VT-HMI 3081 User's Manual
Contents
1. 17 3 6 2 Ethernet Interface 18 5 Vantron VT HMI 3081 3 6 3 D Sub 9 RS232 Connector 2 19 3 6 4 5422 485 seen 20 3 6 5 USB Client Connector 2 21 3 6 6 USB Host 22 3 7 1 0 Interface Instructions 23 3 7 1 AA 23 3 8 Packing sei 25 Software InStrUCtiONS 26 41 Brief Introduction 26 4 1 1 Serial Port Instructions 26 4 2 WInCEInStruct 27 4 2 1 WinCE Application 27 4 2 2 WinCE Firmware 27 4 2 3 Instructions for WinCE Configuration Files 29 4 2 4 Notice of Touch Screen 1 31 43 nu INS TU CUIONS 33 431 Linux Application Development 33 4 3 2 Linux Image Programming 34 4 3 3 Instructions for Linux Configuration Files 35 ASA Start dea ae ai 35 4 3 5 36 4 3 6 RW 50 ener rrr en 36 4 3 7 root config AXU ssis entere tn tnnt 36 4 3 8 Notice of Touch Screen in 37 TIPS2. 38 Vantron VT HMI 3081 1 Foreword 11 Copyright Notice While all information contained herein has been carefully checked to assure its accuracy in technical details and printing Vantron assumes no responsibility resulting from any error or features of this manual or from improper uses of this manual or the software Please contact our technical department for relevant operation solutions if thereis any problem that cannot be solved according to this manual Vantron reserves all rights of this manual including the right to change the content form product features and specifications contained herein at any time without prior notice The latest version of this manual is at www vantrontech com Please contact Vantron for further information Vantron Technology Vantron E mail sales vantrontech com Vantron VT HMI 3081 The trademarks and registered trademarks in this manual are properties of their respective owners No part of this manual may be copied reproduced translated or sold No changes or other purposes are permitted without the prior written consent of Vantron Vantron reserves the right of all publicly released copies of this manual 1 2 Notes Applicable notes are listed in the following table Important information and regulations Caution for latent da mage to system or harm Caution to personnel 1 3 Statement It is recommended to read and comply with this manual before operatin
3. _ 140040 N Cushion for Enclosure s 1 6 140010 0010EVVANTRON Front Panel Protection Screw Mounting 4pcs 250010 01001EVVANTRON Enclosure 210071 01041 ES Power Terminal 3pins E34 a 25 Vantron VT HMI 3081 4 Software Instructions 4 1 Brief Introduction VT HMI 3081 has been pre loaded with WinCE5 0 or embedded Linux image so that the system can automatically run WinCE 5 0 or embedded Linux when powered up 4 1 1 Serial Port Instructions VT HMI 3081 As a default debug serial port COM1 cannot used by applications normally But it can be used after the debug serial port is set to 0 or other serial ports by setting DebugPort parameters in ADSLOAD HWT see 4 2 3 1 RS485 422 is 26 Vantron VT HMI 3081 4 2 WinCE Instructions 4 2 1 WinCE Application Development 4 2 1 1 Development Environment To create Win32 and MFC applications with EVC4 0 and create Win32 MFC and C applications with VS2003 VS2005 and VS2008 the integrated development environment IDE can be purchased from the agents of Microsoft Company 4 2 2 WinCE Firmware Update 1 Copy Bootloader adsload rom configuration files adsload hwt adsload Reg OS image nk bin and background pictures adsload bmp to the root directory of SD card 2 Insert the SD card to relevant slot 3 Power on so that the system can automatically read and update relevant files from the SD ca
4. 30 C 70 C Optional Temperature Storage 20 70 ETR 40 C 80 C Optional E 10 8596RH Non Condensation Humidity Environment operating and storage Condition Vibration 2G 9 26 gt 10 times in X Y Z directions Pr tec n Front Panel IP54 IP65 Optional 12 Vantron VT HMI 3081 3 3 Interface Instructions 3 3 1 Bottom View USB Client Ethernet Interface RS485 422 Serial Port 13 Vantron VT HMI 3081 3 3 2 Left View The SD card socket and debug jumper are under the cover plate Mounting Locatin g Holes 14 Vantron VT HMI 3081 3 4 Dimension v91 Unit mm Mounting Window Size 212x172 mm 15 Vantron VT HMI 3081 3 5 Hardware Installation The product supports standard mounting 75 x 75 mm mm as well as side mounting The left and right sides of the device housing have two mounting slots respectively for inserting mounting brackets to needed positions by tightening screws as shown below Waterproof Cushion 1 114 L E E N S Mounting i Bracket et Mounting Locatin g Holes and Screws 16 Vantron VT HMI 3081 3 6 Interface Description 3 6 1 DC24V Power Interface 3 pins 5 08mm pitch terminal with screw lock 17 Vantron VT HMI 3081
