Operating Instructions Camera Head
Contents
1. or supplied lens cleaning tissue paper 2 Rotate the focus lock ring fully clockwise Mount the Pinhole Lens Wide angle Lens or Super Wide angle Lens to the camera by rotating it clockwise slowly Focus Lock Ring 10 GP KS822H with GP AD22TA and optional C mount lens 1 Remove the front cap of the camera head and confirm that the surface of the optical filter of the camera head is clean Front Cap Sam If the surface of the optical filter is dirty or dusts are on it clean it up with a blower brush which is for film camera lenses may be available at your local camera store or supplied lens cleaning paper 2 Attach the optional C mount lens to the C mount Adaptor GP AD22TA by rotating it clockwise 3 Rotate the focus lock ring fully Mount the lens and C mount adaptor by rotating them clockwise slowly Focus Lock Ring Caution If the optional C mount lens size exceeds 50 8 mm 2 in diameter 70 mm 2 3 4 in length and 300 g 0 66 lbs in weight both the camera and lens should be secured SPECIFICATIONS Pick up Device Horizontal Resolution Minimum Scene Illumination Signal to Noise Ratio Video Output Scanning System Synchronization White Balance AGC ELC Brightness Light Measurement Area Image Orientation Freeze Aperture Compensation Function Switches Controls Power Source Camera Cable Length Ambient Temperat2. 822 NORM AUTO ROTA B S VIDE AWC1 OQ VIDEO OUT 2 AWC2 Switch Label t When using in this mode please put the Switch Label the Switch Label is enclosed Camera Head GP KS822H x A S N w a S o fa E 3 o 2 a 3 G H A a Camera Control Unit GP KS822CU DC Power On Off Switch DC POWER ON OFF 2 Auto White Balance Control Button AWC START The white balance can be set by pressing this button when the White Balance Selection Switch is set to the AWC position White Balance Indicator 4 White Balance Selection Switch WHITE BAL AWC ATW MANU AWC The white balance is automatically set and fixed by detecting the characteristic color temperature of light source through the lens and controlling the gain of red and blue signal The White Balance Indicator blinks during the setting When the setting is successfully performed the White Balance Indicator turns off When the setting fails the White Balance Indicator turns on ATW The white balance is automatically and continuously set by detecting the characteristic color temperature of light source through the lens and controlling the gain of red and blue signal even if the characteristic color tem perature
3. ACE Panasonic s GP KS822CU and GP KS822H Industrial Color Camera overcomes space limitations that have complicated many video applications Weight of only 14 g 0 035 Ibs this remarkably compact camera measures only two thirds of an inch in diameter and less than two inches in length With the 380 000 pixel for NTSC 440 000 pixel for PAL 1 2 inch CCD pick up device horizontal resolution is more than 480 lines and signal to noise ratio is 50 dB Brightness Switch and knob lets you obtain the video level to your preference This CCU has a Freeze function for a still image and a Image Orientation function for rotating an image FEATURES N 10 11 12 13 14 1 2 inch Interline CCD image sensor 480 lines of horizontal resolution 6 Ix 0 6 footcandles at F1 4 of minimum scene illumina tion 50 dB of signal to noise ratio Selectable trough the Lens Auto Tracing White Balance ATW Auto White Balance Control AWC or Manual White Balance Control Automatic Gain Control AGC and Electric Light Control ELC are available Brightness Switch and knob enables to adjust the video level to your preference The preset 1 preset 2 and automatic setting mode are provided for Light Measurement Area Selection 2 memory AWC mode is available Freeze function Image Orientation function DC 12 V operation 2 m 6 6 ft and 3 8 m 12 5 ft cable length between camera head and camera control unit with optional cam era cab
4. Ibs Camera Control Unit 530 g 1 2 lbs Weight and dimensions indicated are approximate Specifications are subject to change without notice STANDARD ACCESSORIES e Operating Instructions this Document OPTIONAL ACCESSORIES e Camera Cable GP CA162 2 or GP CA162 38 C mount Adaptor GP AD22TA Wide Angle Lens GP LM3TA or GP LM7TA Pinhole Lens GP LP12TA Tele Angle Lens GP LM15TA or GP LM24TA 1d For U S Canadian and Puerto Rican fields Panasonic System Solutions Company Unit Company of Panasonic Corporation of North America Security Systems www panasonic com security For customer support call 1 877 733 3689 Executive Office Three Panasonic Way 2H 2 Secaucus New Jersey 07094 Zone Office Eastern Three Panasonic Way Secaucus New Jersey 07094 Central 1707 N Randal Road Elgin IL 60123 Southern 1225 Northbrook Parkway Suwanee GA 30024 Western 6550 Katella Ave Cypress CA 90630 Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario L4W 2T3 Canada 905 624 5010 http www panasonic ca Panasonic Sales Company Division of Panasonic Puerto Rico Inc San Gabriel Industrial Park 65th Infantry Ave KM 9 5 Carolina P R 00985 809 750 4300 O 2005 Matsushita Electric Industrial Co Ltd All Rights Reserved For the other fields Matsushita Electric Industrial Co Ltd Osaka Japan http www panasonic co jp global NM0405 0 3TRO0O3578AAA Printed in Japan
