User's Manual - CD
Contents
1. Setup gt press 6 ReadErrorSkip ENT gt 11 7 Eject on Start Skip Read Error gt move A v to select ON ON OFF You can choose whether or not to eject the disc when powering up the system Setup Soas 7 Eject On Start gt move A v to select 7 Eject On Start ENT gt Eject All Eject All No Eject aa Eject Target Eject Source 11 8 Boot Password You can setup the boot password to prevent anyone from using duplicating system Setup gt press Boot Password gt move A iy to select 8 Boot Password ENT gt Disable Disable Enable If you select Disable you will go back to Setup 5 Boot Password If you select Enable you will need to choose a password Boot Password gt se A Cc Y to select the character you want Press ENT to go to the next position There are a total of 6 positions for the password To enable the password set all 6 positions An empty space is acceptable Press ESC to cancel the process The duplicating system will then ask for password when the unit is restarted 11 9 Setup Password You can enable the setup password to prevent anyone from changing the setting of the duplicating system Setup Password gt move A v to select Disable Disable Enable Setup gt press 8 Setup Password ENT gt 16 If you select Disable you will go back to2. Copy amp Compare79 45 2Analyzing analyze Disc source disc copying 3 10 08 00 gt Start Copy 79 45 Copying finished and Compare 79 45 3 100 finished and start Comparison gt 45 35 45 Eject discs e The Compare Disc function serves as a bit by bit Comparison between Master Reading Source and the copied discs inside the writer trays This operation ensures that all of the copies are completely identical to the Master Reading Source 5 VERIFY This function will check the master disc and the copied discs readability to ensure that all of the copies are readable a Place master source disc and all copied discs into the duplicator b Press ENT The duplicator will automatically start loading the disc analyze the source disc and begin verification c When verification is complete the duplicator writer trays will automatically eject 5 Verify dise detected gt Press ENT to load discs gt Verify 79 45 gt Start Verify 79 45 gt 100 Finished Analyze Disc verification 45 35 45 and eject discs Verify 79 45 Loading Disc 3 Analyzing source disc gt 6 COMPARE DISC Use this function to make a bit by bit Comparison between Master Reading Source and the copied discs inside the writer tray This operation is used to ensure all of the copies have the same information as the Master Reading Source a Put master source disc and all copied discs into the duplicator b Press
3. confirm gt delete gt DELETE Image A003 DVD 4372M 19 to re select another image as gt Select the image file you would like to delete gt A003 DVD 4372M and execute DELETE Complete 12 7 HDD Info This function checks all information of HDD such as how many discs are stored and the HDD s available space Image Manager Used OCD 7DVD 6 HDD Info gt press ENT crea 41CD 8DVD 12 8 Format HDD This feature formats the HDD However you will be unable to format the HDD if the HDD image was selected as Reading Source You must go to 8 Select Source to select the Optical Drive as Reading Source Caution Format HDD ENT Format HDD gt press ENT to Format HDD gt press ENT orn 20 i confirmtormat gt Confirm Again confirm and start Complete executing f gt 7 ABOUT HDD MANAGER Image Manager 7 Format HDD a pees ENNS Our duplicator uses rational and dynamic HDD management technology The traditional method of formatting an HDD requires you to choose the number of partitions designated for DVDs and CDs before formatting your hard drive The problem is that you might not be able to predict how many DVDs or CDs you will load onto your hard drive Many incomplete partitions can be created mainly with new DVD disks constantly coming out such as the double layer DVD You need an intelligent and more dynamic way to manage your HDD and our HDD manag
