Operating Instructions Crimp Height Measuring Device
Contents
1. E Schleuniger To Be Precise Operating Instructions CHM Crimp Height Measuring Device Edition 1 09 2006 Schleuniger CHM Da Table of Contents 1 General Information 3 1 1 Explication of Symbols 3 1 2 Product Description 3 1 3 Technical Information 3 2 Operation Instructions 4 3 Dial Gage 3 1 Operation 5 4 Overview of the System 5 Schleuniger 2006 Version 1 09 2006 Schleuniger CHM 29 1 General Information 1 1 Explication of Symbols Ee This symbol refers to tips and tricks of the Technical Service Center It further includes other information to be observed 1 2 Product Description The KMF CHM is designed for measuring the crimp height of wire as well as insulation crimps The measuring contacts of this device were developed especially for this purpose The contacts are provided with a spring which ensures a constant pressure during the measurement A constant measurement is thereby guaranteed irrespective of the user 1 3 Technical Information Operating voltage 5V DC 40 mA Dimensions 155 mm L x 125 mm W x 235 mm H Weight Approx 3 500 g Interface RS232 Real time clock Mitutoyo 543 691B Digimatic 0 001 mm Schleuniger 2006 Version 1 09 2006 Schleuniger CHM 4 2 Operating Instructions It is to be ensured that the crimp height measurements are effected correctly The crimp height measuring device includes a flat contact blade on the one side and a2. play counts up and the reverse mode in case of which the display counts down REV Make sure that the gage is always in the normal mode e By pressing the ORIGIN key longer than 1 second the zero point is set at the current position Schleuniger 2006 Version 1 09 2006 Schleuniger CHM 6 4 Overview of the System Real time clock Lever Upper precise contact Lower blade contact Schleuniger 2006 Version 1 09 2006
3. precise contact on the other The precise contact serves the avoidance of faulty measurements in case of objects which are soiled with burr Normal callipers would also measure the burr entailing a falsification of the measuring result Measured crimp height Correct crimp height The measuring object is to be positioned in a way that the side of the crimp which is rolled in is diagonal to the blade contact and at right angles to the edge of the lower contact Furthermore the object is to be placed horizontally on the edge Tilted objects may falsify the measuring result The upper precise contact is to be positioned exactly in the middle of the crimp in order to measure the highest point of the crimp If the upper contact is not placed exactly in the middle of the crimp area the measuring result may be falsified Upper contact placed in the Contact blade middle of the crimp area Crimp area The side of the crimp which is rolled in is placed flatly on the lower contact Upper a Lower contact The object must be at right angles to the edge of the lower contact and rest on C it horizontally The upper contact point is to be positioned exactly in the middle of the crimp Schleuniger 2006 Version 1 09 2006 Schleuniger CHM 5 3 Dial Gage 3 1 Operation e Switch on the gauge by actuating the ON OFF button e By means of the keys you can switch between the normal mode in case of which the dis
Download Pdf Manuals
Related Search