5. Panasonic Operating Instructions Camera Head Model No G P KS822 H Camera Control Unit Model No G P KS822C U Cable Option Before attempting to connect or operate this product please read these instructions carefully and save this manual for future use We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives EEC 73 23 and EEC 89 336 Wij verklaren als enige aansprakelijke dat het product waarop deze verklaring betrekking heeft voldoet aan de volgende normen of andere normatieve documenten overeenkomstig de bepalingen van Richtlijnen 73 23 EEC en 89 336 EEC Wir erkl ren in alleiniger Verantwortung da das Produkt auf das sich diese Erklarung bezieht mit der folgenden Normen oder normativen Dokumenten bereinstimmt Gem den Bestimmungen der Richtlinie 73 23 EEC und 89 336 EEC Vi erkl rer os eneansvarlige for at dette produkt som denne deklaration omhandler er i overensstemmelse med standarder eller andre normative dokumenter i f lge bestemmelserne i direktivene 73 23 EEC og 89 336 EEC Nous d clarons sous note seule responsabilit que le produit auquel se Vi deklarerar h rmed v rt fulla ansvar f r att den produkt till vilken r f re la pr sente d claration est conforme aux normes ou autres denna deklaration h nvisar r i ve
6. ed the neutral cleanser Use the lens cleaning tissue paper may be available at your local camera store for lens cleaning Connect this to a DC 12 V min 600 mA CLASS 2 Power supply only After using the camera turn OFF the DC power switch and put the lens cap on the camera head Every necessary procedures with regard to install this product should be made by qualified service personnel or system installers Caution Connecting or disconnecting camera cable to from the cam era control unit must be done after turning OFF the DC power switch Otherwise the camera head may be dam aged SYSTEM BLOCK DIAGRAM GP KS822 Standard Configuration Camera Head Tripod Attachment Camera Control Unit Optional Camera Cable FOCUS LOOK GP KS822H o Panasonic Camera Head GP KS822H GP CA162 2 2 m GP CA162 38 3 8m DC POWER ON OFF WHTE IMAGE BAL ORIENT awe Amo felina E anu E ROTA mw O R B BRIGHTNESS Panasonic AUTO manu LVEFREEZE Y Camera Control Unit GP KS822CU Optional Accessories Wide Angle Lens U Wide Angle Lens GP LM3TA GP LM7TA Pinhole Lens To Tele Angle Lens GP LP12TA GP LM15TA C Mount Adaptor Tele Angle Lens GP AD22TA GP LM24TA MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS Camera Control Unit GP KS822CU ae DEWA ITE IMAGE B sonic ORIENT 5
7. ese limits are designed to pro vide reasonable protection against harmful interference when the equipment is operated in a commercial environ ment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL FCC Caution To assure continued compliance example use only shielded interface cables when connecting to com The lightning flash with arrowhead symbol puter or peripheral devices Any changes or modifications within an equilateral triangle is intended to not expressly approved by the party responsible for compli alert the user to the presence of uninsulated ance could void the users authority to operate this equip dangerous voltage within the product s ment enclosure that may be of sufficient magni tude to constitute a risk of electric shock to SA 1965 persons The serial number of this product may be found on the sur face of the unit The exclamation point within an equilateral You should n
8. he power cord from being stepped on or pinched particularly at plugs convenient receptacles and the points where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip overs JN 0 SA S3125A RES 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as when the power supply cord or plug is damagea liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped CONTENTS IMPORTANTE SAFETNCINSTRUCTIONS dirt diana 3 FEATURES Ei e O o ta ed e ea e te Mn did 5 PREFACE 00d a E a Lt abate ae EA IIS AE IA Li AA 5 PRECAUTIONS isidro a lar da A O E E A E ab candeaabed NAE 6 MAJOR OPERATING CONTROLS AND THEIRFUNCTONS nta iia AnaS 7 SYSTEMBLOGKDIAGRA Mis a la dol died 7 PREPARACION Scott di OO AA nate mig AI RAI 10 SREGIE CAMONS Lt sock aces laces ness a dde de ed dd e da e dd de da 11 STANDARD ACCESSORIES uu lira alii a banded cobras te nee sl denen ghn taser ate 11 OPTIONAL ACCESSORIES sr o le el deceo edo CO 11 PREF
