EBox Series 2B User Manual - E
Contents
1. The 2B has a very simple method of selecting a mode Simply double press the SELECT button to place the 2B into mode select and then twist the ADJUST knob to change mode up and down When the 2B is in mode select the outputs are automatically disabled bce abSust to onl I7 C In addition the mode select screen also gives you advice on how to do this via a scrolling message Use the ADJUST control to cycle through the available modes Once you have found the mode you want press the SELECT button to activate The modes are Pulse 2 Bounce 3 Continuous 4 A Split Remember when you select 5 B Split a new mode you generally 6 Wave have to turn the outputs on 7 Waterfall to get any response from the 8 Squeeze channel outputs All modes 9 Milk default to OFF when first 10 Throb selected Il Thrust I2 Random 13 Step 14 Training 15 Microphone C 16 Stereo 17 Tickle O The following are system modes and as such they are used to change and O view the system options of the 2B 18 Power Level 19 AB Join 20 Backlight 21 Factory Reset 22 Commander 23 UpLink System Modes The system modes allow you to control and view the options of your 2B Whenever you select a system mode the 2B will always return you to the default pulse mode Backlight Control The E Stim Systems 2B display has an illumination option called the backlight It runs in 3 different modes Off The backlight is2. power supplies as they are designed for this unit Doing so may invalidate your guarantee SAFETY WARNING DO NOT CONNECT THE E Stim Systems EBox 2B UNIT OR ANY ELECTRICAL DEVICE TO ANY LOCATION ABOVE THE WAIST ACROSS THE ARMS COUNTS AS ABOVE THE WAIST BUT ESPECIALLY DO NOT CONNECT ACROSS THE HEART CHEST NECK OR HEAD DO NOT USE IF FITTED WITH A PACEMAKER OR ARE PREGNANT REMEMBER YOU USE THIS DEVICE AT YOUR OWN RISK YOU MUST READ AND UNDERSTAND THE USER MANUAL AND ALL OTHER INSTRUCTIONS BEFORE ATTEMPTING OPERATION Optional 5 Quick start The 2B unit is an advanced multiple program E Stim unit designed to be used by beginners and advanced users alike It has advanced safety features as well as an extensive control system and easy to use controls We strongly recommend you read the manual from cover to cover but we have a quick start guide to help you with your first explorations Once you have fitted the battery page 7 find the on off slide switch and turn the unit on Make sure you have nothing else attached to the unit The LCD should light up and text appears If the LCD illuminates but no text appears then you many need to adjust the contrast page 10 Once your 2B has started up you should see a display similar to This shows the unit is in Pulse mode with both outputs set to OFF output power is set to low and the pulse rate and pulse feel are both set to 50 With no cables or electrodes connected turn th
3. to All modes will start off in a safe way Outputs will be set to OFF and the adjustment control will be set to the middle of the adjustment range with a scrolling message Use the adjust knob to cycle through the available modes and then press the select button to choose the mode For more details on the available modes see page 12 Now for the fun part Turn the unit off and connect a suitable electrode via the output connectors Page Connect an electrode to a suitable section of the body DO NOT CONNECT THE 2B UNIT OR ANY ELECTRICAL DEVICE TO ANY LOCATION ABOVE THE WAIST ACROSS THE ARMS COUNTS AS ABOVE THE WAIST BUT ESPECIALLY DO NOT CONNECT ACROSS THE HEART CHEST NECK OR HEAD DO NOT USE IF FITTED WITH A PACEMAKER OR ARE PREGNANT REMEMBER YOU USE THIS DEVICE AT YOUR OWN RISK Turn the unit on and slowly turn the output level control up You should start to feel a slight tingling sensation from the electrode site Not powerful enough The 2B operates in two modes LOW Power and High Power See page 13 for details on how to switch your 2B box to the high power level And if you want even more power then connect our external power supply unit Experiment Only with experience will you get the most out of your 2B You will find that different modes and levels will give different sensations Always bear in mind the safety warnings SAFETY WARNING DO NOT CONNECT THE E Stim Systems EBox 2B UNIT OR A
4. www e stim co uk commander Getting More If you want to find out how to get the best of out your 2B we have a dedicated E Stim Systems Forum at www e stim net Share your ideas with other 2B users Accessories The 2B is normally supplied with two 1 5M connection cables fitted with two 3 5 mm plugs on one end and two colour coded 2mm plugs on the other as well as a 3 5mm Stereo connection cable suitable for connection to battery powered audio devices Other accessories are available For more information visit our website and our online shop at UK Users http www e stim co uk EU Users http www e stimsystems eu or for the rest of the World http www e stimsystems com Additional Notes Storage In the event that the 2B unit is not going to be used for a period of time always remove the battery to avoid any possibility of damage being caused by battery leakage Cleaning Do NOT use solvents to clean your 2B A gentle wipe with a soft cloth should be sufficient It is not possible to sterilise the control unit 20 Modes Quic Bounce Continuous A Split B Split Wave Waterfall Squeeze Milk Throb Thrust Tickle Random Step Training k Guide Diagram Diagram e Jbl est AW AW AAA NN JUU IU L Mw Mw Adjustment Select Adjustment Pulse speed Pulse Feel Both channels pulse on and off Pulse speed Pulse Feel Channels pulse alternately Pulse Feel mEMM Channe