4. Used 2 DVD 3CD e Note DVD indicates 5GB partition Free 5DVD 26CD and CD indicate 1GB partition After load 4GB DVD HDD info Used 3DVD 3CD Free 4 DVD 22 CD ll Smart Image File Management 1 When Discs are loaded into HDD as stored disc images the system will assign a file name to the image file beginning from A001 e Note Each time a new disc image is loaded the system will automatically search and assign the lowest number as the file name For example if there are no deleted files the file name will be assigned in sequence beginning from A001 However if there is a deleted file such as A003 then the file name will be held The next time there is a new disc image stored the lowest number of A003 will be assigned as this new disc image s file name You are allowed to delete an image file by executing 12 5 delete image Once an image file is deleted the name of the file will be left empty and held for a future loaded image file The existing file name will not be changed or moved ahead due to the deletion Use 12 4 Image Info function to check image file information The image information will display the image file name Disc type and file size image info PENN i A001 DVD 3875MB gt 3 8 56B DVD disc image file A001 image info CD disc image with 65 min A003 CD 65 28 28 sec file A003 21
5. User s Manual Version 1 0e 1 to 3 targets 1 to 7 targets 1 to 11 targets CD DVD Duplicator Controller 1 INTRODUCTION 2 Features 3 Specifications 4 Hardware Installation Guide 5 LCD Front Control Panel 6 Men 11 12 u Overview Copy Test Copy amp Verify Copy amp compare Verify Compare Disc Burn Speed Select Source Audio Track Edit 9 1 Select and Copy Track 9 2 Close Disc 9 3 Disc Info Utility 10 1 Prescan 10 2 Quick Erase 10 3 Full Erase 10 4 Eject All Disc 10 5 Disc Info 10 6 Drive Info 10 7 System Info 10 8 Update BIOS Setup 11 1 Power On Time 11 2 Auto Start 11 3 Startup Menu 11 4 Write Method 11 5 Button Beep 11 6 Read Error Skip 11 7 Eject on Start 11 8 Boot Password 11 9 Setup Password 11 10 Clear Setup Image Manager 12 1 Select Image 12 2 Disc to Image 12 3 Reader Speed 12 4 Image Info 12 5 Rename Image 12 6 Delete Image 12 7 HDD Info 12 8 Format HDD 7 About HDD Manager CONTENTS rior 2 an A 2 A cla ehiseucSecscsusereseineweereutecs 3 BOE EOC CE ECE EEE OPP ET 4 A ei 4 dra 5 A iii 7 A O 7 OT 8 O TN 8 A ina 9 eiii ii 9 A A A T 10 T E E E decaddoecestetetssucesacdscnssteetsees 10 E E iia 11 A a a a 11 ETETE IEP E TEA TETTETETT 12 A T 12 A E A 12 EEEE A AA EAS 12 A EEE 13 EAEE EENE EEE 13 TA E E E 13 eo ETETETT 13 ERE 13 le Mee iN ae ad 14 O OT 14 O 14 ad A tad 14 AAA DA DA E 15 A o arios ca 15 a E ani n 15 A A A
6. You can disable or turn on the auto start function with the time 1 99 seconds it would take to activate this feature To execute this function you must set the operation mode from COPY TEST VERIFY COMPARE COPY amp VERIFY COPY8 COMPARE to auto start copying Auto Start gt press A v to set 3 seconds seconds e Note If you set the function off the LCD screen will not show how many blank discs are detected in writer trays 11 2 Auto Start Setup 2 Auto Start 3 press ENT gt 11 3 Startup Menu 3 1 1 You can select which function in the menu to see first when the duplicator is turned on Startup Menu gt move A w to select 1 Copy Disc function You can select which mode to duplicate CD from DAO SAO and TAO The default mode is DAO Disc at Once Unless it is clearly understood what such terms represent we strongly recommend users to set it as Disc at Once 1 1111111111 11 1 Setup 3 Startup Menu 2 press ENT gt 11 4 Write Method Setup gt press Write Method Eat 4 Write Method ENT DAO gt move Aljv to select 11 5 Button Beep Choose whether or not to hear a beep when you press a button Setup gt press Button Beep gt move A v to select 5 Button Beep ENT gt ON ON OFF 11 6 Read Error Skip Choose to stop the duplicating process when error has occurred 15
7. 15 ESA AAA AAA 15 AA AA td 16 wave E pele 16 eb enlsonans obbegs 16 digs gobecd ON 17 O 17 ANA A 17 ia In AAAI E TETS 18 RA dat cta 18 A e Dd eased a 18 O E 19 OOO 19 E 20 da In Aaa 20 raci n 20 EE 1 INTRODUCTION The Athena series duplicator functions both as stand alone CD DVD Disc Duplicator Controller and supports up to 11 CD DVD discs There is up to 12 IDE ports on the controller each of which is independent from one another This gives the controller the ability to control several CD DVD devices at once There is no need for the drives to be of the same brand and or speed The controller can support up to 11 discs duplicating simultaneously at a maximum of 56x CD writing and 16X DVD writing speeds This easy to use operating control panel consists of an LCD screen and 4 control buttons All operating information such as the function list instructions operating status or error message s is displayed in real time on the screen The built in Hard Drive allows users to load several CD DVD Master Source Discs onto the HDD as source disc images This reduces the risk of damaging the Source Disc that result from heavy duplicating jobs A forceful HDD management system dynamically assigns HDD partitions to each CD DVD disc image loaded onto the HDD accordingly This ideal HDD manager will ensure a flexible and efficient HDD management process 2 FEATURES e 1 to 3 1 to 7 1 to 11 IDE to IDE CDIDVD Disc Duplicator Controller e
