ATTENDANT PARKING BRAKES USER'S MANUAL
Contents
1. Specialised Orthotic Services ATTENDANT PARKING BRAKES USER S MANUAL All USER S OF THE EQUIPMENT SHOULD BE AWARE OF THIS DOCUMENT AND IT S CONTENTS C CLASS 1 DEVICE ISSUE 1 CONTENTS Alternative Cranked End RH ASSEMBLY SHOWN RH Foot Operating Lever 1 off LH Foot Operating Lever 1 off not shown TOOLS R E QUIRE D Location Clamp 2 off Brake Link Arm 2 off Return Spring Spindle 2 off M8 Peg Bolt 2 off M8 x 30 Set Screw 2 off M5 x 20 Set Screw 2 off SCANAAARWN gt a M8 Washer 4 off a Lf 10 M5 Washer 16 off gt 11 M8 Nyloc Nut 4 off 3 12 M5 Locknut 2 off 3 amp 5mm Allen Keys 13 M5 Nyloc Nut 4 off 8 10 amp 13mm Spanners FITTING INSTRUCTIONS 1 Remove the rubber grip from the 2 Unhook the return spring from the tilt lever and slide on the brake spindle on the original brake lever assembly via the location clamp assembly A 3 Remove the nut from the return spring 4 Slot the new return spring spindle and spindle and remove the spindle from link arm assembly into the hole on the the brake lever assembly brake lever assembly vacated by the original spindle E F a 5 Retain the new spindle with the new M5 6 Hook the return spring on to the new Nyloc Nut supplied in kit Once tightened spindle back off the nut about 30 to allow the brake lever to operate 8 Whilst the brakes are on tighten the 9 Re fit the rubber gri2. ation All products manufactured are covered by design rights or patents This document is the copyright of the company and the contents are its intellectual property If you require further copies of this handout or require further details relating to any of its content then please contact us Copyright applies Specialised Orthotic Services Unit 127 128 Fauld Industrial Park Tutbury Staffordshire DE13 9HS Tel 0044 0 1283 520400 Fax 0044 0 1283 520401 E mail enquiries specialorthotic com
3. p to clamp to the tilt lever the tilt lever if possible Repeat procedure for 7 Apply the original brake other side lever and the new lever in to their on positions to establish the correct OPERATING INSTRUCTIONS ON position of the clamp REVERSE USER INSTRUCTIONS j 1 To apply the brakes Push down the 2 To release the brakes Push down on rear part of the lever as shown until the front part of the lever as shown the lever is fully down until the brakes are clear of the tyre Note Make sure the brakes are correctly applied and the wheels are locked in position before releasing the wheelchair Cleaning amp Maintenance Clean the parts with a damp cloth e Check for any signs of wear damage and operation on a daily basis Lubricate any moving parts whilst carrying out routine maintenance on wheelchair Should any problems arise due to faulty manufacturing amp materials under normal everyday use then it is covered by our comprehensive 12 months warrantee from the date of purchase For terms and conditions please consult our Customer Services Department Specialised Orthotic Services Ltd cannot be held responsible for any unauthorised use or incorrect fitting whether resulting in personal injury or not and any damage caused to equipment not supplied with the tray The company has a policy of continual development and we reserve the right to alter specification and design without prior notific
Download Pdf Manuals
Related Search