5. NY ELECTRICAL DEVICE TO ANY LOCATION ABOVE THE WAIST ACROSS THE ARMS COUNTS AS ABOVE THE WAIST BUT ESPECIALLY DO NOT CONNECT ACROSS THE HEART CHEST NECK OR HEAD DO NOT USE IF FITTED WITH A PACEMAKER OR ARE PREGNANT REMEMBER YOU USE THIS DEVICE AT YOUR OWN RISK YOU MUST READ AND UNDERSTAND THE USER MANUAL AND ALL OTHER INSTRUCTIONS BEFORE ATTEMPTING OPERATION Fitting a battery The 2B is powered by a single 9V battery Unlike some other units it is also possible to use rechargeable batteries in the 2B control unit We do NOT recommend the use of Zinc Carbon batteries with your 2B control unit e Ensure the unit is switched off and any electrodes are disconnected e Turn the unit over and using a small screwdriver or a fingernail inserted into the battery compartment slot gently prise the battery compartment cover out e Remove the old battery if fitted and replace with a fresh Alkaline PP3 The battery connector is polarized so it should not be possible to connect the battery incorrectly but ensure the polarity is correct before attempting connection e Place the battery into the unit and replace the battery compartment cover The cover is fitted with two tabs which insert into the lower half of the case first and then the top half of the cover will clip into position e Turn the unit over The unit is now ready for operation e Please note we do NOT recommend the use of zinc carbon batteries due to their gener
6. Supplied Accessories 22 Problems In the unlikely event you have problems with the operation of your 2B email info e stim co uk quoting the serial number and the problem you have encountered There are no user serviceable parts inside and breaking of any seals will invalidate your guarantee All units are guaranteed parts and labour against failure caused by manufacturing defects for the lifetime of the unit provide the unit has been looked after and is returned to E Stim Systems for repair and evaluation SAFETY WARNING DO NOT CONNECT THE E Stim Systems 2B UNIT OR ANY ELECTRICAL DEVICE TO ANY LOCATION ABOVE THE WAIST ACROSS THE ARMS COUNTS AS ABOVE THE WAIST BUT ESPECIALLY DO NOT CONNECT ACROSS THE HEART CHEST NECK OR HEAD DO NOT USE IF FITTED WITH A PACEMAKER OR ARE PREGNANT REMEMBER YOU USE THIS DEVICE AT YOUR OWN RISK YOU MUST READ AND UNDERSTAND THE USER MANUAL AND ALL OTHER INSTRUCTIONS BEFORE ATTEMPTING OPERATION 23 24 Page intentionally blank
7. TM EBox Series 2B User Manua TOR Sik ea i DU er _ Dual channel multiple function electro Stimulation Control unit NC LO Bie Channel A Audio Input Digital Link Channel A Intensity m Adjust Po ann B External Powe Power Off On Channel B J y For software issue 2 09 Index INDEX CERTIFICATE OF CONFORMITY US Regulatory Wireless Notice European Union Notice COPYRIGHT NOTICE WELCOME Key Features Power and Control QUICK START FITTING A BATTERY EXTERNAL POWER SUPPLY USER CONTROLS Overview Channel Level Controls Joining Controls A B Mode Select Button Adjust Control Displays Adjusting Contrast INPUTS AND OUTPUTS Outputs Inputs MODES Selecting a Mode SYSTEM MODES Backlight Control Battery Level Power Selection Factory Reset UpLink Commander System Info PROGRAM MODES Pulse Mode Continuous Mode A amp B Split Modes Wave Mode Waterfall Mode Squeeze Mode Milk Mode Throb Mode Thrust Mode Random Mode Step Mode Training Mode Tickle Mode OO O VU VI A La A N IO 10 10 10 10 12 12 13 13 13 14 14 14 14 15 5 5 5 16 16 16 17 7 I7 18 18 AUDIO Stereo Input Microphone DIGITAL LINK GETTING MORE ACCESSORIES ADDITIONAL NOTES Storage Cleaning MODES QUICK GUIDE SPECIFICATIONS PROBLEMS 19 19 19 20 20 20 20 20 20 21 22 23 Certificate of Conformity US Regulatory Wir
8. al poor performance In the event the EBox 2B unit is not being used for a period of time remove the battery to avoid any potential damage from battery leakage In the event the 2B unit is not being used for a period of time remove the battery to avoid any potential damage from battery leakage External Power Supply It is possibly to use an external power supply with the 2B because of the isolation issues when connecting to the mains we only recommend you use an E Stim Systems supplied power supply The plug socket is beside the on off switch Always ensure that when you connect the external power unit the 2B is switched off Insert the plug into the socket switch the mains power on then switch the 2B on The display should light up as if batteries were fitted User Controls Overview LCD display e ndicators DENTI A RA anzi e E R dn e NM SMI I eiie va cca pr PEUT En irt iu a lt 2 Channel A 5 Output ae LI oF EE Audio Input J Channel A Digital Link Intensity Select si annel B Intensity Pome D Channel B Power owes h anne Output Channel A Level External Power Socket On Off en i Lin Channel B utton ontro level The 2B unit has five user controls Each control allows the user to adjust a particular aspect of the output It is the operation of the controls in combination that will allow the user to provide an effective electro stimulation session The controls are f
