Home

MX User Manual V333

1. PPPoE Used In Basic gt Network the gateways will automatically obtain the WAN address returned by the access network after the PPPoE service is started and the user name and password are set Users can dial on New Rock Technologies Inc 1 MX Voice Fax Gateway Series User Manual the gateways to receive the IP address and version of the firmware 2 1 2 Logging On Enter the gateway IP address in the browser address bar eg 192 168 2 218 you can enter the login interface for gateway configuration by entering a password on the login interface Both Chinese and English Languages are provided for the Web interface Figure 2 1 Login Interface for MX Gateway Configuration py English MXS VoIP Gateway Password po ALBAIDA Copyright New Rock Technologies Inc 2014 All right reserved 2 1 3 Permission of Gateway Administrator Logon users are classified into administrator and operator The default password is shown in Table 2 22 The password 1s shown in a cipher for safety Table 2 2 Default Passwords of Gateway Type Default Administrator Passwords Default Operator Password m letters required The administrator can browse and modify all configuration parameters and modify login passwords The operator can browse and modify a subset of the configuration parameters The gateways allow multiple users to log in If both an administrator and operator have logged in the administrator may modify the configuration w
2. After login click Tools gt Export data to open this interface The download procedure is similar to the download procedure of log files Figure 2 42 Interface of export data i Logout Change password Click Download to download files The downloading operation is restricted by the network Only one person can download files at one time Export data Import data Upgrade Restore factory settings Restart Reboot TDM capture Ethereal capture 2 9 3 Import Data After login click Tools gt Import data to open this interface Operating procedure 1s the same as that of software upgrade New Rock Technologies Inc 48 MX Voice Fax Gateway Series User Manual Figure 2 43 Interface of import data A A A NN A NN UNT Logout Change password Export data a Note The extension of the uploaded file is gz Import data E i 1 Upgrade Restore factory settings TDM capture Ethereal capture 2 9 4 Upgrade After login click Tools gt Upgrade to open this interface The software upgrade procedure is presented as below Step1 Obtain the upgrade files tar gz file and save the file onto a local computer Step2 Click Tools gt Upgrade to access to the page of software upgrade Figure 2 44 Interface of upgrade A O A A A EB Logout Change password Export data Note The extension of the uploaded file is gz Upgrade Step3 Click Browse to select th
3. Domain name in REGISTER Domain name ddress in Call ID field LAN IP address Subdomain name Via field O LAN IP address NAT IP address To field Subdomain name Outbound proxy Local IP address From To field Host name Called party number From Request Line field Submit Table 2 24 SIP related configuration parameter Title SIP related configuration MWI Re subscription timer PRACK Session timer Session interval Minimum timer Request Response configure SIP header Contact field in REGISTER Domain name in REGISTER Via field To field New Rock Technologies Inc Explanation The default is 86400 seconds The gateway will send the platform a message to confirm that it has subscribed to MWI service at intervals of the time period set here This parameter should be used in conjunction with voice mail subscription on the page of the subject subscriber line Determine whether to activate Reliable Provisional Responses RFC 3262 Choose to activate session refresh RFC 4028 By default session timer is not activated Set the session refresh interval the gateway will enclose the value of Session Expires into INVITE or UPDATE messages Default value is 1800 seconds Set the minimum value of session refresh interval Choose the registration mode of gateway under LAN traversal circumstance the default is NAT IP Address e NAT IP address use the NAT information
4. FXO event package Handset Package e Line Package New Rock Technologies Inc 10 Name Wildcard Compatibility Configuration CR for End of Line Quarantine default to loop Enable first digit timer Using configured digit map Using notify instead of 401 402 No name in default package Keep connection when on hook MX Voice Fax Gateway Series User Manual Description Select whether a wildcard with prefix is allowed when a gateway registers to the proxy server The default value is not allowed e Partially allowed gateways will use a wildcard with fixed prefix e g aaln when registering For example when configuring telephone numbers if line 1 is set to aaln 1 line 2 is set to aaln 2 and line 3 1s set to aaln 3 the gateways will register to the call agent in aaln without the need of registering the lines individually e Allowed the gateways will use a wildcard in registering without prefix Select whether CR is used as the end of line in the MGCP messages Default not selected Select the Quarantine handle of gateways making a request to the outside and default not selected e Selected quarantine using loop mode the gateways will continually notify all events as requested after receiving a request Select the processing mode when there is no timeout parameter in the outside request received by the gateways and default not selected e Selected the gateways will report timeout in terms
5. Figure 2 24 Media stream configuration interface A e eem cy pr E oeeen System Security White list Media stream SIP Line Trunk RADIUS Encryption Greeting Tones Feature codes Logout Voice O O o a Min jitter buffer 3 frame rang 0 30 default 3 Higher value results in more delay set the value with caution IN CA Submit Table 2 23 Media stream configuration parameter Title Explanation Min RTP port The lowest port number of UDP ports for RTP transmission and receiving The parameter must be greater than or equal to 3000 This 1s a required field Note each phone call will occupy RTP and RTCP ports If the gateway 1s equipped with 4 subscriber lines or trunk line then at least 8 UDP ports are needed New Rock Technologies Inc 30 MX Voice Fax Gateway Series User Manual Title Explanation Max RTP port The highest port number of UDP ports for RTP s transmission and receiving This is a required field The value must be greater than or equal to 2x number of lines min RPT port iLBC payload type Set the RTP payload type of iLBC and the default value is 97 Accepted value is 97 127 The parameter shall be configured in conformity to that of platform G 723 1 rate Set G 723 1 coding rate the default value is 6300 bit s The optional parameters are followings e 5300 bit s the Bit rate is 5 3k per second e 6300 bit s the Bit rate 1s 6 3k per
6. Figure 2 50 Interface of Ethereal capture EM ne I ce Logout Change password Ethereal capture Import data Description You are allowed to capture up to 3 IP voice data files Upgrade each with up to 2M bytes The data files are stored on the gateway in dump cap format Restore factory settings Steps Restart 1 Click Start to initiate the capture proceedure 2 Click Stop to terminate the capture proceedure You will be notified for donwload Reboot TDM capture Ethereal capture New Rock Technologies Inc 53 MX Voice Fax Gateway Series User Manual Step1 Click Start to initiate the capture procedure Step2 Click Stop to terminate the capture procedure You will be notified for download 2 10 Version Information After login click Version info to view the gateway hardware and software version information Figure 2 51 Interface of Version info a A AB pu TAME SR pp E u ut http www newrocktech com cn 2 11 Logout After login click the Logout at top right to exit the gateway management system and return to the login interface New Rock Technologies Inc 54 MX Voice Fax Gateway Series High Availability Configuration Guide 3 Appendix High Availability Configuration 3 1 Overview 3 1 1 Function Definition In the deployment of VoIP network New Rock MX Series VoIP Gateway referred as gateway below supports high availability architecture with Primary Standby Active Standby
7. Submit Table 2 9 Fax configuration parameters Name Description Transparent and T 30 e Transparent Transparent in this mode the voice coding mode must be set to G 711 otherwise the facsimile service fails e T 30 in this mode the media coding is negotiated through re invite 1 38 e T 38 with CED e T 38 with CNG T 30 and T 38 Both T 30 and T 38 Note When received fax signaling carries both T 30 and T 38 media preferentially use T 38 Auto Note When received fax signaling carries both T 30 and T 38 media preferentially use T 30 Jitter buffer Set the extent of T 38 jitter buffer and the default is 250 The valid range is 0 1000 in milliseconds Speed Set the maximum fax transmission rate e 4800 negotiates the transmission rate first in accordance with the V 27 The maximum value is 4800 bps e 9600 default value negotiates the transmission rate first in accordance with the V 29 The maximum value is 9600 bps e 14400 negotiates the transmission rate first in accordance with the V 17 The maximum value is 14400 bps You need to modify it only when the negotiation peer requires Otherwise keep it the default value Receiving port for FoIP Set whether to open a new port when the gateway is switching to T 38 mode and by default original voice port will be used Open a new port use the new RTP port Use the port of the original voice call use the original RTP port that created on call set ECM Determin
8. rable speed T e TT CN suspend cal wing 180 cal antes 138 Submit Table 2 31 Feature codes configuration parameter Title Explanation System feature codes Query IP address The function key for determining the IP address of gateway with a default of Dialing this key users can hear the gateway voice the IP address and system software version number Narrative if the gateway is only equipped with FXO port connect FXO port through the PBX extension line or PSTN direct line and dial the number of this line accordingly press immediately after hearing the second dial tone users may thus hear the IP address and system software version number of the gateway Query phone The function key for determining the phone number of this subscriber line with default of 00 number By dialing this key your will hear the phone number of the subscriber line voiced by the gateway Service feature codes Activate CFU The function key for activating unconditional call forwarding with a default of 60 Dialing this key will activate unconditional call forward of the line and set the destination number for call forwarding User operation off hook press 60 enter the destination number Users can determine the latest destination number set by dialing 60 Note It s required to enable call forwarding service before using this function please see the instructions on the relevant configuration of subscriber line Deactivate CFU Th
9. MGCP FoIP Logout range 1 9999 default 5060 Si stl LO amp e 1 1 ocal SIP port will auto select based 5060 increasing the value 1921681100 192 168 1 100 e g 168 33 134 50 5060 or www sip com 5060 User Ie User agent domain name name e g www gatewaysip com an You may obtain it from service provider Registration period s range 15 86400 default 600 High availability IEA SIP server Cuentan yl Standby SIP proxy server 1 192 168 1 101 5060 e g 168 33 134 53 5060 Standby SIP proxy server 2 192 168 1 102 5060 e g 168 33 134 53 5060 Fault condition No response to OPTIONS request No response to REGISTER INVITE OPTIONS request period 60 s range 1 86400 SELES 200010 the response to OPTIONS is OPTIONS request ti ut 2000 o SS 1000 32000 1f the response to OPTIONS is timed out switch to the standby server Active SIP server 192 168 1 100 5060 AAN Aa ana switchover manually to the next available server Submit Configuring the Domain Name of the Primary Server In case the primary SIP server is located through the domain name the steps below should be follows Step1 Ensure that active standby feature is enabled Step2 Fill registrar server domain name in Registrar server then submit Step3 Click Basic gt Network check Enable in DNS fill IP address in Primary server and then submit New Rock Technologies Inc 3 MX Voice Fax Gateway Series High Availability Configuration
10. asa o o o o ooo o o o o 9909 ee fo fo o loi 09 09 00 9 o 0 0 0 00 00 2 7 3 Call History on FXO After login click the label of Status gt Call history on FXO to open this interface New Rock Technologies Inc 43 MX Voice Fax Gateway Series User Manual Figure 2 35 Interface of call on FXO Call Status ll hi ll hi FXO SIP message count Logout Submit Clear Refresh TO UmbeundcalsfromPSTNtoFxO Outbound calls from FXO to PSTN Ring Answered Short call Falure Duration Callattempt Answered Short call Failure Durston m o o o o woo o o o o 00 00 00 eos o o o o 9x o o o o 00 00 00 os o o o o 9000 o o o o 00 00 00 moz o o o o omo o o o o 00 00 00 _ os o o o o www o o o o 6 09 00 2 7 4 SIP Message count After login click Status gt SIP message count to open this interface Figure 2 36 Interface of SIP message count 0 Basie Routing Line Advanced ooo to Call history on FXS Il hi nt Logout Clear Refresh Request REGISTER we ack BYE CANCEL INFO Other L mem IN ww LN wv A e pL aged 8 amp gs e 1 8 ax Mulieres L0 e E A og ae A A Response 183 Session 302 Moved 487 Request Bake D d oap es E ee ee A m Server 6xx Global E AN i 2 2 8 Logs 2 8 1 System Status Critic
11. the registration server s address is not entered yet e Latest response the latest response message for the registration 200 means registered successfully e No response no response from registration server The cause may contribute to 1 incorrect address for the registration server 2 IP network fault or 3 the registration server is not reachable Latest Call Info Show the latest call Call Context Info Show the call status Rtp Context Info Show the voice channel related to the calls 2 8 2 Call Message After login click Logs gt Call Message to open this interface New Rock Technologies Inc 45 MX Voice Fax Gateway Series User Manual Figure 2 38 Call Message interface 02 15 14 55 21 732820 FXO 8004 5 disconnected 02 15 14 55 21 733734 FXO 8005 6 disconnected 02 15 14 55 21 734261 FXO 8006 7 disconnected 02 15 14 55 21 734783 FXO 8007 8 disconnected 02 15 14 55 22 973685 SIP send 192 168 10 201 5081 len 313 SIP 2 0 200 OK Via SIP 2 0 UDP 192 168 10 201 5081 branch z9hG4bKhjhs8ass877 To sip 192 168 15 31 tag 2ecc8d66 From lt sip sbc 192 168 10 201 5081 gt tag 1928301774 Call ID a84b4c76e66710aff4457uv CSeq 101 OPTIONS Allow INVITE CANCEL ACK BYE INFO REFER NOTIFY PRACK UPDATE OPTIONS Content Length 0 2 8 3 System Startup After login click Logs gt System Startup to open this interface Log files can be downloaded through this interface Figure 2 39 Interface of Syste
12. 12345 ADD 8001 FXS 12345 REMOVE 4 FXS 12345 END Add suffix 8001 to the called number starting with 12345 for calls from FXS ports then remove four digits in front of the number to end number transformation yielding 58001 Example 2 IP 222 34 55 1 CPNX REPLACE 2680000 IP 222 34 55 1 CPNX ROUTE FXS 2 For calls from IP address 222 34 55 1 calling party number is replaced by 2680000 and then the call is routed to FXS port 2 with the new calling party number New Rock Technologies Inc 17 MX Voice Fax Gateway Series User Manual Processing Mode Description and Example CODEC Designate the use of a codec such as PCMU 20 16 where PCMU denotes G 711 20 denotes RTP packet interval of 20 milliseconds and 16 denotes echo cancellation with 16 milliseconds window PCMU 20 0 should be used if echo cancellation is not required to activate Example IP 6120 CODEC PCMU 20 16 PCMU 20 16 codec will be applied to calls from IP with called party number starting with 6120 RELAY Insert prefix of called party number when calling out The inserted prefix number follows behind RELAY Example IP 010 RELAY 17909 For calls from IP with called party number starting with 010 digit stream 17909 will be outpulsed before the original called party number is sent out Table 2 13 Routing Destination Destination Description and Example ROUTE NONE Calling barring also known as blacklist Example IP CPN 1 3 5 ROUTE NONE Bar a
13. 7 9 indicates a value among 1 2 3 5 v Submit Dialing rules are used to effectively judge if the received number sequence is completed for the purpose of terminating receiving numbers and sending received numbers The proper use of dialing rules can help to reduce the connection time of telephone calls The maximum number of rules that can be stored in gateways 1s 250 Each rule can hold up to 32 numbers and 38 characters The total length of dialing rules table the total length of all dialing rules can be up to 2280 bytes The following provides descriptions of typical rules Table 2 10 Description of Dialing Digit map Description X Represents any number between 0 9 Represents more than one digit between 0 9 THE 1s a special dial string for users to receive gateway IP address and version number of firmware by default x T The gateways will detect any length of telephone number starting with any number between 0 9 The gateways will send the detected number when it has exceeded the dialing end time set in system parameter configuration and hasn t received a new number New Rock Technologies Inc 13 MX Voice Fax Gateway Series User Manual Digit map X XX Hxx 2 8 xxxxxx O2xXxXXXXXXX O13XXXXXXXXX 13XXXXXXXXX 11x Oxxxx 17911 e g Description Any length of telephone number starting with any number between 0 9 If subscribers press key after dial up the gateways will immediately t
