User's Manual Product Specifications
Contents
1. Current Readings Recording Settings Battery Life Waming LCD Display tons Over Measurement Range Waming Unit Power Lithium Battery LS14250 SAFT X 1 or AC Adaptor sold separately Approx 6 months Approx 2 5years with RTR 05B Battery Life Battery life depending on measurement environment recording interval and battery performance Communication Method Optical Communication Wireless Radio Wave Communication Wireless Method ETSI EN 300 220 Transmission Distance Up to 100 meters May vary with conditions Wireless Communication RTR 57C Optical Communication RTR 57C TR 57C TR 50C When downloading data Wireless Approx 2 000 readings per minute Collection of a full unit of data Approx 420 seconds optical communication Approx 160 seconds Water Resistance 1 IP64 rated for use in daily life 2 H62 x W47 x D19mm excluding protrusions antenna length 20mm with Large Capacity Battery Pack D50mm Approx 56g including 1 lithium battery with Large Capacity Battery Pack Approx 109g Unit Temp Resistance 40 C to 80 C Standard Sensor Input Cable fe TR 5106 length Approx 0 6m X 1 Lithium Battery LS14250 SAFT X 1 Tube X 1 Strap X 1 User s Manual Warranty x 1 Interface Communication Speed Dimensions Weight Accessories Included 1 Note Not for continued immersion 2 Note The Water resistance rating with the sensor or input cable connected is IP64 Notices about2. meters Please check first by carrying out the wireless communication test with the remote units The recorded data will remain saved If at this time a new battery is placed in the unit recording will continue Make sure no water or foreign objects get inside the case After changing the battery the BAT indicator will disappear in a short time If dirt or scratches are present on the rubber packing water resistance will be reduced 2 If you do not change the battery and continue using the unit the temperature display will intermittently Be sure to fasten the cover tightly display bAtt Please change the battery at once Optical Communication with an RTR 57C By simply placing an RTR 51 52 unit face down on an RTR 57C you can carry out recording start settings and Recording OK c 4 Connect the Temperature Sensor RTR 52 Only changes as well as collect recorded data via optical communication Wireless Communication No Z l Make sure that the sensor is properly connected by inserting it until you hear a clicking sound Data Download No Du oe a The recorded data will remain saved Nee If at this time a new battery is placed in the unit recording will continue and downloading of saved data can be done Place the RTR 51 52 unit face down on the RTR 57C After changing the battery the temperature display will return to displaying only the temperature after which the BAT
3. occur between an RTR 51 52 Unit and an RTR Check Part Names and Functions This is displayed under the following conditions after purchasing and putting E RTR 51 Internal Sensor in the batteries for the first time if the battery terminals were mistaken and a short occurred or if the batteries are replaced after having been taken out A for a long period If this is displayed all data that had been stored in the main unit has been erased E RTR 52 External Sensor A e _______ Antenna LCD Full Memory 57C Unit within a range of up to about 100 meters if unobstructed and direct If recording under the ONE TIME MODE when the data readings reach the Recording Interval 1 second 30 seconds 15 minutes 60 minutes Optical Communication Pert Note In order to collect data via wireless communication it is necessary to i 4 hours 5 days 166 days 1 year 10 i Upper limit of 16 000 readings recording will stop and this will be displayed register via computer the RTR 51 52 unit as a Remote Unit in the RTR 57C Time period 26 min 13 hours 16 hours months intermittently with the current temperature Unit you wish to use For details about making these settings please see the E Starting and Stopping Recording Thermistor Wireless Transmission a Help Menu in T amp D Recorder for Windows or the User s Manual for T amp D You can make sett