5. 3 6 2 Ethernet Interface Standard RJ45 interface supporting 10 M 100M self adaptation TX 18 Vantron VT HMI 3081 3 6 3 D Sub 9 RS232 Connector Standard vertical DB 9 male connector baud rate up to 921 600bps J BEER NN 008 BEER RN 19 Vantron VT HMI 3081 3 64 5422 485 Connector Standard 6 pins RJ 11 interface If 04 mb 20 Vantron VT HMI 3081 3 6 5 USB Client Connector Standard mini B USB interface 12345 02 21 Vantron VT HMI 3081 3 6 6 USB Host Connector Standard USB host connector type A USB VCC USB POS 22 Vantron VT HMI 3081 3 Interface Instructions 3 7 1 RS485 422 3 7 1 1 485 Cable Connection 485 Device 3 7 1 2 422 Cable Connection VT HMI 422 Device 23 Vantron VT HMI 3081 3 7 1 3 RS422 485 RS422 and RS485 share the same RJ11 interface and the electrical properties thereof are determined according to different connection modes RS 422 wiring suggestion VT HM13081 3101 422 Device RX422 EIA485 RX422 EIA485 TX422 TX422 RS 485 wiring suggestion 3081 3101 485 Device RX422 EIA485 RX422 EIA485 TX422 TX422 24 Vantron VT HMI 3081 3 8 Packing List No PartDescription Quantity 1j 1 2 usersmamar 1 1 2 3 5 7 Utility CD 4 Install Mechanical Tools 1
6. VT HMI 3081 User s Manual 9 2000 CEA Embedded Partner CONNECTED OD s Vantron Technology www vantrontech com All Rights Reserved Vantron VT HMI 3081 Revision History Description Date First release Update Ordering Information Add VESA Information Vantron VT HMI 3081 Table of Contents ORG o 1 11 Copyright Notice 12 5 13 Statement 14 Disclaimer 15 Limitation of Liability Non warranty eese 3 1 6 Safety Instructions 3 dottor 4 1 8 Safety Instructions for Power Cables and Accessories 5 pu 7 2 1 A A 7 22 JProd ctSeries icto ei aa 8 2 2 1 Product Order Coding 8 2 2 2 9 VT HMI 3081 Hardware Instructions sscssssscssssesscscsscsssssssscsssesseees 10 31 Product 10 3 2 5 circa iaa 11 3 3 Interface Instructions 13 3 3 1 13 9 222 COEM Wii t 14 DIMENSION cai 15 35 Hardware 16 3 6 Interface 17 3 6 1 0 24 Power
7. arameters You can either input command Regflushkeys exe Start Run or find the program 5 directory run it to update registry 31 Vantron VT HMI 3081 Stylus Properties ki x Double tap this grid to set the double tap sensitivity for both the speed and physical distance between taps Double tap this icon to test your double tap settings If this icon doesn t change adjust your settings using the grid above Stylus Properties Picture 4 2 4 2 Setting Touch screen sensitivity and speed sensitivity The identification precision differences between finger touch and pen touch may results in different touch screen identification effects Pen touch has better identification effect while finger touch especially finger pulp touch gets relatively poorer precision Therefore it is recommended to operate with fingertips or pen especially at four corners and four sides so as to get optimal touch control effect Meanwhile you can get better double tap touch control effect by setting double tap sensitivity and physical distance parameter between two taps Set according to Double Tap selection in Stylus Properties The physical distance between two taps is recommended to be as great as possible for better finger touch effect Run Regflushkeys exe command after the setting so as to save the updated registry settings 32 Vantron VT HMI 3081 43 Linux Inst
8. boot s parameters a setenv bootargs console ttyS0 38400 SERI ALGETTY ttySO SERI ALBAU D 38400 root dev mtdblock4 init linuxrc rootfstyp e jffs2 noinitrd b setenv bootcmd memcpy 200000 a0008000 200000 bootm c setenv bootdelay 1 d saveenv 4 3 3 Instructions for Linux Configuration Files A Modification and updating of software configurations are dangerous and may cause system boot failure Do not modify on your own unless with a good knowledge of each updating files 4 3 4 start txt The system automatically updates and starts scrip without user s modification 35 Vantron VT HMI 3081 4 3 5 tty_config txt Configure debug serial port and baud rate for the device lt gt Sfconsole The debug serial port adopted by the device could be set with values such as ttySO ttyS1 ttyS2 etc lt gt S baudrate baudrate adopted by the debug serial port could 9 600 38 400 115 200 etc 4 3 6 hw_config txt Configure parameters for LCD driven by the device It functions differently according to different types of device N Hardware compatibility settings must be kept without random modification 4 3 7 root config txt Configure items for automatic updating and boot parameters that will be adopted during the boot of updated system for example images to flashz boot zlmage ramdisk gz flashfs1 is for designating items that need updating U boot image boot Linux knernal image zlmage Linux Ramdisk f