14. Configuration Parameters Name Description Signaling port Configure the UDP port for transmitting and receiving MGCP messages and the default value is 2427 Note The signaling port number can be set in the range of 1 9999 but cannot conflict with the other port numbers used by the equipment 66 99 Proxy server Configure the IP address and port number of MGCP proxy server separated by and it has no default value The address can be set to an IP address or a domain name according to the subscribers requirements When a domain name is used it is required to activate DNS service and configure DNS server on the page of configuring network parameters Examples of complete and effective configuration 46 33 136 50 2727 or www proxy com 2727 User agent domain The domain name associated with the call agent and it has no default value name Example www gatewaymgcp com Default event List all the types of default event packages supported by the HX4 Multiple package names are package separated by The default value is L D G e L Line Package e D DTMF Package e G Generic Media Package Persistent line event List the event types that the gateway can report with multiple types separated by When gateways process the events listed here they will report to the call agent Note This parameter must be set since there is no default value The factory setting is L HD L HU e L HD Offhook e L HU Onhook
15. RO 20 ZONE XS Phone do O 20 250 LA NODE PP A e RI II II II II II iun 24 2 9 9U DserIDet Line RE MUESTRA tesi i tos o Tet quis 21 Pam VEU Line FOAM CS AAA AAA esas tevidebeea wedesadeatagdees 23 23A Reame Bae ie A 24 2 50 dicun A EN M MEE VEM VI VEM 25 2 0 Ndvaneed Coh CUOTA A d a epa eu a od ad eaa toi AAA A AAA A ES anti ou an UR d 26 LO SIS AAA TE 26 2O ECU CON SU COMN E 29 O te Lists A A A A IS 2 02 WLC dit S Te EAEE EEE E TEE TE NE G AENT 30 2 0 OS IPAs elated OMI raO a aid a A ladies 31 2 90 haracteristics OF SUDSCHIDEL HNC ta EET A dde 33 2 0 Characteristics or TAk LINEE EEO O ETARE 35 20 50 RIOS Call LOGS A E E 37 28 EN PONES AA E EA AE A EA A A A 37 2 20 A O 39 PA GO o o Tone dl E A A Po E I EU TEM 39 20A 2 A A OO 40 PROP d n 43 ZAS ru E 43 2 4 250 AN MAIS ORY OD EOS CORRER aria ROI PEE O O o putat iterat 43 pre dI EPISIOR Ofb O AAA PE OC N PC r sn Cece arcane oe Taree laid obcaecati etre eater 43 Zr EA SIP MESSIS COUP ioa mt a A ea 44 ER MEI O IO A H 44 A SR S ESI P PH e M eee 44 200 23 A T Dp bosco A Md E qu E EM 45 Dig DY SEC TUN OL ARUN tse yack EIE E EEE OL 46 28A Manite LOS cre es ia
16. called party This feature requires the support display of softswtich By default this is not selected Caller ID Set whether the number of this telephone is sent to the called party with support from platform By restriction default this is not selected Outgoing call Select if outgoing calls are barred on this line By default this is not selected barring DND Do not Select if Do Not Disturb is enabled on this line By default this is not selected disturb DDI Direct Set whether DDI Direct Dialing In is activated By default this is not selected Different from FXS Dialing in DDI is only used for incoming calls and the gateways will not send dial tone after off hook calling Polarity reversal in on user side Note Reverse polarity signal must be activated on the gateways when DDI is used Select if reverse polarity signal is activated on this line By default this is not selected Note The gateways will provide reverse polarity signal when the phone is connected after this feature is activated Maintenance Select if the line is set to maintenance status in which the FXS port no longer supplies current to the phone By default this is not selected Subscribe MWI Select if voice mail service is activated and by default this is not selected Also see MWI Re subscription timer on page Advanced gt SIP 3 way Select if 3 way service is activated and by default this is not selected 2 5 4 Trunk Line Features This pa
17. four pairs of analog lines Note Numbers of interface slots vary from different configuration QUO Matrix of 4 x 4 LED status indicators on interface card Each RJ45 socket has 8 pins leading out 4 pairs of analog telephone or trunk lines in agreement with the pair specifications for Ethernet interfaces whose corresponding relations can be seen in the table below CAT 5 cables are used to connect the interface card and distribution panel in equipment installation Standard RJ11 telephone lines can be used to plug in a RJ45 socket The telephone trunk lines are connected to the 3 pair of pins for simple call test Table 1 8 Pin Specifications for MX60 RJ45 Socket Port 18 Pair 2 d Pair 3 Pair Ath Pair Ti RING TIP2 T3 RING3 RING2 T4 RING4 a a A Analog line pair New Rock Technologies Inc 5 MX Voice Fax Gateway Series User Manual Figure 1 4 Schematic Diagram of MX60 Subscriber Line Connection ETH Eight lines of each RJ45 socket are separated into four pair line sequences RJ45 White Orange WO White Green WG White Blue WB White Brown VVN Orange O Green G Blue B Brown N Figure 1 5 MX60 Back Panel AC 100 240V S0 60Hz 1A max d k PWR STU ALM q VU 40 0 000 li OY O OY 4 00 NJ Ga D Figure 1 6 MX60 Back Panel DC ETH ETH2 vv I C3 6 0989 CX 9 C New Rock Technologies Inc 6 MX Voice F
18. gateway as hang up Generally this value should not be less than 800 milliseconds Used by gateway to avoid a glitch of the phone status with default of 50 milliseconds When the duration from hang up to off hook falls short of this value the gateway will ignore the status variation and consider that the phone remains in hang up status In opposite case the gateway will ignore the status variation and consider the phone remains in off hook status Effective range of setting is 10 1000 milliseconds Set the ringing frequency to be transmitted by gateway to the phone ranging from 15 to 50 Hz with default of 20 Hz The ring voltage sent from the gateway to the phone is configurable The range is from 45 to 85 Volt Set the delay release time of line as caller control method with default of 60 seconds Effective range of setting is 15 180 seconds Used when gateways FXS port is connected with the trunk interface of PBXs For calls from gateway to PBX gateways will relay the extensions to PBX after the delay set here Setting of 0 means no extension number relay The default is 0 milliseconds This parameter is used with the loop open disconnection request The range is from 100 ms to 6000 ms Set the trigger for polarity reversal the default is Outgoing e Outgoing transmit reverse polarity signal only when the outbound is connected e Bi direction transmit reverse polarity signal for the connection of both inbound and out b
19. mode and Load balancing mode Primary Standby mode In this mode a backup SIP proxy server referred as SIP server is configured The gateway will failover to the backup server automatically when the primary server faults The gateway detects the failure condition of primary server by sending OPTIONS request to it O If the gateway does not receive the response to OPTIONS request it will failover to the backup Server o After failover to the backup server the gateway will still send OPTIONS to the primary server all the same It switches back to the primary server once the response to the OPTIONS request is received Active Standby mode In this mode one SIP proxy server referred as SIP server functions as the primary server while other SIP servers function as standby servers Either of the following conditions could trigger the failover operation of the gateway e Not receiving response to the OPTIONS message from the current SIP server to which the gateway sends or receives call traffic or e Not receiving response to the REGISTER INVITE message from the current SIP server to which the gateway send or receives call traffic The administrator can manually switchover the gateway from the current SIP server to the next available one The gateway will redirect call traffic to the designated proxy server in responding to the re INVITE from the server Load balancing mode In this mode the clustered SIP servers are
20. number is not consecutive ID n Fill in the telephone number associated with the trunk n FXO port This should be manually performed if Batch mode is not used 2 5 3 Subscriber Line Features This page 1s only used for configuring gateways with subscriber lines FXS port After login click Line Feature tab to open the configuration interface New Rock Technologies Inc 21 MX Voice Fax Gateway Series User Manual Figure 2 14 Configuration Interface for Subscriber Line Features FXS phone number FXO phone number Feature Trunk Feature batch Trunk batch Logout esis SS S S SSCS SSSCSCS a tri E gt CA U Also see Caller release in page Advanced gt Line Y Also see Loop open interval in page Advanced gt Line nS Call waiting Callhold Caller transfer Caller ID display Caller ID restriction Outgoing call barring J DND Do Not Disturb 3 way Polarity reversed signal Maintenance Subscribe MWI Also see MWI subscription in page Advanced gt SIP DDI Direct Dialing in Table 2 16 Configuration Parameters of Phone Features Name Description Phone number Fill in the phone number associated with this port Display name Fill in the name associated with this port Registration Select if this line is required to register with a softswitch This is selected as default Password If Registration is selected users must enter the authentication passwor
21. second SIP TOS For SIP signaling set the service level quality guarantee for different priorities The default value is 0x00 RTP TOS For RTP voice streams set the service level quality guarantee for different priorities The default value is OxOc Min Jitter buffer RTP Jitter Buffer is constructed to reduce the influence brought by network jitter This default value is 3 Max Jitter buffer RTP Jitter Buffer helps to reduce the influence brought by network jitter The default value is 50 RTP drop SID Determine whether to discard received RTP SID voice packets By default SID voice packets will not be dropped Note RTP SID packets should be dropped only when they are in nonconformity to the specifications Nonstandard RTP SID data could generate noise for calls Enable VAD Only applicable to G 723 GSM iLBC In case of selecting this parameter it will not send any voice packet during mute period By default this 1s selected RTP destination This parameter determines where to obtain the IP address of the receiving side for RTP packets address By default the IP address is obtained From SDP global connection e From SDP global connection obtain the IP address from SDP global connection e From SDP media connection obtain the IP address from SDP Media Description 2 6 5 SIP Related Configuration SIP messages consist of request message and response message Both include a SIP message header field and SIP message body field Th
22. system will display the LAN gateway address automatically obtained through DHCP This parameter must be set due to no default value DNS Enable Activate DNS service Primary Server If DNS service is activated the network IP address of the preferred DNS server must be entered and there is no default value Secondary Server If DNS service is activated the network IP address of a standby DNS server can be entered here It is optional and there is no default value New Rock Technologies Inc 4 MX Voice Fax Gateway Series User Manual Name Description SNTP Primary Server Enter the IP address of preferred time server here This parameter must be set due to no default value Secondary Server Enter the IP address of standby time server here This parameter must be set due to no default value Time Zone Select a time zone and the parameter values include e GMT 11 00 Midway Island e GMT 10 00 Honolulu Hawaii e GMT 09 00 Anchorage Alaska e GMT 08 00 Tijuana e GMT 06 00 Denver e GMT 06 00 Mexico City e GMT 05 00 Indianapolis e GMT 04 00 Glace Bay e GMT 04 00 South Georgia e GMT 03 30 Newfoundland e GMT 03 00 Buenos Aires e GMT 02 00 Cape Verde e GMT London e GMT 01 00 Amsterdam e GMT 02 00 Cairo e GMT 02 00 Israel e GMT 02 00 Zimbabwe e GMT 03 00 Moscow e GMT 03 30 Teheran e GMT 04 00 Muscat e GMT 04 00 United Arab Emirates e GMT 04 30 Kabul e GMT 05 30 Calcut
23. the control of all call services is provided by the proxy server without the need of these setting Inbound handle The gateways provide three scenarios for handling incoming calls on the FXO trunk e Binding when a telephone call comes to the FXO port the gateways will route the call to a FXS port according to the DID number bound with the port Note Setting a number to be bound is required or this setting is invalid e Second stage dialing when a telephone call comes to the Line port the gateways will provide the second dial tone and route the call according to the extension number entered Note Dialing tone or voice prompt file can be changed by user e Direct the gateways will route the incoming call on FXO port n to FXS port n RFC6913 If this item is selected the Fax over IP label carried in INVITE is supported per RFC6913 Polarity reversal If a PSTN line supports reverse polarity make the selection here By default this is not selected detection Caller ID detection Select if the detection function of caller ID for this FXO port is enabled By default this is selected Outbound blocking Select if this FXO port bars outgoing call service to the PSTN By default this is not selected Echo cancellation Select if echo cancellation is enabled for this FXO Line By default this is selected Connect signal After making an outgoing call from a FXO port the gateway will send a 200 OK message to the delay platform with a delay
24. voltage input 910 e eje me e Table 1 17 Meanings of MX120 Indicators PWR Power SEE TS System locked and inactive Indication Green Flash Normal operation Green No alarms AEN Alarm Red Flash New alarms occurred but not confirmed Indication Steady red Power on is in progress awaiting normal operation Alarms existed and all alarm information confirmed Table 1 18 MX120 system operation state Glittery letter Status meaning C The IP address of gateway conflicts with that of other equipment in LAN Please settle this problem before the gateway can be operated normally D Internal failures have been encountered during gateway start up procedure Please contact your local distributor for further diagnosis P The gateway is in progress of system software upgrade Please guarantee stable power supply and do not conduct other operations during this period T The application software of gateway has been exited If it cannot be restored by rebooting the system please contact your local distributor for further diagnosis New Rock Technologies Inc 11 MX Voice Fax Gateway Series User Manual 2 Parameter Setting 2 1 Login 2 1 1 Obtaining Gateway IP Address Differ from medium and large scale Gateways MX8 Gateways start DHCP service by default and automatically obtain an IP address on the LAN users can use the factory default gateway IP address 1f it is unable to be obtained e g when connected directly with a c
25. 21 MX Voice Fax Gateway Series User Manual Figure 2 20 SNMP configuration interface Basic utes dB MMIZLM 6 on TaS o m System Security White list Media stream SIP Line Trunk RADIUS Encryption Greeting Tones Feature codes Logout NAT traversal Dynamic NAT Y Refresh period more than 14 s default 60 SDP address NAT IP address Local IP address Remote management Auto Provision Management system type 2700 Notification interval Submit Table 2 20 Parameters for SNMP configuration Parameter Description Signaling port Enter the SNMP local port The default value is 2700 If SNMP is selected the following three parameters need to be specified Server Enter the address of the SNMP server Trap port Enter the port number of the SNMP server The default value is 162 Notification interval The default value is 900 seconds Figure 2 21 TRO69 configuration interface a py ce Ae rs ML lio nella System Security White list Media stream SIP Line Trunk RADIUS Encryption Greeting Tones Feature codes Logout more than 14 s default 60 D NAT IP address Local IP address eee o peu e g http 211 148 35 16 7547 o o e OO 100 III E o EE E o e O A REL Sov pl EE EEE T E E JEMEN Submit Table 2 21 Parameters for TRO69 configuration Parameter Desc
26. E IP 127 0 0 1 5060 IP 1001 ROUTE FXS Description 1 Send a call with a called number starting with 1001 from FXS port to port 5060 of gateway s local IP 2 Send a call with a called number starting with 1001 and from any IP to the FXS port 1 Configuration number of FXS1 itself is 61202701 so the call of this number is not required to write specialized routing Hunt Group A hunt group can be associated with a set of FXO ports and an inbound call from IP or FXS ports can be routed to a hunt group Routing Setting Send an inbound call from the IP trunk or an FXO line in a sequential way to the phone set on the Ist or 2nd FXS port FXO x ROUTE IP 127 0 0 1 5060 IP x ROUTE FXS 12 Description 1 Sendall calls from the FXO port to port 5060 of gateway s local IP 2 Send all inbound calls from any IP address to the Ist or 2nd FXS port in sequence Namely the first FXS port is selected firstly when it is available otherwise the 2nd port is selected Outbound Call Barring Restrict users to from dialing certain telephone numbers such as an international call Examples are as follows Routing Setting Description FXS 1 0 ROUTE NONE A calling starting with O is barred from dialing using the phone set at FXS1 port FXS 1 2 00 ROUTE NONE A calling starting with 00 is barred from dialing at 1 2 FXS ports New Rock Technologies Inc 19 MX Voice Fax Gateway Series User Manual FXS CPN2 ROUTE NONE The telephone who
27. Guide Figure 3 5 Page to set DNS server A LL A A A GCP FoIP Logout AG VoIP GW Contain letter number and but must start with letter MAC address 00 0E A9 00 31 31 IP address assignment Fixed YV IP address 192 168 250 81 Gateway IP address 192 168 2 1 Primary server 192 168 2 5 e g 202 96 209 6 Secondary server e g 202 96 209 133 198 60 22 240 Secondary server 133 100 9 2 Time zone GMT 08 00 Beijing Submit Primary server lt 3 3 3 Set the Failover Condition You should choose one of the following conditions e No response to OPTIONS message e No response to REGISTER INVITE message No Response to OPTIONS When this condition is chosen the following timers need to be configured e OPTIONS request period the interval between receiving the response 200 from the SIP server to the previous OPTIONS and sending the next OPTIONS e OPTIONS request timeout the period since the sending of the last OPTIONS with no response by the SIP server Figure 3 6 Page to set failover condition 192 168 1101 5060 e g 168 33 134 53 5060 192 168 1 102 5060 e g 168 33 134 53 5060 Active SIP server 192 168 1 100 5060 E aa Switchover manually to the next available server New Rock Technologies Inc 4 MX Voice Fax Gateway Series High Availability Configuration Guide No Response to REGISTER INVITE When this condition is chosen the gateway will failover to the standb