4. this User s Manual Please read this manual carefully before using the product All rights of this User s Manual belong to T amp D Corporation It is prohibited to use duplicate and or arrange a part or whole of this User s Manual without the permission of T amp D Corporation Please follow the safety precautions carefully We cannot guarantee nor are we responsible for safety if this product is used in any manner other than was intended T amp D Corporation accepts no responsibility for any malfunction of and or trouble with this product or with your computer that is caused by the improper handling of this product and will deem such trouble or malfunction as falling outside the conditions for free repair of the attached warranty T amp D Corporation accepts no responsibility for any result or effects from using this User s Manual Figures and illustrations in this manual may be slightly simplified and may differ from the actual product On screen messages figures or illustrations in this manual may vary slightly or be simplified from the actual messages and product We sincerely hope that the contents of this manual are true and complete If you find any information to have been omitted or if the information within is confusing or mistaken please contact your retailer or T amp D Corporation Microsoft Windows and WindowsNT are registered trademarks of Microsoft Corporation USA and are binding in the USA and al
5. MEW A Wireless Regulations ME Radio EMC and Safety Regulations C RTR 5 Series complies with technical specifications required under EN 301 489 3 with battery and AC Adaptor EN 300 220 3 and EN 60950 2000 Allowed to use in A B D DK F I P S SW UK N NL CH FIN AUS NZ Inquiries T amp D CORPORATION 5652 169 Sasaga Matsumoto City NAGANO 399 0033 JAPAN Tel 81 263 27 2131 Fax 81 263 26 4281 E mail overseas tandd co jp Homepage http www tandd jp Wireless Thermo Recorder RTR 51 RTR 52 Wireless Temperature Data Logger User s Manual Thank you for purchasing this product Carefully read and fully understand these instructions before using this unit T amp D CORPORATION Copyright 2003 T amp D Corporation All rights reserved 2003 7 16004244070 Product Specifications ATRS2 Measurement Channels 1 Temperature Channel Measurement Item Temperature Internal Temp Sensor External Temp Sensor DO O 60 C to 155 C Measurement Displa 4 Resolution i eae Avg 0 3 C 20 to 80 C Avg 0 5 C Measurement Accuracy Avg 0 5 C 40 to 20 80 to 110 C Avg 1 0 C 60 to 40 110 to 155 C 1 2 5 10 15 20 30 seconds Recording Interval 1 2 5 10 15 20 30 60 minutes Total of 15 choices Excluding Event data Recording Interval 16 000 readings X 1 Channel Endless Recording Mode Overwrite oldest data when capacity is full One time Stop reading when capacity is full
6. RTR 57C or the TR 50C For details about the display during battery changing see 5 Changing Batteries I You can also find detailed information in the User s Manual that accompanies the software Thermo Recorder a Kn for Windows and in the Help Menu of the software 5 Ch B x f tees angin atteries amp gt a Using Wireless Communication with an RTR 57C Unit ging SLES By registering an RTR 51 52 unit as a Remote Unit of an RTR 57C it is possible to carry out wireless data NOTE After removing the oid batteries replace them with new batteries within 4 minute communication special short wave radio allowing you to start and stop recording make recording condition settings and collect data without having to handle the RTR 51 52 units 1 When the battery power becomes low the BAT indicator will appear on the LCD display 2 Insert the battery in its tube and place in unit as in diagram Once the BAT indicator appears please change the battery as soon as possible If you are going to be using wireless communication Recording OK ma OM Make sure that and are correct it is necessary to register the Group Name and Wireless Communication OK Cc il C E 1 yc Remote Unit Name information in the RTR 57C Data Download OK Dm cy units mani m The wireless communication range if unobstructed and direct is about 100 meters In some cases communication cannot take place even within 100
7. e shielded by Teflon If the shield has a defect or tear the waterproof capacity is lost as the shield is very thin Inspect it before operation Insert the sensor tip of least 5cm or more to obtain on accurate temperature measurement Only use the sensor within the sensor heat durability range Wireless Thermo Recorder RTR 51 RTR 52 1 Outline of System This system makes use of the RTR 51 52 unit to measure and record temperature data which can then be downloaded via wireless transmission to our handheld RTR 57C Data Collector Unit The RTR 57C Unit can then be connected to your computer for data analysis and management with our exclusive software Besides the collection of recorded data it is possible to monitor current temperature readings start recording and check data anytime without physically collecting E Setting the Recording Conditions The recording conditions include Recording Mode Recording Interval Start Recording Date and Time and Unit of Temperature You can easily make the necessary changes to these conditions to fit your recording needs Recording Mode Select from two types of Recording Mode 4 About the LCD Display Downloading Data Data Collection After downloading you can save the data into files and folders create graphs make data tables create text file format files for use with popular spreadsheet software and print graphs and tables E Setting Upper and Lower Limits By makin
