Home

ug-ADVC110-ce28d5ded..

image

Contents

1. O 3 D D Info There are few PC that can control multiple devices do not use the ADVC110 in the Hub connection where multiple DV signals are input simultaneously DIGITAL IN mode Outputs converted Analog signal DIGITAL IN LED is lit Inputs DV signal either from the 4 pin connector on the front panel or the Input Analog signal is N amp 7 6 pin connector on the _ How to switch modes ANALOG IN mode Press the STOP or the REC REC PAUSE button of the deck control interface on the capturing application Press the PLAY PLAY PAUSE button of the deck control interface on the capturing application Color Bar Output Press and hold the INPUT SELECT button for three seconds to output color bars from the Analog output Input Analog and Digital signals are ignored while the audio is muted Outputs color bars Both LEDs are lit Input Digital signal is ignored gt Basic Instructions Audio Capturing mode In the normal operation of the INPUT modes audio stream will not be output while the video signal is not input If you want to capture the audio alone follow the steps below to switch to the Audio Capturing mode 1 Press the INPUT SELECT button on the front panel to switch to the ANALOG IN mode The ANALOG IN LED will be lit Set the DIP switch 1 on the bottom to the other side from the cur rent position Example Move the Switch 1 to ON if
2. S Advanced Digital Video Converter User Manual June 30 2004 canopus Copyright 2004 Canopus Co Ltd All rights reserved Notices amp Warraties SS Copyright Regulations It is illegal for anyone to violate any of the rights provided by the copyright laws to the owner of copyright except for fair use mainly private noncommercial use Also in certain cases copying is prohibited with no exceptions In no event shall Canopus be liable for any direct or indirect damages whatsoever arising from the use of captured materials Warranty Your ADVC110 options are covered by a limited warranty when you register your Canopus product This warranty is for a period of three years from the date of purchase from Canopus or an authorized Canopus agent This warranty applies only to the original purchaser of the Canopus product and is not transferable Canopus Corporation warrants that for this period the product will be in good work ing order Should our product fail to be in good working order Canopus will at its option repair or replace it at no additional charge provided that the product has not been subjected to misuse abuse or non Canopus authorized alterations modifications and or repair Proof of purchase is required to validate your warranty Canopus is not responsible for any lost profits lost savings or other incidental or consequential damages arising out of the use of or inability to use this product This includes dama
3. it s currently in OFF position STAUS LED is lit while the DIGITAL IN and ANALOG IN LEDs are unlit Play the audio data to capture Capture the audio data on your computer NOTE Switch to the Audio Capturing mode only when the Deck Status from the application s point of view is PLAY Otherwise the sub sequent operations cannot be guaranteed In that event please switch back to the normal mode set the deck status PLAY and then switch to the Audio Capturing mode again Note that you can set the deck status PLAY in either of the follow ing method Press the PLAY button on the application Change to the Digital In mode by pressing the INPUT SELECT button on the ADVC110 unit and change back to the Analog In mode by pressing the button again O Info To switch back to the normal input mode set the DIP switch 1 back to the original position se 6 Caution If video signal is input during the Audio Capturing mode the subsequent operations can not be guaranteed Ste Caution When the input source is paused or stopped in the Audio Capturing mode it cannot be captured 0 C 0 D 6 J E p 0 0 0 m Basic Instructions D D 0 0 3 0 ct J C 19 ct a 3 0 o Advanced Digital Video Converter Chapter 2 Using ADVC1 10 This chapter explains basic instructions for using the ADVGC 1 10 Using ADVC 1 10 C 0 o a gt O lt
