Home
*Goodsmaster User Manual_DIRECT:*Trolleylift User Manual DIRECT
Contents
1. yk T SS CO l Note The green button remains illuminated until the Goodsmaster moves away from your floor Fig 16 Fig 15 Please note that if either the inner car gate and or the outer landing door is not correctly closed the red light will not go out and the lift will not operate GOODSMASTER OPERATION SENDING e Before sending the lift to another floor ensure that the inner car gate if fitted is fully closed e Press the white button to send the lift to the desired floor Fig 17 e The green light will go out and the red light will come on to confirm that the Goodsmaster is on its way e On arrival at the selected floor the red light will go out and the green button at that floor will illuminate e The Goodsmaster arrival buzzer will also sound as the Goodsmaster arrives UNLOADING e To unload the Goodsmaster open the landing door and the inner car gate where fitted by lifting the car gate handle and sliding the car gate open using the HANDLE to avoid trapping your fingers Fig 18 amp 19 The red light will illuminate to indicate to other users that the Goodsmaster Is in use The Goodsmaster can now be unloaded When you have finished unloading the Goodsmaster please remember to gently close the inner car gate where fitted ensuring it is properly locked followed by the landing door to make sure the Goodsmaster is available to other users Fig
2. USER HANDBOOK StannahY IMPORTANT Before using your Stannah Goodsmaster please ensure that you read and familiarise yourself with these instructions INDEX Introduction 3 Goodsmaster Operation Controls 4 Calling 5 Loading 6 7 Sending and Unloading 8 Do s and Don ts 9 Intercom Option 10 Goodsmaster Care 11 Guarantee 12 Troubleshooting 13 Stannah Service Branches 15 For your records Goodsmaster Model Load capacity kg Serial number Date into service Note Whilst every effort has been made to ensure the clarity and accuracy of this handbook Stannah Microlifts cannot be held responsible for damage or injury resulting from negligence or misuse of the Goodsmaster NO INTRODUCTION Important please read Thank you and congratulations on purchasing a Stannah Goodsmaster Before using your Goodsmaster you should read this User Handbook and ensure that all employees are thoroughly trained in both its safe operation and use Your Goodsmaster Is a precision product manufactured to the highest quality standards and conforms with all British and European statutory requirements for goods lifts as shown on our EC Declaration of Conformity which has been issued in accordance with the Machinery Safety Regulations Your Goodsmaster will give you many years of trouble free operation provided that it Is properly maintained and treated with respect Points to ensu
3. 3 The Lifting Operations amp Lifting Equipment Regulations 1998 LOLER further require that lifting equipment is thoroughly examined by a competent person For a Goodsmaster this thorough examination Is required every 12 months Stannah can offer this examination for a small fee and would recommend more regular maintenance to keep your Goodsmaster in tip top condition 4 The Health amp Safety at Work Act 1974 and supporting regulations place a general obligation on both employees and persons in control of premises to provide safe access together with adequate lighting to enable the Stannah Service Engineer to work safely within the Goodsmaster motor compartment 5 You must ensure that the Goodsmaster motor room is not used for purposes other than housing the Goodsmaster equipment Access to the motor room must be secure against unauthorised entry a permanent warning notice has been supplied which must be affixed to the Goodsmaster motor room door UJ GOODSNMASTER OPERATION CONTROLS Goodsmaster controls are located beside the landing doors on each floor that the lift serves The controls are very simple each control station contains an individual button for each floor that the lift serves green being the call button for the particular floor you are on and white buttons to send the lift to any of the other floors The red indicator is a Lift in Use light Fig 1 Fig 1 GOODSMASTER