8. fficient contact Battery life depends on the measurement environment communication frequency recording interval and battery quality Pay attention to water leakage or foreign objects entering into the unit case as in the following cases The case was closed with dust hair etc on the rubber packing or in the groove for the packing The rubber packing becomes damaged In this case please purchase the optional maintenance set The unit suffered from significant temperature change while wet Especially if the temperature change is from high to low gt SSe gt D o gt Operate the units with T amp D Recorder for Windows Ver1 00 E Remove batteries from any unit that is not to be used for a long period of time Batteries left in a unit not being used for a long time may leak and cause a malfunction Do not use or store the unit in places such as listed below It may cause electrocution fire or damage to the unit or to your computer Areas exposed to direct sunlight Areas exposed to water or high pressure water flow Areas exposed to organic solvents and corrosive gas Areas exposed to strong magnetic fields Areas exposed to static electricity Areas exposed to fire or overheating Areas exposed to excessive dust or smoke A TR 5106 Standard Sensor of RTR 52 Do no fold the sensor tip section or expose it to a strong impact This may cause trouble or break the wire The sensor and the cable ar
9. g upper and lower limit settings you can check your recorded data Recording Status REC LIT UP displayed during recording or when FULL of data BLINKING displayed when waiting for a programmed recording to start Low Battery Life Warning Indicator Displayed when time to change the battery Unit of Temperature Measurement select from C Celsius ONE TIME MODE When the data capacity of 16 000 readings is reached the LCD display will indicate FULL and recording will stop ENDLESS MODE When the data capacity of 16 000 readings is reached the data will be erased in order from the oldest data first and recording will continue Below is an estimate of the amount of time it will take for the unit to become FULL in the ONE TIME MODE Calculation Example 30sec recording interval x 16 000 readings capacity limit 480 000 seconds about 5 days and 13 hours as it is downloaded for data that exceeds the set limits or F Fahrenheit Temperature Measurement Display the RTR 51 52 units Communication between units can be done via optical communication as well as wireless communication Basic Functions of RTR 51 52 Wireless Communication Function Via special short wave radio communication recorded data can be downloaded from an RTR 51 52 unit and saved to the RTR 57C Data Collector Unit Recording settings and recording start can also be controlled via wireless communication Wireless Communication can
10. indicator Insert cable into jack will disappear a short time later Se amp 3 If you do not change the battery even under conditions in 2 above the REC indicator will disappear and temperature display area will display SLP 5 After Inserting the Batteries If necessary make changes to the default recording settings according to your usage and needs If Communication with your Computer you are going to be using wireless communication it is necessary to register the Group Name and By placing an RTR 51 52 unit face down on an RTR 57C unit that is connected to your computer you can make Recording No C Remote Unit Name information at this time See 3 Settings and Communication any necessary recording conditions settings and changes start recording and download recorded data easily Wireless Communication No Dad D rl via your computer display Data Download No pu ee Recording will stop and recorded data until this point will be saved NOTE When changing batteries make sure to carefully read 5 Changing Batteries if nothing appears on the LCD Display please follow the above instructions again Upon first installation of the batteries measuring and recording will automatically begin at the factory set default recording settings Recording Interval 10 minutes Endless Mode Immediate Start After replacing the batteries the settings will return to the most recent recording settings If a