9. and gently pull Connections to your E Stim 2B use industry standard 3 5mm mono jack plugs compatible with a number of other manufacturers control units and electrodes Inputs Connection to audio devices and the digital link is via the centre 3 5mm stereo jack socket Ensure the 2B is switched off before inserting or removing the connector to eliminate the possibility of short circuits occurring When removing the connectors Grip the shaft of the connector not the wire and gently pull Ensure that audio devices or the digital link are only connected to the centre jack socket Connecting to either of the output jack sockets will destroy your audio unit The audio input is designed to operate with low level headphone style outputs It is not possible to operate the Digital Link at the same time as the Audio Input The Digital link cable despite appearances is NOT a standard USB cable DO NOT attempt to attach any other USB cable to the 2B digital link input you will destroy your 2B and invalidate your guarantee DO NOT attempt to connect an output to an input It will destroy your 2B unit and possibly the item you connect to Modes The 2B has two sets of modes Program modes offer variations on output and are of most interest to the user System Modes control the general operation of the 2B Selecting a Mode If you need to shutdown the outputs quickly just press the select button twice The outputs will be reset to OFF
10. des The outputs are split between Pulse and Continuous In A split mode Channel A output is pulsed Channel B is continuous In B Split mode Channel B is pulsed and channel A is continuous The adjustment control allows the user to adjust the pulse rate from 2 to 100 with low numbers indicating a slow pulse The second value is the pulse feel that allows you to adjust the sensation of each individual from soft to spiky with values from to 100 NM Wave Mode NAA The output level increases from 0 to the selected limit and then drops back to 0 The adjustment control controls how fast the level goes up or down with values from 2 to 100 The second value is the pulse feel that allows you to adjust the sensation of the pulse stream from soft to spiky with values from to 100 With different values for the left and right channels levels it is possibly to adjust the synchronicity of the outputs with one channel rising and dropping faster than the other Waterfall Mode NN aN RA The output level increases from 076 to the selected limit but instead of dropping straight back to zero the outputs slowly decrease to 0 before increasing again The adjustment control controls how fast the level goes up or down with values from 2 to 100 The second value is the pulse feel that allows you to adjust the sensation of the pulse stream from soft to spiky with values from to 100 With different values for the left and right channe
11. djustment control allows the user to adjust the randomness of the pulse range from 2 to 100 Lower numbers give a much faster random pulse stream The second value is the pulse feel that allows you to adjust the sensation of each individual pulse from soft to spiky Step Mode Step mode is designed to step the output up in individual steps allowing the subject to get used to the current level before the output is stepped up to the next level The output steps between 0 and the current Channel level with a delay between step controlled by the Adjust Control from 2 to 100 The second value is the pulse feel that allows you to adjust the sensation of the pulse stream from soft to spiky Each step is set to 1 Lower values give a faster step Because of the delay of the programmed step any changes in output level will only occur at the next step change Training Mode The training mode is similar to the Step Mode page 17 but the steps are much bigger requiring the subject to learn to enjoy each step before the output is stepped up to the next level The output steps between 0 and the current Channel level Each step is 1 12 of the total Channel level or 1 if the channel level is set to 12 or lower so if Channel A is set to 48 the steps will be 4 8 12 up to 48 and then dropping to zero The Adjust value allows you to adjust the delay between level changes from 2 to 100 The second value is the pulse f
12. e knob marked Channel A level the knob on the left clockwise You should notice the blue channel A LED top right start to flash and the display changes to Both channels can be controlled independently The actual value shown is dependent on how much you turn the Channel A knob Now adjust the knob marked Channel B level the knob on the right clockwise You should now notice the channel B led bottom right start to flash and the display changes to Turn the knob clock wise to increase the value anti clockwise to decrease the value If you want to control both channels together then switch the Link Mode on See Page 8 You have now successfully adjusted the channels output level Again the actual value is dependent on how much you turn the Channel knob Now turn the Adjust knob the centre knob and you will notice the value on the top line of the screen change as well as the rate the LEDs are flashing Now press and hold the select button and at the same time turn the Adjust knob the centre knob and you will notice the second value on the top line of the screen change this is the pulse feel setting Not all modes use both the options to change adjustments it will depend on the mode selected If the then the selecttadjust option is not available is not displayed How do you select a mode Simple press the SELECT button twice a double press and the display should change
