USER MANUAL
Contents
1. SCHAUBLORENZ USER MANUAL OF DIGITAL SET TOP BOX I fe LoRENZ TNT 29520MPEG2 Please read and keep these instructions MP3 usse Important safety instructions please read carefully And keeps for future reference water rain or moisture To prevent the risk of electric shock do not remove the cover or back or this product In case of product failure only qualified To reduce the risk of fire or electric shock do not expose this product to A personnel can repair There are no user serviceable parts inside CAUTION Dangerous tension inside the product Do not open Risk of electric shock No parts can be repaired by the end user Only qualified personnel can repair and maintain this product If the electric cord is damaged it must be replaced by the manufacturer or qualified after sales personnel in order to avoid any danger The product must be installed in accordance with local laws Damaged batteries must be properly disposed In order to protect the environment please dispose the batteries properly in accordance with local laws information is available at your reseller Where to install the product Place the product on a straight rigid and stable place Do not place the product ona carpet Do not place the product on top or another that may cause overheating for example a receiver or amplifier Do not place anything underneat2. play channel 3 OSD Timeout sets some information hint dialogue box and displays time length 4 OSD Trans sets menu transparency 5 OSD Language Select the on screen display language as required 6 Mp4 Subtitle Language Allows you to select the subtitle language OSD Themel Theme1 Time on OSD OFF Theme2 OSD Timeout 5 Theme3 OSD Trans 10 Theme4 OSD Language English Theme5 MP4 Subtitle Langua French 1st Audio Langua English 2nd Audio Langua English Figure 8 16 7 1 st 2nd Audio Language This option allows you to select your first and second choice for the audio language If neither of your selected language is available on the program transmitted the main language of the program will be used You can alternatively press the AUDIO key to use another available language 8 3 2 TV Display TV setup provides convenient TV input mode you can via menu MENU gt Digital TV gt Configuration gt TV enter TV set Include Display Mode Aspect Ratio Video Output Brightness Contrast HUE Saturation All options are listed on the left of the menu when the cursor moves to the option on the left of the TV menu the values corresponding to this option can be displayed on the right of the menu Display Mode Aspect Ratio Video Output Brightness Contrast HUE Saturation Figure 8 17 Display Mode This option allows you to select TV system among PAL NTSC and Auto Aspect Rat
3. such as films may be broadcast in several different audio languages or formats To display available audio options of the DVB T channel that you are watching press the AUDIO button on the remote control After that use the UP and DOWN navigation buttons to select your preferred audio language or sound mode Note on AC3 mode Some DVB T programmes may be broadcast in AC3 mode In order to choose the AC3 sound tracks you should possess a home theatre and should have your receiver connected to your home theatre using a coaxial cable Remarks The availability of audio language and AC3 sound mode depends on DVB T programmes Some programmes may offer a single audio language and no AC3 sound track The AC3 sound track may also be available uniquely during certain hours of broadcast for instance it may be available only for films When you select the AC3 sound the audio output from your television s speakers is disabled since the sound is transmitted directly to your home theatre system from the receiver s coaxial output Please verify that your home theatre is capable of decoding AC3 sound beforehand If you have selected the AC3 mode and then switch to another channel which broadcasts only in stereo mode the output volume may increase Such change in volume is normal and is affected by your home theatre s settings To avoid any possible listening discomfort please consider reducing the volume before changing channel Figure 7
