Navigator 3000 User's Manual
Contents
1. Exit setting mode oson By means of tactile zone or E select the DST ON function to change the date or DST OFF to eliminate the daylight saving time change Confirm to access the settings select the day and month of the start of daylight saving time for the current year by means of tactile zone or Press the crown to confirm the setting select the day and month of the end of daylight saving time for the current year by means of tactile zone or Press the crown to confirm the setting 140_EN 06 12 Navigator 3000 Alarm mode Your watch has two different day alarms which can be set separately over 24 hours and or over 7 days see Expert mode At the programmed time an audible alarm is triggered To stop the alarm press the crown briefly Note 5 tunes are available to choose from Pt Cus Alarm activated Alarm not activated Touch the screen to select alarm 1 or 2 or to navigate through to the SET function To access alarm setting select the SET function and confirm by pressing the crown Touch the screen several times to access the alarm you wish to change then press the crown to confirm your choice HE a AL OFF T Setting the selected alarm Tem Rin 1 Activate the alarm by means of the tactile zone e or Confirm by pressing the crown by deactivating the AL1 OFF alarm2. T TISSOT SWISS WATCHES SINCE 1853 Navigator 3000 User s Manual Congratulations We would like to thank you for choosing a watch from Tissot one of the most highly renowned Swiss brands in the world Your Navigator watch forms part of the Tissot touch screen range and benefits from the most recent technical innovations including the famous touch screen technology Via the touch screen you can select from the various functions available namely the local time and the time in four other time zones 150 countries and cities stored in memory 2 alarms calendar automatic summer winter switchover and perpetual calendar up to 2099 chronograph and timer The dual display analog and digital informs the user simply and logically concerning the function selected Modern at once sporty and elegant and featuring useful functions the Navigator 3000 watch will satisfy all men of action who are frequent travelers Important Your Navigator watch is water resistant to 5 bar 50 m 165 ft However no function can be activated if the crystal is in contact with a liquid According to the data valid in the country when the watch was programmed www tissot ch 1 8 140_EN 06 12 or Official service m a TISSOT TACTILE WATCHES MUST NLY BE SERVICED BY ISSOT S AUTHORIZED STOMER SERVICE ERS WHICH ARE LOCATED IN Recommended service prices Es q a ay Navigator 3000 TISSOT SWISS WATCHES SI
3. you exit setting mode TH Setting the alarm over 7 days See Expert mode BONHEUR amp Select a tune by means of the tactile pad zone OF JA ag pasta the tune sounds after 2 Confirm by pressing the crown BONHEUR T Set the hour and minutes by means of the tactile zone or e Confirm each setting by pressing the crown Exit setting mode www tissot ch 7 8 SWISS WATCHES SINCE 1853 Expert mode Alarm activated over 7 days Setting the alarm over 7 days You can set an alarm so that it sounds on different days of the week at a fixed time When an alarm is activated press the crown for 5 to access weekly setting of this alarm All the days of the week are activated by default Deselect the days that you don t wish to activate by means of the tactile zone e or e Confirm the day and go to the following day by pressing the crown O HEAR amp mie 4S Ca Comments Day 1 corresponds to Monday day 2 to Tuesday and so on By combining your two alarms and the setting for the days you can very easily create one alarm for the week and another for the weekend Chrono mode Your watch has a chronograph function When the period timed is less than 1 hour the minutes seconds and hundredths of seconds are displayed When the period timed is greater than 1 hour the hours minutes and seconds are displayed Touch the chrono
4. 853 Synchronization of digital time analog time If you detect a difference between the time displayed by the hands and the digital display you can reset the hands When the ECO BAT function is displayed press the crown for 5 and the hands should be positioned on midday Otherwise they should then be positioned as indicated below ECO BAT i ce Press tactile zone to move the minute hand forward Press tactile zone to move the hour hand forward Confirm by pressing the crown Touch the screen to select the desired region or to navigate through to the SET function To access the settings select the SET function and then press the crown T ZONE Eau the screen several times ETE until you reach the setting you TABS l Caja to change then press the crown to confirm your choice EXT EXT U 140_EN 06 12 9 8 Navigator 3000 Selecting another time zone TISSOT SWISS WATCHES SINCE 1853 pure E Change of reference time By means of tactile zone e or e select from the four pre memorized time zones the one you want to change Confirm your choice by pressing the crown First select a destination continent Use the tactile zone e or e to scroll the continents Confirm your choice by pressing the crown Then select a country Use the tactile zone e or eto scroll the countries Confirm your choice by pressing the cro