8. 79 45 source disc gt 7 Copying gt 10 08 00 Copying finished and Verify 79 45 gt 100 finished start verification gt 45 35 45 and Eject discs e The verification process makes a Disc Readability Check This operation will check the master disc and the copied discs readability to make sure all of the copies are readable 4 COPY amp COMPARE This operation will start the copying process and will continue with a Comparison process to ensure data correctness Therefore the duplicator will not eject discs until a disc Comparison is complete a This operation will directly copy the Master Source onto a blank CD DVD disc Before the use of this menu make sure you have put the correct reading source and blank discs b The system will automatically display how many blank discs are detected c When the system is ready to copy just place ENT to execute CD DVD copies d When the system starts the copying process it will start loading the disk It will then analyze the disks and then start copying During the copying process the LCD screen will display the Master Source Disc s data size and copying progress e When finished the system will continue with the Comparison process to ensure the discs have the same information as the master source f When the Comparison is complete the Writer Trays will eject the discs 4 Copy amp Compare Copy amp Compare 7 discs detected gt Press ENT to load discs Loading Disc
9. Auto detect IDE devices e 2x16 LCD display and 4 control buttons e Supports up to max 56x CD duplication 16x DVD duplication e Offers flexibility in setting different duplication speeds depending on Disc writers e Easy to select Drive as the Master Reading Source e Support for an IDE Hard Drive Device Source CD or DVD disc can be loaded onto the Hard Drive as disc images e Customizable Hard Drive Partitioning Create a Hard Drive partitioning name for easy storage e Support for Audio Track editing Combine audio tracks into one customized CD e Special PreScan feature evaluates master source disc before copying e Support System Startup Password Protection Prevent unauthorized use of duplicator systems e Support Setup Password Protection protects custom settings on duplicating systems e Support for copying simulation prevents failures caused by defective blank discs or damaged source discs e Support for Verification function ensures copied disc s readability e Support Counter Function e Supports all major disc types e Auto detect source disc e Can set beep button on or off e Firmware is easily upgradeable Simply place a CD in any drive and in a matter of seconds the firmware is automatically updated e CD DVD Rewriteable Drive Firmware upgradeable through the controller 3 SPECIFICATION Power Voltage 5V 5 Current 0 7A Max Environment Working Temperature OC 75C Storage Temperature 20 C 85 C Humidity Working Hu
10. ENT The duplicator will automatically start loading the disc analyzing the source disc and start the Comparison function c When the Comparison process is complete the duplicator writer trays will automatically eject 6 Compare l Compare 79 45 7 discs detected 3 Press ENT to load discs gt Loadino Disc 3 Analyzing source disc gt Compare 79 45 3 100 Finished and 45 35 45 eject disc Compare 79 45 gt Start Analyze Disc Comparison gt e Note You can ONLY use the compare function when duplicating DATA discs 7 SELECT SPEED This operation allows you to adjust and select the Duplication Speed for the three different disc types CD Audio CD and DVD a Press A v to navigate the menu 7 SELECT SPEED and press ENT b You will see three disc types CD Audio CD and DVD Press A v ito select a disc type and press ENT to confirm your selection c Press A v to select the burning speed 7 Set Burn Speed Press ENT amp Burn Speed Setting normal data 7 AM CD 52 gt Press ENT Cp burning speed Burn Speed Setting Audio A r gt Press ENT CD burning Audio CD 40 speed Burn Speed Aa gt A lv gt Press ENT Setting DVD ANote This is only available DVD 8 burning speed on DVD duplicators 8 SELECT SOURCE Use this function to set an Optical Drive