4. low the AC adapter is also required 0 C O p 6 J C p 0 Cc o 1 it Basic Instructions SS D D 0 0 3 0 ct J C 19 ct e 3 D Connection Ports The front panel of the ADVC110 has connection ports for both S Video and composite input as well as a 4 pin FireWire input output port INPUT SELECT ADVCII O DIGITAL IN ANALOG IN L AUDIO IN R VIDEOIN SVIDEOIN DV IN OUT ns canopus The back panel of the unit has ports for both S Video and composite output as well as a 6 pin FireWire input output DV IN OUT Bb le S VIDEO OUT VIDEO OUT R AUDIO OUT L DC IN 5V GQooo Basic Instructions Select Input modes ADVC110 has 2 INPUT modes ANALOG IN and DIGITAL IN ANALOG IN mode Input Analog signal is converted to Digital signal which is converted to Analog signal before it is output Outputs converted Digital signal ANALOG IN LED is lit Inputs Analog signal A Outputs converted Digital signal ADVC110 can output 2 DV signals However if the unit is connected to your computer the DV signal is output only to your computer Even though you connect a device to the other port DV signal IS NOT output to that port Optional None displaye 0 C 0 D 8 J C D 0 0 0 U m Basic Instructions SS D D 0 0 3 0 ct J C 0 ct
5. the unit If you primarily capture analog video you should set this to the OFF position so the unit is in Analog In mode when you turn it on e Audio Mode toggles between 48kHz 16 bit 2 channel audio and 32kHz 12 bit 4 channel audio See Setting 4 channel mixing mode in the next section for more information e Locked Audio Mode toggles between capturing locked audio or unlocked audio If you are capturing a lot of long clips you should leave this switch in the OFF position to make sure the audio stays locked to the video e NTSC Setup Level toggles between 0 IRE Japan NTSC and 7 5 IRE USA NTSC e PAL SECAM specifies PAL or SECAM when the DIP switch 6 is in the ON position set to PAL e Video Format toggles between capturing NTSC and PAL video The ADVC110 is set to capture NTSC video by default 7 Using ADVC 1 10 4 channel mixing mode When encoding DV to analog in 32kHz mode the unit can be set to either 1 Use the main audio channel 48kHz 16bit 2 channel mode or 32kHz 12bit 4 channel mode 2 Mix main and sub channel at 50 each 4 channel mixing mode Setting 4 channel mixing mode 1 Set DIP switch 3 to the ON position 2 Press and hold the Input Select button when turning on the unit 3 The STATUS LED is lit when the ADVC110 is in Digital IN mode Bus power If you connect the ADVC110 unit to your computer with only the 6 pin FireWire cable it can be powered by the FireWire port and d
6. ack of the unit D D 0 0 3 0 ct J C 0 ct O 3 0 3 You can now open your editing application and begin capturing video 2 gt Basic Instructions ADVC 1 10 Basics The front of the ADVC110 contains inputs for composite S Video and DV The DV input is a 4 pin FireWire port and can do both input and output Input Select button The Input Select button on the top of the unit lets you toggle between Digital In and Analog In modes A blue light signifies which mode the ADVC110 is using The Input Select button will not work while the both status lights are blinking L AUDIO IN R VIDEO IN S VIDEO IN OV IN OUT DIGITAL IN ANALOG IN canopus e Digital In Indicates that the ADVC110 is ready to receive digital video e Analog In Indicates that the ADVC110 is ready to receive analog video Status light The Status light indicates separate things depending on which mode you are using e Analog In The status light blinks when a Macrovision protected signal is detected e Digital In The status light blinks when the DV audio is set at 32kHz 12bit which is used for 4 channel DV audio See 4 channel mixing mode on page 17 for more information O Info Connected to a PC with an IEEE 1394 cable ADVC110 can operate without the AC adapter In other cases use an official AC adapter optional for the power supply In case the bus power is too
7. fers to Microsoft s Windows 2000 operating system as Windows 2000 To simplify the descriptions the actual product may differ from the illustrations and screenshots Z O ct O o 0 p z D 3 0 ct 0 D o Advanced Digital Video Converter Chapter 7 Basic Instructions The ADVC 1 10 is a simple solution for converting your analog tapes such as VHS and S VHS to DV in realtime This manual guides you through the basics of analog digital Conversion Package contents include e ADVC 110 unit e FireWire Cable 6 pin 6 pin Basic Instructions SS QuickStart If you want to jump right in and use the ADVC110 simply plug it in and follow these steps Gi Inf 1 Insert the FireWire cable 6 pin 6 pin to the DV IN OUT terminal nto on the rear panel to connect the ADVC110 unit to your computer If you are capturing PAL video a you need to change the DIP Socket switch settings For more info see i Setting DIP switches on page 16 IEEE1394 al a 2 If you are capturing video from an analog video make sure the ADVC110 is set to Analog In and that the video is connected to the unit s S Video or composite ports on the front of the unit If you are exporting video to an analog video make sure the ADVC110 is set to Digital In and that the video is connected to the unit s S Video or composite ports on the b
