduce the volume of the TV to its minimum 3 8 74 te lt 9 Operations RQT9917 2 1 3D sound Sound menu This system provides a feeling that the sound and the image are as one To change the applied effect refer to Sound ala Press SOUND repeatedly to select the sound effect menu right B Press A V repeatedly to select e g Image of 3D sound field the desired setting and then press OK STANDARD Best suited for dramas and comedy shows STADIUM Produces a realistic sound for live sports broadcasts MUSIC Enhance the sound of musical instruments and songs CINEMA Produces three dimensional sound unique to movies NEWS Enhance the voice With this effect you can enjoy of news and sports oe Dolby Virtual surround sound effect AP
35. t 23 22 RQT9917 3D CLR DIALOG DUAL AUDIO LOW VOL MODE My Enhance the harmonic bass effect ON OFF The 3D Clear Mode Dialog feature creates a sound field similar to the sound coming from a TV screen and makes dialogues clearer ON 3D Surround Clear Mode Dialog and Dolby Virtual Speaker effect OFF Dolby Virtual Speaker effect The setting is set back to ON every time you turn the main unit on Sets the preferred audio channel mode when there are two audio modes received by this system M1 Main M2 Secondary M1 M2 Main Secondary This effect only works if the audio output of the TV or player is set to Bitstream and Dolby Dual Mono is available in the sound source Auto gain control prevents sudden loud sound by reducing the sound level automatically when the input is too high This function is suitable for TV broadcast that has sound level difference ON OFF If the sound becomes unnatural select OFF Enhance the dialog in low volume condition ON OFF Select OFF to cancel this effect if the dialog does not sound natural in low volume condition The default setting is underlined Changed settings will be kept until it is changed again unless otherwise indicated Audio format You can view the current audio format Press and hold SOUND for more than 4 sec DOLBY Dolby Digital is the audio DIGITAL source os DTS is the audio
36. tches to standby mode There is a problem with the amplifier Is the volume extremely high If so lower the volume Is this system placed in an extremely hot place If so move this system to a cooler place and wait a few moments and then try to turn it on again If the problem persists confirm the display turn this system off remove the AC mains lead cord and consult your dealer Please be sure to remember the display that was indicated and inform the dealer Main unit displays F61 There is a problem with the amplifier of the system e Disconnect the AC mains lead and consult the dealer F70 HDMI e Check HDMI connection e Turn off the main unit and then switch it on again e Disconnect the HDMI cable E76 There is a problem with the power supply e Disconnect the AC mains lead and consult the dealer 2 8 RQT9917 Active Subwoofer No power Ensure the AC mains lead of the active subwoofer is connected properly After turning the subwoofer on it immediately turns off Unplug the AC mains lead and consult your dealer No sound from the subwoofer Check that the active subwoofer is turned on Check that the WIRELESS LINK indicator lights green gt 19 The WIRELESS LINK indicator lights red There is no link between the main unit and the active subwoofer Check that the main unit is turned on Turn the active subwoofer off and then back on
37. tissues or other materials towels etc that can fall apart Small grains may get stuck inside the speaker cover Never use alcohol paint thinner or benzine to clean this system Before using chemically treated cloth carefully read the instructions that came with the cloth E To dispose or transfer this system This system may keep the user settings information in the main unit If you discard the main unit either by disposal or transfer then follow the procedure to return all the settings to the factory presets to delete the user settings 9 26 To return to the factory preset The operation history may be recorded in the memory of the main unit Licenses Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories Manufactured under license under U S Patent Nos 5 956 674 5 974 380 6 487 535 amp other U S and worldwide patents issued amp pending DTS the Symbol amp DTS and the Symbol together are registered trademarks amp DTS Digital Surround and the DTS logos are trademarks of DTS Inc Product includes software DTS Inc All Rights Reserved HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries HDAVI Control is a trademark of Panasonic Corporation The Bluetooth word mark and logos are owned by the Bl
38. uetooth SIG Inc and any use of such marks by Panasonic Corporation is under license Other trademarks and trade names are those of their respective owners Google Play and Android are trademarks of Google Inc Q O 5 S w aa RQT9917 29 Specifications AMPLIFIER SECTION RMS output power Dolby Digital Mode Front ch L R ch 60 W per channel 6 Q 1 KHz 10 THD Subwoofer ch 130 W per channel 8 Q 100 Hz 10 THD Total RMS Dolby Digital mode power 250 W TERMINAL SECTION HDAVI Control This unit supports HDAVI Control 5 function HDMI AV input BD DVD 1 Input connector Type A 19 pin HDMI AV output TV ARC 1 Output connector Type A 19 pin Digital audio input TV Optical digital input Optical terminal Sampling frequency 32 kHz 44 1 kHz 48 kHz 88 2 kHz 96 kHz only LPCM Audio format LPCM Dolby Digital DTS Digital Surround IR Blaster Terminal Type 3 5 mm jack USB Port For service use only 30 RQT9917 GENERAL Power consumption Main unit 34 W Active subwoofer 23 W In standby condition Main unit When BLUETOOTH STANDBY is OFF Approx 0 48 W When BLUETOOTH STANDBY is ON Approx 3 W Active subwoofer Power switch off Approx 0 25 W The wireless link is not activated Approx 1 3 W Power supply AC 220 V to 240 V 50 Hz Dimensions WxHxD Main unit For table top layout 950 mm X53 mmx 110 mm For wall mounting layout 950 mmx 110 mmx57 mm Act
39. will help to save valuable resources and prevent any potential negative effects on human health and the environment For more information about collection and recycling please contact your local municipality Penalties may be applicable for incorrect disposal of this waste in accordance with national legislation Note for the battery symbol bottom symbol This symbol might be used in combination with a chemical symbol In this case it complies with the requirement set by the Directive for the chemical involved C 0682 Declaration of Conformity DoC Hereby Panasonic Corporation declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC Customers can download a copy of the original DoC to our R amp TTE products from our DoC server http Awww doc panasonic de Contact to Authorised Representative Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15 22525 Hamburg Germany This product is intended for general consumer Category 3 RQT9917 3 1 Q Q 5 o w aa Sales and Support Information Customer Communications Centre e For customers within the UK 0844 844 3899 e For customers within Ireland 01 289 8333 e Monday Friday 9 00 am 5 00 pm Excluding public holidays e For further support on your product please visit our website www panasonic co uk Direct Sales at Panasonic UK Ord
40. y connected device will be disconnected automatically e When the connection is established playback may start automatically depending on the type of device being used e The One Touch Connection may not work properly depending on the type of device being used 2 0 RQT9917 Remote control code When other Panasonic devices respond to this system s remote control change the remote control code on this system and the remote control Preparation Turn off all other Panasonic products Turn on the main unit E To set the code to REMOTE 2 Press and hold MUTE and OK for more than 4 sec REMOTE 2 is indicated on the display E To set the code to REMOTE 1 Press and hold MUTE and F for more than 4 sec REMOTE 1 is indicated on the display Using this system Preparation Turn on the active subwoofer Turn on the TV and or connected device ome yo lt voL z ED C TD EP Press to turn on the main unit B Select the source Press To selest INPUT Ty gt BD DVD t_ BLUETOOTH BLUETOOTH e This remote control cannot be used to control the operations of the connected devices E When BLUETOOTH is selected as the source On the Bluetooth device Select this system as the output source of the connected Bluetooth device and start the playback E When BD DVD is selected as the
Download Pdf Manuals
Related Search