28. ING4 Orange Green Blue Brown Figure 1 8 Schematic Diagram of MX120 Subscriber Line Connection Eight lines of each RJ45 socket are separated into four pair line sequences PHONE White Orange WO White Green WG White Blue VVB White Brown WN Orange O Green G Blue B Brown N Table 1 15 Corresponding Relation Between MX120 RJ45 Socket and Line Number RJ45 Socket No From Left to Right Line No of This Card There is a 6 x 4 LED indicator matrixes on the left side of interface board Each row of LED indicator matrixes matches four telephone lines on a RJ45 The first row on the left matches Line 1 4 respectively from top to bottom the first row on the right matches Line 21 24 respectively from top to bottom and the middle rows in the same manner LED indicators are used for multiple purposes as follows Line status indication this is the most common mode during normal use of equipment In this mode if a line is idle the indicator corresponding to it goes off 1f a line is in call or in use status such as ringing offhook the indicator corresponding to it goes on Line type indication this is the mode for cable wiring check when installing the equipment This mode can be entered by disconnecting Ethernet cables Both WAN and LAN ports must be disconnected at installation stage After entering this mode steady on LED indicates that the corresponding line is New Rock Technologies Inc 9 MX Voice Fax Gate
29. New Rock Technologies Inc MX Voice Fax Gateway Series User Manual MXS MX60 MXI20 http www newrocktech com Email gs newrocktech com Document Version MCO E001 N AM New Rock Contents COn cuiu MM IE I M A 2 Contents OLI oeron a cec 4 Contents A 6 L OVervieW A E E AE Gi aste E ER A Du 1 EU Product BittodUctiOn ces icd eite E T A A ee S 1 EZ RUOCUOAS MUECA e A A tada 2 Lo Equipment SHUI A AA Ed E 2 IBS UU bd m EA 2 132 MX GO ti lcd 4 AAA R e O A 7 Z Parameter Seting ii A AAA AA AAA AAA AA AA AS A A AAA AA 1 A a RE UT 1 2 Ml Obtamimo Gateway IEA ES ii A IA ti 1 2A 2 Eoso ME A E dhs UU UL UU NM O 2 2 1 3 Permission OL Gateway ACUSA AA AAA ERA teas 2 2 2 b ttons Used on Gateway Management Interface uoo decre a eu Teal 3 2 9 BCA OMIT OUT MUL ON et tiara iive tere duteueuetadesesadutabe Ta ae a a dale tiledcta a vat ore toot luat T 3 AUN ini m EE 3 PAS EAM A A OEEO EEA ONTEN E 3 LAS Y LEE ONE ULA AA A AAA A AAA A 6 Did SA o APA OP O E A 7 2 X5 Ie Ava llaby C OTPEESUEOU OBI tt Reti sedute Malta osas 8 ZO MOCP COn ewr ia a STEEP 10 ES A E E E A 11 A E toc O 13 A ROL 13 DD AA ae eet ed cease Dale ae dd ata tlt deca cadena dd ue PPP 15 2 4 9 Application Examples OF Routine Table naaa ves AAA ED UL AS AAA A eto tree auda 18 AAN CAE E 20 PA
30. P TO TRU cua 1 Table 2 4 Syst m Contiouration Parameters Sci 6 Table 2 5 Codec Methods Supported Dy Gateways sd ii A AA A AA A alu eu tore bv ee Ed 7 Table 2 6 SIP Conieuration ParaniCters unica ia A AAA A A AAA 8 Table 2 7 PACMAN A A AA ia 9 Table 2 5 MOGCP Confeuragon Parameters watt dd AA hr AA a 10 Table 22 Ea COMMSUrallON Par apa 12 Table 2 10 DescHpionot DAI er lr as ii 13 T ble 2 11 Routine Table POr anota il ti E dl itac ibd ied oe 16 Table M etis Transto mation S Toueis inen a r illa 17 Table A Routine Destinati n earn laa la 18 Table 2 14 Configuration Parameters ot FXS phone numb et siii id AA as 21 Table 2 15 Confisuratiorn Parameters or FXO phone Number aiii A ai st 21 Table 2 16 Configuration Parameters of Phone Features orsin a a i 22 Table 2 17 Configuration Parameters of Trunk Line Features occccccnccccccnnonnnnonnnnnnnnnnnnnnnnnonononnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnncnnnnnnnnnnnnnos 24 Table 2 18 Parameters of system advanced CONO a 26 Table 2 19 Parameters for auto provisions CONSUMO a A 24 Table 2 20 Parameters Tor S NMP COBBPUETAUOPN oasis tecta tag duda icxite s be cutae Fe etant talenti ru a desee ta cane Qa agtie adio esas tetas essc 28 Table 2 21 Parameters TO TRIOS cono UPA ON iets esis etek tatnen ta 28 Table 2 22 Parameters Lor Security COMM b UL UOTIS ione eoo sida deseen id scs reta uid Sao 20 Table 2 23 Media stream configuration parameter eie essen a eroe oo ease aa eda de dae sua ana adi dianas 30 T
31. S 24 MX120 72S 24 CA CA oo oo ON oo 00 ON N P m N P N OAIN NTNTENITNIT Re RY A TO LoI LlOo Figure 1 7 MX120 Front Panel 0 NA S Table 1 13 Description of MX120 Front Panel Description D Matrix of 6x4 LED status indicator on interface card 330 Four interface slots each can contain one 24 port interface card S Note Do not plug and remove the interface cards of MX120 when equipment is powered on Numbering definition of system interface slots on the low left side of chassis is 1 slot marked with No 1 to 24 on the low right side of chassis is 2 slot marked with No 25 to 48 on the up left side of chassis is 3 slot marked with No 49 to 72 and on the up right side of chassis is 4 slot marked with No 73 to 96 Each RJ45 socket has 8 pins leading out 4 pairs of analog telephone or trunk lines in agreement with the pair specifications for Ethernet interfaces whose corresponding relations can be seen in the table below CAT 5 cables are used to connect the interface card and distribution panel in equipment installation New Rock Technologies Inc 8 MX Voice Fax Gateway Series User Manual Standard RJ11 telephone lines can be used to plug in a RJ45 socket The telephone trunk lines are connected to the 3 pair of pins for simple call test Table 1 14 Pin Specifications for MX120 RJ45 Socket Port Analog line pair TIP1 RINGI TIP2 TIP3 RING3 RING2 TIP4 R
32. Table 2 26 Trunk line characteristics configuration parameter Title Gain to IP Gain to PSTN Impedance Outplusing delay Ring relay Busy line handle PSTN failover Caller ID detection mode Inbound first digit timeout Answer delay Off hook for rejection On hook protection time Polarity detection Caller number sending mode Busy detection Repeat On time Off time Detect dual frequency busy tones New Rock Technologies Inc Explanation Set the voice volume gain toward IP side the default 1s O Taking decibel as the unit setting range is 3 9 decibels 3 means declining of 3 decibels 3 denotes the amplification of 3 decibels Set the voice volume gain toward PSTN side the default is 3 Taking decibel as the unit setting range is 6 9 decibels Set the parameter of FXO impedance with the default of 600 ohm The optional settings are below e Complex e 600 Cohm e 900 Cohm Set the time interval between the FXO going off hook and starting outpulsing of the first digit to the PSTN The default is 600 in milliseconds Whether to relay the ring of inbound call to the FXS port when applying to DID The default is Phone ring independently Either a voice prompt or hanging up can be applied to FXO port when an incoming call goes to the FXS port which is in busy This only applies to DID feature Whether to route a call to the PSTN through an FXO port when the IP network fau
33. Trunk Batch After login click Line gt Trunk Batch to open this interface Figure 2 17 Trunk Batch configuration interface Basic Kovin O a Advanced Status togs Tools Info O Feature Trunk Feature batch Logout FXS phone number X Registration SS X Imboundhamdie Bindina XO Voice prompt Dialingtone Cis Trunk batch X Binding number Max 20 digits Polarity reversed signal detection X Call ID detection Outbound blocking X Echo cancellation Connect signal delay Also see Answer delay in page Advanced gt Trunk Submit Step3 Click Y the following interface is shown Choose batch configured trunks and click OK New Rock Technologies Inc 25 MX Voice Fax Gateway Series User Manual Trunk Selected all 18004 E3 Cancel 18005 18006 18007 Step4 Click X to activate this function to configure this parameter For details of the parameter see Trunk Line Features 2 6 Advanced Configuration 2 6 1 System After login click the label of Advanced gt System to open this interface Figure 2 18 Interface of system advanced configuraiton A e di pee System Security White list Media stream SIP Line Trunk RADIUS Encryption Greeting Tones Feature codes Logout NAT traversal Dynamic NAT Y Refresh period more than 14 s default 60 SDP address NAT IP address Local IP address Remote management Management syste
34. a ete edge d eaae AE AENEA EEEE aaa 2 Table T 3 Desertption of MAS Front Panel aee deer eve to Roo EE er uen ads 3 Table 4 Descriptiomot MAS Back Panel outer A A deeem C ire vue ut Gd dsl ot edad Stata le vere cu ee n Paus 3 Table 1 5 Configuration Description of Analog Line Interfaces for All MX8 Models essen 4 Table 1 6 Confieuration combination OF MEX GO ii o eati o edebat oet td tet Lo d debate ud e Co ee o ud died da 4 Table 1 7 Description of MX60 Front Panel darla chives dt cabinets ec ee eth taa i ey e tuus 5 Table 1 8 Pin Specifications for MX60 RJ45 Socket Port ii ada 5 Table E9 Description ot MA 6O Baek Patel uui etn Et ES a a ria 7 Table IO Vicaniios or MX GO Ilic dEOPS rt A AS Aita 4 Table ES PN Omera ee Ca MT Pc 7 Table 1 12 Contisuration Combination Of MATO Diana ia AA SA 7 Table I 13 Desctiptiomot MX 120 Front Panel aia AA AAA AAA AAA AAA a A 8 Table I T4 Pin Specifications Tor MACIZO RIAS Socket POM rusia A e ager id i bukade 9 Table 1 15 Corresponding Relation Between MX120 RJ45 Socket and Line Number ooooooooooonnncccnonnnnnnnnnonnnnonanonnnnncnnnnnnnnnnnnnns 9 Tablet MXA IZO Back Panda A ue T 11 Tables Meanmos ot MXA PO InditoatOfs a da 11 TablertalS MX 120 System Operation State nina 11 Table 2 1 erage Addtess OLGA WA at 1 Pable 2 2Detault P ISS words Or Gateway at A A tad 2 Table 2 3 Network Conti eration Paramete S set erepto sara date aesti ced uassi asi cartes eut bd rade n usas bu n o rua A
35. able 2 24 SIP related contieuratton parameters eerte en A ola ce ec reb da ue dudes v laeta Fee vv aa ur edere ve wu ruga 32 Table 2 25 Subscriber line characteristics configuration ParaMete ccccscccccccccccceceeeseeeeeseeeeeeceeeeeeeceaaeessseseeeeeeeeeeeeeeaaaaeees 34 Table 2 26 Trunk line characteristics configuration parameter oocccccnccccnnnnnnnnnonnnnnnnnnnnnnnnnnonnnnnnnnnnnnnnnnnnnnnnnnnonnnnnnnnnnnnnnnnnnnnnonononos 36 Table 2 27 Contisuration parameter of Radius Call los aiii A a 37 Table 2228 Encryption conticutation parameters dada di 38 Table 2 30 Call progress tone configuration Datattietets e A 40 Table 2 31 Feature codes Comm our avon parame et eere a PE E AA AS Doe aue ug ea 4 Table 2232 ar amie ers Ol Call SEU ccs sass treaties isi A een 43 Table 2553 Parameters OF YSL IS da AAA ASA AAA ASA AAA AAA 45 Table 2 34 Contisuration parameters of Manage LO iia AA ARA A E E 47 MX Voice Fax Gateway Series User Manual 1 Overview 1 1 Product Introduction MX Series intelligent VoIP Gateways MX Gateways are designed to bridge the traditional telecom terminal device into IP networks through SIP or MGCP protocols The main applications include For carriers and value added service providers to provide telephone fax and voice band data services to subscribers using IP access methods such as FTTB HFC and ADSL Used to bridge the traditional telecom terminal equipments such as PBXs to the IP core networks o
36. ack tone with default of 80 Subscribers may select their favorite color RB tone by using this key Note It s required to start color ring service before using this function please see Phone for how to assign the feature to the phone User operation upon off hook the subscriber may press the function key e g 80 then input the two digit index numbers of color ring 80 1s used for hearing and inquiring the color ring that has been previously set The function key for deactivating the color ring with default of 80 The subscriber may use such key to recover the normal ring of phone User operation off hook press 80 hang up The function key for activating the double ring forking feature with default of 75 The function key for deactivating the feature with default of 75 Activate Don t Disturb with default of 72 With DND selected the gateway will reject all coming calls by sending busy tone to the caller Note It s required to start Don t Disturb prior to using this function please see the instructions on relevant configuration of subscriber line The function key to cancel Don t Disturb with default of 72 Dialing the function key may recover normal ringing upon the arrival of incoming calls Define the function key of dial with default of 74 This key allows the user to build a table of 2 digits 20 49 speed dial numbers Note It s necessary to get the dial up service unde
37. acters letters numbers or 96 Case Submit Table 2 22 Parameters for security configuration Parameter Description Telnet Enables or disables the Telnet function Password The Telnet password consists of 6 to 20 characters letters digits or and is case sensitive Confirm password Repeat the Telnet password again Port Enter 2 to 4 digits Ss If the gateway is placed in a public network environment you should disable the Telnet function to prevent hacker attacks 2 6 3 White List After login choose Advanced gt White list to open the white list configuration interface New Rock Technologies Inc 29 MX Voice Fax Gateway Series User Manual Figure 2 23 White list configuration interface pes ars intimos aio A o A A A mh System Security White list Media stream SIP Line Trunk RADIUS Encryption Greeting Tones Feature codes Logout Web management O On Qadd Telnet O On QAdd Allows access to the address Operate Allows access to the address Operate To configure white list with Web GUI as an example perform the following steps Step1 Click Add Step2 In the displayed box enter the addresses that are allowed for access and click OK Step3 Select enable e This function takes effect after the device restarts e The device allows a white list of 20 entries 2 6 4 Media Stream After login click the label of Advanced Media Stream to open this interface
38. aic dea trae pee trans nei aeo oeuvres vete bos eddie ee 2 Contents of Figure A A On Pane ag oca etie et deri cat ceat mese md eaaet men tede dede uteri M dd SL D E UID 3 IgE MXS Back Pane ocni x M saa 3 Figure EON PU Front Pane A aggre 5 Figure 1 4 Schematic Diagram of MX60 Subscriber Line Connection ooooonnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nana 6 Figure 1 5 NEX60 Back Pane HAC vrai titi v ei et ba iei Ex i e t eva ra AAA AAA AAA 6 Faeure 1 6 MEX00 Back Panel DC e dee tbe tbe e m a ai en 6 Figure 1 7 MX 120 Front Panel ett e tee t eie ei it ee tne P n eei tl dedi AAA AAA AA 8 Figure 1 8 Schematic Diagram of MX120 Subscriber Line Connection ccc ccc ccecceseeseseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees 9 Pregre 129 UP RN Back Pane le nC OEI O IO 10 FP ewe dt OVI 20 Back panel DG uso saei ld di 10 Figure 2 1 Loom Interface for MX Gateway Cont SUratiOnl reso diia tt tai 2 E16ure 222 Status tera ai AAA id 3 Eisure 2 5 Network Cont auraton terca ii 1 Figure 2 4 5 ystem C onDburauon nter a iii adi s 6 E1yeute 2 5 SIPC ont cur anon Biter aCe one A A oe E e ten ec a ri REED D e Hoodie A y Figure 226 Hieh availability config A ea 9 Lieure2 7 MGCP Conte urna 10 Eisutfe 225 FAX COMMOUTALION ME iio 12 Figure 2 9 Configuration Interface fo
39. al The valid values are 16 32 and adjust 48 in million seconds Table 2 5 Codec Methods Supported by Gateways Codec Bit Rate Kbit s Time Intervals of RTP Package Sending ms iLBC 20 30 G729A 8 10720 30440 G723 30 60 PCMU PCMA 10 20 30 40 2 3 4 SIP Configuration After login click Basic SIP tab to open the SIP configuration interface Figure 2 5 SIP Configuration Interface Status Network System SIP MGCP FoIP Logout Off v 1 10 Local SIP port will auto select based 5060 increasing the value AAA AAA localhost 5060 e g 168 33 134 50 5060 or www sip com 5060 Perine 7 p ooe OOOO Submit New Rock Technologies Inc 7 MX Voice Fax Gateway Series User Manual Table 2 6 SIP Configuration Parameters Name Description Signaling port Configure the UDP port for transmitting and receiving SIP messages with its default value 5060 Note The signaling port number can be set in the range of 1 9999 but cannot conflict with the other port numbers used by the equipment Auto SIP port selection I n ranked from 1 10 is chosen after the failure registration of signaling port s original configuration the range of signaling port s change varies from original signaling port original signaling port n Register with the new signaling port value signaling port 1 until it succeeds Register server Configure the address and port number of the SIP registration server T
40. al runtime information of gateways can be obtained in this interface including The information about login interface including IP address and permissions of the user SIP registration status Call related signaling and media RTP information After login click the label of Logs gt System Status to open this interface New Rock Technologies Inc 44 MX Voice Fax Gateway Series User Manual Figure 2 37 Interface of System Status AA o EA System Status ul Call Message System Startup Manage Log Login User Info gt gt gt gt gt 1 192 168 250 116 1 SIP Registration Info gt gt gt gt gt not enabled Latest Call Info gt gt gt gt gt empty Call Context Info gt gt gt gt gt empty Rtp Context Info gt gt gt gt gt empty Refresh Table 2 33 Parameters of System Status Title Explanation Login User Info Show the IP address and permissions of the login user The numbers following the IP address show the online permission level of the user 1 administrator 2 operator 3 viewer The viewer can only read the configuration When more than one administrator logs in at the same time the first login s permission level is 1 others are 3 also when more than one operator logs in at the same time the first one s permission is 2 others are 3 SIP Registration Info Show registration status e Not enabled