9. hot image changes to the MIRROR right and left reversal image 9 20 Light Measurement Area Selection Switch The back light sensing zone can be set in the BRIGHT NESS AUTO mode 00 OFF All of the screen 01 Preset 1 Pattern 1 Sensing Zone 10 Preset 2 Pattern 2 Sensing Zone Sensing Lt Zone Preset 1 Preset 2 11 Automatic Sensing Zone The sensing zone is auto matically set according to the object on 2 Aperture Level Selection Switch i The aperture level can be selected by this switch High level can be obtained by turning on this switch Low level can be obtained by turning off this switch Cable Selection Switch halos This switch is provided for the camera cable GP CA162 2 and GP CA162 38 When using the camera cable GP CA162 38 turn on this switch Camera Head GP KS822H Focus Lock Ring This ring is used to secure the Focus Ring PREPARATIONS Caution Keep the DC Power switch of the camera in the OFF position through the installation GP KS822H with GP LM3TA GP LM7TA GP LM15TA or GP LP12TA 1 Remove the front cap of the camera and confirm that the surface of the optical filter of the camera head is clean a MN If the surface of the optical filter is dirty or dusts are on it clean it up with a blower brush which is for film camera lenses may be available at your local camera store
10. le S VHS Video Output is provided PRECAUTIONS Do not attempt to disassemble the camera To prevent electric shock do not remove screws or cover There are no user serviceable parts inside Refer servicing to qualified service personnel Do not expose the camera or camera control unit to rain or moisture or do not try to operate it in wet areas Do take immediate action if ever the camera or camera control unit do become wet Turn power off and refer ser vicing to qualified service personnel Moisture can damage the camera and camera control unit and also create the danger of electric shock Ambient Temperature range Do not install the camera in the place which is beyond 10 C to 45 C 50 F to 113 F Do not drop anything inside the camera Dropping metal for example inside the camera could per manently damage the unit Never crush or pinch the camera cable Do not bend the camera cable into a curve whose radius is too small Whether the camera is in use or not never face it toward the sun Do use caution when operating the camera in the vicinity of spot lights or other lights and light reflecting objects Do not loosen the chassis of the camera head Do not connect Panasonic GP KS162CU and GP KS822H nor GP KS822CU and GP KS162H e How to take care of this camera After turning OFF the DC power switch clean it with a dry cloth If it is difficult to remove the dirt or dust clean it up with a cloth appli
11. oma C signals for S VHS VTR or monitor are provided at the connector 42 EVR Adjustment Connector This connector is used to connect with the EVR 43 Video output Connectors BNC VIDEO OUT 1 2 A composite video signals is provided at this connector DC 12V Input Terminals DC 12 V IN These terminals accept an external DC source supplying nominal power of 12 V min 600 mA CAUTION CONNECT THIS TO A DC 12 V CLASS 2 POWER SUPPLY ONLY Caution To prevent fire or shock hazard the UL listed wire VW 1 style 1007 should be used for the cable for DC 12 V Input Terminal 45 Electronic Light Control ELC On Off Switch mos When shooting the objects under the high light condition the lighting can be controlled by the electronic shutter mode This is used to disable the ELC function on AGC On Off Switch or When shooting the objects under the low light condition the video level can be controlled by the gain of the video amplifier This switch is used to disable the AGC function on 47 2 Memory AWC Mode On Off Switch m By turning on this switch the two kinds of white balance can be memorized The function of the White Balance Selection Switch is changed as shown below by turning on this switch WHITE BAL Awc awe 1 ATW E gt AWC 2 MANU Mirror Rotate Selection Switch When the Image Orientation Selection Switch is set to the ROTA this switch becomes effective By turning on this switch the s