9. g VT HMI which provides important guidance and helps decreasing the danger of injury electric shock fire or any damage to the device Vantron VT HMI 3081 14 Disclaimer Vantron assumes no legal liability of accidents resulting from failure of confor ming to the safety instructions 1 5 Limitation of Liability Non warranty For direct or indirect damage to this device or other devices of Vantron caused by failure of conforming to this manual or the safety instructions on device label Vantron assumes neither warranty nor legal liability even if the deviceis still under warranty 1 6 Safety Instructions lt Keep and comply with all operation instructions warnings and information lt attention to warnings on this device lt Read the following precautions so as to decrease the danger of injury electric shock fire or any damage to the device Vantron VT HMI 3081 1 7 Precautions attention to the product labels safety instructions printed on silk screens lt try repairing this product unless declared in this manual lt Keep away from heat source such as heater heat dissipater or engine casing lt gt Donotinsertother items into the slot if any of this device Keep the ventilation slot ventilated for cooling eSystem fault may arise if other items are inserted into this device lt Installation ensure correct installation according to instructions from the manufacturer wi
10. h the embedded devices equipped with the state of the art technology and the best product services HMI the abbreviation for Human Machine Interface enables the interaction between operators users and applications connects industrial control products such as PLC transducer DC speed regulator meter etc HMI adopts a display for displaying and input units such as touch screen keyboard mouse etc for writing working parameters or inputting operation commands As a digital device for realizing information interaction between human and machine HMI is composed of hardware and software Based on its ample function interfaces and powerful user operational interface it is very suitable for control units such as medical device intelligent transportation industrial field etc Vantron s VT HMI products are based on the most advanced ARM and Intel Atom processors and have low power consumption and high integration The products are designed for applications such as industrials medicals and transportations etc Vantron VT HMI 3081 2 2 Product Series 2 2 1 Product Order Coding Rule VT HMI A BB C H Type suffix 1 Basic type 2 Enhanced type or other types Screen size 07 08 10 15 LCD in 7 8 10 15 inches Product series 3 PXA270 ARM10 processor platform 5 IMX31 ARM11 processor platform 6 Intel ATOM x86 processor platform Vantron VT HMI 3081 2 2 2 Ordering Information Series 3 PXA 270 ARM10 proce
11. id without mouse arrow DebugPort designate serial port for debugging default serial port 1 0 without debug serial port lt BootLogo 0 Bootloader dose not display Logo 1 display Logo consolidated in system 2 display Adsload bmp 24bits or 16bits of bitmap files only 29 Vantron VT HMI 3081 LogoBckGround designate background color RGB565 format of Logo displayed in Bootloader 4 2 3 2 Adsload REG User s registry files can be opened by text editor and are standardized for example HKEY_LOCAL_MACHINE SOFTWARE CERDISP me 192 168 8 88 RefreshTime d word 32 AllowRemote d word 0 The system automatically loads when started and you can add system registry information therein according to your own needs Notice The last row this file must be followed by an Enter 30 Vantron VT HMI 3081 4 2 4 Notice of Touch Screen in WinCE 4 2 4 1 Touch Screen Calibration i To get better touch precision you need to calibrate before using the touch screen The calibration comprises steps of selecting Start Settings Control Panel to step into the control panel interface tapping Stylus con to step into Stylus Properties interface and tapping calibration to start calibrating You may use an auxiliary USB mouse for stepping into Stylus Properties interface After the calibration run Regflushkeys exe command immediately and save calibration p