11. Setup 5 Boot Password If you select Enable you will need to choose a password Boot Password gt _ Use JAJ Y to select the character you want Press ENT will go to the next position There are total of 6 positions for the password To enable the password set all 6 positions An empty space is ENT Press ESC to cancel the process The duplicating system will ask for password when 11 Setup is entered 11 10 Clear All Reset the operations back to manufacturer s default settings Setup gt press ENT clear all settings made and return back to 10 Clear Setup manufacturer s default setting 12 IMAGE MANAGER For Duplicator with HDD Installed This function shows how to perform various Hard Drive related operations The system menu will not show this function if your duplicator does not have an HDD installed Please refer to 12 8 ABOUT HDD MANAGER for more information about the special function and advantages about this feature 12 1 Select Image This function shows how to select an Image file as a Source that can be copied to discs This function is required when a copy is made from your HDD to blank discs Please refer to 12 1 1 for instructions on how to make Hard Drive to Disc Copies Image Manager Select Image move AL IV to pee A001 DVD 4469M select and press 1 Select Image ENT gt la ENT to confirm 17 Make Hard Drive to Disc
12. Copies a Make sure Hard Drive is set to Master Reading Source When it is finished select the image then HDD will automatically be set as the Reading Source b Return to the main menu and press the up or down buttons to select 1 Copy function c Insert blank discs into writer trays If there is a disc in the Reader tray it will not be read d Press ENT to start copying If 11 2 Auto Start is selected when a blank disc is placed in any of the writer trays the duplicator will automatically begin the copying process e When completed trays will eject e Note Once an HDD Image is selected the HDD will automatically be set as the Reading Source If you wish to make Disc to Disc Copies you must go back to 8 Select Source to select the CD DVD ROM as the Reading Source 12 2 Disc gt Image This function shows you how to load the master source disc onto the Hard Drive and save it as an image file a Place Master Source Disc into any Drive b Select 12 2 Disc gt Image and press ENT Image Manager gt press ENT Disc gt A001 100 gt Disc gt A001 2 Disc gt Image gt 10 446MB Finished The source disc loaded to HDD as image file A001 e Note The source disc can be placed in any Reader or any Writer Drive 12 3 Reader Speed When you wish to perform this function 12 2 Disc gt Image set the Reading Speed from the reading master source disc Image Manager 3 Rea
13. M capacity and Firmware version Setup ENT P727DVD 64MB 7 System Info press ENT Ver 1 00 10 8 Update BIOS When manufacturer s certified update CD is inserted this operation will automatically update your duplicator s software Turn on the duplicator select 10 Utility and press ENT Insert an updated CD to any Drive Select 8 Update BIOS and press ENT The system will then start executing the firmware update When finished the updated CD will automatically eject e In 2 sec the system will re boot The new firmware update is complete Setup Upgrade BIOS 8 Update BIOS 7 NSST Update COS pres EMTS waiting Dis gt Upgrade BIOS Start update 5 Start update eject 2 Identify Disc Writing 5 Rive Pass CD New BIOS updated E 20 5p 11 SETUP Use this function group to change the manufacturer s default setting 11 1 Power On Time You can set the system warm up time from 5 sec to 255 sec after system power on a Select 11 Set Up and press ENT b Select 1 Power On Time and press ENT c Press A vto increase or decrease the seconds 14 Setup 1 Power On Time 3 press ENT gt Power On Delay press Ally to set 15 seconds seconds This operation allows the duplicator to automatically execute copying once source disc is placed in the master source drive and recordable discs in any of the writer trays
