Home
USER MANUAL ACel900&ACel910 ACelTIMER IP66 Installation
Contents
1. power is switched back on Please Note It is important to let the LED fully illuminate before using do NOT complete the installation before using the edge of your electrical screwdriver blade once this has been done the light fittings or heating appliance will switch off and the LED on the time switch will illuminate FULLY after sixty seconds You are now ready to set your time level required using the BLACK potentiometer BLACK TURN SCREW with your screwdriver set your time level as required Screw the switch plate into position on the Electrical back box and clip the timer face plate into position Attach the switch ensuring that the LED hole is in line with the LED The timer is now installed amp ready to use Installation of Multiple Time Switches After Multiple Time Switches are installed and the power is switched back on if the lights or heating appliance come on then one or more of the installed Time Switches will need to be reset using the small RED RESET spring as above in step 6 Please do this on all of the Time Switches one by one until the light fittings or heating appliance have gone off and the LED s on the Time Switches illuminate FULLY this will happen sixty seconds after the light fittings or heating appliance have gone off Main Office ACelSHOP ApS Lille Strandstraede 14 DK 1254 Copenhagen K CVR No 28115067 E mail sales Q acelshop co uk ACelSHOP ApS Unit 17
2. Premier Park Acheson Way Trafford Park Manchester M17 1GA Phone 161 874 1486 Fax 161 877 2013 AE switches Oo Main Office ACelSHOP ApS Lille Strandstraede 14 DK 1254 Copenhagen K CVR No 28115067 ACelSHOP ApS Unit 17 Premier Park Acheson Way Trafford Park Manchester M17 1GA Phone 161 874 1486 Fax 161 877 2013 E mail sales Q acelshop co uk Aa JD CONVENTIONAL MULTIPLE MasterLED MasterLED MasterLED Pa AA REPLACE INTERMEDIATE MasterLED MasterLED MasterLED Main Office ACelSHOP ApS Lille Strandstraede 14 DK 1254 Copenhagen K CVR No 28115067 ACelSHOP ApS Unit 17 Premier Park Acheson Way Trafford Park Manchester M17 1GA Phone 161 874 1486 Fax 161 877 2013 E mail sales Q acelshop co uk Aa JD StaveLED StaveLED SlaveLED MasterLED Main Office ACelSHOP Aps Lille Strandstraede 14 DK 1254 Copenhagen K CVR No 28115067 ACelSHOP ApS Unit 17 Premier Park Acheson Way Trafford Park Manchester M17 1GA Phone 161 874 1486 Fax 161 877 2013 E mail sales Q acelshop co uk
3. USER MANUAL ACel900 amp ACel910 ACelTIMER IP66 IMPORTANT NOTICE This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and any applicable Regulations Installation ACEL900 amp 910 IP66 sixty seconds has Weatherproof 5 sec 120 min elapsed If the LED does not Once the timer is installed and the Installation of Single Time illuminate your light timing is set please allow a Switch fittings or heating minimum of 60 second intervals appliance will be on if between the light fittings or PLEASE ENSURE MAINS this happens please heating appliance timing out and POWER IS SWITCHED OFF follow step 6 if the LED switching the timer switch back BEFORE ANY TIMER is on then follow step 7 on INSTALLATION Press the small RED reset spring on top of the ORANGE relay switch Important Note ACEL900 amp 910 IP66 Mount the IP66 Weatherproof 5 sec 120 min Weatherproof box to your surface using either the four screw holes in each corner or the 2 hole mounting bracket If using the mounting bracket once secure please clip the Weatherproof box into place When installing the cable into the Weatherproof box it 1s advisable to use an IP68 Cable Gland Not Supplied Install power to the Timer Switch ensuring that you have the correct wires in both the Live IN amp Live OUT terminals The LED will illuminate FULLY after sixty seconds once the mains
Download Pdf Manuals
Related Search
Related Contents
Visualizza - Service, Support Brother 1010 Printer User Manual Table des matières - Global Magnetique Copyright © All rights reserved.
Failed to retrieve file