INSTALLATION AND USER MANUAL
Contents
1. AFTER ANY REPAIR OR MODIFICATION PERFORMED NO ALTERATIONS OR ADJUSTMENTS SHOULD BE MADE TO THIS APPLIANCE WITHOUT THE AUTHORISATION OF THE MANUFACTURER OR FROM ONE OF HIS OFFICIAL Ref 53281 Hob 1 burner on gimbals Ref 53282 Hob 2 burners on gimbals Ref 53283 2 burners glass cover Ref 53284 3 burners glass cover MOUNTING INSTRUCTIONS MOUNTING INSTRUCTIONS 1 Fasten the hob on the work top with the 4 screws and 4 cams supplied as described on figure 1 2 Stick a shock absorber on the head of each front screw 1 Install the pan clamps 1 and insert the wing nut s n 4 cf fig 1 2 Fasten the gimbals on the hob with the screws nuts and washers supplied cf fig 1 The appliance must be connected to the gas supply with a non adjustable Fasten the gimbals on the work top with the screws supplied cf fig 2 pressure regulator which complies with ISO 10239 directive This regulator 3 4 Insert the wing nut in the right gimbal to stop the swing cf fig 3 reduces the gas pressure between the gas cylinder and the appliance and 5 Mount the knob s n must be designed for the following standardized pressure BUTANE 28 mbar 11 2 wg PROPANE 37 mbar 14 8 wg The appliance must be connected to the gas supply with a non adjustable pressure regulator which complies with ISO 10239 directive This regulator Figure 1 reduces the gas pressure between the gas cylinder and the appliance and must be designed fo2. JJ PLASTIMO INSTALLATION AND USER MANUAL REF 53281 REF 53282 REF 53283 REF 53284 REF 53285 REF 53286 Counter top hob 1 burner on gimbals Counter top hob 2 burners on gimbals Counter top hob 2 burners with safety glass cover Counter top hob 3 burners with safety glass cover 1 burner hob sink set 2 burner hob sink set WWW PLASTIMO COM USER MANUAL Each burner is individually inspected To light the burner turn the control knob n5 anti clockwise and keep it pressed Bring a flame or a lighter device near the burner and wait for a few seconds After ignition release the control knob To switch off the burner turn completely the knob n 5 clockwise lf the flame disappears it s probably due to a too high gas pressure On the contrary when gas pressure is too low flames have too much yellow tips In both cases we recommend to have the hob checked and adjusted by a specialist The hob must be installed and used in areas with adequate ventilation Always keep ventilation holes opened when using the hob Never use the hob as a room heater CLEANING Clean the hob with a suitable commercial product such as a dishwashing liquid Burners and knobs must be cleaned with cloth moistened with water do not use chimical nor a cleaner which contains abrasives INSPECTION AND MAINTENANCE OF THE APPLIANCE MUST BE CARRIED OUT BY A LIQUID GAS SPECIALIST A CERTIFICATION OF THE JOB CARRIED OUT MUST BE ISSUED
3. r the following standardized pressure BUTANE 28 mbar 11 2 wg PROPANE 37 mbar 14 8 wg Plan ae Vis Figure 1 anes Came Teor ras we k eg R f 53285 1 burner hob sink set aoe Ref 53286 2 burners hob sink set MOUNTING INSTRUCTIONS Figure 2 Figure 3 1 Mount the control knob s n 1 The appliance must be connected to the gas supply with a non adjustable pressure regulator which complies with ISO C 10239 directive This regulator reduces the gas pressure 4 between the gas cylinder and the appliance and must be designed for the following standardized pressure BUTANE 28 mbar 11 2 wg PROPANE 37 mbar 14 8 wg
Download Pdf Manuals
Related Search