Operating Instructions Home Theater Audio System
Contents
1. x The indicators will also blink in various conditions gt 22 6 VQT5J46 a This system Rear Main unit 8 AC mains lead gt 10 9 Wall mounting hole 10 OPTICAL DIGITAL AUDIO IN terminal 2 9 11 AUDIO IN terminal gt 9 o A 3 L Q 14 Subwoofer MULTI ANGLE switch gt 14 15 Switch the audio quality according to the placement method of the main unit Subwoofer terminal Speaker cable x For service use only VQT5J46 T J Remote control B Before using for the first time Remove the insulation sheet 4 E To replace a button type battery Battery type CR2025 Lithium battery BD DVD 3 PAIRING Turn the main unit on or off 17 Turn the surround effect on or off gt 17 Turn the clear voice effect on or off gt 17 Select the TV as the source 17 Select the BD DVD as the source gt 17 Adjust the output level of the subwoofer bass sound gt 17 Mn Adjust the volume of this system 2 17 e Set the button type battery with its mark Mute the sound e 17 facing upward Select the Bluetooth device as the source gt 17 OahWN ooN B About remote control signal sensor The remote control signal sensor is located on the main unit e Use the remote control within the correct operation range Distance Within approx 7 m directly in front Angle Approx 30 left and right Remote control signal sensor 8 VQT5J462. Step 1 Connections e Turn off all equipment before connection and read the appropriate operating instructions Do not connect the AC mains lead until all other connections are completed Connection with the TV TV z OPTICAL OUT Q9 Optical digital audio cable When you use the optical digital audio cable insert the tip correctly into the terminal Do not bend the optical digital audio cable e The optical input supports PCM only v 2 z e Q D Connection with other devices 3 m E AUDIO OUT o R L D BD DVD z AUDIO IN me m E RED P o wee 2 e g Blu ray Disc player T P Q Audio cable VQT5J46 9 o Speaker cable connection Match the connector shape and connect to the terminal a 9 speaker cable AC mains lead connection Connect only after all other connections are completed Toa household mains socket Q AC mains lead e This system consumes a small amount of AC power gt 23 even when it is turned off In the interest of power conservation if you will not be using this system for a long time unplug it from the household mains socket Saving energy The main unit is designed to conserve its power consumption and save energy e The main unit will
3. x1 CJ Use a cord that is capable of supporting over 10 kg with a diameter of about 2 mm m Slide the MULTI ANGLE switch to WALL MOUNT QO Cord x If the cord cannot be threaded through the holes try bending the cord in 2 locations about 5 mm apart from the tip at an angle of 45 as illustrated above VQT5J46 1 5 Precautions 3 Hs E 7 D 7 0 B Drive a screw into the wall Use the measurements indicated below to identify the screwing positions on the wall Leave at least 20 mm of space above of the main unit to allow enough space for fitting the main unit Leave atleast 10 mm of space on both sides of the main unit Without sufficient space it is not possible to mount the main unit successfully Be sure to use a level to insure that both mounting holes are level to each other Q Atleast 30 mm Q 24 0 mm 27 5 mm to 29 4 mm Q Wall or pillar 7 5mm to 8 5 mm 320mm 15mm 215mm 115mm Q 215mm Wall mounting hole a Fit the main unit securely onto the screw s DO DO NOT Move the speaker so that the screw is in this position In this position the speaker will likely fall if moved to the left or right B Secure the cord to the wall Make sure that the slack of the cord is minimal 9 Screw eye Cord 1 6 VQT5J46 Using this system Preparation Turn on the TV and or c
4. with a diameter of about 2 mm Em Slide the MULTI ANGLE switch to RACK TABLE TOP e Press the AC mains lead into the holder QO Cord x If the cord cannot be threaded through the holes try bending the cord in 2 locations about 5 mm apart from the tip at an angle of 45 as illustrated above E Place the main unit in the desired position and attach the cord onto the rack or table Make sure that the slack of the cord is minimal Do not lean the main unit against the TV or wall Do not place the main unit over the AC mains lead Ensure that the main unit is stable Q Screw eye e Attach at a position capable of supporting over 10 kg eDepending on the placement of the main unit the screwing position of the screw eye may differ 1 4 VQT5J46 i When attaching the main unit to a wall Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg The screws and other items are not supplied as the type and size will vary with each installation Refer to step 3 for details about the required screws Be sure to attach the fall prevention cord as a secondary safety measure Additionally required accessories commercially available Screws for wall rmourtirg rocca rir petet rere eee eere D rece Da ra Ee eR EENKEER ae SER Ede RA x2 Fall prevention COR eC x1 Screw eye to attach the fall prevention cord