12. ile system image ramdisk gz Linux jffs2 file system image jffs2 36 Vantron VT HMI 3081 i Files designated by image_to_flash variables must exist in the SD card or USB 43 8 Notice of Touch Screen in Linux 4 3 8 1 Touch Screen Calibration gt To get better touch control precision it is needed to calibrate before using the touch screen generally get electrified on equipment for the first time The program prompts for automatic calibration if the touch screen is not calibrated The system automatically saves calibration parameter after the calibration Two methods for stepping into the calibration interface are listed below if further calibrationis needed a select Start Recalibration command from the menu to step into calibration interface tap Stylus icon in setting bar to step into calibration interface 37 5 Vantron VT HMI 3081 Tips Waste Disposal It is recommended to disassemble the device before abandoning it in conformity with local regulations Please ensure that the abandoned batteries are disposed according to local regulations on waste disposal Do not throw batteries into fire explosive or putin common waste canister Products or product packages with the sign of explosive should not be disposed like household waste but delivered to specialized electrical amp electronic waste recycling dis posal center Proper disposal of this sort of wa
13. nt 39 Vantron VT HMI 3081 Notice Considering that reasonable efforts have been made to assure accuracy of this manual Vantron assumes no responsibility of possible missing contents and information errors in contents citations examples and source programs Vantron reserves the right to make necessary changes to this manual without prior notice No part of this manual may be reprinted or publicly released in forms of photocopy tape broadcast e document etc 40 Vantron VT HMI 3081 Vantron Chengdu Vantron Technology Ltd www vantrontech com Phone 486 28 85123930 85123931 85157515 85156320 Fax 86 28 85123935 E mail sales vantrontech com 41
14. rd The updating process can be observed via the debug serial port The system continues operating after the updating 4 Power off 5 Take out the SD card and delete files stored therein 6 Power on so that the updated items can automatically load and Operate 27 Vantron VT HMI 3081 N Cautions 1 It is our strong suggestion to update firmware carefully because this product recognizes firmware only according to firmware name Therefore it is a must to ensure that firmware in the SD card is the required one You may have to return the product to Vantron for maintenance if the updating of Bootloader adsload rom fails which may causeloss of time and money 2 Do not power off during updating 28 Vantron VT HMI 3081 4 2 3 Instructions for WinCE Configuration Files WinCE has two configuration files adsload hwt adsload reg that can be modified according to your own needs ltis recommended to use configuration files with our technical support Instructions are listed below 4 2 3 1 Adsload HWT Hardware configuration files can be opened by text editor and you therefore only need the following items and keep other items as hardware compatible settings the keywords and values of which should be separated by one or more spaces TAGS MouseDetect 0x01 DebugPort 0 01 BootLogo 0x02 LogoBckGround 0x3B74 lt gt MouseDetect 1 the mouse arrow can be seen after OS is started O other values areinval
15. ructions 4 3 1 Linux Application Development 4 3 1 1 Linux Application Environment The operation environment of VT HMI application system is a QT Embedded open system with the following structure Qt Embedded Applications QWS Server Graphic Event Service Qt Embedded Frame Buffer Input Device Driver Linux Operating System Low level Hardware Platform Users can develop or transplant Qt Embedded based applications to HMI platform 4 3 1 2 Linux Application Operation Manual operation Copy applications to relevant directory and operate by double clicking Automatic operation Copy applications to directory etc rcS d and the system will automatically operate during the next system startup 33 Vantron VT HMI 3081 4 3 2 Linux Image Programming 1 Download image files directly onto nor flash TFTP protocol net Flash map here 0x0 0x40000 U boot 0x40000 0x80000 U boot s parameters 0x200000 0x400000 kernel zlmage 0x400000 0x780000 used to storage bmp file 0x780000 0x2000000 jffs2 file system Use U bootcommand as below Replace U boot a tftp a1000000 uboot bin b protect off all erase 0 40000 d cp b a1000000 O 40000 2 Replace zlmage a tftp a1000000 21 mage b erase 200000 200000 cp b a1000000 200000 200000 34 Vantron VT HMI 3081 3 Store bmp file company logo a tftp 1000000 tl bmp b erase 400000 40000 c cp b a1000000 400000 40000 4 Set U