4. e Mie scu n Ta m are RU RU RR 28 1 Introduction This DVB T TV Receiver is a Free To Air digital terrestrial receiver allowing you to access free to air digital terrestrial TV channels and radio broadcasts on your TV set Its digital reception covers VHF amp UHF band Compared with the analog TV programs digital TV programs eliminate the noise and interference but offer high quality video and audio An on screen initial installation guide is provided so that you can easily start to enjoy watching the programs In addition a fully featured remote controller is included that offers you access to every feature with a simple press of a button Lastly with its USB port this product can also serve as a multimedia station which allows you to listen to MP3 music and to view JPEG photos as well as MPEG 4 videos Auto Standby In order to save energy the electricity consumption of this product has been reduced in both operation mode and standby mode Furthermore if no operation is carried out for three consecutive hours the unit will automatically enter standby mode Simply press the Standby button on the remote control to switch the unit back to operation mode Main Features Full comply with European DVB T standard Full MPEG2 ISO IEC 13818 transport stream compliant audio video decoding Bandwidth of 7 8 MHz supported COFDM demodulator Automatic manual channel search Channel edit moving and deletion Parenta
5. in use It is possible that some videos including those downloaded from unofficial websites are not fully compatible with this unit 2 This player does not support MPEGA videos recorded using a High Definition format The MPEG 4 HD and H 264 formats are different from the standard resolution one For the time being videos encoded in High Definition are only readable on computers 3 Maximum resolutions supported by MPEG 4 codecs and this unit are 720x480 30fps 720x576 25fps 4 Videos must be encoded with a soundtrack in MP3 format since other formats such as AC3 are not supported If there is no sound it means that the audio codec is not compatible 5 If your MPEG 4 video file does not appear on the unit s screen check that the file name ends with the extension AVI If this is not the case you can rename the file on your personal computer
6. regional settings include your OSD Language and Area Then press OK to proceed Initinstall OSD Language English English Area France France Spanish Portugues Nederland Figure 6 1 Note Make sure to select the region you are located since the receiver will scan the channels based on the bandwidth of the region you selected If your region is not on the list you are recommended to conduct a manual search Refer to Manual Search on page 18 for details 2 Select Yes to start the automatic channel search SCHAUB LORENZ N sapay ne Figure 6 2 3 Wait to complete the scanning In case you want to stop the scanning press the EXIT RECALL key The channels already found will still be stored Channel Search S No TV Channel 0500 Cambodia Video 0501 Kenya Video 0502 USA Video S No Radio Channel Channel 68 UHF 850166KHz 8M Progress Figure 6 3 4 When finished all active channels found will be stored Automatically The last found channel will be played Now you are ready to watch digital terrestrial TV channels and radio broadcasts In case you skip the First Time Installation screen you can still specify your Regional Setting and Program Search via the on screen setup menu The Regional Setting menu can be accessed via Main Menu gt Digital TV gt Configuration gt System Setup gt Area The Program Search menu can be accessed via Main Menu gt Digital TV gt Inst
7. 2 Screen Zoom 1 Press ZOOM to enable zoom mode and show a reading glass on screen left up 2 Press REV amp FWD to zoom current image being played if in full screen zoom in scaling order is zoom 2 zoom 3 zoom 4 zoom out scaling order is zoom 1 2 zoom 1 3 zoom 1 4 10 8 Using the On Screen Setup Menu 3 When zooming in press LEFT RIGHT UP and DOWN to move the image to the destination Press ZOOM or EXIT RECALL to cancel current image zoom mode 8 1 Channel Manager System offer an efficient function of channel management such as channel deleting marking moving locking sorting and grouping You can enter the page via Menu gt Digital TV gt Channel Manager Channel Manager Figure 8 1 8 1 1 Channel Organizer Channel organizer page includes favorite channels channel deleting moving locking and rename 1 Creating Favorite Channel Groups This feature allows you to group your favorite channels To create your favorite groups 1 Press UP DOWN key to select the channel which you would like to add to the group 2 Pressed the RED key one heart symbol would appear Pressing the RED key again will un select the channel from the favorite group 3 Once your favorite group is created you can press the FAVORITE key to quickly access your favorite channels 11 Figure 8 2 2 Moving a Channel 1 Select the channel which you like to move an