41. all working in active status Under the coarse grained scheme all endpoints of a gateway are allowed to register on one of the designated servers and under the fine New Rock Technologies Inc 1 MX Voice Fax Gateway Series High Availability Configuration Guide grained scheme the endpoints of a gateway are allowed to register on multiple servers according to the administrator s load balancing plan The following features are supported with load balancing e The gateway as a whole or endpoints search for the designated sever in the server cluster a list of servers using REGISTER INVITE message in forward circular scheme e Server failure detetion is supported by gateway sending OPTIONS to each servers on which the gateway or endpoints are registered on e Upon the condition of no response to OPTIONS or REGISTER INVITE the gateway will search for the next available servers for the gateway or endpoints and move the calls to them accordingly The gateway will redirect call traffic to the designated proxy server in responding to the re INVITE from the server 3 1 2 Server Cluster The server cluster includes one primary SIP proxy server and one backup SIP proxy server under primary standby mode one primary SIP proxy server and up to five standby proxy servers under active standby mode or six active servers under load balancing mode The address of the SIP server can be configured manually by the administrator or obtained through DNS SRV reco
42. ax Gateway Series User Manual Table 1 9 Description of MX60 Back Panel Description Ground Pole Indicator see Table 1 10for description USB Interface reserved for future use Configuration interface CON Ethernet lines used for local management and debugging Two Ethernet interfaces one IP address Cooling fan AC power socket 100 240 VAC voltage input or 48 V DC input 9101010100 6 Table 1 10 Meanings of MX60 Indicators Mark Function Status Description BWR Power Power on Indication Power off Si System locked and inactive Indication Normal operation No alarms Keka Alarm New alarms occurred but not confirmed Indication System in the process of powerup and not in the normal operation mode Red Alarms existed and all alarm information confirmed 1 3 3 MX120 The device of MX120 can hold four interface cards which enable to flexibly configure FXS and FXO ports And each card equips up to 24 ports MX120 can provide up to 96 ports It supports the following configurations Table 1 11 MX120 interface card Table 1 12 Configuration Combination of MX120 Models Number of FXS Ports Number of FXO Ports MX120 72S 0 MX120 96S 0 72 96 MX120 72FXO MX120 96FXO N New Rock Technologies Inc 7 MX Voice Fax Gateway Series User Manual Models Number of FXS Ports Number of FXO Ports MX120 64S 8 MX120 88S 8 MX120 608 12 MX120 845 12 MX120 56S 16 MX120 80S 16 MX120 52S 20 MX120 76S 20 MX120 48
43. batch Trunkbatch Logout Submit FXS 15t line No Feature Trunk EXS phone number EXO phone number Table 2 14 Configuration Parameters of FXS phone number Name Description FXS Ist line No This number is used for the batch setup of consecutive number of subscriber line Click Batch after filling in initial number the number of Line adopts initial number that of Line 2 increases 1 progressively based on that of Line 1 and so on You needn t fill in if you do not use batch configuration or the number is not consecutive IDn Fill in the telephone number associated with the subscriber line n FXS port This should be manually performed if Batch mode is not used 2 5 2 FXO Phone Number After login click Line gt FXO phone number tab to open the configuration interface Figure 2 13 Configuration Interface for FXO phone number Trunk batch Logout Submit Feature Trunk Feature batch FXO phone number FXS phone number FXO 1st line No ID1 8004 ID2 8005 8006 8007 Table 2 15 Configuration Parameters of FXO phone number Name Description FXO Ist line This number is used for the fast setup of consecutive number of trunk line Click Batch after filling No in initial number the number of Line 1 adopts initial number that of Line 2 increases 1 progressively based on that of Line 1 and so on You needn t fill in if you do not use batch configuration or the
44. bscriber Subscriber MX8 68 2 Trunk Trunk Subscriber Subscriber Subscriber Subscriber Subscriber Subscribe Line 1 Line 2 Line 1 Line 2 Line 3 Line 4 Line 5 r Line 6 Subscriber Subscriber Subscriber Subscriber MX8 88 Subscriber Subscriber Subscriber Subscriber Subscriber Subscriber Subscriber Subscribe Line 1 Line 2 Line 3 Line 4 Line 5 Line 6 Line 7 r Line 8 Trunk Trunk Trunk Trunk Trunk Trunk Trunk Trunk Trunk Trunk Trunk Trunk MX8 48 4 Subscriber Subscriber Subscriber Subscriber Trunk Trunk Trunk Trunk Line 1 Line 2 Line 3 Line 4 Line 1 Line 2 Line 3 Line 4 1 3 2 MX60 Designed with a 1U high and 19 wide compact chassis MX60 is suitable for installation in a standard cabinet MX60 has a built in power module with the rating voltage of 100 240 V AC or 48 V DC DC is optional The interface card of MX60 uses a RJ 45 socket and is connected to the distribution panel in equipment room using CAT 5 cables supplied with the unit MX60 offers up to 48 interfaces of FXS FXO MX60 supports the following types of configuration Table 1 6 Configuration combination of MX60 Models Number of FXO Ports New Rock Technologies Inc 4 MX Voice Fax Gateway Series User Manual Figure 1 3 MX60 Front Panel 2 NO 0 A OV 0 Table 1 7 Description of MX60 Front Panel Description DG Three interface slots each can correspond with four RJ45 sockets each RJ45socket can correspond with
45. d for registering of this line here Note The following features are valid only in SIP protocol When the gateways use MGCP protocol features are controled by the proxy server without the need for setting on the gateway Hot line Select if the gateway is required to automatically dial out the hotline number after offhook By default hot line is disabled e Disable hot line close this feature e Hot line automatically dial out the hotline number after offhook e Delay mode automatically dial out the hotline number when the offhook is timeout with a time delay of 5 seconds Hot line number After the hotline function is activated on this line the hotline number must be entered here CRBT Color Select it to activate CRBT Color Ring Back Tone and choose an audio file as ring back tone ring back tone There are two dat files in the G 729 coding format fringl dat and fring2 dat storage in MX for factory default You can upload wav files through the Web GUI for details see 2 6 10 Greeting Speed dials Select if the Speed dials is activated on this line By default this 1s not selected Call forwarding Select if Call forwarding is activated on this line By default it is not selected Forking Select to activate Forking Forking allows the gateway to initiate a call to another telephone terminal while ringing on this line terminal Either terminal may answer terminating ringing on the other terminal Release control Select if th
46. dile upload 50 RW tet OE RAC MOr ela EA o atta tote uh ote te EE E eb iier 50 Feme 2 4 Screen Ob upprade DEOCGSS lo cocos 51 Figure 2 45 Interface oft successruL UDOrdde iia 51 Faeure2 49 Intettace or HI VE Cap Cire ai 53 LEieure 2 50 Intertace Ob Ethercal CAPITELES n Se eu o S eru a ub o dut a edu uo a mauu oe mad unen 53 Figure 225 Interface of Version JDIO 2 53 coo euet de eeu eet deoa a t ee be o deu n PNE N EN eR eua apod our su io pu du cse da eit 54 Fieure2sI Server cluster 65 ie tec t e ti ecd t ae tb e ee Dedi ide t dd ee en b dad ra ends 2 Figure 3 2 Prmary Standby cotifieuratiOn Page tada etae oce ete ek tute tudin eta di aque eda ebat ubi 1 Figure 3 3 Actives tandby contreuration Pane i ae s aestu o a Go bee ot d dede be da e de uai ee o beau asado 2 Fieure 9 4 Pasce T0 Seb eG Si ar Sel Vel 6 eda a dde 3 Fiure 25 Rage lo set DN SSCL Ver sss e do en et Nate ne QN Eri Nate E E aeo S NE MM M LEE 4 Fieure 9 0 Pase to Set allover Cond ON soe oer di 1 Exeure 3 PASC AO disable PST N EQUIOVGE aset tt tata aD dite dur ts 5 Lisure 3 5 Load balancing configuration pate ou cic eqe scri eiui ed eL EXE SUUS AA A A IAEA Ha stad Ue dudas ete emu ii 1 Pisure 3 9 Paseo contisure OPTION S settines tai id 2 Figure 3 10 Pase to contisure REGISTER Settings ui AAA CE EEE EEE NENEA EEEa 2 Contents of Table Table EL MX series gateway hardware specifications ads 1 Table 1 2 COMMON Configuration Combination Of M XS ses cusianctcodctent nti ree etas tas
47. e 2 26 Subscriber line characteristics configuration interface 0 ccccceceeseeeeeeseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees 33 Fisute 2 27 Trunk Due characteristics COMMGURAILOM INGCTLACE 3 55 v rea tcr Ra ERE SOON H o OPES reae usen exui EE ENE TE eee 35 Figure 2 285 Configuration mtertace of Radius Call IO8S iii Sea 37 Figure 2 29 Bncry DIOR contrguratiom Intera eorr ace td 38 Eire 2 30 Greene E aeiia eed acea atat AAA 39 Figure 2 31 Call progress tone configuration interface 0 ccccccccecesseseessssssssssssessssssssssssssseseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees 39 Figure 2 32 Feature codes configurato Intet aC8 A AAA AAA sv es uu Susan adios tala eed dosnt 4 Figure 2 525 Intertace of call Status siria A AAA A NEN HN ae ele ei eee 43 Figure 2 34 Interface of call om FX S veria il tt NY A SE e A A AA Ad 43 Figure 2 55 Intestace of call on FXO iie e ain ended en a eri EE E 44 Fieure 2 50 Intertace oP SIP messase COUTE de a tt adi 44 I3eure 2 37 Intemdce Or Sy Sten cOn 45 retire 2 30 Call SS RIORUM ace MEM nen eo ene eee 46 Foire 2239 Miler aCe Or SV Ste Hl aa tt Ss testa 46 Loue 2 40 Intetlaceor Manage LO dt A A AAA AA AA 47 Fisnute2 4 1 Interface tor Password Chanina aria di laa 48 Fizu 2 47 TIntertace Ob export AAA AAA 48 FEreure 2 43 Intertace of Import AA oerte e ERE eee e e e E ee EE bae e scd ee Rs 49 kieue 2 44 Interface or UD OPAC ouod acetate A IN 49 I35ure 2245 Interrace or
48. e SIP message header mainly describes the message sender and receiver SIP message body mainly describes the specific implementation method of the dialog Message of request the SIP message sent by a client to the server for the purpose of activating the given operation including INVITE ACK BYE CANCEL OPTION and UPDATE etc Message of response the SIP message sent by a server to the client as response to the request including Ixx 2xx 3xx 4xx 5xx and 6xx responses Message header Call ID Parameter line Via From To Contact Csq Content length Max forward Content type White Space and SDP etc MX gateways provide good flexibility in content setting in order to improve compatibility with the SIP register server After login click the label of Advanced SIP to open this interface New Rock Technologies Inc 31 MX Voice Fax Gateway Series User Manual Figure 2 25 SIP related configuration interface Mee Roog me o 9m A A System Security White list Media stream SIP Line Trunk RADIUS Encryption Greeting Tones Feature codes Logout SIP related configuration 86400 RFC3842 60 172800 s default 86400 Also see Subscribe MWI in page Line gt Feature PRACK LJ RFC3262 MWI subscription Session timer RFCA4028 1800 1800 Session interval s rang max 10 digits default 1800 Request Response Configure Contact field in REGISTER NAT IP address
49. e account for registration and it has no default value Note If Register by gateway or Line Reg GW Auth is selected the user name must be entered here If register by line is selected the user name should be set on Line gt Feature page Refer to Feature gt Password Password as part of account information is used for authentication by platform It has no default value It is formed with either numbers or characters and case sensitive Note If Register by gateway or Line Reg GW Auth is selected the password must be entered here If register by line 1s selected the password should be set on Line gt Feature page Refer to Feature Registration period Valid time of SIP re registration in seconds Its default value 600 2 3 5 High Availability Configuration After login Choose Basic gt SIP to open the configuration interface For details see section 3 Appendix High Availability Configuration New Rock Technologies Inc 8 MX Voice Fax Gateway Series User Manual Figure 2 6 High availability configuration High availability Primary Standby Backup SIP proxy server 192 168 1 101 5060 OPTIONS request period 60 Table 2 7 Parameters Parameter Mode Primary Standby Backup SIP proxy server Primary server heartbeat detection OPTIONS request period Active Standby SIP proxy server setting Fault condition OPTIONS request period OPTIONS r
50. e call release is controlled by the caller By default this is not selected Note Also see by caller Caller release on page Advanced Line e Selected the gateway will immediately release the call upon caller hanging up the gateway will not release the call after the called party hanging up as long as the caller is still off hook until timeout 60 seconds by default e Unselected the gateway will immediately release the call upon either party hanging up the call New Rock Technologies Inc 22 MX Voice Fax Gateway Series User Manual Name Description Loop open Select it only if the trunk of the PBX supports loop open signaling in which disconnect the PBX takes the loop open as the indication of disconnection Note Loop open interval can be configured on the Advanced gt Line page RFC6913 If this item is selected the Fax over IP label carried in INVITE is supported Call waiting Select 1f Call waiting 1s activated on this line By default this 1s not selected Call hold Select it to enable Call Hold on this line By default this is not selected Caller transfer Note If this function is enabled the gateways will automatically activate Call Transfer Select 1f Caller Transfer 1s activated on this line By default this 1s not selected When A calls B B picks up the call and A transfers the call to C Note The call hold must be activated before caller transfer Caller ID Set whether the number of this telephone is sent to the
51. e function key for deactivating unconditional call forwarding with default of 60 User operation off hook press 60 hang up Activate CFB The function key for activating call forwarding on busy with default of 61 Dialing this key may activate CFB and specify the destination number Note It s required to enable call forwarding on busy service before using this function please see the instructions on relevant configuration of subscriber line Deactivate CFB The function key for deactivating call forwarding on busy with default of 61 User operation off hook press 61 hang up New Rock Technologies Inc 41 Title Activate CFNR Deactivate CFNR Activate CRBT Deactivate CRBT Activate forking Deactivate forking Activate DND Deactivate DND Enable speed dials Speed dial prefix Suspend call waiting Blind call transfer Audit CRBT 3 way New Rock Technologies Inc MX Voice Fax Gateway Series User Manual Explanation The function key for activating call forwarding on no answer with default of 62 Dialing the function key may activate call forwarding on no answer and specify destination number Note It s required to enable call forwarding on no answer service before using this function please see the instructions on relevant configuration of subscriber line The function key for deactivating call forwarding on no answer with default of 62 The function key for activating color ringb
52. e upgrade files New Rock Technologies Inc 49 MX Voice Fax Gateway Series User Manual Figure 2 45 Interface of file upload EE E mM A m AA o mU Logout Change password Export data Note The extension of the uploaded file is gz Import data Upgrade Restore factory settings Restart Reboot TDM capture Ethereal capture Step4 Click Upload Step5 Uploading will be completed in about 30 seconds then click Next Figure 2 46 Upgrade interface A a A o BBE Logout Change password Export data Click Upgrade to start the upgrade Import data Upgrade Step6 The following prompt appears during the upgrade New Rock Technologies Inc 50 MX Voice Fax Gateway Series User Manual Figure 2 47 Screen of upgrade process A A A A E Logout Change password Export data Import data Upgrade Note A few minutes are needed to upgrade the gateway Don t operate the gateway during this period Step7 After success in upgrade the following dialog will appear click Confirm Figure 2 48 Interface of successful upgrade m A BEN LN A A Too Logout Change password Export data Import data Restore factory settings TDM capture Ethereal capture Step8 The gateway is on the progress of reboot when the interface cannot be displayed Step9 Wait for about two minutes and access the interface of gateway management system click Version info and check the software version N
53. e whether to use corrective mode of fax By default it is not selected Receive gain Set the receiving gain of T 38 fax with the default of 6dB New Rock Technologies Inc 12 MX Voice Fax Gateway Series User Manual Name Description Transmit gain Set the transmission gain of T 38 fax with the default of OdB Packet size Set the packet size of T 38 30 milliseconds is the default value Redundancy Set the number of the redundant frames in T 38 date package default is 4 2 4 Routing 2 4 1 Digit Map After login click Routing gt Digit Map tab to open the dialing rules interface Figure 2 9 Configuration Interface for Dialing EM Digit Map Routing Table IP Table 01 3 5 8 xxxxxxxxx i 0 9 O10xxxxxxxx The numbers from 0 to 9 and the signs and are the O2XXXXXXXXX permitted dialing characters O 3 9 Xxxxxxxxxx x The x sign can match with any numbers For example the x sign can match with 1 or 2 The sign can match with multiple values For example 1 3 5 8 xxxxxxxxx the value 1 can match with 11 or 123 2 3 5 7 XXXXXXX 8 1 9 xxxxxx E 80 1 9 xxxxx Indicates the dialing event ends due to timeout For example the value x T indicates that a subscriber dials multiple numbers andthe dialing events time out Then 40 1 9 xxxxx the system considers that the dialing events end 400XXXXXXX XXXXXXXXXxx T Defines subsets of the match character For example Ne the value 1 3 5