5. NCE 1853 Basic principles Crown Tactile zones A press for about one second on the crown activates the touch screen and can confirm a setting Enter and start stop the chronograph function and the timer function Each setting is confirmed by a short press lt 1 s on the crown Tactile functions The touch screen is active only after the crown has been pressed for about one second activation is confirmed by a beep lt remains acti ve for 10 seconds after the last operation Once the touch screen has been activated a mere touch of the finger on one of the six tactile zones of the screen activates the corresponding function namely the local time function O the time function in four other time zones amp the timer e incrementing function the chronograph e decrementing function the alarm function the calendar function e Once one of these functions has been selected the display modes ES 12 Incrementing can be changed in succession by touching the same zone again e Thel symbol indicates that you have to press the crown to enter the function displayed S A Decrementing e When the digital display indicates a setting can be made e When the digital display flashes it is possible either to make a correction with 8 or 6 or to confirm the setting by pressing the crown short press lt 1 s If no operation is performed during 10 seconds the last setting is not validated and the
6. S SINCE 1853 Timer mode Your watch has a timer function Once the programmed period of time has elapsed an audible alarm is triggered To stop the alarm press the crown briefly TmO0DODO Touch the screen to select the TIMER mode or the SET function SET i TMo34186 T Press the crown to activate or stop the timing operation displayed or select the SET function and press the crown to set the timer Set the hour minutes and seconds by means of the tactile zone e or e O LOE LE Ca Confirm each setting by pressing the crown After confirming the last setting the seconds setting the timer is activated automatically A further press on the crown stops timing Note The last time set remains displayed by default 5 seconds before the timing ends and a beep sounds for each remaining second Care and maintenance We would advise you to clean your watch regularly except for the leather strap using a soft cloth and warm soapy water After immersion in salty water rinse it in fresh water and leave it to dry completely Do not leave it anywhere where it might be subjected to major variations in temperature or humidity in direct sunlight or near strong magnetic fields To benefit from the highest standards of service and to ensure your guarantee remains in force please always contact an approved TISSOT representative or retailer TISSOT Quar
7. graph function on the screen IAE Press the crown to activate the CHODEB T chronograph Press the crown to stop the chronograph Press the crown for at least 2 to reset the chronograph CHODODD T 140_EN 06 12 TISSOT Navigator 3000 Mode date Your watch has a calendar function available on the digital display with 3 modes e day date e second date e week number Touch the screen to select the desired display or to navigate through to the SET function To access the settings select the SET function and press the crown LOLOH Touch the screen several times until you reach the setting you wish to change then press the crown to confirm your choice GLY i T Date setting O eo amp Set the year by means of the tactile ZONE 9 OF O a EDO Confirm by pressing the crown set the month and day by means of the tactile zone or e Confirm by pressing the crown TA Ca ce Day Month order of display TOTO CASETA HALA Ca select the month day or day month order of display by means of the tactile Zone OF Confirm by pressing the crown w ee Exit setting mode Note Your watch being set in factory there is no need to correct the date Reminder It is possible to change the language see Time function www tissot ch 8 8 TISSOT SWISS WATCHE
8. tion To access the settings select the SET function and press the crown EA Touch the screen several times de you reach the setting you Ea de to change then press the ECO BAT crown to confirm your choice ExT Select a continent Use the tactile zone e or e to scroll the continents Confirm by pressing the crown select a country Use the tactile zone e or e to scroll the countries Confirm by pressing the crown Confirm your choice by means of tactile zone e or e C Confirm by pressing the crown If necessary perform setting of the hours and minutes by means of tactile Zone 9 OF Confirm each setting by pressing the crown Note Setting the second pulse e from 0 to 30 sec the display is rounded off to the next lower minute e from 31 to 59 sec the display is rounded off to the next higher minute www tissot ch 4 8 You can select one of the six available languages French German English Spanish Italian or Portuguese Use the tactile zone or to scroll the languages Confirm your choice by pressing the crown Deactivating the sound except for the alarm bell TORE GA Select the sound activated or TORE OFF sound deactivated mode by means of tactile zone or Confirm by pressing the crown Energy saving If you plan not to