4. 20 amp 21 The red light will go out to confirm that the Goodsmaster is again available for use oy cy e E E SSS a Tn r O5 i T ee a GOODSMASTER OPERATION DO S AND DON TS DO make sure that the load is secure and not overhanging any part of the Goodsmaster car This will ensure that the car gate and landing door can be securely closed Fig 22 DO close all landing doors and inner car gates where fitted after unloading Fig 23 DO report any malfunctions immediately having first referred to the Troubleshooting guide on page 13 Fig 24 PH Gee Ge N Uy N UTT DA f NA a N re AN lt ee i DON T slam wheeled loads into the back wall or inner car gate of the lift car or use the back wall of the lift car as a buffer to stop trolleys or wheeled loads Fig 25 DON T try to prise the landing door open as you will damage the door lock mechanism Fig 26 DON T overload the lift Fig 27 DON T try to enter or ride in the Goodsmaster it is for carrying goods only Safety Regulations forbid travel by any persons in a GOODS ONLY lift Fig 28 ETI 7 GOODSMASTER INTERCOM OPTION The following information applies to Goodsmasters fitted with the intercom option DESCRIPTION The Goodsmaster intercom option is designed to enabl
5. OPERATION CALLING e If the green button is illuminated the Goodsmaster is at that floor ready to be loaded If a white button is illuminated this indicates that the lift is at another floor If the red light is not illuminated the Goodsmaster can be called by pressing the green button Fig 2 The red light will come on to confirm that the Goodsmaster is on its way Fig 3 On arrival the green button will illuminate and the red light will go out The arrival buzzer will also sound This shows the Goodsmaster has arrived and is ready to be loaded Fig 4 When the landing door or inner car gate if fitted are opened the red light will also illuminate to show users on other floor levels that the Goodsmaster is in use Fig 5 If a white button is illuminated this indicates that the lift is on another floor If the red light is illuminated this indicates that the Goodsmaster is not available because either the landing door or inner car gate if fitted is not properly closed If the red light stays on go to the floor indicated by the white button and close the landing door and or the inner car gate if fitted to put the Goodsmaster back into service GOODSNASTER OPERATION LOADING When the green button is illuminated the Goodsmaster is at that floor and is ready for loading Fig 6 Open the landing door gently by pulling the handle Fig 7 The red light will illuminate to indic
6. ORT Unit 12 Bamford Business Park Whitehill Industrial Estate Stockport Cheshire SK4 1PL Tel 0161 477 3344 Fax 0161 477 3377 MANSFIELD 48 Bleakhill Way Mansfield Nottinghamshire NG18 5EZ Tel 01623 631010 Fax 01623 636182 NORWICH Unit 27 28 Morgan Way Bowthorpe Industrial Estate Norwich Norfolk NR5 9JJ Tel 01603 748021 Fax 01603 743097 NATIONAL CONTRACTS Unit 46 Acorn Industrial Park Crayford Road Crayford Kent DA1 4AL Tel 01322 553925 Fax 01322 522037 Stannah Microlifts Ltd Caxton Close East Portway Andover Hampshire SP10 3QN Tel 01264 351922 Fax 01264 333465 NOTE Whilst every effort has been used to ensure the clarity and accuracy of this Handbook we cannot be held responsible for damage or injury resulting from negligence or misuse of this lift equipment Goodsmaster UH 05 07 We are continually developing and improving the Goodsmaster range and we therefore reserve the right to alter or amend the specification without prior notice
7. ate to the other users that the Goodsmaster Is in use Fig 8 Then open the inner car gate if fitted by lifting the handle and then sliding the inner car gate open using the HANDLE to avoid trapping your fingers Fig 9 amp 10 aa 7 h Se bs Fig 8 T GOODSNMASTER OPERATION When loading your Goodsmaster you should ensure that e The back wall of the lift car or rear inner car gate on a through car lift MUST NOT be used as a buffer to stop trolleys or wheeled loads Fig 11 yy ri en N A Z e the load is secure and that items cannot AL move or topple over Fig 11 Fig 12 e the load does not exceed the carrying capacity of the Goodsmaster if in doubt make another trip Fig 13 eee b e when loading is complete gently ANTA close the inner car gate where l NUTR fitted by gently sliding the car SIS gate across the entrance using the HANDLE to avoid trapping your fingers Fig 14 The car gate is finally locked in position by lifting the handle and allowing the gate latches to drop into position The car gate MUST NOT BE SLAMMED as it will not lock correctly which will stop the lift from working e finally gently close the landing door Fig 15 e when all the doors and gates are closed the red light will go out and the lift is ready to be sent to the desired floor N Es o 5 aea as