54. equest timeout Active SIP server Switchover Load balancing SIP proxy server setting OPTIONS request period OPTIONS request timeout REGISTER request timeout Active server list New Rock Technologies Inc s range 1 86400 Description High availability can be configured as Primary Standby Active Standby or Load Balancing mode Configure the address and port number of the backup SIP proxy server When the primary SIP server faults the gateway failovers from the primary server to the backup server automatically Select it to send OPTIONS request to the primary SIP server all the time e If the gateway does not receive any response to OPTIONS request it failovers to the backup server e After failover to the backup server the gateway will still send OPTIONS to the primary server It switches back to the primary server once the response to the OPTIONS request is received The interval between receiving the response 200 from the SIP server to the previous OPTIONS and sending the next OPTIONS A maximum of five servers can be added e No response to OPTIONS request e No response to REGISTER INVITE request The interval between receiving the response 200 from the SIP server to the previous OPTIONS and sending the next OPTIONS The period since the sending of the last OPTIONS with no response by the SIP server This parameter displays the current SIP server address If you click Switchover the gateway p
55. erforms switchover to the next available server in sequence based on the SIP server list For details about how to configure SIP server please see 3 3 2 Configuring SIP Server A maximum of five SIP servers can be added The interval between receiving the response 200 from the SIP server to the previous OPTIONS and sending the next OPTIONS The period of time since the sending of the last OPTIONS with no response by the SIP server The period of time from the sending of the first REGISTER with no response by the previous SIP server to the sending of REGISTER to the next SIP server This parameter displays all SIP server IP addresses on which the gateway 1s registered MX Voice Fax Gateway Series User Manual 2 3 6 MGCP Configuration The gateways use SIP protocol by default When the gateways need to interface with MGCP protocol based softswitch platform set the relevant parameters here After login click Basic gt MGCP tab to open the configuration interface Figure 2 7 MGCP Configuration Interface Status Network System SIP MGCP FoIP Logout Proxy server e g 46 33 136 50 2727 or www proxy com 2727 LD G Valid value A B D G H L M T Default L D G Netalowed T CR for End of Line Quarantine default to loop Enable first digit timer Using configured digit map Using notify instead of 401 402 No name in default package Keep connection when on hook Submit Table 2 8 MGCP
56. eries User Manual Table 2 25 Subscriber line characteristics configuration parameter Title Gain to IP Gain to terminal Impedance Min hookflash Max hookflash Hook debouncing Ring frequency Ring voltage Caller release Outpulsing delay Loop open interval Polarity reversal Polarity reversal delay Call ID transmit Music on hold Call waiting with hunt group New Rock Technologies Inc Explanation Set the voice volume gain toward the IP side the default is O Taking decibel as the unit setting range 1s 3 3 decibels 3 means declining of 3 decibels 3 denotes the amplification of 3 decibels Set the voice volume gain toward FXS port side the default is 3 Taking decibel as the unit setting range is 6 3 decibels 3 means declining of 3 decibels 3 denotes the amplification of 3 decibels Select the parameter of FXS port line impedance and the default value is 600 ohm The optional values as below e Complex e 600 Cohm e 900 Cohm Used by the gateway to detect Hook Flash event the default is 75 milliseconds The gateway will ignore any flash that fall short of the shortest flash time Generally this value should not be less than 75 milliseconds Used by gateway to detect hook flash the default is 800 milliseconds The gateway will regard the flash duration between Min hookflash and Max hookflash as effective flash Any flash lasting over the longest time will be considered by
57. erminate receiving digits and send all the numbers before key Terminate after receiving and any two digit number xx 1s primarily used to activate function keys for supplementary services such as CRBT Call Transfer Do not Disturb etc Terminate after receiving and any two digit number xx is primarily used to stop function keys for supplementary services such as CRBT Call Transfer Do not Disturb etc A 7 digit number starting with of any number between 2 8 used to terminate the dialing An 11 digit number starting with 02 used to terminate the long distance dial string starting with 02 A 12 digit number starting with 013 used to terminate long distance dial strings An 11 digit number starting with 13 used to terminate long distance dial strings A 3 digit number starting with 11 used to terminate the dial string of emergency calls A 5 digit number starting with 9 used to end special service calls Send away when the set number like 17911 is received Dial rules by default as follows 01 3 5 8 xxxxxxxxx OlIOxxxxxxxx ZXXXXXXXXX 0 3 9 XXXXXXXXXX 120 11 0 2 9 111xx 123xx OSxxx 100xx 1 3 5 8 xxxxxxxxx 2 3 5 7 xxxxxxx 8 1 9 xxxxxx SO 1 9 xxxxx SOOXXXXXXX 4 1 9 xxxxxx 40 1 9 xxxxx 400XXXXXXX XXXXXXXXXx T x T x HXX New Rock Technologies Inc 14 MX Voice Fax Gateway Series User Manual XX THE 2 4 2 Routing Table After login click Routing Routin
58. erwrites the original one If you want to delete the current color ringback tone you can click Delete After the gateway restarts the default color ringback tone is used 2 6 11 Call Progress Tone Plan After login click the label of Advanced gt Tones to open this interface Figure 2 31 Call progress tone configuration interface A A Re IMR ul A E System Security White list Media stream SIP Line Trunk RADIUS Encryption Greeting Tones Feature codes Logout Country Region China v 350 440 Indicates the dual frequency tone of 350 Hz and 440 Hz maj Message waiting 480 620 500 0 500 Indicates that the dual frequency tone of 480 Hz and 620 Hz is played with half second on and half second off The value 450 100 0 100 450 100 0 100 450 100 0 100 450 0 0 500 indicates the mute of 500 ms 440 300 0 10000 440 300 0 10000 Indicates that the single frequency tone of 440 Hz is played twice with 300 milliseconds on and 10 seconds off copo Ring back 450 1000 0 4000 Call waiting 450 400 0 4000 950 333 1400 333 1800 333 0 1000 Indicates that the tone of 950 Hz is played for 333 milliseconds the tone of 1400 Hz is played for 333 milliseconds the tone of 1800 Hz is played for 333 milliseconds and the mute is retained for one second Such a sequence is repeated consecutively 450 100 0 100 450 100 0 100 450 100 0 100 Submit New Rock Technologies Inc 39 MX Voice Fax Gate
59. ew Rock Technologies Inc 51 MX Voice Fax Gateway Series User Manual For MX100 and MX120 gateways the software upgrade operation must be conducted on the 100M Ethernet port 2 9 5 Restore Factory Settings After login click Tools gt Restore factory settings to restore the factory settings The factory settings are designed based on common applications and therefore no need to modify them in many deployment situations 2 9 6 Software Restart After login click Tools gt Restart to restart the gateway making modified configuration come into effect In most cases there is no need to reset the gateway and the modified parameters will come into effect upon confirming the Submit 2 9 7 System Reboot After login click Tools gt Reboot to restart the gateway As this 1s a system wide reset 1t takes longer time e Generally it s sufficient to restart software when the gateway confirms to reset the system reboot will be required only when network settings of the gateway are changed 2 9 8 TDM Capture After login click Tools TDM capture to open this interface This tool can be used to capture the voice stream from the Phone or Line interface The capture starts from the off hook if it is a Phone interface or from the ringing if it is a Line interface and is ended on on hook or call release When the call lasts longer than 200 seconds only the first 200 seconds of voice stream will be captured The vo
60. f carriers Connected with PBX of enterprises to provide IP based voice private network solutions for institutions enterprises and schools Used as remote acces equipments for IP PBXs in call center deployment MX Series includes MX8 MX60and MX120 subseries Their features are similar with the main differences as follows Table 1 1 MX series gateway hardware specifications 2 8 Power MXS8 Plastic Desktop MPC852T 64MB 16MB 5 9 VDC Casing MX60 16 48 Rack AT91SAMO9 64MB 16MB 100 240 VAC G20B MX120 48 96 19 Wide Rack MPC8247 128M 16MB 100 240 VAC and 2U B 48 VDC High Optional Hardware of MX series gateways use high performance CPUs ensure that each product of the series can achieve full capacity concurrent calls with high speech quality MX gateways software adopts the stable and reliable embedded Linux operating system OS thereby implementing scores of business phone functions including call forwarding call transfer call hold teleconference caller identification Do Not Disturb ringback tone hunt group simultaneous ring distinctive ring one phone with two numbers and fax In addition MX gateways are featured with FXO port second stage dialing with voice prompt routing table with a maximum of 500 entries pone digit manipulation and PSTN failover upon power off or network disconnection MX gateways support local and remote management operations through Web GUI or Telnet and also supp
61. g Table tab to open the configuration interface Figure 2 10 Configuration Interface for Routing Table I Digit Map Routing Table IP Table Logout Submit Help Click Help to open the illustrative interface for routing configuration o Pei i ine aaea Status Logs Tools Info Routing Rules 1 Matching from top to bottom 2 100 rules are allowed 3 When there is no rule matched the call will be processed as follows a If itis a outgoing call the call will be ourted to SIP proxy b If itis a incoming call the call will be routed according to its called party number if the called party number does not exist 404 will be returned 4 When matched port is not in idle state 486 will be returned for FXS port and 503 will be returned for FXO port 5 When domain name is used in rule DNS must be selected and enabled first Examples 1 Remove digits x ALOA l Retrun The routing table with 500 rules in capacity provides two functions including digit transformation and call routing assignment Here are the general rules applied by gateways when executing the routing table Ss Note e Rules must be filled out without any blank at the beginning of each line otherwise the data can t be New Rock Technologies Inc 15 MX Voice Fax Gateway Series User Manual validated even if the system prompts successful submittal e The routing table is empty by default The gateways will point a call to the SIP p
62. g with 021 for calls from FXS ADD Add prefix or suffix to number A positive number behind ADD is the prefix a negative number is suffix Example 1 FXS1 CPNX ADD 021 FXS2 CPNX ADD 010 Add 021 in front of calling numbers for calls from FXS port 1 add 010 in front of calling numbers for calls from FXS port 2 Note CPNX denotes to any calling party number Example 2 FXS CPN6120 ADD 8888 Add 8888 at the end of the calling number starting with 6120 for calls from an FXS Phone fax port REPLACE Number replacement The replaced number follows REPLACE Example FXS CPN88 REPLACE 2682000 Replace the calling number beginning with 88 for calls from FXS port with 2682000 REPLACE Another use of REPLACE is to replace the specific number based on another number associated with the call For example replace the calling number according to the called number Examples FXS 12345 REPLACE CPN 1 8621 FXS CPN13 REPLACE CDPNO 0 For calls from FXS ports with called party number of 1234 remove one digit at the end of the calling number and add 8621 for calls from FXS ports with calling party number starting with 13 add O at the beginning of the called number END or ROUTE End of number transformation From top to bottom number transformation will be stopped when END or ROUTE is encountered the gateways will route the call to the default routing upon detecting END or route the call to the designed routing after detecting ROUTE Example 1 FXS
63. ge is only used for configuring gateways with trunks FXO port After login click Line gt Trunk tab to open the configuration interface Figure 2 15 Configuration Interface for Trunk Line Features A i ee ABTA Ay ps A O nes EXS phone number FXO phone number Feature Trunk Feature batch Trunk batch Logout e D Voice prompt Dialing tone Caller ID detection C Polarity reversed signal detection Outbound blocking 7 Connect signal delay Also see Answer delay in page Advanced gt Trunk Submit Echo cancellation New Rock Technologies Inc 23 MX Voice Fax Gateway Series User Manual Table 2 17 Configuration Parameters of Trunk Line Features Name Description Trunk ID Select a trunk line required to configure FXO n corresponds to the Line gt FXO phone Number ID n Copy the configuration of FXO n for selected line to FXO n 1 FXO m by clicking Batch where n indicates the current selected trunk number and m indicates the total number of trunks Phone number Display phone number associated with the trunk set in Line FXO phone Number Registration Select if this trunk registers with the SIP registration server By default this is not selected Password If Registration is selected the authentication password for register of this line must be entered here Note The following features are valid only in SIP protocol When the gateways use MGCP protocol
64. he address and port number are separated by It has no default value The register server address can be an IP address or a domain name When a domain name is used you must activate DNS service and configure DNS server parameters on the network configuration page E g 168 33 134 51 5000 or www sipproxy com 5000 Proxy server Configure the IP address and port number of the SIP proxy server The address and port number are separated by There is no default value The proxy server address can be set to an IP address or a domain name When a domain name is used you must activate DNS service and configure DNS server parameters on the network configuration page For example 168 33 134 50 5060 or www sip com 5060 User agent domain This domain name will be used in INVITE messages If it is not set here the gateways will name use the IP address or domain name of the proxy server as the user agent domain name It has no default value It is recommended that subscribers not use LAN IP address to set the domain name parameter Authentication mode The gateway supports three registration schemes register per line register per gateway and Line Reg GW Auth The default value is register by line e Register by line authentication and register per line e Register by gateway authentication and register per gateway e Line Reg GW Auth register per line but authentication per gateway User name Configure the user name as part of th
65. hile the operator is limited to browsing When multiple users with the same level of permission log in the first may modify while the others may only browse New Rock Technologies Inc 2 MX Voice Fax Gateway Series User Manual Ss Note o e The system will confirm timeout if users do not conduct any operation within 10 minutes after login They are required to log in again for continuing operations e Upon completion of configuration click the Logout button to return to the login page so as not to affect the login permission of other users e To ensure system security please choose Tools gt Change password and change the password when you log in for the first time For details see section 2 9 1 Change Password 2 2 Buttons Used on Gateway Management Interface Submit buttons are at the bottom of the configuration screens Submit Button submit configuration information Users click Submit button after completion of parameter configuration on a page A success prompt will appear if configuration information is accepted by the system if a The configuration takes effect after the system 1s restarted dialog box appears 1t means that the parameters are valid only after a system restart it is recommended that users press the Restart button on the Tool page to enable the configuration after changing all parameters to be modified 2 3 Basic Configuration 2 3 1 Status After login open the Basic tab page to view device informati
66. ice file is stored on the gateway in PCMU format New Rock Technologies Inc 52 MX Voice Fax Gateway Series User Manual Figure 2 49 Interface of TDM capture A A A BBE Logout Change password Import data Description Upgrade This tool can be used to capture the voice stream from the FXS FXO interface The capture starts from the off hook if it is an FXS interface or Restore factory settings from the ringing if it is an FXO interface and is ended on on hook or call release When the call lasts longer than 200 seconds only the first 200 seconds of voice stream will be captured The voice file is stored on Restart the gateway in PCMU format Reboot Steps 1 Select the analog line ID to which you want to perform the capture 2 Click Start to initiate the capture proceedure 3 Make the test call 4 Click Stop to terminate the capture proceedure You will be notified for donwload TDM capture Ethereal capture Step1 Select the analog line ID to which you want to perform the capture Step2 Click Start to initiate the capture procedure Step3 Make the test call Step4 Click Stop to terminate the capture procedure You will be notified for download 2 9 9 Ethereal Capture After login click Tools gt Ethereal capture to open this interface You are allowed to capture up to three IP voice data files each with up to 2M bytes The data files are stored on the gateway in dump cap format under catalog var log
67. if this parameter is selected If unselected the system sends a 200 OK message to the platform after off hook on the FXO port Also see Answer delay on page Advanced gt Trunk 2 5 5 Feature Batch After login click Line gt Feature Batch to open this interface New Rock Technologies Inc 24 MX Voice Fax Gateway Series User Manual Figure 2 16 Feature batch configuration interface Basic Routing G Advanced Status 0 Doe Tools Info Feature Trunk Feature batch Trunkbatch Logout X Hotline number Max 20 digits X CRBT Color ring back tone X CRBTID X Speed dials Valid values for speed dial index must be 20 49 Configure X Speed dial list syntax is Index Number and separate multiple settings with e g 20 61131568 21 13866688888 me X Call forwarding CF x CFNR x CF X Forking O S X Forking number Fork to additional number for example a cell phone number 14 x 4 J Release control by caller Call waiting X CID on call waiting Calhold X Caller transfer Caller ID display Caller ID restriction Outgoing call barring DND Do Not Disturb DDI Direct Dialing in Polarity reversed signal i Step1 Click E the following interface 1s shown Choose batch configured features and click ok Line Selected all O EN Cancel Step2 Click X to activate this function to configure this parameter For details of the parameter see Subscriber Line Features 2 5 6