8. ge to property and to the extent permitted by law damages for personal injury This warranty is in lieu of all other warranties of merchantability and fitness for a particular purpose Cautions Please observe the following cautions when using this product If you have any questions regarding the method of usage the descriptions herein or any other concerns please contact the Canopus Technical Support team from 9am 5pm Monday Thursday 9am 3 30pm Fridays except for public holidays and company specific holidays Z e cdt e D 0 p 5 2 3 o ct oO 0 Y DANGER The following conditions indicate the potential for serious bodily injury or loss of life Health precautions In rare cases flashing lights or stimulation from the bright light of a computer monitor display may trigger temporary epileptic seizures or loss of consciousness It is believed that even individuals whom have never experienced such symptoms may be susceptible If you or close relatives have experienced any of these symptoms consult a doctor before using this product Do not use in environments requiring a high degree of reliability and safety This product is not to be used in medical devices or life support systems The characteristics of this product are not suited for use with such systems Protect against static electricity An electrostatic discharge may damage components of this product Do not directly touch any of the connectors or compone
9. ion regardless of item 3 above 5 Regardless of whether negligence occurs during usage the company assumes no liability even if there is a claim for extraordinary incidental or derivative loss including the loss of profits that arise during practical application of this product 6 The analysis reverse engineering decompiling and disassembling of the software hardware or manuals that accompany this product and all other related products including miscellaneous supplemental items are prohibited 7 Canopus as written in both English and Japanese and its logo are registered trademarks of Canopus Co Ltd 8 ADVC110 is a trademark of Canopus Co Ltd 9 Windows are registered trademarks of Microsoft Corporation in the US Other product names and related items are trademarks or registered trademarks of their respective companies ed Notices amp Warraties Notices amp Warraties Notices amp Warraties About the Documentation This document is the ADVC110 User Manual Information not listed in this document may be listed elsewhere In cases where there is a difference between a description in this document and an actual operation method the actual operation method takes precedence This document is written for users capable of performing basic PC operations If there is no special description of an operation perform that operation in the same manner as a general PC operation This document re
10. nopus DV product is connected to a DV IN OUT port and a DV camera to the other DV IN OUT port Set the input mode to DIGITAL IN Using ADVC 1 10 MEMO O O gt O lt 9 C 5 Using ADVC 1 10 MEMO c 0 T te gt O lt 2 O
11. nt surfaces Static electricity can be generated on clothing and on people Before handling the product discharge static electricity from your body by touching a grounded metal surface Do not disassemble Do not remove the cover or modify the ADVC110 Fire electric shock or malfunction may result For internal inspection or repair please contact your system integrator or Canopus directly Do not operate at other than the specified voltage Do not operate at other than the specified voltages of AC 100 240V Operation at other than the rated voltage may result in fire or malfunction Do not operate with an unofficial AC adapter Do not operate with an unofficial AC adapter or with a car power supply Such operation may result in fire or malfunction Handle the IEEE1394 cable carefully Do not place heavy objects on top of the cable or place it near hot objects Doing so may damage the cable and result in fire electrical shock or malfunction Altering the cable or excessively bending or pulling the cable may result in fire or electrical shock If the cable is damaged please contact your local retail outlet or Canopus directly gt Notices Warraties Notices amp Warraties A Notices amp Warraties SS CAUTION The following conditions indicate the potential for bodily harm damage to hardware or loss of data Do not pull on the FireWire cable when disconnecting from electrical outlet When disconnec