13. eel that allows you to adjust the sensation of the pulse stream from soft to spiky Lower values give a faster step Because of the delay of the programmed step any changes in output level will only occur at the next step change Tickle Mode A continuous mode that is only active when the adjustment knob is being turned giving an effect similar to being tickled hence the name Turn the adjustment knob faster for a more pronounced tickle Note the output is only active then the level controls are set above 0 Tickle mode is not accessible from Commander Audio As well as the program modes the 2B offers 2 unique audio driven modes Unlike other systems on the market the 2B is designed to use normal audio sources digitally filtering the input to produce a safe E Stim sensation The stereo mode allows true stereo stimming with the left and right inputs used to drive the dual isolated outputs whilst the microphone drives both channels it s a mono source for the technically minded The audio modes are not currently accessible from Commander Stereo Input The stereo input allows you to use the line in input to stimulate the outputs from a source such as a CD MP3 players The left audio channel activates the A output channel the level indicated by the A and the left hand bar graph whilst the B channel level is indicated by the B and the right hand bar graph the right audio channel activates the B output channel The ba
14. eless Notice This device compiles with Part 15 of the FCC Rules Operation is subject to the following two conditions I this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation The FCC requires the user to be notified that any changes or modifications made to the device that are not expressly approved by E Stim Systems Ltd may void the users authority to operate the equipment European Union Notice Products bearing the CE marking comply with the EMC Directive 89 336 EEC and the Low voltage Directive 73 23 EEC issued by the Commission of the European Community Compliance with these directives implies conformity to the following European norms in parentheses are the equivalent international standards and regulations EN 55022 CISPR 22 Electromagnetic Interference EN 55024 IEC61000 4 2 3 4 5 6 8 1 1 Electromagnetic Immunity and EN 60950 IEC 60950 Product Safety This device may be used in all European Union Countries Type BF outputs Copyright Notice All images and text within this manual are E Stim Systems Ltd 2007 201 EBox EBox 2B 2B Uplink Commander and derivative terms are trademarks of E Stim Systems Ltd All rights reserved E amp OE Welcome Congratulations on purchasing an E Stim Systems Series 2B Given sufficient care your 2B unit should give you many years of ero
15. ls are on continuously The Split channel pulse the other channel is Pulse speed Pulse Feel P s on continuously Speed of increase The output level increases to the set limit and then drops to zero before repeating Speed of increase decrease The output level increases to the set limit and then decreases to zero before repeating The pulse rate increased and then drops to Pulse speed slow The pulse rate increased and then drops to Pulse speed slow Channel B is off when Channel A is on and visa versa Continuous mode with variable feel rising Range of Throb from low to adjustment value and then dropping back to low Continuous mode with variable feel rising Range of Thrust from low to adjustment value and then decreasing back to low Amount of sta Pulse Feel Random pulsed output Step Range Pulse Feel Stepped output Jump Range Pulse Feel Output jumps by level 21 Specifications Class IV Device Dual channel microprocessor controlled electro stimulation unit SANS pees Dual Isolated Channels Type BF Display Backlight 16 Character 2 line LCD and Dual Light Emitting Diodes indicating Channel Activity Program Modes Audio Modes Indented Digital Rotary Encoders controlling individual Controls l channel level Mode selection and adjustment switch selection of power on off C 2 off 3 5mm to 2 mm output cables I off 3 5mm Stereo link Cable 4 off Self Adhesive Gel Pads off user guide
16. ls levels it is possibly to adjust the synchronicity of the outputs with one channel rising and dropping faster than the other Squeeze Mode Mina The pulse rate increases and then drops to nearly continuous producing a synchronised squeeze sensation Both Channel A and Channel B pulse at the same rate The adjustment control controls how fast the pulse rate goes up or down with values from 10 to 100 The second value is the pulse feel that allows you to adjust the sensation of each individual pulse from soft to spiky with values from to 100 NU L WU Milk Mode The pulse rate increases and then drops to 0 continuous This is similar to Squeeze but channels A and B alternate The adjustment control controls how fact the pulse rate goes up or down The adjustment control controls how fast the pulse rate goes up or down with values from 10 to 100 The second value is the pulse feel that allows you to adjust the sensation of each individual pulse from soft to spiky with values from to 100 Throb Mode A continuous mode with the pulse feel cycling between 10 and the adjustment value Nice and relaxing Adjustments values are between 10 and 100 Thrust Mode Similar to Throb Thrust is a continuous mode with the pulse feel cycling between 10 and the adjustment value and then back to 0 Adjustments values are between 10 and 100 Random Mode The random mode is designed to produce a random pulse output The a