5. Surround is a trademark of DTS Inc DTS Inc All Rights Reserved The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Panasonic Corporation is under license Other trademarks and trade names are those of their respective owners amp dts Digital Surround C 0560 Declaration of Conformity DoC Hereby Panasonic Corporation declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC Customers can download a copy of the original DoC to our R amp TTE products from our DoC server http www doc panasonic de Contact to Authorised Representative Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15 22525 Hamburg Germany This product is intended for general consumer Category 3 VQT5J46 21 o o S 2 E it Indicator illumination The indicators display the condition of this system by flashing The indicator patterns illustrated below are displayed during normal operational conditions They do not refer to the indications of a problem Indicator TV BD DVD O ays TV BD DVD TV BD DVD TV BD DVD Description The indicator blinks for 20 sec CLEARVOICE SURROUND When the setting is on Auto Power Down and Bluetooth Stand by 18 The indicator blinks for 20 sec 5 amie SURROUND When the setting
6. again W To mute the sound Press MUTE While muting all the indicators blink simultaneously To cancel press the button again or adjust the volume Muting is cancelled if the main unit is turned off CJ If this system does not operate as expected or sound is unusual returning the settings to the factory preset may solve the problem gt 20 x BD DVD indicator Bluetooth indicator and sound mode indicators blink from left to right or from right to left while adjusting The indicators will not blink when it has reached the maximum or minimum e f there is sound coming out of the TV s speakers reduce the volume of the TV to its minimum e f the main unit is turned off with the volume setting in the greater half above 50 the main unit will automatically lower the volume to the middle 50 when the main unit is turned on Volume limitation To turn this function off refer to page 19 VQT5J46 1 7 Precautions Getting started o S S S a 9 Advanced operations Audio format indicator To display the current audio format Press and hold SURROUND for more than 4 sec The current audio format is indicated for 5 sec CLEAR VOICE indicator blinks Dolby Digital is the audio format SURROUND indicator blinks DTS is the audio format LO Audio format is not indicated when BD DVD or Q is selected as the source Auto Power Down The m
7. is off as Auto Power Down and Bluetooth Stand by gt 18 The indicators blink for 5 sec When the audio format is Dolby Digital gt 18 The indicator blinks for 5 sec CLEARVOICE SURROUND When the audio format is DTS c 18 The indicators blink for 10 sec When the remote control code is changed gt 19 The indicators blink once When changing the setting To turn off the volume limitation gt 19 The indicators blink twice When the main unit is reset gt 20 Bluetooth indicator blinks quickly CLEAR VOICE SURROUND When the main unit is ready for pairing gt 11 Bluetooth indicator blinks slowly When the main unit is waiting to connect gt 11 Bluetooth indicator turns on When the main unit is connected with a Bluetooth device gt 11 3 I Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products packaging and or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste For proper treatment recovery and recycling of old products and used batteries please take them to applicable collection points in accordance with your national legislation By disposing of them correctly you will help to save valuable resources and prevent any potential negative effects on human health and the environment For more inf
8. operations on the main unit if the controls are the same Supplied items Ll This system SC HTB18 1 Main unit Speaker 1 Subwoofer SU HTB18 SB HTB18 i Accessory Check the supplied accessory before using this system 1 Remote control with a battery N2QAYCO000103 CJ Product numbers are correct as of March 2014 These may be subject to change VQT5J46 5 Control reference guide This system Front OM VOL INPUT PARRING Main unit Standby on switch I Press to switch the unit from on to standby mode or vice versa In standby mode the unit is still consuming a small amount of power Adjust the volume of this system gt 17 Select the input source gt 17 TV BD DVD Q Bluetooth T Select the Bluetooth device as the source gt 17 5 6 cae BD DVD QEARVOKE SURROUND D D Subwoofer Input selector indicators TV indicator Lights green when the TV is the audio source BD DVD indicator Lights amber when the device connected to the BD DVD terminal is the audio source Bluetooth indicator Lights amber when the Bluetooth device is the audio source Sound mode indicators B CLEAR VOICE indicator Lights amber when clear voice is the current sound mode SURROUND indicator Lights amber when surround is the current sound mode Remote control signal sensor gt 8