14. art up 11 9 Setup Password Allows setting or changing the password for Setup 11 10 Clear Setup Resets all of the operations back to manufacturer s default 12 IMAGE MANAGER Demonstrates how to perform various Hard Drive related operations If duplicator does not have HDD installed the system menu will not show this function 12 1 Select Image Used to select an Image file as a Source to be copied to the discs 12 2 Disc gt Image Used to copy a Source Disc to HDD to save as an Image file 12 3 Reader Speed The following function 12 2 Disc gt Image function will allow you to set the Reading Speed of the master source disc 12 4 Image Info Checks the image file information and file size 12 5 Rename Image This function renames the HDD image partition s name Deletes an image file in HDD If the file is selected as the source 12 6 Delete Image file you will not be able to delete it unless you go back to 12 1 to re select the image Checks the information in HDD such as the number of discs stored 12 7 HDD Info on the HDD and the amount of space left in the HDD 12 8 Format HDD This feature will allow you to format the HDD However if HDD image was selected as the source you will not be able to format it 6 1 COPY The following operation shows how to copy a Master Reading Source to a blank CD DVD disc If you would like to make Disc t
15. cally ensure data correctness Creates copies and is followed by a Comparison process to ensure data 4 COPY amp COMPARE correctness Enables the use of Disc Readability Check This operation will check 5 VERIFY all master and copied discs readability to confirm that all the copies are readable Used to make a bit by bit Comparison between the Master Reading 6 COMPARE DISK Source and all the copied discs inside the writer trays It assures that the copies have the same information as the Master Reading Source Enables to select Duplication Speed for three different disc types 7 SET BURN SPEED CDs audio CDs and DVDs Used to set the Master Reading Source as Optical Drive or Hard Drive 8 SELECT SOURCE Disk Makes Audio Tracking Selection It combines audio tracks from 9 TRACK EDIT various CDs into a single customized audio CD 10 UTILITY Confirms whether or not the Master Source Disc can be properly 10 1 Pre scan duplicated Quick erase re writable discs data 10 2 Quick Erase Full erase re writable discs data 10 3 Full Erase Ejects all discs in writer tray including master source disc 10 4 Eject All Disc Checks disc s basic information such as disc type data length and 10 5 Disc Info available space Checks the duplicator s major component information such as the 10 6 Drive Info manufacturer Writer or Reader model numbers and versions Provid
16. der Speed e Note this function is ONLY available when loading the Source Disc to an HDD 12 4 Image Info This function checks all image file information such as the Image file number Disc type and its file size Image Manager gt press Image Info 4 Image Info ENT gt A001 DVD 4469MB 18 Image Info A001 DVD 3875MB gt 3 875GB DVD disc image file A001 image info gt CD disc image with 65 min A003 CD 65 28 28 sec file name A003 12 5 Rename Image This function allows you to rename an image file in HDD This will help organize the image 001 A001 DVD Image Manager 6 Delete Image rm press Edit Image Name A001 ENTS gt press ENT gt E v se A v to select the character you want Press ENT to go to the next position There are total of 8 characters for the image name Empty Space will confirm the name change Edit Name Change ENT NewName OK gt Press ENTS Press ESC A001 gt NewName to cancel the whole process 12 6 Delete Image 4469M gt Select the image file you would like to rename gt This function allows you to delete an image file in HDD If the file is selected as source file you will not be able to delete it unless you go back to 12 1 source Image Manager 5 Delete Image a DELETE Image gt press ENTS A001 DvD 4469M gt press gt press ENT