9. touch screen is deactivated e After validating a setting the watch returns automatically to the time mode and the digital display indicates the last setting made e When the crown is pressed the watch emits a high pitched beep for confirmation while a low pitched beep indicates an inappropriate action Lighting Activation Adjustment To activate lighting of the digital display turn the crown to the left or right Once the lighting has been activated turn the crown to the right to increase the intensity or to the left to reduce it The lighting remains active for 10 seconds after the last operation You can remove the confirmation sound from your watch please refer to the time function in TONE ON mode www tissot ch 3 8 140_EN 06 12 Navigator 3000 Local time mode At delivery the hands on your watch indicate the local time The digital display indicates either the local time or the region of the local time If for whatsoever reason you wish to change the local time you can select a new time zone according to the procedure indicated below You can also select the display language French English German Spanish Italian and Portuguese activate the audible alarm or not and go into battery saving mode Local time setting TISSOT SWISS WATCHES SINCE 1853 Touch the screen several times to select one of the display modes or to navigate through to the SET func
10. tz watches benefit from the incomparable precision of quartz Their power reserve usually enables them to operate for more than 2 years in continuous use If you ever plan not to be wearing your watch for a period of several weeks or even several months we would advise you to activate the economy mode before putting your watch away This reduces the electrical power supply to the motors thereby extending battery life considerably Replacing the battery Once the battery has run flat it must be replaced without delay by an approved TISSOT representative or retailer Battery type button type lithium manganese dioxide primary battery cell ref Renata CR 2025 Note Battery end of life is indicated to you by continuous flashing of the digital display Collection and treatment of end of life quartz watches This symbol indicates that this product should not be disposed with household waste lt has to be returned to maa local authorized collection system By following this procedure you will contribute to the protection of the environment and human health The recycling of the materials will help to conserve natural resources valid in the EU member states and in any countries with corresponding legislation 140_EN 06 12
11. use your watch for a long period of time you can select the ECO BAT mode to economize the battery The watch goes into sleep mode the LCD screen goes out and the hands indicate 6 30 am To reactivate the watch press the crown for 2 Synchronization of digital time analog time See Expert mode Exit setting mode 140_EN 06 12 Navigator 3000 Expert mode Add the name of a city To add the name of a city select the NEW function by means of tactile zone OF e Confirm by pressing the crown One after the other select the letters of the name to be created by means of tactile zone e or e 8 letters at most Confirm each letter by pressing the crown After the final confirmation you can set the time If necessary see above Time zone mode Through its T World function your watch can display the time in four other time zones parameterizable The standard settings give the local time in New York Rio de Janeiro Thailand and Sydney but they can be changed by selecting one of the 150 other pre memorized zones You can also select the reference time with the SWAP function display the absolute time or the time difference with the ABS function and even in Expert mode alter the date for changing summer time and winter time DST or daylight saving time function EE Time difference Absolute time or GMT www tissot ch T TISSOT SWISS WATCHES SINCE 1
12. wn Then select a city if it is available Use the tactile zone e or e to scroll the cities Confirm your choice by pressing the crown you then exit setting mode DST setting daylight saving time see Expert mode From the T ZONE function press the crown for 5 to access the DST function Confirm to access the settings By means of tactile zone e or select from the four time zones the one you want to change Confirm to access the settings SUIT ZER Ca Note f you remove the country city from the T world function manual setting of the daylight saving time will also be eliminated www tissot ch By means of tactile zone e or e select from the four pre memorized time zones the one you want to use as reference time Confirm your choice by pressing the crown This time becomes the refe rence time Warning The SWAP function changes the local time with the time of one of your time zones As a result your local time is now in the T WORLD function and the time of your time zone can be found in the TIME function The alarms are synchronized with the analog display Changing the time display Absolute time Time difference Ts i E 0 select T ABS to display the absolute time or T DIF to display the time difference Confirm your choice by pressing the Crown TABS T
Download Pdf Manuals
Related Search