9. to connect or some operations can be different This system supports Bluetooth security features But depending on the operating environment and or settings this security is possibly not sufficient Transmit data wirelessly to this system with caution This system cannot transmit data to a Bluetooth device B Range of use Use this device at a maximum range of 10 m The range can decrease depending on the environment obstacles or interference E Interference from other devices This system may not function properly and troubles Such as noise and sound jumps may arise due to radio wave interference if the main unit is located too close to other Bluetooth devices or the devices that use the 2 4 GHz band This system may not function properly if radio waves from a nearby broadcasting station etc are too strong B Intended usage e This system is for normal general use only Do not use this system near equipment or in an environment that is sensitive to radio frequency interference example airports hospitals laboratories etc VQT5J46 3 S 9 Ez 3 b 9 i Qn Table of contents EIE rm 2 Caution for AC Mains Lead eeeceeeeeeee nennen arii ar uia aa anna 3 About Bl etooth nitet noe Done ricpew rera Co emus aa Da Lor nwep dr Ra RE D UR ER 3 Before use Supplied items DRUSI This system SC HTB18 Pee IE Control reference
10. Panasonic Operating Instructions Home Theater Audio System Model No SC HTB18 C Bluetooth Thank you for purchasing this product Please read these instructions carefully before using this product and save this manual for future use Included Installation Instructions The installation work should be done by a qualified installation specialist gt 12 to 16 Before commencing work carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly Please keep these instructions You may need them when maintaining or moving this unit Model number suffix EB denotes UK model EB VQT5J46 Safety precautions p WARNING Unit To reduce the risk of fire electric shock or product damage Do not expose this unit to rain moisture dripping or splashing Do not place objects filled with liquids such as vases on this unit Use only the recommended accessories Do not remove covers Do not repair this unit by yourself Refer servicing to qualified service personnel To prevent injury this apparatus must be securely attached to the wall in accordance with the installation instructions AC mains lead To reduce the risk of fire electric shock or product damage Ensure that the power supply voltage corresponds to the voltage printed on this unit Insert the mains plug fully into the socket outle
11. ain unit is automatically turned off if there is no audio input and when you do not use it for approx 2 hours E While pressing and holding CLEAR VOICE on the remote control press and hold INPUT on the main unit for more than 4 sec to display the current setting BD DVD indicator blinks Auto Power Down is on Wwa CLEAR VOICE indicator blinks y Auto Power Down is off While the setting is displayed press CLEAR VOICE to select the setting The setting changes each time CLEAR VOICE is pressed The indicator for the selected setting blinks for 20 sec and then exits the setting mode The setting is maintained until it is changed again Default setting of this function is on 1 8 VQT5J46 Bluetooth Stand by This function allows you to connect a paired Bluetooth device when the main unit is in standby mode FK While pressing and holding SURROUND on the remote control press and hold Q on the main unit for more than 4 sec to display the current mode BD DVD indicator blinks Bluetooth Stand by is on CLEAR VOICE indicator blinks Bluetooth Stand by is off While the mode is displayed press SURROUND to select the mode The setting changes each time SURROUND is pressed The indicator for the selected setting blinks for 20 sec and then exits the setting mode The setting is maintained until it is changed again Default setting of this fu
12. automatically switch to standby mode when no signal is input and no operation is performed for approx 2 hours Refer to page 18 Auto Power Down to turn this function off 1 0 VQT5J46 D Bluetooth connection By using the Bluetooth connection you can listen to the sound from the Bluetooth audio device from this system wirelessly Refer to the operating instructions of the Bluetooth device for further instruction on how to connect a Bluetooth device Preparation e Turn on the Bluetooth feature of the device and place the device near the main unit Bluetooth pairing K Press Q to select Q e Ifthe Q indicator flashes quickly go to step 3 Press and hold Q until the indicator flashes quickly e Ifthe 9 indicator flashes slowly repeat step 2 Select SC HTB18 from the Bluetooth device s Bluetooth menu f prompted for the passkey on the Bluetooth device enter 0000 Once the Bluetooth device is connected the 9 indicator stops flashing and lights up CJ You can register 8 or more Bluetooth devices to this unit However when this unit is turned off it can store only up to 8 registered devices If you register 9 or more devices devices with the oldest connection history will be deleted Connecting a paired Bluetooth device K Press Q to select Q e Ifthe 9 indicator lights a Bluetooth device is already connected with this system Dis