11. ings to control the starting and stopping of recording Temperature Sensor Connector This will be displayed when transmitting data to an RTR 57C unit via wireless Recorder for Windows NOTE 5 E d icati jar FI Ei communication Wide Temperature Measurement Range By starting a new recording all data previously stored in the data logger unit will RTR 51 Internal Sensor can measure between 40 C to 80 C be erased No Sensor Connected Only for RTR 52 RTR 52 External Sensor with the included sensor can measure from 60 C to If you want to save the data make sure to download it and save it in an RTR Displayed when a sensor has not been connected or the wire has been 155 C 57C Unit or in your computer before starting a new recording broken Measurement and recording will continue and battery power consumed Measurement Over Range Only for RTR 52 i m The current temperature display will blink when the temperature exceeds g s A 3 2 Setting Started 3 Settings and Communication SIG GPE 60C or 155 To start and stop recording make or change the various recording settings and or collect data please see the Insert the batteries K Note l eg B following instructions Use in cold environments may cause the display to be difficult to read this is not a malfunction 1 Remove the screws and take off the back case n For details about communication please see the User s Manual that comes with the
12. l other countries Company names and product names are trademarks or registered trademarks of each company This User s Manual cannot be reissued so please keep it in a safe place Please carefully read this User s Manual and Free Repair Warranty e Safety Precautions and Instructions X Please carefully observe the following safety measures when using our product To prevent any loss or damage to our customers other people and or property and to ensure the proper use of our products we ask that before using our product you carefully read understand and follow the safety rules and precautions for our products as outlined below Explanation of Warning Symbols DANGER These entries are actions that absolutely under no G circumstance should be taken The taking of such an action may cause serious personal physical damage or death Do not take apart repair or modify the main unit Q It may cause fire electrocution or damage Ask the shop where you purchased the product or T amp D Corporation to carry out any repairs If any smoke or strange smells are emitted from the unit A immediately cease using it Continued use may cause fire electrocution or damage Do not use any batteries other than those that are A recommended It may cause fire or damage Explanation of Picture Symbols This symbol denotes an important warning or caution Inside or near the symbol will appear another symbol giving details EX A N stand
13. s for Fire or ELECTROCUTION This symbol denotes a forbidden action Inside or near the symbol will appear another symbol giving details EX stands for DO NOT TAKE APART This symbol denotes an action that you must take Inside or near the symbol will appear another symbol giving details If water or a foreign object enters the case immediately cease using it Q Store all batteries sensors and Thermo Recorder units out of the reach of children It is dangerous to swallow batteries Please be careful when using the units in overly hot or cold environments touching the units may cause burns or frostbite Do not use this unit for any purpose other than temperature measurement Q The RTR 51 RTR 52 are devices to measure temperature gt O gt O Z T amp D is not responsible for any malfunction or trouble caused by the use of our product or any problem caused by the malfunction of our unit Please be fully aware of this before using our product This product has been designed for private or industrial use only It is not for use in situations where strict safety precautions are necessary such as in connection with medical equipment whether directly or indirectly Do not drop or expose the unit to strong impact Do not put your fingers or foreign matter into the sensor connection Battery terminals may provide insufficient contact due to age or vibration Please be careful not to lose data due to insu
14. t this time a new battery is placed in the unit downloading of saved data can be done To start recording again please set the recording conditions via your computer or RTR 57C and begin recording See 1 Outline of System Place the RTR 51 52 K unit face down on the Ss RTR 57C After changing the battery the temperature display will return to displaying the temperature 4 If you do not change the battery even under conditions in 3 above the display will go blank All of the recorded data will be erased If at this time a new battery is placed in the unit CHEC will appear on the display after which recording will begin again using the previously set recording conditions
Download Pdf Manuals
Related Search