8. e Cure Inner car gate and or Check all landing doors and inner landing door left open car gates are properly closed on all floor levels Lift does not operate and red indicator light remains on Lift stopped below serving level due to overloading Call Stannah Service Branch Over travel timer tripped due to goods falling from the lift car and causing the lift to jam No indicator lights and lift Overload tripped Call Stannah Service Branch will not operate on push Rep 15 Amo f n isol buttons Fuse in isolator blown ee mp tuse s in isolator if necessary Fuse E1 in controller blown Lift operates but indicator Indicator bulbs blown Call Stannah Service Branch lights do not operate Lift does not stop at Lift over travelled Call Stannah Service Branch serving level Lift car or balance weight tight in guides Call Stannah Service Branch Call Stannah Service Branch Call Stannah Service Branch Motor rotates but lift car remains stationary Goods fallen from the lift Call Stannah Service Branch car causing the lift to jam A blown indicator bulb will not affect the operation of the lift Please be aware that you will incur a charge if you call out the Stannah Service Branch to replace blown indicator bulbs between service visits The indicator bulbs will normally be replaced as a matter of routine at the next maintenance service visit check with your Service Branch to find out when your nex
9. e users on different floor levels served by the lift to communicate with each other Generally the intercom handset is positioned on the wall next to the Goodsmaster landing entrance at each floor the lift serves It comprises a wall mounted unit with one or more push buttons depending on the model of the lift and a handset Fig 29 OPERATION To make a call 2 floor Goodsmaster Lift the handset from the cradle and press the single button on the wall mounted unit Fig 30 To make a call 3 floor or above Goodsmaster Lift the handset from its cradle and press the button corresponding to the floor you wish to talk to Fig 30 When the button is pressed an audible sound will be heard from the handset at the other floor Push the button again if the intercom is not answered When the handset is answered at the other floor simply talk to the other person as you would on a normal telephone Fig 31 When you have completed your conversation replace the handset into the cradle Fig 32 To receive a call If you hear the intercom ringing Fig 33 Pick up the handset and talk to the other person Fig 31 When you have completed the conversation replace the handset into the cradle Fig 32 10 GOODSMASTER CARE The following procedures carried out regularly will help to keep your Goodsmaster in first class condition CLEANING Any stainless steel components should be cleaned wit
10. h a soft cloth using a light oil e g baby oil and then wiped off with a dry lint free cloth All other surfaces should be cleaned with a soft cloth and detergent avoid using excessive amounts of water in the lift car or on the landing doors Never use abrasives for cleaning any of the surfaces on your Goodsmaster The lift car should be cleaned when the lift is positioned at the lowest floor level SPILLAGES Make sure you mop up and wipe dry any liquid spillages IMMEDIATELY In the event of a major spillage overflowing into the Goodsmaster car contact our Service branch You will need a Lift Service Engineer to provide you with access to the Goodsmaster pit to enable you to clean up the spillage MOTOR ROOM Keep the Goodsmaster motor room locked at all times to prevent unauthorised access DO NOT use the motor room for any purpose other than the operation of the Goodsmaster The motor room should only be assessed by a trained lift engineer 11 GUARANTEE YOUR STANNAH GUARANTEE Stannah Microlifts Ltd are proud to have secured ISO 9001 2000 Quality Management Systems Certification and are pleased to guarantee the whole of our materials and workmanship for a period of twelve months from completion of installation and handover of the lift to you on the following conditions 12 That you enter into a service contract with our sister company Stannah Lift Services Ltd to ensure that the lift