16. ssor based eani 8 4 PXA270 520MHz Ethernet RS232 Du RS422 485 USBH USBD 8 4 TFT PXA270 520MHz Ethernet 5xRS232 2xRS422 RS485 4xUSBH CAN QUE Ethernet RS232 Series 5 iMX31 ARM11 processor based e 92 sheer a Series 6 x86 processor based MNA 10 4 TFT ATOM 1 1GHz 512MB 1000M Ethernet 85232 RS422 485 4xUSBH2 0 10 4 TFT ATOM 1 6GHz 512MB 1000 Ethernet RS232 RS422 485 4xUSBH2 0 VT HMI 6101 2 15 1 ATOM 1 6GHz 512MB 1000M Ethernet 85232 RS422 485 4xUSBH2 0 15 1 TFT ATOM 1 1GHz 512MB 1000M Ethernet 85232 RS422 485 4xUSBH2 0 Vantron VT HMI 3081 3 VT HMI 3081 Hardware Instructions 3 1 Product Appearance Front amp Side View Bottom View Back View 10 Vantron VT HMI 3081 32 Specifications Marvell PXA270 ARM10 520MHz On Board RAM SDRAM 64MB Memory On Board ROM 32MB Nor Flash External Storage 1x MMC SD USB 1 1 Storage 8 4 TTL TFT 4 3 800 x 600 Resolution 16bit Color Display 250 View Angle 50U 70D 60L 70R TouchScreen 4 Wires resistance type Hardness 4H 1xSpeak Out 3 5mm Supported WinCE 5 0 or Linux 2 6 Software Applications Provide SDK support MCGS tool Input DC24V Max range 8 36V 11 Vantron VT HMI 3081 Aluminum Alloy with Black Enclosure Color optional for other colors Operating 10 C 60 C ETR
17. ste helps avoiding harm and adverse effect upon surroundings and people s health Please contact local organizations recycling disposal center for recycling disposal methods of related products Comply with the following safety tips N Do not use combustible and explosive environment Keep away from combustible and explosive environment for fear of danger 38 Vantron VT HMI 3081 N Keep away from all energized circuits Operators should not remove enclosure from the device Only the group or person with factory certification is permitted to open the enclosure to adjust and replace the structure and components of the device Do not change components unless the power cord is removed In some cases the device may still have residual voltage even if the power cord is removed Therefore it is a must to remove and fully discharge the device before contact so as to avoid injury N Unauthorized changes to this product or its co mponents are prohibited In the aim of avoiding accidents as far as possible it is not allowed to replace the system or change components unless with permission and certification Please contact the technical department of Vantron or local branches for help N Pay attention to caution signs Caution signs in this manual remind of possible danger Please comply with relevant safety tips below each sign Meanwhile you should strictly conform to all safety tips for operation environme
18. th recommended installation tools Ensure ventilation and smoothness according to relevant ventilation standard Vantron VT HMI 3081 1 8 Safety Instructions for Power Cables and Accessories N Proper power source only Start only with power source that satisfies voltage label and the voltage necessary according to this manual Please contact technical support personnel of Vantron for any uncertainty about the requirements of necessary power source N Use tested power source This product still contains a button lithium battery as a real time clock after its external power source is removed and therefore should not be short circuited during transportation or placed under high temperature N Place cables properly Do not place cables at any place with extrusion danger gt Vantron VT HMI 3081 ATR ning Instructions Please power off before cleaning the device Do not use spray detergent Clean with a damp cloth Do not try cleaning exposed electronic components unless with a dust collector Support for special fault Power off and contact technical support personnel of Vantron in case of the following faults gt Thedeviceis damaged gt Thetemperatureis excessively high gt Fault is still not solved after the operation according to the manual Vantron VT HMI 3081 2 Overview 2 1 Introduction Thank you for choosing Vantron It is our commitment to provide our valued customers wit
Download Pdf Manuals
Related Search