17. e WRITERS will be set as Writers and numbered on a sequence beginning from Drive 2 then to Drive 3 etc 4 Installed Installed Installed When all Drives are installed assure that the READER drive is connected to the HDD The READER will be set as the Source Reader and as Drive 1 WRITERS will be set as Writer and numbered in order from Drive 2 Drive 3 etc 5 LCD FRONT CONTROL PANEL 1 Control Buttons There are 4 control buttons A v ENT and ESC A UP backward used to navigate backward in the menu gt v Down forward used to navigate forward in the menu ENT OK Enter Execute the function ESC Escape Used to go back to previous function 2 LCD Display The LCD display is a 2x16 Mono LCD screen The system displays function information messages and instructions on the LCD ee 6 MENU OVERVIEW Allows making a CD DVD copy Before the use of this function assure that the correct reading source and blank discs are placed The 1 COPY system will automatically display how many blank discs are detected When the system is ready press ENT to execute CD DVD copies This functions process is the same as above except it will not record 2 TEST to the recordable disc The purpose of this process is to ensure an error free duplication Creates copies and is followed by a Verification process to 3 COPY amp VERIFY automati
18. er can do that for you Our Dynamic HDD Manager consists of the following special features lI Auto Detect Disc Capacity and Dynamically Assign Partitions 1 When you first format the built in HDD our duplicator will automatically divide the HDD into 1GB partitions A DVD or CD partition does not have to be selected in the beginning 2 You can check HDD information in function 12 6 HDD Info The Hard Drive s capacity is presented in terms of how many DVD or CD discs you can load For example if your built in HDD is 40GB then the system will show the HDD available capacity or 20 e Note DVD is calculated by 5GB and CD is calculated by 1GB 3 Every time a source disc is loaded the duplicator will auto detect the disc capacity and assign correct partitions for it For example if you load a 4GB double layer DVD disc into HDD as a disc image the system will automatically detect and assign 4 partitions for it Dynamic calculated and display HDD capacity The duplicator will present built in HDD capacity information dynamically depending on your loaded source disc s capacity For instance before loading a 4GB DVD disc as source disc image the HDD information shows the HDD capacity that is available for loading 5 DVD s or 26 CD s However after loading a 4GB DVD the system will re calculate the total available partitions and display how many DVD or CD discs you can load as disc image the next time Before load 4GB DVD HDD info
19. error free duplication gt Press ENT to load disc 2 Test 79 45 a t in Test 79 45 7 discs detected ang SACO Copying Loading Disc simulation gt gt Analyzing Test 79 45 gt Start Test 79 45 pe source disc gt Analyze Disc Simulation gt 10 08 00 ee e A 3 COPY8 VERIFY This operation will start the copying process and will be followed by a Verification process to ensure data s correctness Therefore the duplicator will not eject discs until verification is complete a This operation will copy the Master Source onto Blank CD DVD discs Before the use this function assure that the correct reading source and blank disks have been set b The system will automatically display how many blank discs were detected c When the system is ready to copy press ENT to execute CD DVD copying d When the system starts the copying process it will start loading the disk It will then analyze the disks then start copying During the copying process the LCD screen will display the Master Source Disc s data size and copying progress e When finished the system will continue a verification to make a disc Readability check When the verification is complete the Writer Trays will automatically eject the completed discs 3 Copy amp Verify Copy amp Verify 7 discs detected gt Press ENT to load discs gt Loading Disc amp Verify79 45 3 Analyzing epee gt Start Copy