8. 3 Different volume levels between channels in AC3 format and those in stereo format Certain DVB T programs may be broadcasted in AC3 format which provides a superior audio quality via the coaxial output from the receiver If you chose the AC3 format and Switch to a channel in stereo format afterwards the audio volume may increase depending on the DVB T program format and your home theatre equipment This is normal in this case consider reducing the volume prior to changing channels to avoid listening gene 4 Receiving CANAL PLUS With this unit you can receive CANAL PLUS when the content is unscrambled free of charge When you scan and launch the channel search during the first installation and that CANAL PLUS is scrambled at that time it is possible that the unit classifies this channel as a scrambled channel and therefore as an unavailable channel In order to resolve this problem launch a new channel search as described in the section above at a time when CANAL PLUS broadcast unscrambled programs CANAL PLUS will then be listed correctly as a viewable DVB T channel 5 If the reception problem still occurs Your unit has been tested for optimal performance over all the country In most cases the DVB T reception problems are due to a weakness in your home s antenna installation If your installation is old or has never been tested for DVB T the signal can be too weak or flawed for the unit to work properly It is therefor
9. T 17 TV RADIO Used to switch between TV channels and Radio stations 18 TEXT Used to open teletext OSD display ifteletext 21 available in the broadcasted stream 22 19 EXIT RECALL 23 1 return to upper menu 2 programs replaying under mode of full screen 20 VOL Used to move around the menu screens or changing the volume in non menu state 24 21 MUTE Used to turn the sound on or off 25 22 CH Used to move around the menu screens or selecting the channels in non menu state 26 23 INFO 1 Display the detailed information of programs 2 Show help information of the keys in current menu 24 Button without function 25 STOP Stop playing USB Media 26 REV amp FWD 1 image zoom in out 2 speed up down while USB Media playing Note SUBTITLE TEXT AUDIO may not be available for all Channels 5 Connections Connecting to TV and VCR Antenna TV KIT 6 First Time Installation After all the connections have been made properly switch on your TV Make sure the receiver is connected to the mains and press STANDBY to switch the receiver on If you are using the receiver for the first time a First Time Installation menu will be displayed to guide you through the initial setup Use the remote controller to finish the setup 1 Atthe First time installation menu Enter you
10. allation Refer to Auto Search on page 17 for details 7T Basic Operations Once program search is completed you can start to watch digital terrestrial TV channels and radio broadcasts Some typical operations are given in this chapter Switching On and Off Whenever you are not using the receiver press the STANDBY key on remote control to put itinto standby mode Changing Channels To switch between different channels you can e Press OK to switch the speediness program list press LEFT RIGHT to select different program class press UP DOWN to select program Figure 7 1 e Press the CH CH key to go to the previous next channel e Use the numeric keys to select a channel number e Use the EXIT RECALL key to return to the previous viewed channel Watching Favorite List You can press FAVORITE to watch your preset favorite channels To create your favorite list Refer to Channel Organizer on page 11 for detailed information Choosing Subtitle You can press the SUB T key to select or close subtitles on the screen The available subtitles depend on the broadcaster Freezing When watching a channel you can freeze the current screen by pressing the PAUSE key Pressing it again disables the freeze Function Displaying Text Press the TEXT key to open a teletext page if teletext is transmitted Press TEXT key again to close it Sound Mode Selection Certain channels or programmes
11. ating the directive 89 336EEC This logo set on the product means that the recycling of this apparatus comes within the framework of the directive 2002 96 EC of January 27 2003 concerning the waste on electrical and electronic equipment WEEE The presence of dangerous substances in the electrical and electronic equipments can have potential consequences on the environment and human health in the cycle of reprocessing this product Therefore at the end of its lifetime this product shall not be disposed with other non recycled waste As the end user your role is of prime importance in the cycles of re using recycling and lother forms of valorization of this electrical and electronic equipment Local authorities land resellers have set special procedures for the purpose of collecting and recycling this product r You have the obligation to use the selective waste collection systems put in place by youn local authorities Table of Contents 1 Introduction e Inn 1 2 Front and Rear Panel e III 2 3 Quick Installation Guide for First Use e teers 3 4 4 Remote Controller e n KK 5 5 Connections HH n hn 6 6 First Time Installation e e K K III 7 8 7 Basic Operations Seded heir nr qe e adt 9 10 8 Using the On Screen Setup Menu cece ttt nn nennen nn 11 25 9 Troubleshooting Sis Tua 26 27 10 Specifications suma NM A walk