13. connect it gt below Select SC HTB18 from the Bluetooth device s Bluetooth menu 3 s E 7 7 7 0 W Disconnecting a Bluetooth device Press and hold Q until the Q3 indicator flashes slowly L1 e When Q is selected as the source this system will automatically try and connect to the last connected Bluetooth device If the connection attempt fails try to establish a connection again The Bluetooth device will be disconnected if a different audio source e g TV is selected This system can only be connected to one device at a time VQT5J46 1 1 Step 2 Placement Safety Precautions Professional installation is required The installation should never be done by any other than a qualified installation specialist PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND OR SERIOUS INJURY INCLUDING DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING Be sure to install the main unit as indicated within this operating Instructions Attach using techniques suited to the structure and materials of the installation location Caution This system is to be used only as indicated in these instructions Failure to do so may lead to damage to the amplifier and or the speaker and may result in the risk of fire Consult a qualified service person if damage has occurred or if you experience a sudden change in performance Do not attempt to attach the main unit to a wall using met
14. ely hot place If so move this system to a cooler place and wait a few moments and then try to turn it on again If the problem persists check if the TV indicator and the BD DVD indicator are blinking first After checking the indicators turn off this system unplug the AC mains lead and consult your dealer Make sure to remember which indicators were blinking and inform the dealer of them Unit care W Clean this system with a soft dry cloth When dirt is heavy wring a cloth moistened in water tightly to wipe the dirt and then wipe it with a dry cloth Never use alcohol paint thinner or benzine to clean this system Before using chemically treated cloth carefully read the instructions that came with the cloth W To dispose or transfer this system This system may keep the user settings information in the main unit If you discard the main unit either by disposal or transfer then follow the procedure to return all the settings to the factory presets to delete the user settings 20 To return to the factory defaults The operation history may be recorded in the memory of the main unit Licenses Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories For DTS patents see http patents dts com Manufactured under license from DTS Licensing Limited DTS the Symbol amp DTS and the Symbol together are registered trademarks and DTS Digital
15. erference occurs move the main unit further away from the TV If the TV still does not function correctly try using it in a rack or in the wall mount position 3 s E 7 57 7 0 W Ifthe TV s remote control sensor is blocked by the main unit Try using the TV s remote control from a different angle L Place the subwoofer within a few meters of the main unit and in a horizontal position with the top panel facing upward Do not use the main unit or the subwoofer in a metal cabinet e Placing the subwoofer too close to the walls and corners can result in excessive bass Cover walls and windows with thick curtains e If irregular colouring occurs on your TV turn the TV off for about 30 minutes If it persists move the main unit and subwoofer further away from the TV Keep magnetised items away Magnetised cards watches etc can be damaged if placed too close to the main unit and subwoofer Keep the main unit approximately 150 mm away from the TV VQT5J46 1 3 a When placing the main unit on a rack or on a table Additionally required accessories commercially available Fall prevention COND ii ertet ete Moves Fin d haee e vU P NR RR ERR E Ede up Er PER uS x1 e Screw eye to attach the fall prevention cord sssssssseeeeeeeenneneneenen nnns x1 Ll Use commercially available screws that are capable of supporting over 33 kg Use a cord that is capable of supporting over 10 kg
16. f you lose the fuse cover the plug must not be used until a replacement cover is obtained A replacement fuse cover can be purchased from your local dealer Before use Remove the connector cover How to replace the fuse The location of the fuse differ according to the type of AC mains plug figures A and B Confirm the AC mains plug fitted and follow the instructions below Illustrations may differ from actual AC mains plug 1 Open the fuse cover with a screwdriver Figure B Fuse cover 2 Replace the fuse and close or attach the fuse cover Figure A Figure B Fuse 5 ampere Fuse 5 ampere About Bluetooth Panasonic bears no responsibility for data and or information that is compromised during a wireless transmission B Frequency band used This system uses the 2 4 GHz frequency band B Certification of this device This system conforms to frequency restrictions and has received certification based on frequency laws Thus a wireless permit is not necessary The action below are punishable by law in some countries Taking apart or modifying the unit Removing specification indications W Restrictions of use Wireless transmission and or usage with all Bluetooth equipped devices is not guaranteed All devices must conform to standards set by Bluetooth SIG Inc Depending on the specifications and settings of a device it can fail