12. ote the serial number of this unit in the space triangle is intended to alert the user to the provided and retain this book as a permanent record of your presence of important operating and mainte purchase to aid identification in the event of theft nance servicing instructions in the litera Model No ture accompanying the appliance Serial No SA 1966 WARNING To prevent fire or electric shock hazard do not expose this appliance to rain or moisture The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus 2 IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not use near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not misuse the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does nat fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect t
13. rensst mmelse med documents normatifs conform ment aux dispositions des directives standarddokument eller andra normativa dokument som framst lls i CEE 73 23 et CEE 89 336 EEC direktiv nr 73 23 och 89 336 Nosotros declaramos bajo nuestra nica responsabilidad que el producto a que hace referencia esta declaraci n est conforme con las normas u otros documentos normativos siguiendo las estipulaciones de las directivas CEE 73 23 y CEE 89 336 IImoitamme yksinomaisella vastuullamme ett tuote jota t m ilmoitus koskee noudattaa seuraavia standardeja tai muita ohjeellisia asiakirjoja jotka noudattavat direktiivien 73 23 EEC ja 89 336 EE s d ksi Vi erkl rer oss alene ansvarlige for at produktet som denne erkl ringen gjelder for er i overensstemmelse med f lgende normer eller andre normgivende dokumenter som f lger bestemmelsene i direktivene 73 23 EEC og 89 336 EEC Noi dichiariamo sotto nostra esclusiva responsabilit che il prodotto a cui si riferisce la presente dichiarazione risulta conforme ai seguenti standard o altri documenti normativi conformi alle disposizioni delle direttive CEE 73 23 e CEE 89 336 Caution Before attempting to connect or operate this product please read the label on the top and bottom For U S A NOTE This equipment has been tested and found to com ply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules Th
14. ure Dimensions Weight For NTSC 1 2 inch Interline transfer CCD image sensor with 768 H x 494 V pixels For PAL 1 2 inch Interline transfer CCD image sensor with 752 H x 582 V pixels 480 lines 6 Ix 0 6 footcandles F1 4 with AGC ON more than 30 IRE of Y signal with set up 50 dB Standard condition Y signal 1 0 V P P 75 Q composite video BNC connector x 2 2 1 Interlace Internal Sync only Auto Tracing White Balance ATW Auto White Balance Control AWC Manual MANU ON OFF Approx 12 dB gain at AGC on position ON OFF MANUAL AUTO FULL PRESET1 PRESET2 AUTO NORMAL ROTATE or NORMAL MIRROR FREEZE LIVE HIGH LOW Auto White Balance Control Button White Balance Selection Switch AWC ATW MANU Manual Image Orientation Selection Switch NORM Normal ROTA Rotate Brightness Selection Switch AUTO MANU Manual Live Freeze Button ELC On Off Switch AGC On Off Switch 2 Memory AWC Mode On Off Switch Mirror Rotate Selection Switch Light Measurement Area Selection Switch Aperture Level Selection Switch Cable Selection Switch White Balance R B Gain Control Brightness Control 12 V DC 450 mA GP CA162 2 Cable 2 m 6 6 ft GP CA162 38 Cable 3 8 m 12 5 ft 10 C to 45 C 50 F to 113 F Camera Head 17 Diameter x 35 5 D mm 2 3 Diameter x 1 1 2 D Camera Control Unit 120 W x 36 H x 157 D mm 4 11 16 W x 1 7 16 H x 6 1 8 D Camera Head 14 g 0 035
15. varies MANU The R B gain of the white balance can be adjusted manually by means of the R and B gain controls R B Gain Controls R B These controls are used to adjust the R and B gain of the white balance These controls work only when the White Balance Selection Switch AWC ATW MANU is set to MANU Image Orientation Selection Switch IMAGE ORIENT NORM ROTA NORM The shot image is outputted normally ROTA The shot image rotates 180 degrees Brightness Selection Switch BRIGHTNESS AUTO MANU AUTO When this switch is set to the AUTO position the ELC On Off Switch 45 and AGC Switch 40 becomes effective The ELC amp AGC of the target level changes by rotating the BRIGHTNESS control knob MANU When this switch is set to the MANU position the video level is adjustable by means of the BRIGHTNESS control knob Note Since the variable range of MANU is limited depending on the shot image conditions normally use in AUTO Live Freeze Button LIVE FREEZE The image carries out toggle operation of Freeze Live by pressing down the button Brightness control knob This controls the ELC amp AGC of the target level or video level Camera Cable Connector CAMERA This 16 pin connector is used for connection of camera cable Caution Connecting or disconnecting the camera cable must be done after turning OFF the Power ON OFF switch S VHS Video Output Connector S VIDEO OUT The Luminance Y and chr
Download Pdf Manuals
Related Search