17. m Systems personnel and is only used in the event there is a problem with your unit To exit switch the unit off and on again Program Modes The 2B offers a number of program modes Each mode is designed to offer something different but all are controlled by the rotary controls on the front panel Pulse Mode B In pulse mode both of the outputs pulse on and off together The adjustment control allows the user to adjust the pulse rate how quickly they pulse on and off and is adjustable from 2 to 100 Higher numbers indicate a faster pulse rate The second value on the display is the pulse feel this allows you to adjust the sensation of each individual pulse from soft to spiky with values from to 100 Bounce Mode J L_ Bounce mode is so named because the outputs bounce from channel to channel The outputs pulse alternately The adjustment control allows the user to adjust the pulse rate from 2 to 100 Higher numbers indicate a faster pulse rate As with the pulse mode the second value on the display is the pulse feel this allows you to adjust the sensation of each individual pulse from soft to spiky with values from to 100 Channel A is on when channel B is off and visa versa Continuous Mode Both of the outputs are on continuously The ADJUST control adjusts the feel of the output this allows you to adjust the sensation of each individual pulse from soft to spiky with values from 2 to 100 A amp B Split Mo
18. n Select Button The select button is used in conjunction with the Adjust control to change and adjust the settings in all the various modes including changing and selecting the modes themselves The select button responds to a light press there is no need to press to hard Adjust Control The adjust control is used in conjunction with the select button to change and adjust the settings in all the various modes including changing the modes themselves Displays The 2B has 3 display elements the bright backlight LCD display giving the user details of all of the functions of the 2B from control settings to helpful messages The backlight can be switched on and off see page 13 and the contrast adjusted see below The two blue LEDs on the right hand side of the unit illuminate in proportion to the intensity of the relevant output Adjusting Contrast To change the contrast of the LCD turn the unit over and with a small insulated screwdriver insert into the hole in the rear of the unit and gently adjust the screw inside Inputs and Outputs Channel B Channel A Output Output da a Audio Input Digital Link Outputs Connection to any electrode is via two 3 5mm mono jack sockets Ensure the 2B is switched off before inserting or removing the connector to eliminate the possibility of either inadvertent electric shocks or short circuits occurring When removing the connectors Grip the shaft of the connector not the wire
19. off all the time apart from when the unit is first switched on On The backlight is on all the time Auto The backlight is turned on whenever mode select is entered and turns off approx 7 seconds after exit This is the default mode Press the Select button to select and return to the default pulse mode The status of the backlight is retained when the unit is switched off Battery Level The battery level indicator shows the current level of the battery There are 3 battery level symbols indicating FULL 2 3 full 1 3 full and empty As the 2B uses a 9V battery a brand new battery should show full however the unit will continue to operate with flat batteries with a reduced output If your 2B starts to reset itself when higher power levels are selected then this is a sign the battery needs replacing The battery level display will update whenever a control is adjusted Because of the variations in battery manufacturing technology a brand new battery may not necessarily display a full battery symbol For details on changing the batteries see page 7 Power Selection The 2B is capable of operating in two different power levels indicated by a L or H in the display centre bottom line To change the power mode select the power mode and then using the ADJUST control rotate to select either LOW or HIGH Press the SELECT button to choose The 2B will then return to the default pulse mode Once you have selected