11. is serviced within the first three months from the date of handover and thereafter at three monthly intervals As with a motor car your new lift must be properly serviced and maintained to keep it safe and at its very best The Service Contract is included for the first 12 months Should any defective workmanship or materials become evident within the twelve month period we undertake to repair or replace the defective part as soon as possible during normal working hours Monday to Thursday 8 00am to 4 45pm Friday 8 00am to 3 45pm Should attendance outside normal working hours be requested it will be subject to a reasonable excess charge The address and telephone number of your nearest Service Branch is to be found at each lift entrance The Guarantee does not cover repairs replacements or adjustments which may be required as a result of ordinary wear and tear wilful or accidental damage misuse neglect or any other cause beyond our control If at any time the characteristics or performance of the machine are altered the machine must be issued with a new EC Declaration of Conformity and a new CE Mark affixed That all outstanding monies have been paid to us Stannah Microlifts Ltd Caxton Close East Portway Andover Hants SP10 3QN Tel 01264 351922 TROUBLESHOOTING Check this list before contacting your local Stannah Service Branch it could save you time and the cost of an unnecessary service call Problem Caus
12. re consistent satisfactory service are covered in this handbook In the unlikely event of difficulty please read the section on Troubleshooting on page 13 it could save you the cost of an unnecessary service call A Lock Release key will have been left by our installers in the Goodsmaster motor room It is for use by trained lift engineers only DO NOT attempt to use it yourself We would remind you as the owner user of this goods lift that you have certain legal obligations relating to Health amp Safety These are summarised as follows 1 The Provision amp Use of Work Equipment Regulations 1998 PUWER states Every employer shall ensure that work equipment is maintained in an efficient state in efficient working order and in good repair We strongly recommend that you entrust this to our local Service Centre address and telephone numbers of our Nationwide Service Network are on page 15 It should be noted that in order to validate any guarantee see page 12 the Goodsmaster must be serviced within the first three months from handover and thereafter at three monthly intervals 2 The PUWER regulations also state that Every employer shall ensure that all persons who use work equipment have received adequate training for purposes of Health amp Safety It is therefore your responsibility to ensure that anyone who may need to use the lift not only reads this User Handbook but also receives adequate training
13. t visit is due For your local Stannah Service Branch see details on page 15 l3 STANNAH SERVICE BRANCHES CONTACT STANNAH LIFT SERVICES LIMITED AT BIRMINGHAM Unit A6 Coombswood Way Halesowen B62 8BH Tel 0121 559 2260 Fax 0121 559 8171 BRISTOL Unit 4 City Business Park Easton Road Bristol Avon BS5 OSP Tel 0117 955 9976 Fax 0117 955 5993 BRACKLEY Unit 4 Boundary Road Buckingham Road Industrial Estate Brackley Northants NN13 7ES Tel 01280 704600 Fax 01280 701187 CHRISTCHURCH 6 Ambassador Park Estate Airfield Road Christchurch Dorset BH23 3TQ Tel 01202 476781 Fax 01202 485424 CRAYFORD Unit 46 Acorn Industrial Park Crayford Road Crayford Kent DA1 4AL Tel 01322 555777 Fax 01322 555444 DARTFORD Unit 8 Swan Business Park Sandpit Road Dartford Kent DA1 5ED Tel 01322 287828 Fax 01322 222720 GATESHEAD Wellington Road Dunston Gateshead Tyne amp Wear NE11 9JL Tel 0191 460 0010 Fax 0191 460 1143 SCOTLAND 45 Carlyle Avenue Hillington Industrial Estate Glasgow G52 4XX Tel 0141 882 9946 Fax 0141 882 7503 STANNAH MICROLIFTS DISTRIBUTORS CHANNEL ISLANDS Rob Willder Lifts Ltd Nelson House Nelson Avenue St Helier Jersey JE2 4PD Tel 01534 39515 Fax 01534 68846 IRELAND Olympic Lifts Ltd Olympic House Lissue Industrial Estate Lissue Road Lisburn Co Antrim BT28 2SU Tel 01280 704600 Fax 01280 701187 STOCKP
Download Pdf Manuals
Related Search
Related Contents
Programme Samedi 2 octobre Programme Dimanche 3 octobre repair parts catalog for sunnen® power stroked precision honing 宮崎空港航空灯火施設維持工事(平成26年度~ 平成29年度 Instrukcja obsługi / User manual / Bedienungsanleitung Un projet est Microsoft Optical Mouse 200 for Business Copyright © All rights reserved.
Failed to retrieve file