OPERATING INSTRUCTIONS
Contents
1. If you plan to store the worklight e g for emergencies we recommend that the battery is fully charged before doing so this will ensure the longest possible battery life Never abuse the charger cable or yank the cable to disconnect it Keep the cable away from sharp edges hot surfaces Never point the light directly at the face of another person or an animal AC CHARGING l 2 Connect the AC charging adaptor to the charging jack of the worklighf Connect the other end of the charger to the 230v mains power supply and charge for approximately 1 hour he worklight must NOT be operated when using the AC charger Parts amp Service 020 8988 7400 E mail Parts clarkeinternational com or Service clarkeinternational com DC CHARGING 1 Connect the DC charging adaptor to the charging jack of the worklight 2 Connect the other end of the charger to the vehicle cigarette lighter socket and charge for approximately one hour OPERATION 1 Press the on off button to switch on the worklight Up to 3 hours of light can be obtained before the batteries are drained 2 Press the on off button again to switch the worklight off Attach the worklight to a suitable support using the folding hook or attach to a ferrous metal surface using the magnetic retainer 4 Never shine the light directly into anyones eyes CLEANING To keep your worklight clean wipe with a damp cloth only DO NOT use detergents ch2. Model No RWL30 Part No 4002830 OPERATING INSTRUCTIONS cc x DECLARATION OF CONFORMITY ie l Clarke INTERNATIONAL Hemnall Street Epping Essex 16 4LG DECLARATION OF CONFORMITY This is an important document and should be retained We hereby declare that this product s complies with the following directive s 2004 108 EC Electromagnetic Compatibility Directive 2006 95EC Low Voltage Equipment Directive 2002 95 EC Restriction of Hazardous substances The following standards have been applied to the product s BS EN 61588 2 6 2009 BS EN 61558 1 2005 A1 2009 EN 55015 2006 EN 61547 1995 A1 2000 EN 6100 3 2 2006 EN 61000 3 3 1995 A 1 2001 4 2005 The technical documentation required to demonstrate that the product s meets the requirement s of the aforementioned directive s has been compiled and is available for inspection by the relevant enforcement authorities The CE mark was first applied in 2006 Product Description 30 LED Rechargeable Worklight Model number s RWL30 Serial batch Number Date of Issue 28 06 2011 Signed bk 4 A Clarke Director 10 0364 LED WRK LGT DOC Page af larke e Parts amp Service 020 8988 7400 E mail Parts clarkeinternational com or Service clarkeinternational com INTRODUCTION Thank you for purchasing this CLARKE product Before using the worklight be sure to read these instructions thoroughly In doin
3. emicals or harmful abrasives Never immerse in water ENVIRONMENTAL PROTECTION Do not dispose of this product with general household waste All tools X accessories and packaging should be sorted taken to a recycling centre and disposed of according to the laws governing Waste mam Electrical and Electronic Equipment A SELECTION AIR COMPRESSORS WOODWORKING From DIY to industrial Plus air tools Saws sanders lathes mortisers spray guns and accesories and dust extraction GENERATORS HYDRAULICS Prime duty or emergency standby Cranes body repair kits for business home and leisure transmission n for all types of POWER WASHERS Hot and cold electric and engine WATER PUMPS driven we have what you need submersible electric and engine driven WELDERS for DIY agriculture and industry Mig Arc Tig and Spot POWER TOOLS From DIY to auto industrial Angle grinders cordless drill sets saws and sanders METALWORKING Drills grinders and saws for DIY STARTERS CHARGERS and professional use All sizes for car and commercial use Parts amp Service 020 8988 7400 E mail Parts clarkeinternational com or Service clarkeinternational com
4. g so you will ensure the safety of yourself and of others around you and you can look forward to the product giving you long and satisfactory service GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase Please keep your receipt as proof of purchase This guarantee is invalid if the product is found to have been abused or tampered with in any way or not used for its intended purpose Faulty goods should be returned to their place of purchase no product can be returned to us without prior permission This guarantee does not effect your statutory rights PACK CONTENTS 1 x 80 LED Worklight 1 x AC Mains Adaptor Charger Assembly 1 x 12 Volt DC Charging Adaptor car cigarette lighter plug type BATTERY CHARGING AND CARE Always use only the charging adapters supplied The mains charger is for indoor use only The worklight should only be re charged when switched off Never turn the light on while charging as this may damage the unit When charging a low battery using the adaptor charger the red LED beside the charging jack will initially illuminate before changing to the Green LED when the unit is sufficiently charged for continued use The battery must be re charged at least every three months Failure to recharge the battery will lead to reduced performance of the worklight and to premature battery failure Note that the batteries cannot be replaced
Download Pdf Manuals
Related Search