20. rgraph display indicates the relative input level of each channel The A and B controls control the percentage of the audio drive that is passed through to the outputs The adjust control allows you to change the speed of the response of the stereo system indicated by the third value A low value gives a quick sharp response a higher values gives a smoother response You should aim for maximum movement in the bar graph If the bar graphs are full you should reduce the output volume of the device you are driving the 2B with if there appears to be no bar graph then turn the volume control up Microphone Uses the internal microphone to stimulate the outputs As the internal microphone is a mono source both the outputs are stimulated together The stereo bargraph display indicates the relative input level The A and B controls control the percentage of the input from the microphone that is passed through to the outputs The built in microphone has no external connections and is sensitive enough to pickup a conversation from several feet away The placement of the microphone is close to the channel A control knob The Adjustment knob allows you to adjust the feel of the output In order to exit from the microphone mode press the select button or turn the unit off e e e Digital Link The 2B has been designed to connect to a PC via an optional digital link For more details of this link visit http www e stim co uk link And http
21. rom left to right Channel A Level Select Button Adjust Control Channel B Level There is also a power slide switch on the bottom side of the unit and an LCD contrast control accessed from the rear of the unit Channel Level Controls The channel level controls adjust the absolute level of the output of the relevant channel Each Channel control value is displayed on the LCD screen with values from OFF 0 to MAX 100 OFF is zero output MAX is full output The output levels automatically drop to OFF when selecting a mode and will always start off at OFF 0 when selecting a new mode Remember when you select a new mode you generally have to turn the outputs on to get any response from the channel outputs Joining Controls A B Mode When you first switch your 2B unit on both the Channel A and Channel B controls are independent However If you select the join mode A B then the two controls become linked giving you effectively one handed operation When you turn the Channel A control up the Channel B value will also rise if you turn it down the Channel B channel will reduce as well If you adjust the Channel B control when the join mode is active then you can adjust the relative levels of each channel To cancel the channel link simply deselect the mode turn the 2B unit off or select the factory reset option When the channels are linked a small sign appears on the bottom row of the LCD scree
22. the power level the 2B will stay in the same power setting until either you select the other power mode or the unit is switched off The currently selected power mode is displayed on all program screens as a L or H Factory Reset A number of settings are retained when your 2B unit is switched off To clear these settings select the factory reset option UpLink The uplink mode allows you to connect your 2B to a PC running our UpLink software in order to download updates For more details of the uplink system visit http www e stim co uk link If you inadvertently select the uplink mode before connecting the digital link and before any communication has occurred between the PC and the 2B you can simply switch the unit off All the controls apart from the on off switch are frozen during uplink mode Commander Commander is our PC control system for the 2B in conjunction with the link cable you can control the functions of the 2B directly from your PC For more details of Commander visit http www e stim co uk commander If Commander is active use the adjust know to select on or off If Commander is switched on and you switch your 2B off Commander will still be active when the 2B is switched on again System Info When you first turn your 2B unit on it will perform a self test start up routine If you press the select button during this time you will enter the debug system These screens are only really for E Sti
23. tic electro stimulated pleasure Before starting always read the instructions and ensure you are completely familiar with all of the controls and the safety warnings prior to use We have tried to make the control system simple and easy to use without compromising on the features available You should find something for everyone and if you don t then let us know Key Features Dual isolated channels with independent controls Backlit LCD screen Clear and simple control system Multiple programs with Triphase options 2 Main power settings Built in microphone amp Stereo Audio Input Adjustable response stereo sampling system Battery and mains power options Upgradeable and controllable via PC digital link Lightweight and portable Lifetime Guarantee Biphasic output waveforms Power and Control As well as offering all the interesting modes like pulse tickle and squeeze the 2B will run in two different power levels L for LOW power is the default setting and is ideal for those people who are just starting out on their E Stim experience whilst the H high power setting takes the 2B unit into a whole new realm of serious power output For more details on the power system see page 13 The 2B can also be operated from the mains via an optional DC Mains adaptor This is a high quality switched mode device that is designed to provide the 2B with exactly what it needs in terms of power We recommend you DO NOT attempt to use other
Download Pdf Manuals
Related Search