Whole Room Dryer 10290MG-GB USER MANUAL
Contents
1. SPECIFICATIONS j WRD 5000 mum I p Part Number 10290MG GB LTD Height Width Depth Whole Room Dryer Weight Power Voltage 10290MG GB Airflow Fan Speed Fan Blade Diameter Noise Level USER MANUAL IP Rating SAFETY PRECAUTIONS WARNING THIS FAN IS NOT FLAMEPROOF DO NOT ALLOW CHILDREN TO PLAY WITH OR AROUND THE UNIT ENSURE THE UNIT IS INACCESIBLE TO CHILDREN WHEN NOT ATTENDED DO NOT USE THIS UNIT IN AN ENVIRONMENT CONTAINING FLAMMABLE FUMES DO NOT USE THIS UNIT IF THE CABINET OR POWER CORD IS DAMAGED DO NOT INSERT OBJECTS INTO ANY OF THE GRILLES ON THE MACHINE DO NOT COVER OR OBSTRUCT AIRFLOW FROM THE GRILLES DO NOT OPERATE THE UNIT WITH THE COVERS REMOVED DO NOT ATTEMPT ANY REPAIRS SHOULD THE UNIT FAIL TO OPERATE DO NOT STAND ON THE UNIT DO NOT LIFT THE UNIT WHEN SWITCHED ON DO CHECK THE PLUG ON THE EQUIPMENT MATCHES THE SUPPLY DO USE THE UNIT FOR THE PURPOSE FOR WHICH IT WAS DESIGNED DO ENSURE THE POWER CORD AND SUPPLY IS EARTHED CORRECTLY DO USE A RESIDUAL CURRENT DEVICE WHERE POSSIBLE DO KEEP THE UNIT DRY NEVER USE A HOSE OR PRESSURE WASHER TO CLEAN THE UNIT CONTACT DETAILS AW t gt I f 4 4 E lt Fi P A P4 Lt e 7 J f 9 9 9 9 99 9 9 9 9 Telephone 01388 664400 Ebac Industrial Products Limited Fax 01388 662590 St Helens Trading Estate Web w2. roved to BS1362 should be used NON REWIREABLE PLUGS The fuse cover must be refitted after replacement of the fuse SERVICE Always turn off the power and unplug the unit before removing any guards This machine should be serviced by qualified Ebac personnel or other persons having technical competence in servicing electrical equipment following the instructions in the Ebac Service Manual WARNING THIS APPLIANCE MUST BE EARTHED
3. t free of any obstruction during operation SWITCHING OFF Set the ON OFF switch to the OFF position 0 Turn off the power and disconnect Do not use the supply cord to adjust or move the unit Use the handle provided The unit is fitted with rubber feet to allow it to be stored in the vertical position ELECTRICAL CONNECTIONS IMPORTANT The wires in the mains lead are coloured in accordance with the following code GREEN amp YELLOW EARTH zh Uc NEUTRAL BROWN siot LIVE As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your own plug proceed as follows The wire which is coloured Green and Yellow must be connected to the terminal marked E or by the Earth Symbol or coloured Green or Green and Yellow The wire which is coloured Blue must be connected to the terminal in the plug marked with the letter N or is coloured Black The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or is coloured Red You must safely dispose of the non rewireable plug once it has been removed from the flexible cord It is dangerous to attempt to inset the plug into any electrical socket If the supply cord is damaged it must be replaced by qualified Ebac personnel or other similar qualified persons in order to avoid hazard CHANGING THE FUSE Only 13 amp fuses that are ASTA app
4. ww eipl co uk Bishop Auckland Drawing No TPC343 Email sales eipl co uk Co Durham Issue 2 DL14 9AD Date i 24 01 12 INTRODUCTION The user manual tells you how to operate the WRD 5000 Please read thoroughly before operating the unit If you have any questions please contact our Customer Service Department at the address shown at the back of this section or phone 01388 602751 IMPORTANT Your WRD 5000 is packed in a plastic wrapping please ensure that it is disposed of safely and where it will not be a danger to small children UNPACKING Carefully remove the unit from its transit box and wrapping and visually check for any signs of transit damage If there are any signs of damage DO NOT attempt to operate the unit call your supplier for advice Retain the packaging for further use or dispose of it considerately OPERATION The WRD 5000 should only be operated in the horizontal position and with the unit standing on a firm level floor The WRD 5000 is designed to blow large quantities of air across wet surfaces to speed up the drying process The WRD 5000 should be positioned in the centre of the area to be dried Connect the power cord to a Suitable supply and the unit is ready for operation SWITCHING ON The WRD 5000 ON OFF switch is located on the side of the unit To start the fan set the switch to the ON position 1 Since the WRD 5000 has a considerably high suction always ensure that the inlet grille is kep
Download Pdf Manuals
Related Search