ZORA USER MANUAL
Contents
1. 75 89 red olue 90 104 red green 105 19 red green blue 120 154 white 155 119 red white 150 164 green uuhite 165 179 red greentwhite 180 194 blue uhite 195 209 red blue white 210 224 green blue white 225 259 red green blue white 240 254 off 255 red Channel 3 led output 3 1 14 15 29 SO hL 15 59 60 74 75 89 90 104 105 119 120 154 155 149 150 164 165 179 180 194 195 209 off red green red green blue red blue reo green reo greenrblue white red white green white red greentwhite blue white red olue white 210 224 green olue white 225 259 red green blue white 240 254 off 255 red Channel 4 led output L 1 14 off 15 29 red SO 44 green L5 59 red green 60 74 blue 75 89 red olue 90 104 red green 105 19 red greentolue 120 154 white 155 119 red white 150 164 greenwhite 165 179 red greentwhite 180 194 blue uhite 195 209 red blue white 210 224 green blue white 225 259 red green blue white 240 254 off 255 red Channel 5 led output 5 1 14 off 15 29 red SO 44 green L5 59 red green 60 74 blue 75 89 red olue 90 104 red green 105 19 red green blue 120 154 white 155 119 red uhite 150 164 greenwhite 165 179 red greentwhite 180 194 blue white 195 209 red blue white 210 224 green blue white 225 259 red green blue white 240 254 off 255 red Channel 6 strobe white led strobe from slow to fast Channel 7 strobe Il LED output 1 5 strobe from slow to fast Channel2. 6 preset shows sound active Channel 9 preset shows running adjustments 2 Sound active Press the MENU button till BEAT shows in the led display confirm by pressing ENTER then the item will run to the beat of music 3 Auto Press the MENU button the following functions can be achieved by pressing ENTER FROS run the preset shouus the running speed can adjust from SPOO slowest to SP99 Fastest 4 Synchronization amp master slave mode Take one item and set the item at sound active or auto as above then get other items and press the button MENU till SUB shows in the led display confirm by pressing ENTER then connect the items to the item at auto sound active already set by DMX cables disconnect the items from the DMX controller the items will work simultaneously the item at auto sound active as master the others as slave LED DISPLAY DOOI DMX address setting BEAT sound active PROS preset shows SPOO running speeds SUB slave TECHNICAL SPECIFICATIONS Power supply 9O 2LOV AC 5O 60Hz Power consumption6OW DMX control channels 9 DMX 512 connection 3 pin XLR Number of LEDs 282 long life MCD LEDs Dimensions SIO SIO 230mm Weight 4 Okgs Please note Information is subject to change without prior notice
3. by unskilled people can lead to damage or malfunction Please contact the nearest authorized technical assistance centre Always use the same type spare parts Please read carefully the instructions which includes important information about the installation usage and maintenance Don t connect the device to any dimmer pack Do not touch any wire during operation as high voltage might cause electric shock Features Four operation modes DMX 512 protocol auto and master slave and sound active operating in various modes to form different led effects DMX 512 connection connection between fixtures XLR connection F you are using controllers with this light you can connect the DMX output of the controller directly with the DMX input of the first fixture in the DMX chain IF you wish to connect DMX controllers with other XLR outputs you need to use adapter cobles Building a serial DMX chain Connect the DMX output of the first fixture in the DMX chain with the DMX input of the next fixture Always connect one output with the input of the next fixture until all fixtures are connected Optional At the last fixture the DMX cable has to be terminated with a terminator Solder a 120 resistor between Signal and Signal into a 3 pin XLR plug and plug it in the DMX output of the last fixture Connection with the mains Connect the device to the mains with the enclosed power supply cable OPERATION 1 DMX 512 protocol
4. Addressing The LED DISPLAY on the rear side of the base allows you to assign the DMX fixture address which is defined as the first channel from which the item will respond to the controller IF you set for example the address to channel 7 the item will use channel 7 to 14 for control Please be sure that you dont have any overlapping channels in order to control each item correctly and independently from any other fixture on the DMX data link IF two three or more items are addressed similarly they will work similarly At DMX mode you can choose the address from 1 to 512 After you connect the item to the mains the item starts running When the item finishes resetting d OO will flash in the led display you can then set the desired DMX address by pressing the UP or DOWN buttons DMX Controlling After having addressed all items you may now start operating these via your lighting controller After switching on the tem will automatically detect whether DMX 512 data is received or not Nine DMX channels Channel 1 led output 1 114 off 15 29 red SO L4 green 15 59 red green 60 74 blue 75 89 red olue 9O 1O4 red green 105 19 red greentolue 120 154 white 155 119 red white 150 164 green uuhite 165 179 red green white 180 194 blue uhite 195 209 red blue white 210 224 green olue white 225 259 red green blue white 240 254 off 255 red Channel 2 led output 2 114 off 15 29 red SO LL green L5 59 red green 60 74 blue
5. SUC LIGHTING CO UkK ZORA USER MANUAL INTRODUCTION Thank you for choosing this Cue Lighting item Before you start please make sure that there is no damage caused by transportation Should there be any consult your dealer and do not use the device SAFETY INSTRUCTIONS CAUTION Please keep this User Manual for future consultation If you sell the unit to another user be sure that they also receive this instruction booklet Unpack and check carefully there is no transportation damage before using the unit Before operating ensure that the voltage and frequency of power supply match the power requirements of the unit It s important to ground the yellow green conductor to earth in order to avoid electric shock The unit is for indoor use only Use only in a dry location The unit must be installed in a location with adequate ventilation at least 90cm from adjacent surfaces Be sure that no ventilation slots are biDikemhnect mains power before fuse lamp replacement or servicing Replace fuse lamp only with the same type Make sure there is no flammable materials close to the unit while operating as it is fire hazard Use safety cable when flying this unit Maximum ambient temperature is TA 4O C Don t operate it where the temperature is higher than this In the event of serious operating problem stop using the unit immediately Never try to repair the unit by yourself Repairs carried out
Download Pdf Manuals
Related Search