68. iguration Guide Figure 3 3 Active Standby configuration page Status Network ua SIP MGCP FoIP Logout Signaling port 5060 range 1 9999 default 5060 Auto SIP port selection Off 1 10 Local SIP port will auto select based 5060 increasing the value Registrar server 192 168 1 100 Proxy server 192 168 1 100 e g 168 33 134 50 5060 or www sip com 5060 User agent domain name e g www gatewaysip com Registration mode Per line Y Password You may obtain it from service provider Registration period 600 s range 15 86400 default 600 High availability Mode Co Backup SIP proxy server Primarastandby St ndby Primary server heartbeat dereio SOM Load balancing OPTIONS request period 60 s range 1 86400 Submit 3 3 2 Set SIP Servers Configuring the IP Address of SIP Servers Note The IP address of the primary SIP server is configured on the top half of the SIP page Here are the steps to configure the IP addresses of the standby SIP servers Step10 Ensure that active standby feature is enabled Step11 Fill primary SIP server IP address in Registrar server and then submit Step12 Click Add and fill the IP addresses for the standby SIP servers in Standby SIP servers New Rock Technologies Inc 2 MX Voice Fax Gateway Series High Availability Configuration Guide Figure 3 4 Page to set registrar server Status Network system SIP
69. ing Support security settings such as white list 1 3 Equipment Structure 1 3 1 MX8 MXS is the product with smallest capacity in MX Gateway Series Designed with small plastic structure for desktop placement MX8 can provide up to 8 analog line interfaces MX8 supports the following types of configuration Table 1 2 Common Configuration Combination of MX8 Models Number of FXS Ports Number of FXO Ports MX8 2S 2 2 MX8 6S 2 2 New Rock Technologies Inc 2 MX Voice Fax Gateway Series User Manual Models Number of FXS Ports Number of FXO Ports Figure 1 1 MX8 Front Panel bar Table 1 3 Description of MX8 Front Panel Description QD Power indicator PWR Light on indicates that it has been powered Steady on indicates valid Ethernet link flashing indicates Ethernet activities receiving and or transmitting O Analog subscriber line FXS or analog trunk FXO interface indicator Light on indicates that it is in use Figure 1 2 MX8 Back Panel Table 1 4 Description of MX8 Back Panel Description ey Power interface 5 9 VDC input New Rock Technologies Inc 3 M X Voice Fax Gateway Series User Manual Description 10 100 M Ethernet Interface RJ45 0 Analog subscriber line FXS or analog trunk FXO interface Table 1 5 Configuration Description of Analog Line Interfaces for All MX8 Models MX8 RJ11 Interface Configuration Models 1 fa ja fa J5 6 7 Trunk Trunk Su
70. ing port assignment of the gateway the default value is 4660 Signaling port number may be set at will but cannot conflict with other ports of equipment New Rock Technologies Inc 38 MX Voice Fax Gateway Series User Manual 2 6 10 Greeting After login choose Advanced gt Tones to open the audio files interface Figure 2 30 Greeting interface System Security White list Media stream SIP Line Trunk RADIUS Encryption Greeting Tones Feature codes Logout Audio files must be with wav for extension file name can only contains letters and numbers Wav files no larger than 292 k Equipment support only 22 050 kHz sampling rate 8 000 kHz sampling rate and wav files other sampling rate is not supported Second Stage Dialing configuration File name must be welcome ie Voice Prompt welcome Delete CRBTID File name must be fring1 3 Tone fring1 Delete Tone 2 fring2 Delete Tone 3 Delete Table 2 29 Parameters for greeting Parameter Description Second Stage Dialing Click Browse and then select the local audio file named welcome wav Click Upload The Configuration uploaded audio file overwrites the original one If you want to delete the current customized second stage dialing tone click Delete After the gateway restarts the default second stage dialing tone is used CRBT ID Click Browse and then select the local audio file named fring1 2 3 wav Click Upload The uploaded audio file ov
71. latform with RFC 2833 e Server SIP INFO transmitting the flash off to platform with SIP INFO New Rock Technologies Inc 6 MX Voice Fax Gateway Series User Manual Name Description DTMF method Transmission modes of DTMF signal supported by the gateways include RFC 2833 Audio and SIP INFO The default value is RFC 2833 e RFC 2833 separate DTMF signal from sessions and transmit it to the platform through RTP data package in the format of RFC2833 e Audio DTMF signal is transmitted to the platform with sessions e SIP INFO separate DTMF signal from sessions and transmit it to the platform in the form of SIP INFO messages 2833 payload type Used with RFC 2833 in the DTMF transmission modes The default value of 2833 payload type is 101 The effective range available 96 127 This parameter should match the setting of far end device eg platform DTMF on time This parameter sets the on time in ms of DTMF signal sent from FXO port The default value is 100 ms The duration time range is 80 150 ms DTMF off time This parameter sets the off time ms of DTMF signal sent from FXO port The default value is 100 ms The interval time range is 80 150 ms DTMF detection Minimum duration time of effective DTMF signal Its effective range is 32 96 ms The default threshold value is 48 ms The greater the value is set the more stringent the detection is DTMF detection Increase the value can prevent false detection of DTMF sign
72. ll calls from IP of which the calling numbers start with 1 3 4 and 5 ROUTE FXS Route a call to FXS ports Example 1 IP 800 0 3 ROUTE FXS1 2 Select a port in sequential order Note 800 0 3 denotes to the UDP ports ranging from 8000 to 8003 Example 2 IP 800 0 3 ROUTE FXS1 Point this call to FXS port 1 Example 3 IP 800 0 3 ROUTE FXS 1 2 R Select a port in round robin order Example 4 IP 800 0 3 ROUTE FXS 1 2 G Select all idle ports and provide ringing ROUTE FXO Route a call to FXO port Example 1 IP x ROUTE FXO 1 2 Select a port in sequential order Example 2 IP 800 0 1 ROUTE FXO 1 2 R Select a port in round robin order ROUTE IP Route a call to the SIP proxy server Example FXS 021 ROUTE IP 228 167 22 34 5060 228 167 22 34 5060 is the IP address of the platform 2 4 3 Application Examples of Routing Table Some typical functions that can be realized by the routing table are provided in this section Take New Rock Technologies Inc 18 MX Voice Fax Gateway Series User Manual MX8 4S 4 gateway as an example 1 One Phone with Two Numbers 2 Hunt Group 3 Outbound Call Barring 4 FXO Port Hunting for Outbound Call One Phone with Double Numbers A hand set connected to the HX4 can be configured with two numbers through One Phone with Double Numbers For example port FXS1 is set with PSTN number 61202701 and extension number 1001 for internal calling Routing Setting FXS 1001 ROUT
73. lts or no response to the call request Default selected e Before ringing e After ringing Set the timeout of calling DTMF on FXO port for inbound calls ranging from 10 60 seconds with default of 24 seconds Set the delay time of outbound connection ranging from 10 60 seconds with default of 12 seconds Also see Delay sending 2000K on page Phone Line gt Line Used for binding an FXO port with an FXS port For inbound calls to an FXO port 1f the associated FXS port 1s busy the gateway will hang up after off hook according to the time set by the parameter so as to refuse the upcoming call The duration of the off hook is 500 5000 milliseconds with a default of 600 milliseconds Protection period following hang up of FXO port During this period gateway ignores any voltage variation of line Value range is 100 5000 milliseconds the default is 400 in milliseconds Choose whether to activate the detection of reverse polarity signal of FXO port Note the detection will work only when the trunk supports polarity reversal e DISPLAY includes the incoming call number detected at the FXO port in the Display field and sends it to the peer end The From field carries the phone number associated with the FXO port e FROM includes the incoming call number detected by FXO in the From field and sends it to the peer end No Display information is carried Gateways will regard the busy tone signal with the repeat times specified here as a ha
74. m Signaling port l Notification interval 900 5 A E r EMO 7000005 SNMP TROG9 e g 192 168 2 99 Submit Table 2 18 Parameters of system advanced configuration Title NAT traversal Refresh period SDP Address Auto provision New Rock Technologies Inc Explanation Gateways support several mechanisms for NAT traversal Usually static NAT is used when a fixed public IP address is available It s necessary to perform port mapping or DMZ function on router when choosing dynamic or static NAT The refresh time must be filled in here when choosing dynamic NAT or STUN traversal Refresh time interval shall be determined by giving consideration to the NAT refresh time of the LAN router where the gateway is located Gateway s NAT holding function and STUN function will carry out periodic operation according to this parameter With seconds as its unit default value of 60 seconds This parameter determines the IP address used in transmitted SDP e NAT IP Address apply NAT address into the transmitted SDP e Local IP Address apply the gateway s IP address into the transmitted SDP Note The parameter should come into effect only on condition that gateway successfully obtained NAT address Use auto provision function 26 MX Voice Fax Gateway Series User Manual Title Explanation Protocol SNMP use the SNMP network management TR069 use the TR069 network management Figure 2 19 Auto provisioning configu
75. m Startup A A A TON System Status CallMessage System Startup 02 15 14 55 19 749018 config_group_read using tmp web cfg_group ini 19 882090 config c 3600 Category SYSTEM 19 884007 config c 3744 INFO parameter RTP_PORT_MIN set with 10010 19 885157 config c 3744 INFO parameter RTP_PORT_MAX set with 10030 19 886361 config c 3744 INFO parameter DEFAULT CODEC set with G729A 20 19 887321 config c 3744 INFO parameter ECHO CANCEL LEN set with 16 19 888285 config c 3744 INFO parameter CRITICAL_DIGIT_TO set with 3 19 889419 config c 3744 INFO parameter DTMF METHOD set with 2833 19 890247 config c 3600 Category PASSWORD 119 891165 config c 3688 WARNING no value for this param WEB PASSWORD 19 892245 config c 3746 INFO parameter WEB OPER PASSWORD set with 19 892996 config c 3600 Category DIGITMAP 19 896246 config c 3744 INFO parameter DEFAULT DIGIT MAP set with 01 3 5 8 XXXXXxxxx O10xxxxxxxx 02xxxxxxxxx O 3 9 xxxxxxxxxx 120 11 0 2 9 111xx 123xx 95xxx 100xx 113 5 8 xxxxxxxxx 2 3 5 7 xxxxxxx 8 1 9 xxxxxx 80 1 9 xxxxx 800xxxxxxx 4 1 9 xxxxxx 40 1 9 xxxxx 400xxxxxxx booooooooo T x s xx xx 3 02 15 14 55 19 897036 config c 3600 Category OPTIONAL 02 15 14 55 19 900521 config c 3744 INFO parameter EMS DEVICE SUMMARY set with Device 1 0 baseline ini 1 VoiceService 1 0 1 voiceservice ini 1 agprofile ini 1 19 902739 c
76. ng number is chosen the number 2551111 will be sent to 3224422 as calling party number Do not validate Via Set whether to ignore Via field By default Via is ignored Register upon invite Set whether to activate registration when SIP message of INVITE is failed or time expired and timeout by default re registration is not selected Selecting the Use the receiving port of proxy or use the sending port of proxy receiving port for response 2 6 6 Characteristics of Subscriber line After login click the label of Advanced gt Line to open this interface Figure 2 26 Subscriber line characteristics configuration interface LE o A A E E System Security White list Media stream SIP Line Trunk RADIUS Encryption Greeting Tones Feature codes Logout Max hookflash 800 ms rang 80 1400 default 800 Hook debouncing 50 ms rang 10 1000 default 50 Ch z Ring frequency 25 Hz rang 15 50 default 20 Ring voltage Click to modify 60 s rang 15 180 default 60 Also see Disconnect supervision in page Line Feature Outpulsing delay 0 ms rang 0 20000 0 Outpulsing disable Polarity reversal Outgoing Bi direction Polarity reversal delay 5 s rang 0 30 default 3 FSK v SDMF v After ringing Y With parity v User Ring 1 User Ring 2 C D O tu oO m art m a g M 3 in m New Rock Technologies Inc 33 MX Voice Fax Gateway S
77. ng up signal Default is 2 effective range is 2 5 cycle Set duration of busy tone signal the default is 350 in milliseconds Set the interval time of busy tone the default is 350 in milliseconds Default is 23 dB effective range is 15 29 dB 36 MX Voice Fax Gateway Series User Manual 2 6 8 Radius Call Logs After login click the label of Advanced gt RADIUS to open this interface Figure 2 28 Configuration interface of Radius call logs A A A A pa M System Security White list Media stream SIP Line Trunk RADIUS Encryption Greeting Tones Feature codes Logout Ke The key should be configured the same for both client and Y server side Ke The key should be configured the same for both client and server side CDR type Inbound Outbound Answered Unanswered Submit Table 2 27 Configuration parameter of Radius call logs Title Explanation Primary server Set IP address and port number of preferred Radius server Note if the port number is not configured yet please use Radius default port number of 1813 Key Set the share key to be used for encrypted communications between Radius client and server Note The share key should be configured the same for both client and server side Secondary server Set the IP address and port number of standby Radius server When the fault appears in communications between gateway and preferred Radius server the gateway will a
78. nsider that the subscriber has given up the call and prompt to hang up in busy tone Unit second Default value 12 seconds Inter digit timer If a subscriber hasn t dialed the next number key from the time of dialing the last number key to the set time by this parameter the gateways will consider that the subscriber has ended dial up and call out the dialed number Unit second Default value 12 seconds Critical digit timer This parameter is used with the x T rule set in dialing rules For example there is 021 T in the dialing rules table When a subscriber has dialed 021 and hasn t dialed the next number within a set time by this parameter eg 5 seconds the gateways will consider that the subscriber has ended dial up and call out the dialed number 021 Input integers not decimal fractions Unit second Default value 5 seconds Codec Codecs supported by MX include G729A 20 G723 30 PCMU 20 PCMA 20 1LBC 30 and GSM 20 This parameter must be set due to no default value Several encoding methods can be configured in this item at the same time separated with in the middle the gateways will negotiate with the platform in the order from front to back when configuring the codec methods Hook flash handle The gateways provide the following processing modes after detecting hook flash from subscriber terminals e Internal the hook flash event will be handled internally e Server RFC 2833 transmitting the hook flash to p
79. od s range 1 86400 ms range 1000 32000 f the response to OPTIONS is timed out switch to the standby server REGISTER setting REGISTER UE Ena 17000 male a Ll the response to REGISTER is timed out switch to the standby server Submit SLTIONS request timeou 3 4 4 Configure REGISTER Settings In the active balancing mode the following time need to be configured e REGISTER request timeout the period from the sending of the first REGISTER with no response by the previous SIP server to the sending of REGISTER to the next SIP server Figure 3 10 Page to configure REGISTER settings High availability Load balancing Y SIP server cluster standby SIP proxy sever setting Ad O O E E T T 192 168 1101 5060 e g 168 33 134 53 5060 192 168 1 102 5060 e g 168 33 134 53 5060 OPTIONS setting OPTIONS request period s range 1 86400 ms range 1000 32000 f the response to OPTIONS is timed out switch to the standby server REGISTER setting nsirange 2000 22000 1f th e to REGI bis REGISTER request timeout ICE 2000 32000 if the response to REGISTER i ji Switch to the standby server 1 EA Active server list OPTIONS request timeout Submit 3 4 5 Active Server List All the SIP servers on which the gateway or endpoints are registered on will be listed in active server list New Rock Technologies Inc 2
80. of its own timeout setting the time interval set in non dial timeout of configuration system parameters when subscribers hasn t dialed up in time after offhook Select whether to activate the digit map configured by local gateway and default value is not selected Set whether the gateways report offhook events to replace 401 messages in NTFY or report onhook events to replace 402 messages in NTFY when responding to messages sent by the proxy server Default not selected e Selected the gateways will use NTFY message to replace 401 and 402 messages Select if a package name is included when the gateways reply to the default package and default not selected Select if the gateways actively cancel connection disconnect when subscribers hook on and default not selected 2 3 7 FolP After login click the label of Basic gt FoIP to open this interface New Rock Technologies Inc 11 MX Voice Fax Gateway Series User Manual Figure 2 8 Fax configuration interface Status Network System SIP MGCP FoIP Logout Transparent and T 30 Transparent Wo ce 7 38 T 38 with CED T 38 with CNG T 30 and T 38 Jitter buffer 250 ms range 0 1000 default 250 Speed 9600 bps J 4800 bps Receiving port for FoIP ECM J Open a new port Use original voice port LJ Error Correction Mode 6 dB Receive gain Transmit gain lo v dB Packet size 30 v ms Redundancy 4 v dB