20. es the duplicator s information such as the Controller model 10 7 System Info number Buffer memory capacity and Firmware version As manufacturer s certified update CD is inserted this feature 10 8 Update BIOS instantly updates duplicator s software 11 SET UP 11 1 Power On Time After the system power is turned on the system s warm up time can be set from 5 sec to 253 sec 11 2 Auto Start This feature allows the duplicator to automatically execute copying once recordable disks are inserted to the master source disc and writer trays The setting can be turned off or the amount of seconds can be set to 1 99 To execute this function the operation mode has to be set to COPY TEST VERIFY COPMARE COPY amp VERIFY COPY COMPARE 11 3 Startup Menu The function in the menu which will be shown first can be selected when the duplicator is turned on 11 4 Write Method CD duplication mode can be selected among DAO SAO and TAO The default mode is DAO which means Disc at Once 11 5 Button Beep Gives the option to hear a beep as you press a button 11 6 SkipReadError Gives the option to stop duplication process when an error has occurred or simply continue the process 11 7 Eject on Start Allows choosing whether the duplicator system will eject the disc on startup 11 8 Boot Password Allows setting or changing the password at st
21. l appear on top of each selected track Track Edit Em ab c gt Press ENT gt 1 Copy Track ENT 1234567 cd e 7 89100K 3 Press ENT to start burning Once the tracks have been selected press w to move cursor to the end of the OK display And press ENT to confirm and submit your selection vi to 9 Audio Track Edit menu gt move A w and press ENT to select tracks gt Once you submit selection Copying Audio Tracks will appear on your LCD screen It will display the track number total number of the current tracks and the position that is copying Track 02 06 14 Copy 03 14 Once the Copying Audio Tracks process is complete copied CD will be displayed It reveals the total tracks on the CD total time used and total time remaining Track Used 20 53 04 Free 59 25 h You will need to finalize as indicated on 9 2 before playing back If you choose NOT to finalize you can go back to the first step to continue the process If you choose to finalize use 9 2 Close Disc e Note Once you finished copy Audio Track you will NEED to perform 9 2 Close Disc function for your audio CD If you do not your audio CD will NOT play 11 9 2 Close Disc Use this process to make a CD R CD RW disc become a playable Audio CD a Select 9 Track Edit and press ENT 9 Track Edit b Move to select 2 Close Disc and press ENT to star
22. midity 20 80 Storage Humidity 5 95 Dimension Length 176 mm Height 42 mm Width 146 mm Max Burn CD Max Burn DVD Buffer Memory Total IDE Port Model SPEED SPEED Size Number Athena CD3 56X N A 32 MB 4 Athena CD7 56X N A 32 MB 8 Athena CD11 56X N A 64 MB 12 Athena DVD3 56X 16X 32 MB 4 Athena DVD7 56X 16X 64 MB 8 Athena DVD11 56X 16X 128 MB 12 TE 4 HARDWARE INSTALLATION GUIDE The following are the basic operation guidelines on how to set IDE devices as Optical READER WRITERS or Hard Drives The system auto detects the drives then assigns Drive numbers READER WRITER HDD System Setting Information 1 Installed Installed No When machine is turned on the system will detect and assign the READER drive as Source Reader Then it will automatically be set as Drive 1 WRITERS will be set by sequence after the READER drive starting from Drive 2 Drive 3 etc 2 No Installed No When machine is turned on the system will assign the WRITER drive connected to Port 1 of the controller as the Source Reader and set it as Drive 1 The rest of the WRITERS will then be set as Writers and numbered on a sequence beginning from Drive 2 and so on 3 No Installed Installed When machine is turned on the system will assign the WRITER drive connected to HDD the Source Reader function lt will automatically assign Drive 1 Then the rest of th
23. o Disc copies make sure the Master Reading Source is set as the READER a Turn on the duplicator before you start copying and make sure the correct reading source and blank disks have been set b The system will automatically display how many blank discs were detected c When the system is ready to copy press ENT to execute CD DVD copies d When the system starts the copying process it will start loading the disc It will then analyze the discs and then start copying During the copying process the LCD screen will display the Master Source Disc s data size and copying progress e When the copying is finished the Writer Trays will automatically eject 1 Copy 79 45 Press ENT to load disc and Copy 79 45 7 discs detected execute copying gt Loading Disc gt analyzing Copy 79 45 gt Start Copy 79 45 ee source disc gt Analyze Disc Copying gt 10 08 00 a e Note 2 If your duplicator has a HDD installed and you would like to make Hard Drive to Disc copies refer to 12 1 1 HDD Image Manger for more information 2 TEST a This function is similar to the COPY process with the exception of the writing on the recordable disks b PressiAjor lv to navigate the function menu to 2 Test and press ENT c The system will auto detect the numbers of blank disc and start to simulate the COPY process However there is no data that will be written onto the blank disc d The purpose of this process is to ensure an