12. oesn t need the AC Adapter If the ADVC110 unit is always connected to your system it will auto matically be turned on or off whenever you start up or shut down your computer Power to the ADVC110 must be supplied through the AC Adapter if the ADVC110 is connected to the computer with an analog cable or a 4 pin FireWire cable Macrovision detection When Macrovision signals are detected by the ADVC110 O O gt QO lt D C 0 z The brightness and contrast for both analog and DV output are lowered The Status light blinks Using ADVC 1 10 SS c 0 o a gt O lt E O O Info When the ADVC110 is connected to your computer with the other cable than a FireWire cable 6 pin 6 pin use the AC adapter to supply power DVCAM support When you are connecting to a DVCAM unit set DIP switch 4 to the OFF position to set the ADVC110 to Locked Audio Mode Video signals from game consoles If you are capturing from a video source with irregular video signals such as game consoles you may hear audio noise in the captured video If this happens try setting DIP switch 4 to the ON position so the audio is unlocked Using with Canopus DV products AC adapter optional is required When the ADVC110 is connected to your Canopus DV products use the following setting 1 When the ADVC110 is connected to a Canopus DV product Set the input mode according to the input signal 2 When a Ca
13. p O O Info Input Analog SECAM signal will be captured in DV PAL signal In this occasion the color of the Analog output signal cannot be guaranteed When you re convert the captured DV signal to Analog signal Analog PAL signal will be output instead of Analog SECAM signal Setting DIP switches Use the DIP switches on the bottom of the unit to modify the ADVC110 s functionality Make sure the power is turned off before you make any changes Table 1 DIP Switch Settings No Mode OFF ON 1 Digital in Reference Sync Stream Sync Fixed 2 Power on Input Mode Analog Digital 3 Audio Mode 48kHz 16 bit 32kHz 12 bit 4 Locked Audio Mode Locked Unlocked NTSC Setup Level SW6 OFF OIRE 7 5 IRE a PAL SECAM SW6 ON PAL SECAM 6 Video Format NTSC PAL By default DIP switches 1 3 4 5 and 6 are in the OFF position while DIP switch 2 is in the ON position The DIP switch settings may differ depending on the region of shipment e Digital in Reference Sync Mode toggles between Stream Sync and Fixed modes To make the Video Sync synchronized with the DV Stream Sync set this Switch in the OFF position If you set this switch in the OFF position and the color of the output video be comes black and white set this switch in the ON position making the Video Sync happen in the fixed timing e Power on Input Mode toggles between Analog In and Digital In modes when you first turn on
14. ting the FireWire cable pull on the plug not the cable itself Pulling on the cable can damage the cable and may result in fire or electric shock Do not touch AC adapter optional with wet hands Do not disconnect or plug in the AC adapter optional when your hands are wet Contact with water may result in electric shock fire or damage Do not setup in an area that becomes hot Do not setup in an area exposed to direct sunlight or near a heating apparatus The heat can accumu late causing burns fire or damage Also the unit may become deformed or change color Do not setup other than the prescribed method Do not setup in a manner other than prescribed Do not use while wrapped in cloth or plastic Heat can accumulate causing burns fire or damage If product will not be used for an extended period If this product will not to be used for an extended period of time disconnect the AC adapter optional from the electrical outlet Z e cdt e D 0 p 5 2 3 o ct o 0 e Product Notes 1 Unauthorized copying of a portion or the entirety of this product is prohibited 2 The description and specifications of this product are subject to future change without notice 3 The description of this product has been prepared to be as complete as possible If the reader is aware of any questionable points errors or omissions please contact Canopus 4 The company assumes no liability for the results of practical applicat

Download Pdf Manuals

image

Related Search

ug ADVC110 ce28d5ded..

Related Contents

マニュアル - アイ・オー・データ機器  Samsung HM5000 Инструкция по использованию  PALESTINIAN WATER AUTHORITY  Peut-on industrialiser l`enseignement ?  dreamGEAR DGWII-1208 game console accessory  TAG SV-2003-X2 User's Manual  PowerMaster Automated Meter Tester 4 Series  iDyl User Manual  ダイカストカバー用 スリッパークラッチスタンダードキット 取扱説明書  「取扱説明書」 SAFシリーズ (20070701  

Copyright © All rights reserved.
Failed to retrieve file