17. guide This system Front This system Rear Remote Control P Getting started Step 1 Connections neret etate rette tr erre edan Pire Oc ea eren eee PORE 9 Connection witbiathie TV e rtr rect ea eov v an ha ev de vede tien 9 Connection with other devices a araia eaaa aa aa aa Aaa ataa aeaa i aa EEEE KAN 9 Speaker cable connection v 10 AC mains lead connection 10 Bluetooth connection tette tette tette tentent 11 Step 2 Placement erui ere cero ite tte Ce e narra ance Tea 2E ra ada n8 d 12 Safety Precautions 12 The subwoofer wee 12 Wireless interference sae 12 Selecting the placement method es 13 When placing the main unit on a rack or on a table we 14 When attaching the main unit to a wall 15 Operations Using this system ecrire reete ent eere rre dents 17 Advanced operatlons 5 reet niaan rinken rein ere rere oed aaan ai men nd 18 Reference Troubles Rootin es 5 2 i le idee den sicnt TENAAAN 20 UNIT CANO eit ETT TAAT Licenses Indicator illumination eeeeecee eee eeeeeeeeeee eee ee eeeeeeeeeeeeeeeeeaeeeseeseeeeeeeeeeneeeees 22 Specifications cre eri ioo e medal is tede eL ERES 23 4 VQT5J46 The illustrations shown may differ from your unit Operations in this operating instructions are described mainly with the remote control but you can perform the
18. hods other than those described in this manual Ll Do not hold the main unit in one hand to avoid injury you may drop the main unit when carrying it To prevent damage or scratches lay down a soft cloth and perform the assembly on it The subwoofer When carrying the subwoofer 9 Do not hold the subwoofer from this opening The parts inside may get damaged Always hold the bottom of the subwoofer when moving it g o Wireless interference To avoid interference maintain the following distances between the main unit subwoofer and other electronic devices that use the same radio frequency 2 4 GHz band Main unit subwoofer Wireless router cordless phone and other electronic devices approx 2 m 1 2 VQT5J46 Selecting the placement method Choose a placement method that suits you best When placing the main unit on a rack or on a table e Place the main unit on a flat eeee and horizontal surface e Place the main unit in front of the TV pedestal Page 14 Precautions When attaching the main unit to a wall e Place the main unit on a ecco J flat and vertical surface Page 15 W When placing the main unit in front of the TV The main unit may block or interfere with the TV s various sensors C A T S Contrast Automatic Tracking System sensor remote control sensor etc and the 3D Eyewear transmitters on a 3D compatible TV e If int
19. ile pressing and holding MUTE on the remote control press and hold VOL on the main unit for more than 4 sec All the indicators will blink once when the volume limitation is turned off Tv BD DVD CLEARVOICE SURROUND ZAS ote We WT L1 To reset the setting return to the factory preset gt 20 VQT5J46 1 9 7 S 9 2 a ie Troubleshooting Before requesting service make the following checks If you are in doubt about some of the check points or if the solutions indicated in the following guide do not solve the problem consult your dealer for instructions To return to the factory defaults While the main unit is on press and hold 05 I on the main unit for more than 4 sec All the indicators will blink twice when this System is reset If this system does not operate as expected returning the settings to the factory defaults may solve the problem The remote control code will return to 1 when this system is returned to the factory preset To change the remote control code refer to page 19 General operation No power Insert the AC mains lead securely gt 10 e If the indicators blink and the main unit turns off immediately after you have turned it on unplug the AC mains lead and consult your dealer The remote control does not work properly The battery is depleted Replace it with a new one gt 8 e It is possible that the ins
20. ings with newspapers tablecloths curtains and similar items Do not expose this unit to direct sunlight high temperatures high humidity and excessive vibration Button type battery Lithium battery e Danger of explosion if battery is incorrectly replaced Replace only with the type recommended by the manufacturer e Insert with poles aligned e Mishandling of batteries can cause electrolyte leakage and may cause a fire Remove the battery if you do not intend to use the remote control for a long period of time Store in a cool dark place Do not heat or expose to flame Do not leave the battery ies in a car exposed to direct sunlight for a long period of time with doors and windows closed e When disposing of the batteries please contact your local authorities or dealer and ask for the correct method of disposal Caution for AC Mains Lead For the AC mains plug of three pins For your safety please read the following text carefully This appliance is supplied with a moulded three pin mains plug for your safety and convenience A 5 ampere fuse is fitted in this plug Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5 ampere and that it is approved by ASTA or BSI to BS1362 Check for the ASTA mark or the BSI mark S on the body of the fuse If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced I