24. or Hard Drive Disk as the Master Reading Source a Move to 8 Select Source and press ENT b Press Aj y to select either HDD or an Optical Drive with assigned number as the reading source 8 Select Source gt Press Source Drive gt ENT gt HDD ST380021A gt movelA lv Source Drive gt gt Press ENT to to select D 1 DVD ROM finished setting e Note If HDD was selected as Source then follow 12 1 Select Image s instructions to be familiar with how to select image files as your reading source e Note Each Optical Drive will be assigned a Drive according to their installation sequence If there isn t then Drive 1 is automatically set as the Reading Source 10 9 AUDIO TRACK EDIT This process will guide you on how to select audio tracks from various audio CDs and combine them into one customized Audio CD 9 1 Select and Copy Track a MovelA 9 Track Edit Insert an Audio CD with music tracks in the Reading drive and Insert ONLY ONE Blank CD R disc into one of the writers As soon as both audio CD and blank CD R are recognized the following message will appear ready to press ENT on duplicator LCD screen ow Navigate the menu by pressing A v to find the desired track number and then press ENT to confirm the selection Repeat the process to choose the tracks that will be copied to the disk The letter a b c d wil
25. rasing is in process If you see F f blinking DVD RW Disc Formatting is in process 10 3 Full Erase Quick Erase Disc gt Erasing done _O___O_o and eject discs This operation will erase re writable discs in the Writer Tray It is timelier than Quick Erase function When finished the writer will automatically eject the trays Utility Insert re writable disc and Full Erase Disc as Erasing 3 Full Erase press ENTI gt SA 0 a eject 10 4 Eject All Discs Ejects disks including master source disc and discs in writer trays Utility 4 Eject All Disc 3 Press ENT Eject all discs 10 5 Disc Info This feature checks disc s basic information such as the disc type data length and available capacity Utility NT 7959 5 Disc Info PpressIENT gt O R use 27 53 10 6 Drive Info This feature checks the duplicator s major component information such as its manufacturer Writer or Reader model number and version a Press ENT and then press up or down to check each Drive s model number and information b The duplicator will assign each drive a number from 1 to 8 1 is the Reader 2 8 are writers 13 Utility gt 6 Drive Info a Press ENT 10 7 System Info 1 Port8 0 3 38 press Al vlto select CD ROM Max 52X different Drives This feature provides information about the duplicator such as the controller model number RA
26. t close disc process c When Close Disc is processing you will see o O blinking on the screen d When the process is done writer will automatically eject the disc and you will see on the screen Track Edit ENT Close finished and 2 Close Disc Press ENT gt Finalizing Disc eject disc 9 3 Disc Info This feature allows you to check your disc status such as available capacity a Moveto 9 Track Edit and press ENT b Select 3 Disc Info and press ENT Track Edit 1 79 59 3 Disc Info Press ENTS CD R Use 27 53 10 UTILITY This function group includes several Disc related functions You can press ENT and press the up or down button to select the desired function 10 1 Prescan This feature will check whether or not the Master Source Disc can be duplicated a Select Utility and press ENT 10 Utility b Select 1 Pre scan and press ENT Utility Prescan 76 24 o Prescan 76 24 PERSEN 2 20 15 30 a OU Finished 12 10 2 Quick Erase This operation erases re writable discs in the Writer Tray When it has finished erasing the tray will automatically eject The duplicator can erase different types of re writable discs simultaneously You can place the re writable disc you wish to erase in any tray Utility 3 insert re writable discs and 2 Quick Erase press ENTS e Note If you see O o blinking E
Download Pdf Manuals
Related Search