81. omputer MX60 and MX120 Gateways use a static IP address by default Table 2 1 Default IP Address of Gateway DHCP Used in Network Users can dial to obtain the current gateway IP address and version information of firmware using the telephone connected to the subscriber line FXS ports after the equipment is powered on If the gateways are only configured with FXO ports for analog trunks without FXS ports for subscriber lines e g MX8 4FXO users can dial into the gateway by connecting a PBX extension line or PSTN POTS line to a FXO port and press to obtain the current gateway IP address and version information of firmware after receiving the second dial tone Note The access mode of the FXO port must be configured as second stage dialing mode For details see section 2 5 4 Trunk Line Features Fixed IP Address Used If the DHCP service on the network is not available or the gateway is directly connected with a computer the gateways will use the factory default IP address A user could fail to log in with the default IP address if the IP address of user s computer and the default gateway IP address are not at the same network segment It is recommended that the IP address of users computer is changed to be identical with the same network segment of the gateway For example if the gateway IP address is 192 168 2 218 it 1s recommended to set the computer s IP address to any address at the network segment of 192 168 2 X XX
82. on When the SIP port of the device is 5060 you are advised to modify it Figure 2 2 Status Interface EL NE onim tdt Status Network System SIP MGCP FoIP Logout Device information Signaling port 5060 Current SIP port is 5060 please modify to avoid SIP DOS attack Host name MX8 VoIP AG MAC address 00 0E A9 31 7D DE Model MX8 8S IP address 192 168 10 100 2 3 2 Network After login click Basic Network tab to open the configuration interface New Rock Technologies Inc 3 MX Voice Fax Gateway Series User Manual Figure 2 3 Network Configuration Interface BLE oem ou m ue tmn Rye deme ue m a tts Status Network System SIP MGCP FoIP Logout MX8 VoIP AG Contain letter number and but must start with letter MAC address 00 0E A9 31 7D DE IP address assignment DHCP IP address 192 168 10 100 Netmask 255 255 255 0 Gateway IP address 192 168 10 1 Primary server 10 129 1 1 e g 202 96 209 6 Secondary server 192 168 2 1 e g 202 96 209 133 SNTP Primary server 198 60 22 240 Secondary server 133 100 9 2 Time zone GMT 08 00 Beijing v Submit Table 2 3 Network Configuration Parameters Name Description Host name This is the equipment name of the gateway The default values of MX8 MX60 and MX120 are MX8 VoIP AG MX60 VoIP AG and MX120 VoIP AG respectively Users can set a different name for each gateway when multiple gateways are on
83. onfig c 3744 INFO 19 905100 config c 3744 INFO 19 906462 config c 3744 INFO 19 908071 config c 3744 INFO 19 910228 config c 3744 INFO 19 911665 config c 3744 INFO 19 913513 config c 3744 INFO parameter FXO_RELAY_TO set with 600 02 15 14 55 02 15 14 55 19 914793 config c 3744 2 8 4 Manage Log parameter LINE_AUTO_RECOVER_MASK set with 0x003B parameter FXO_RING_PROFILE set with 0xF4CA3285 parameter FXO_DISC_TO set with 500 parameter FXO_CID_GAIN set with 10 parameter FXO_OHT_PARAM set with 1 parameter FXO_RELAY_DT set with 1 parameter DROP_RTCP set with yes After login click Logs gt Manage Log to open this interface Log files can be downloaded through this interface New Rock Technologies Inc 46 MX Voice Fax Gateway Series User Manual Figure 2 40 Interface of Manage Log A A E E PE System Status CallMessage System Startup Manage Log Download log Log level Download Advanced Syslog System log server e g 137 61 68 25 Local log port 514 Log server e g 137 61 68 26 Submit Table 2 34 Configuration parameters of Manage Log Title Explanation Log level Select the log file level of gateway default is 4 The higher the level the more details the log file will be Note Log level should be set to 4 or lower when gateway is used in normal operation avoiding reducing the system performance System log server Set the IP address of the sy
84. ort SNMPv2 based and TR069 TR104 TR106 based centralized management scheme Maintenance tasks such as modifying configuration upgrading software collecting statistical data downloading logs and fault alarms can be performed New Rock Technologies Inc 1 MX Voice Fax Gateway Series User Manual 1 2 Functions and Features Connect analog telephone PBX facsimile machine and POS machine to the IP core network or PSTN Work with service platform to provide various telephone supplementary services Support protocols SIP MGCP Flexible configuration of Phone Line interfaces Support G 711 G 729 G 723 1 GSM iLBC Support echo cancellation Up to 500 routing rules can be stored in gateways Intercom Support digitmap Support call progress tones for various countries and regions Support Line second stage dialing or voice prompt Support PSTN failover through FXO ports Security strategy IP filter encryption Support routing table Support T 30 T 38 fax mode Support polarity inverse detection and busy tone detection Support three way calling Compatible with unified communication solutions such as CallManager OCS and Asterisk Support SNMPv2 and TR069 TR104 TR106 Support Web GUl based management Telnet automatic software upgrades and configuration downloading Support high availability implementing a cloud of SIP servers working in primary standby or load balancing mode Support auto provision
85. ound calls The delay time from a call being answered to the transmission of reverse polarity signal The default value is 3 in seconds Effective range of setting is 0 30 seconds Select transmission mode of Caller ID signal from the FXS port to the phone e FSK or DTMF e SDMF or MDMF e sending Caller ID data before or after ringing e sending Caller ID data with or without parity Choose whether to play the background music while call waiting and the default is not to play Choose whether to activate hunt group feature for call waiting Default not selected 34 MX Voice Fax Gateway Series User Manual Title Explanation Message waiting Choose the lighting method of message waiting indicator of voice mail here None Polarity indication MWI reversed FSK high voltage lighting not supported by MX8 Message waiting indicator refers to the special LED on a phone working with voice mail function When user receives a voice message The gateway will light this lamp upon receiving the notice from platform the light goes off when there s no unheard mail It s essential to understand whether the phone supports the indicators and lighting method when selecting the lighting method Voltage This parameter is used together with high voltage lighting for MWI The range is from 60 V to 100 V The default value is 80 V Distinctive Alert Ringing Alert Info 1 To match with User Ring 1 Four patterns of user ring are offered When
86. r Dialing 6 ooo epe eI ep SER Eve Ge en Gl A eee 13 Figure 2 10 Configuration Interface ior Routine Tal tao 15 Figure 2 1 ConBpuration Interface Jot IP Tale AA AAA AA AA AAA AAA 20 Figure 2 12 Configuration Interface for FXS phone number 0 0 cc ccc cccceeeeeseseesesesseeeeseseseseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees 21 Figure 2 13 Configuration Interface for FXO phone numbe 0 0 0 0 eee s cceeeseeeeseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees 21 Figure 2 14 Configuration Interface for Subscriber Line Features cece cc cccceceeeeseeeeseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees 22 Figure 2 15 Configuration Interface Tor Trunk Line Features siii did 23 Figure 2 16 Feature batch configuration IDEA iii dit a da a A ennai 25 Ersute 2 17 Trunk Batebcontieuratton Mid 23 Figure 2 18 Interface of system advanced COnfiQuraitOn ceeccececeseeseseeeeeesssssessesessssessssseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees 26 Fistre 2 19 Auto provisions cont cura on IMA tira geri REUEN denne 2 Foue 22205 VIE COMO UAC OM Interact did dt 28 Figure 2 2 I7 TISOO9 conre ura ton tera A AD AA 28 Louie 2 27 Security confieuratton EePIdCG ada AAA AA A AAA A A 29 Fisure2 23 White ist ceonh guration Interlude 30 Figure 2 24 Media stream conl guration MAC A A AA A annie ats 30 Figure 2 25 SIP related contiguravion Inter dce seein n a Ga ae ee a ee dec du pud vi des S 32 Figur
87. r way before applying this function please see Phone for how to assign the feature to the phone User operation upon dialing the function key 74 dial the two digit speed dial followed by the expanded number terminated with The prefix number for applying abbreviated dialing with default of The said prefix should be added ahead of abbreviated dialing numbers when using abbreviated dialing User operation off hook dial the prefix number of abbreviated dialing and dial abbreviated dialing number 20 The function key for cancelling the call waiting feature for next call with default of 64 Dialing this function key will temporarily shield the user from a call waiting distraction for next call avoiding the possible intervention Note The function key works only for single cancel if to cancel the call waiting completely please refer to the instructions on relevant configuration of subscriber line Function key of blind call transfer with default of 38 User operation during the call tap the phone hook switch or press R button dial 38 dial the called number and then hang up The function key for hearing the color ring with default of 88 User operation off hook press 88 input color ring number AI 42 MX Voice Fax Gateway Series User Manual 2 7 Status 2 7 1 Call Status After login click Status gt Call Status to open this interface Figure 2 33 Interface of call status Call Stat
88. ration interface A oHm A E TES ory System Security White list Media stream SIP Line RADIUS Encryption Greeting Tones Feature codes Logout NAT traversal Dynamic NAT z Refresh period 15 more than 14 s default 60 SDP address NAT IP address Local IP address T e g protocol 211 168 5 153 protocol http tftp ftp e grades Update mode Power on Periodical Y 3600 s range 5 86400 The terminal performs the auto provisioning Interval Minutes process at regular intervals Table 2 19 Parameters for auto provisioning configuration Parameter Description DHCP ACS Auto Provisioning Server address is obtained by using OPTION66 of the DHCP Server Manually configure the ACS address which can be the TFTP FTP or HTTP server e tftp ACS address e ftp ACS address e http ACS address Firmware upgrade Supports firmware download and update using ACS Update mode The following modes are available e Power on the gateway detects whether there are configurations and firmware to be updated when the device is powered on e Power on Periodical when the device is powered on the gateway first checks whether there are configurations and firmware to be updated and then periodically performs checking based on the set times Interval minutes When Power on Periodical is set this parameter specifies the interval for periodic automatic upgrades New Rock Technologies Inc
89. ration page Status Network Syster SIP YMGCP FolP Logout Signaling port range 1 9999 default 5060 Auto SIP port selection E Off 1 10 Local SIP port will auto select based 5060 increasing the value 192168 100 Proxy server 192 168 1 100 e g 168 33 134 50 5060 or www sip com 5060 User agent domain name e g www gatewayslp com Registration mode Per line Y Fer line xx Password You may obtain it from service provider Registration period 600 s range 15 86400 default 600 High availability Load OPTIONS request period load A s range 1 86400 Submit 3 4 2 Set SIP Servers Refer to 3 3 2 Set SIP Servers 3 4 3 Configure OPTIONS Settings In the active balancing mode the following timers need to be configured e OPTIONS request period the interval between receiving the response 200 from the SIP server to the previous OPTIONS and sending the next OPTIONS e OPTIONS request timeout the period since the sending of the last OPTIONS with no response by the SIP server New Rock Technologies Inc 1 MX Voice Fax Gateway Series High Availability Configuration Guide Figure 3 9 Page to configure OPTIONS settings High availability MEE Load balancing SIP server cluster standby SIP proxy sever setting QAdd gt O 192 168 1101 5060 e g 168 33 134 53 5060 192 168 1 102 5060 e g 168 33 134 53 5060 A OPTIONS request peri
90. rd Topology is shown as bellow Figure 3 1 Server cluster 2791 Gateway SIP Server DNS Server New Rock Technologies Inc 2 MX Voice Fax Gateway Series High Availability Configuration Guide 3 2 Configuring Primary Standby Mode Click Basic gt SIP Figure 3 2 Primary Standby configuration page Status Network Syste sip GCP FoIP Logout Off v 1 10 Local SIP port will auto select based 5060 increasing the value 192 168 1 100 e g 168 33 134 50 5060 or www sip com 5060 xcd uum E Mete pieyundyt O O Submit Here are the steps to configure the Primary Standby mode Step4 Choose the mode as Primary Standby Step5 Fill primary SIP server IP address or domain name in Registrar server Step6 Fill primary SIP server IP address in Backup SIP proxy server If a domain name is filled in step 2 skip this step Step7 Select Primary server heartbeat detection and configure the OPTIONS request period Step8 Click Submit Step9 Click Basic gt Network check Enable in DNS fill IP address in Primary server and then submit This step 1s required 1f a domain name is filled in step 2 3 3 Configuring Active Standby Mode 3 3 1 Enable Active Standby Feature Enter the SIP trunk setting page and click Basic gt SIP gt Primary Standby configuration and choose Active standby then submit New Rock Technologies Inc 1 MX Voice Fax Gateway Series High Availability Conf
91. returned by registration server e LAN IP address keep original content of Contact when register The default is Domain name e Domain name complete domain name used for registration for example 8801 registrar newrock com e Sub domain name only use the common part of the name of domain for example 8801 Onewrock com Choose whether to use NAT IP address or LAN IP address for Via header field value the default is NAT IP address Choose whether to apply Sub domain name or Outbound proxy to To header field the default is Sub domain name 32 MX Voice Fax Gateway Series User Manual Title Explanation Address in Call ID Choose whether to fill Call ID field with Host name or Local IP address the default is Local IP field address Called party number Choose whether the gateway acquires the called number from Request Line header field or To header field The default is From Request line field Calling party Under call forwarding the calling party number sent can be chosen from Originating number or number in call Forwarding number being set for sending the default is Forwarding number transfer For example the subscriber line 2551111 on the gateway activates call forwarding feature and set the destination to 3224422 When caller with 13055553333 calls 2551111 the call will be forwarded to 3224422 e if Originating number is chosen the number 13055553333 will be sent to 3224422 as calling party number e if Forwardi
92. ription Server Specify the URL of the ACS New Rock Technologies Inc 28 MX Voice Fax Gateway Series User Manual Parameter Description Username Specify the user name to be used by the device to authenticate with the ACS Password Specify the password to be used by the device to authenticate with the file server Provisioning code Information of the device vendor which may be used to indicate the primary service provider and other provisioning information to the ACS It can be numbers or English letters Model name A brief description of the interface type or name It is a string of characters Periodic inform A switch used to specify whether to periodically report to the ACS enable Periodic inform The interval for reporting to the ACS interval Connection request The address used for the ACS to connect back to the device URL Connection request The account used for the ACS to connect back to the device for example admin username Connection request The password used for the network management server to connect back to the device password 2 6 2 Security Configuration After login choose Advanced gt Security to open the security configuration interface Figure 2 22 Security configuration interface Bees a um Avance e s A AMON erly System Security White list Media stream SIP Line Trunk RADIUS Encryption Greeting Tones Feature codes Logout Password sensitive Password 6 20 char
93. roxy server when there is no matched rule for the call The format of number transformation is Source Number Replacement Method For example FXS 021 REMOVE 3 means remove the prefix 021 of the called number for calls from the FXS port where FXS is source 021 is number and REMOVE 3 indicates the method of number transformation The format of routing rules is Source Number ROUTE Routing Destination For example IP 800 0 1 ROUTE FXO 1 2 means route calls from IP with called number between 8000 8001 to FXO port in a sequential selecting order of 1 2 Namely FXO Port 2 is selected when FXO Port 1 is busy and so on Detailed definitions of source and number number transformation methods and routing destination are shown below Table 2 11 Routing Table Format Name Description Source There are three types of source IP FXS Phone fax and FXO Line Among them IP source can be any IP address and is denoted by IP IP xxx xxx xxx xxx is used to denote a specific IP address IP xxx xxx xxx xxx port is used to denote specific IP address with port number FXS and FXO ports can be any port represented with FXS or FXQ special lines can be represented with FXS or FXO plus the port number e g FXS1 FXO2 or FXS 1 2 etc Number It could be a calling party number with the form of CPN number such as CPN6034340633 or a called party number with the form of number The number may be denoted with digit DOME x etc and u