21. nction is off Dimmer mode You can turn off dimmer mode and keep the LED indicators bright While pressing and holding BD DVD on the remote control press and hold VOL on the main unit for more than 4 sec to turn off Dimmer mode The indicator for the current condition will turn brighter The setting is maintained until it is changed again Default setting of this function is on L To turn on dimmer mode repeat the operation above After performing the operation the indicator for the current condition will be dim Others W Remote control code When other Panasonic devices respond to this system s remote control change the remote control code on this System and the remote control Preparation Turn off all other Panasonic products Turn on the main unit Change the remote control code to code 2 1 Aim the remote control at the main unit s remote control sensor 2 Press and hold MUTE and Q on the remote control for more than 4 sec All the indicators will blink for 10 sec when the code of this system is changed e If the main unit does not operate after changing the code repeat steps 1 and 2 To change the remote control code to code 1 repeat the steps above but replace Q with TV W To turn off the volume limitation If a state of the lowered volume disturbs you every time the main unit turns on for example it is possible to turn off this function as follows Wh
22. onnected device eee mo T Press to turn on the main unit Select the source Press To select TV TV BD DVD BD DVD 81 Q Bluetooth This remote control cannot be used to control the operations of the connected devices W When Q is selected as the source On the Bluetooth device Select this system as the output source of the connected Bluetooth device and start the playback W When BD DVD is selected as the source On the TV and the connected device Select the TV s input for this system and start the playback on the connected device W To adjust the volume of this system Press VOL e Volume range 0 to 100 W To adjust the subwoofer level 1 Press SUBWOOFER or SUBWOOFER to display the current level 2 While the level is displayed Press SUBWOOFER or SUBWOOFER to adjust the level Indication Effect level Semmes 4 Highest Ua cd bcd bcd bd BD DVD OQ CLEARVOICE SURROUND 3 mem ene ee IN AN AN BD DVD 3 CLEAR VOICE SURROUND 2 mom wee AN AN BD DVD CLEARVOICE SURROUND S 1 Lowest as E To set the surround mode You can enable disable the surround effect Press SURROUND To cancel press the button again E To set the clear voice mode With the clear voice mode you can hear dialogs clearer Press CLEAR VOICE To cancel press the button
23. onsumption in standby mode Approx 0 5 W Power supply AC 220 V to 240 V 50 Hz Main unit For table top layout Dimensions WxHxD 750 x65 5 x118 mm For wall mounting layout Dimensions WxHxD 750 x115 x65 mm Mass Approx 2 3 kg Subwoofer Dimensions WxHxD 156 x290 x263 mm Mass Approx 3 0 kg Operating temperature range 0 C to 40 C Operating humidity range 20 to 80 RH no condensation L1 Specifications are subject to change without notice Mass and dimensions are approximate Total harmonic distortion is measured by a digital spectrum analyzer VQT5J46 23 O S 2 E it Sales and Support Information Customer Communications Centre e For customers within the UK 0844 844 3899 For customers within Ireland 01 289 8333 e Monday Friday 9 00 am 5 00 pm Excluding public holidays e For further support on your product please visit our website www panasonic co uk Direct Sales at Panasonic UK Order accessory and consumable items for your product with ease and confidence by phoning our Customer Communications Centre Monday Friday 9 00 am 5 00 pm Excluding public holidays Or go on line through our Internet Accessory ordering application at www pas europe com Most major credit and debit cards accepted All enquiries transactions and distribution facilities are provided directly by Panasonic UK t couldn t be simpler Also available through our Interne
24. ormation about collection and recycling please contact your local municipality Penalties may be applicable for incorrect disposal of this waste in accordance with national legislation Note for the battery symbol bottom symbol This symbol might be used in combination with a chemical symbol In this case it complies with the requirement set by the Directive for the chemical involved 2 2 VQT5J46 Specifications AMPLIFIER SECTION RMS Output power Dolby Digital Mode Front ch non simultaneous drive 30 W per channel 1 kHz 10 THD 4 Q Subwoofer ch 60 W 100 Hz 10 THD 8 Q Total RMS Dolby Digital mode Power 120W TERMINALS SECTION Digital Audio Input TV Optical digital input Optical terminal Sampling Frequency 32 kHz 44 1 kHz 48 kHz 88 2 kHz 96 kHz Audio Format LPCM Dolby Digital DTS Digital Surround Analog audio input BD DVD Audio input Pin jack Speaker output Subwoofer 1 SPEAKER SECTION FRONT SPEAKER L R Type 1 way 1 speaker system Unit s 8 cm X2 Cone type Impedance 4Q SUBWOOFER Type 1 way 1 speaker system Bass ref Unit 16 cm Cone type Impedance 8Q Bluetooth SECTION Bluetooth system specification Bluetooth Version 3 0 Wireless equipment classification Class 2 2 5 mW Supported profiles A2DP with SCMS T Supported codec SBC Frequency band 2 4 GHz band FH SS Operating distance approx 10 m Line of sight GENERAL Power consumption 35 W Power c
