Accessory Pack User Manual Calibration Bio-Well
Contents
1. 4 Position Ti insert and connect wires 5 Position Bio Well on a stand Fig 2 6 Connect Bio Well to the computer 7 In Full Scan mode test the image it should look as a circle without inner noise fig 2 In case of inner noise carefully adjust Ti Insert yellow jack to get clear image 8 Open Calibration mode and press Start Program will make calibration and make all settings it may take up to 5 6 minutes 9 After the process is finished remove Ti insert and a thin glass plate 10 You may use your Bio Well2. Bio Wel Accessory Pack User Manual GETTING STARTED Accessory Pack Overview The Bio Well Accessory pack contains attachments that will allow you to perform Environment scans and calibrate your Bio Well device In order to conduct these functions you must have the Bio Well device and a Bio Well Subscription Plus or above subscription For more information on subscriptions visit www Bio Well com The Bio Well Accessory Pack contains the following items Grounding Cable Titanium Cylinder insert Plastic stand Thin optical glass available in Packs from June 2014 Calibration Bio Well http youtu be F1BAtU9KBJO For calibration you Accessory Pack with the following items calibration stand Ti insert cable pack of thing glasses To have reproducible reliable data both for human tests and for Sputnik you need to make calibration in the following situations You move from one climate zone to another Full moon new moon Strong change of weather conditions Change of seasons e UU N e 5 Parameters of Bio Well are sensitive to the humidity of air so if you expect their change you need to make calibration Procedure of calibration 1 Remove Finger Insert and position Bio Well on the calibration stand fig 1 Fig 1 Bio Well on the calibration stand 2 Clean the optical lens with a cloth you may use alcohol 3 Carefully place thin glass plate in the middle of the optical lens
Download Pdf Manuals
Related Search