94. se calling number starts with 2 at a FXS port 1s barred to call out FXO Port Hunting for Outbound Calls Routing Setting FXS x ROUTE FXO 1 2 Description Send all calls from FXS ports to FXO ports in sequential order 2 4 4 IP Table After login click Routing IP Table tab to open the configuration interface Figure 2 11 Configuration Interface for IP Table AN AM coo EL PEE E NR E E Digit Map Routing Table IP Table Note j 1 The table is used to filter the source IP address that receives signaling Cl Selected all 2 Those messages which are from 202 96 209 133 will be processed Submit This table is designed to ensure the safe use of gateways Administrators can add the authorized IP addresses to this table and the gateways will only process the information from authorized IP addresses If the IP table is empty the gateways will not perform IP address based message filtering For example the gateway will only process the messages from 202 96 209 133 after adding 202 96 209 133 to its IP table If the gateway is deployed in a public network you are advised to set IP filtering to prevent call theft 2 5 Line Configuration 2 5 1 FXS Phone Number After login click Line gt FXS phone number tab to open the configuration interface New Rock Technologies Inc 20 MX Voice Fax Gateway Series User Manual Figure 2 12 Configuration Interface for FXS phone number Feature
95. ses the same regular expression as that of dialing rules Here are examples of the form of number e Designate a specific number eg 114 or 61202700 e Designate a number matching a prefix such as 61xxxxxx Note The matching effect of 61xxxxxx is different from that of 61x or 61 Number matching follows the principle of minimum priority matching e Specify a number scope For example 268 0 1 3 9 specifies any 4 digit number starting with 268 and followed by a digit between 0 1or 3 9 Note Number matching follows the principle of minimum matching For example x matches any number with at least one digit xx matches any number with at least two digit 12x matches any number with at least 3 digit starting with 12 New Rock Technologies Inc 16 MX Voice Fax Gateway Series User Manual Table 2 12 Number Transformations Processing Mode Description and Example KEEP Keep number A positive number behind KEEP means to keep several digits in front of the number a negative number means to keep several digits at the end of the number Example FXS 02161202700 KEEP 8 Keep the last 8 digits of the called number 02161202700 for calls from FXS The transformed called number is 61202700 REMOVE Remove number A positive number following REMOVE means to remove the first several digits of the number a negative number means to remove the latter several digits of the number For example FXS 021 REMOVE 3 Remove 021 of the called number beginnin
96. stem log server Local log port The port used to send logs Log server IP address of debugging log server Procedure for downloading the log Step1 Click Download the gateway begins to assemble the logs Step2 After a few seconds the interface of log saving will appear Step3 Click Save and select path to save Step4 The user may review the log from the server s Not en The procedure of downloading log files described hereof is only applicable to release 1 9 x 238 of MX series or updated version of software 2 9 Tools 2 9 1 Change Password After login click Tools to open this interface Only administrator is entitled to change the password of login For changing administrator password it s required to enter new password into New password field and Confirm new password field and then click Submit The password being used by the operator will be displayed as hidden codes which could be changed by the administrator at any time The administrator is allowed to change the operator s password by entering the new password into Operator password password New Rock Technologies Inc 47 MX Voice Fax Gateway Series User Manual Figure 2 41 Interface for password changing A A A A c EBL Logout Change password Administrator password Export data ooo Import data password Upgrade Restore factory settings Operator password Restart Reboot TDM capture Ethereal capture 2 9 2 Export Data
97. t aad Ged 46 29 TOO C M 47 Ped EAS AS SA A A A E teed 47 A II ere 48 A eee Mere On eee ML oer ML ML eee cere 48 DD Mucio c I P 49 29 S Restore Factory TS EMIT NE TR S T 22 2 9 03S OIL AES RES da AAA AAA ia 52 2 9 T System REDO OU estates vies cites etc tue irt mrt a eeu des ete fete uan tete tette atre ete uet citet terat 52 Pus OMNI SCR TDI TREE TL LO LU LT E Ag eed 52 A A RENE ENE EA ENAA 53 Dl Verson TOTO O A SE E ATA AA A ai 54 ELO OU OEP RR ENS 54 3 Appendix High Avatlability Configuracion sd ONE tel Rd tratos 1 SL UC MONA ENO Mes A AA ESA A AAA ALA A TIENS 1 AA O A AA A O A A IA A A A 2 32 COnmeunne Primary standby Mode ri ld lala dd illa 1 xo COM SUIS ACUTE MAA NO i n 1 5 5 I Bnable ACU Ve tandDy Eat ida dd id ota 1 IN lo v E E A II ct nets NI O IN anton deals elo ad IT 2 DOO ete Pato ve ers iino LA AAA AAA AA A A ias 4 3 334 Howto Manually Perform S witChOv ii A AA AAA AA LA AS 5 o4 Conmeurine Load Balancing MA aa a ei ntu tet bro A E EEA 1 5 4 Enable Load Bal amine EC QUE oett tene pee etae eee Eae tpi entia A 1 o A E AR NR 1 314 5 Conrieure OPTIONS SCUNMOS aia A A duse Teu ipee dane du Luo 1 Sd de ontibure REGISTER Setin Eee II A E RA Perder wees etees aust 2 S 9 JXCHVe Server BIS osea
98. ta e GMT 05 00 Karachi e GMT 06 00 Almaty e GMT 07 00 Bangkok e GMT 07 00 Indonesia e GMT 08 00 Beijing e GMT 08 00 Taipei e GMT 08 00 Singapore e GMT 08 00 Malaysia e GMT 09 00 Tokyo e GMT 10 00 Canberra e GMT 10 00 Adelaide e GMT 11 00 Magadan e GMT 12 00 Auckland New Rock Technologies Ine 5 MX Voice Fax Gateway Series User Manual 2 3 3 System Configuration After login click Basic gt System tab to open the configuration interface Figure 2 4 System Configuration Interface o AA A A E a em Status Network System SIP MGCP FoIP Logout First digit timer 12 s range 2 60 default 12 G729A 20 PCMU 20 G723 30 PCMA 20 iLBC 30 G729A 20 G723 30 PCMU 20 PCMA 20 iLBC 30 GSM 20 DTMF method RFC 2833 v 101 range 96 127 default 101 This value should be set as the same as the value in server 100 ms range 80 150 default 100 This is the on time of sending DTMF digit 100 ms range 80 150 default 100 This is the off time of sending DTMF digit 48 ms range 32 96 default 48 This is the dection threshhold for receiving DTMF digit DIME detcion cust 16 me Submit 2833 payload type DTMF on time DTMF off time DTMF detection threshhold Table 2 4 System Configuration Parameters Name Description First digit timer If a subscriber hasn t dialed any number within a specified time by this parameter after offhook the gateways will co
99. the Alert info value of INVITE message matches with this parameter User Ring 1 is activated User Ring 1 Configure user ring 1 E g 1 if the user ring is set 2 500 500 1000 3000 the ringing cadence is 0 5s on 0 5s off 1s on 3s off E g 2 1f the user ring is set 2000 4000 the ringing cadence will be 2s on 4s off Alert Info 2 To match with User Ring 2 User Ring 2 Configure user ring 2 Alert Info 3 To match with User Ring3 User Ring 3 Configure user ring 3 Alert Info 4 To match with User Ring 4 User Ring 4 Configure user ring 4 2 6 7 Characteristics of Trunk Line After login click the label of Advanced gt Trunk to open this interface Figure 2 27 Trunk line characteristics configuraiton interface Pet cares pec RN or aane m m mA mM System Security White list Media stream SIP Line Trunk RADIUS Encryption Greeting Tones Feature codes Logout Caller ID detection mode Inbound first digit timeout s rang 10 60 default 24 Timeout of collecting DTMF on FXO for inbound call s rang 10 60 default 12 Also see Connect signal delay in page Line gt Trunk Off hook for rejection 1000 s rang 500 5000 default 600 m On hook protection time 400 ms rang 100 5000 default 400 Caller number sending mode O DISPLAY FROM Repeat 2 cycle rang 2 5 default 2 Se RR EUER Submit New Rock Technologies Inc 35 MX Voice Fax Gateway Series User Manual
100. the same subnet A host name can be a maximum of 48 characters either letters A Z or a z numbers 0 9 and minus sign It may not include a null or space and it must start with a letter ETHI MAC address Display the MAC address of the gateway IP address Methods for obtaining an IP address SREIEDUNSHE e Fixed static IP address is used e DHCP use the dynamic host configuration protocol DHCP to allocate IP addresses and other network parameters e PPPoE PPPoE service is used User name Enter an authentication user name if PPPoE service is selected and there is no default value Password Enter an authentication password if PPPoE service is selected and there is no default value IP address If Fixed or DHCP is selected for the network type but an address fails to be obtained the gateways will use the IP address filled in here If the gateways obtain an IP address through DHCP the system will display the current IP address automatically obtained from DHCP This parameter must be set due to no default value Netmask The subnet mask is used with an IP address When the gateways uses a static IP address this parameter must be entered when an IP address is automatically obtained through DHCP the system will display the subnet mask automatically obtained by DHCP This parameter must be set due to no default value Gateway IP The IP address of LAN gateway When the gateways obtain an IP address through DHCP the address
101. us Call history on FXS Call history on FXO SIP message count Logout Clear l Refresh Phone No 3 x Phone No s End Registration Other Enc Duration Operation In Out Answered 8000 jNotregitered On hook Ide J o o Fxs2 8001 Notregstered On hook Ide o Oo ot registered On hook Ide J o o otregistered On hook Ide J o 0 N N Not registered Disconnect Idle l o o Not registered Disconnect Ide o o FXO 3 8006 jNotregitered Disconnect Ide o O FXO 4 8007 Notregistered Disconnect Ide Tg Tg Table 2 32 Parameters of call state Title Explanation Line There are six types of line status On hook Off hook Ringing Maintenance Disconnect Parallel line in use Call The call state includes Idle Outpulsing Ring Entering number In progress Ring back Talk Near end hung up Far end hung up and Timeout 2 7 2 Call History on FXS After login click Status gt Call history on FXS to open this interface Figure 2 34 Interface of call on FXS EO O l Submit Clear Refresh Answered Short call Failure Duration Callattempt Answered Short call Failure Duration Jle ee o 900 o o o o omo Ring EA Ps1 o o o o oow0w00 o o o o oo w0 00 EM o o o 9990 o 9 o o 00 00 00
102. utomatically activate standby Radius server Note In case of no configuration of port number use default port number of 1813 Key The share key for communications between Radius client and standby Radius server Note The key should be configured the same for both client and server side Retransmit timer Set the amount of overtime on response after transmission of Radius message the default is 3 seconds The retransmission will be performed If no response is given after the timeout Retransmit times Set the times of retransmission of Radius message when no response is received default is 3 times CDR type e Inbound set whether to send RADIUS charge message for inbound calls e Outbound set whether to send RADIUS charge message for outbound calls e Answered set whether to send RADIUS charge message when calls are connected e Unanswered set whether to send RADIUS charge message for unanswered calls 2 6 9 Encryption After login click the label of Advanced gt Encryption to open this interface New Rock Technologies Inc 37 MX Voice Fax Gateway Series User Manual Figure 2 29 Encryption configuration interface A A A o A nmt System Security White list Media stream SIP Line Trunk RADIUS Encryption Greeting Tones Feature codes Logout RTP encrypt 0 No encryption Y You may obtain it from service provider o ELE EE Encryption method 7 UDP encrypted V You may obtain it from service pro
103. vider Encryption key You may obtain it from service provider Session border proxy e g 201 30 170 38 1020 or sbc com 1020 Signaling port 4660 rang 1 65535 default 4660 Submit Table 2 28 Encryption configuration parameters Title Explanation T 38 encrypt Choose whether to encrypt T38 data By default this is not selected RTP encrypt Choose whether to encrypt RTP voice pack the default is 0 e 0 no encryption e 1 entire message e 2 header only e 3 the data body only Signal encrypt Choose whether to encrypt signaling By default this is not selected Encryption method Set the gateway encryption method default is 7 The optional parameters as below e 2 TCP not encrypted e 3 TCP encrypted e 6 UDP not encrypted e 7 UDP not encrypted e 8 Using keyword e 10 RC4 e 13 Encrypt13 e 14 Encryptl4 e 16 Word reverse 263 e 17 Word exchange 263 e 18 Byte reverse 263 e 19 Byte exchange 263 e 20 VOS Encryption key You may obtain it from service provider Session Border Proxy Server Set the IP address and port number of session border proxy server The character of must be used between IP address and port number Server address could be set into IP address or domain name When domain name is used DNS service must be activated as shown in the page of Network and DNS server must be configured Example 201 30 170 38 1020 or sbc com 1020 Signaling port Signal
104. way Series User Manual Table 2 30 Call progress tone configuration parameters Title Country Region Dial 2nd dial Message waiting Explanation There are progress tone plans for several countries and regions which are pre programmed in gateways Users may also specify the tone plan according to the national standard Gateways provide tone plans for the following countries and regions China the United States France Italy Germany Mexico Chile Russia Japan South Korea Hong Kong Taiwan India Sudan Iran Algeria Pakistan Philippines Kazakhstan Singapore Israel Malaysia Indonesia United Arab Emirates Zimbabwe Australia Prompt tone of off hook dial tone Used for the second stage dial tone Used for prompt of voice mail or when the subscriber line is set with Don t Disturb Service and Call Transfer Busy Used for busy line prompt Used for busy line prompts Congestion Used for notification of call set up failure due to resource limit Ring back The tone sent to caller when ringing is on Disconnect Used for reminding the subscriber of off hook and no dialup status of the phone Call waiting Used for notification in call waiting Confirmation Used for confirming function keys being entered Here are examples that illustrate the various call progress tones 350 440 dial tone Indicates the dual frequency tone consisting of 350 and 440 Hz 480 620 500 0 500 busy Indicates the dual frequenc
105. way Series User Manual equipped as analog subscriber line type flashing LED indicates that the corresponding line is equipped as analog foreigh exchange line type off LED indicates that the corresponding line is not equpped or not ready for use System operation status indication this is the mode for displaying information on system operation of equipment in specific conditions Usually this mode is entered when some prompts are required to give operator during equipment startup diagnosis or operation In this mode LED flashes to display numbers letters or other patterns in matrix Please refer toTable 1 18 Figure 1 9 MX120 Back Panel AC a Y H Pa MN f D N a ur N 3 6 Figure 1 10 MX120 Back Panel DC 9 a UA Ses N E Y 2 PERS NE A E M pate Z N Z d S PERS A SE f New Rock Technologies Inc 10 MX Voice Fax Gateway Series User Manual Table 1 16 MX120 Back Panel Description Indicator see O for description USB interface reserved for future use Configuration interface CON used for local management and debugging Ground Pole Two Ethernet interfaces ETH1 and ETH2 only ETHI has been set when the equipment is delivered from factory default IP address 192 168 2 240 Cooling fan AC power socket 100 240 VAC
106. y SIP server if there is no response to the REGISTER or INVITE Ss When high availability feature is enabled the PSTN failover feature in Advanced Trunk should be disabled as shown in Figure 2 6 Figure 3 7 Page to disable PSTN failover M unu D System Security White list Media stream SIP Line Trunk RADIUS Encryption Tones Feature codes Logout aint IN TEA Voice prompt Hand up Busylingbandle O pC tI failover L 2 Caller 1D detection mode AfterringingA VY 10 60 s default 24 Ti t of collecting DTMF FXO f Inbound first digit timeout a s 5 CU ng i e inbound call 10 60 s default 12 Also see Connect signal delay in Answer dn s ba 1g T page Line Trunk Off hook for rejection 1000 500 5000 ms default 600 On hook protection time 400 100 5000 ms default 400 Polarity detection 3 3 4 How to Manually Perform Switchover On the Wen GUI of the gateway the Switchover button provides a means to manually switchover the call traffic from the current SIP server to the next available SIP server New Rock Technologies Inc 5 MX Voice Fax Gateway Series High Availability Configuration Guide 3 4 Configuring Load Balancing Mode 3 4 1 Enable Load Balancing Feature Enter the SIP trunk setting page and click Basic gt SIP gt Primary Standby configuration and choose Load balancing then submit Figure 3 8 Load balancing configu
107. y tone consisting of 480 and 620 Hz repeated playing with 500 milliseconds on and 500 milliseconds off Note 0 500 indicates 500 milliseconds mute 440 300 0 10000 440 300 0 1 0000 Indicates 440 Hz single frequency tone repeated twice in terms of 300 milliseconds on and 10 seconds off 950 333 1400 333 1800 333 0 1000 Indicates repeated playing 333 milliseconds of 950 Hz 333 milliseconds of 1400 Hz 333 milliseconds of 1800 Hz and mute of 1 second 2 6 12 Feature Codes The feature codes consist of system feature codes and service feature codes The system feature codes are used for acquiring gateway information and the latter is used for users to activate and inactivate supplementary services After login click the label of Advanced gt Feature codes to open this interface The following are the examples of the dialing rule for the feature codes Using xx dial and 2 digits number to activate a service Using xx dial and 2 digits number to cancel a service New Rock Technologies Inc 40 MX Voice Fax Gateway Series User Manual This is illustrated with the following defaults for various parameters which may be modified according to requirements Figure 2 32 Feature codes configuration interface o A A arcos C E System Security White list Media stream SIP Line Trunk RADIUS Encryption Greeting Tones Feature codes Logout Pte CPU 0 rane sO cian BT e e E E

MX User Manual V333

Contents

Download Pdf Manuals

Related Search

Related Contents