25. t Do not pull bend or place heavy items on the lead Do not handle the plug with wet hands Hold onto the mains plug body when disconnecting the plug Do not use a damaged mains plug or socket outlet The mains plug is the disconnecting device Install this unit so that the mains plug can be unplugged from the socket outlet immediately Button type battery Lithium battery Risk of fire explosion and burns Do not recharge disassemble heat above 60 C or incinerate Keep the Button Type battery out of the reach of children Never put Button Type battery in mouth If swallowed call your doctor Small object Keep the button type battery out of reach of children to prevent swallowing 2 VQT5J46 O CAUTION Unit Do not place sources of naked flames such as lighted candles on this unit e This unit may receive radio interference caused by mobile telephones during use If such interference occurs please increase separation between this unit and the mobile telephone e This unit is intended for use in moderate climates Product Identification Marking is located on the bottom of the unit Placement e Place this unit on an even surface To reduce the risk of fire electric shock or product damage Do not install or place this unit in a bookcase built in cabinet or in another confined space Ensure this unit is well ventilated Do not obstruct this unit s ventilation open
26. t is direct shopping for a wide range of finished products Take a browse on our website for further details Manufactured by Panasonic Corporation EU Kadoma Osaka Japan Importer for Europe Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15 22525 Hamburg Germany Panasonic Corporation Em Web Site http panasonic net Panesonic Comoran 2014 RTT ie YOM2001640001
27. ulation sheet has not been removed Remove the insulation sheet gt 8 t may be necessary to set the code of the remote control again after changing the battery of the remote control gt 19 Use the remote control within the correct operation range gt 8 The TV indicator blinks Unplug the AC mains lead and consult your dealer If other indicators are also blinking be sure to inform your dealer of these indicators The main unit is automatically switched to standby mode Auto Power Down function is on The main unit will automatically switch to standby mode when no signal is input and no operation is performed for approx 2 hours Refer to page 18 to turn this function off 2 0 VQT5J46 Bluetooth Pairing cannot be done Check the Bluetooth device condition The device cannot be connected The pairing of the device was unsuccessful or the registration has been replaced Try pairing the device again gt 11 This system might be connected to a different device Disconnect the other device and try pairing the device again The device is connected but audio cannot be heard through this system For some built in Bluetooth devices you have to set the audio output to SC HTB18 manually Read the operating instructions for the device for details The sound is interrupted The device is out of the 10 m communication range Bring the Bluetooth device closer to the main
28. unit Remove any obstacle between the main unit and the device Other devices that use the 2 4 GHz frequency band wireless router microwaves cordless phones etc are interfering Bring the Bluetooth device closer to the main unit and distance it from the other devices Sound No sound Turn muting off gt 17 Check the connections to the other device gt 9 Make sure that the received audio signal is compatible with this system gt 23 e Turn this system off and then on again e If the connections are correct there might be a problem with the cables Redo the connections with different cables Check the audio output settings on the connected device The volume is lowered when the main unit is turned on If the main unit is turned off with the volume setting in the greater half above 50 the main unit will automatically lower the volume to the middle 50 when the main unit is turned on gt 19 The dialog is too persistent or the dialog does not sound natural This system has a function to make the dialog stand out when the volume is low gt 17 There is no audio The power of the main unit turns off automatically When the main unit detects a problem a safety measure is activated and the main unit automatically switches to standby mode There is a problem with the amplifier Is the volume extremely high If so lower the volume Is this system placed in an extrem
Download Pdf Manuals
Related Search