12. d go to the Move column 2 Press YELLOW and a symbol will be displayed 3 Use the UP DOWN key to move the channel to a desired position 4 Press OK to proceed Figure 8 3 3 Lock Channel Select the channel you wantto lock and then press BLUE A padlock symbol will be displayed To remove the lock press BLUE again To set or cancel Lock program the system will hint to input password default is 0000 Channel Organizer 0002 USA Video 0003 Kenya Video Figure 8 4 4 Deleting a Channel 1 Select the channel which you like to delete 2 Press Green and an symbol will be displayed Repeat this step in the channel to be cancel 3 Press EXIT RECALL and the marked channel will be deleted Channel Organizer S No Channel name 0003 Kenya Video Figure 8 5 5 Rename Channel To rename channel press UP DOWN key to choose the line where the channel to be renamed is press LEFT RIGHT key to enter the page to rename the channel 13 Figure 8 6 8 1 2 Channel Sorting The channels shall be listed according to certain sequence so that the user can easily find them 1 You can enter the page as shown in the figure below via MENU gt Digital TV gt Channel Manager gt Channel Sorting Figure 8 7 2 Before sorting the type of sorting shall be set including the following items 1 First Option choose the programs to be sorted via the sel
13. e highly recommended that you ask for a qualified technician to test the compliance of your home antenna This unit has been designed and is guaranteed to work with a signal of at least 60dB 27 10 Specifications Item Specification Tuner Frequency Range VHF 174MHz to 280MHz UHF 470MHz to 862MHz Input Impedance 75 Ohms unbalanced Signal Input Level 78 25 dbm Bandwidth 7 8 MHz Demodulation Demodulator COFDM OFDM Modulation 2K 8K FFT SFN and MFN Packet Carries 2K 8K Guard Interval 1 4 1 8 1 16 1 32 Connectors RF IN IEC 169 2 female connector RF LOOPTHOUGH IEC 165 2 male connector TV SCART Composite video CVBS RGB audio L R COAXIAL RCA for SPDIF digital audio output USB USB2 0 Power Input 230V 50Hz Consumption 5 max Display Decoder Module PAL NTSC Resolution 720x576 PAL 720x480 NTSC Aspect Ratio 4 3 Letterbox Pan amp Scan 16 9 Decoding Video MPEG2 Transport MP 9 ML Audio MPEG2 Audio Layer I amp II Other Compliance ETSI EN 300 744 DVB T Compliance Sound Mode Right Left Stereo 28 SAV ADMEA LOGISAV Zl du clos des charmes 26 rue du clos des charmes 77090 COLLEGIEN FRANCE Important remarks about reading MPEG 4 videos on this unit If you encounter any problems when playing MPEGA videos please check the below points 1 There is a wide variety of codecs and compression methods
14. ection area 2 Second Option FTA free of charge Scramble encrypted ALL Free and Encryted Channels 3 Third Option According to alphabetic order A Z or Z A 3 Press UP DOWN key choose Type Press LEFT RIGHT key to set Sorting Parameters 4 After sorting is set to realize channel sorting press OK key 14 8 1 3 Channel Grouping Group channels according to Movies Sport Music Kids Fashion etc 1 You can enter the page via MENU gt Digital TV gt Channel Manager gt Channel Grouping Figure 8 8 2 Press UP DOWN key to choose the line where the channel to be grouped is in then press the number keys 1 8 on the remote controller to set different channel grouping 3 After channel is edited when EXIT RECALL key is pressed to exit the menu if actual channel editing action exists the system will carry out channel grouping renewal with the hint of Successfully Update 8 1 4 Edit Channels Have such operations as Add Delete and Rename to channels 1 You can enter the page via MENU gt Digital TV gt Channel Manager gt Edit Channels Figure 8 9 2 Press the RED key of the remote controller to enter Add Channel menu Figure 8 10 Under Add Channel menu there are 6 parameters for adding one channel as follows Area Name Carrier Channel Name Audio PID Video PID PCR PID Press OK key to confirm the adding the system will hint with Successfully U
15. eries inside the remote control batteries not included Third step Select the language Turn on the unit by pressing the standby button located on the unit s front panel The default language is French If you need to change this language press the Menu key of the remote control Then select TV NUMERIQUE Then select CONFIGURATION Then select AFFICHAGE MENU Then select LANGUE DES MENUS and choose your language ESPAGNOL for Spanish PORTUGAI for Portuguese ANGLAIS for English and Pays Bas for Nederland language Step 4 Select the Channel Auto Search Press the Menu key from the remote control Select Digital TV Then select installation Then select Auto search in order to run the automatic channels search Channels scanning may take a few minutes to complete The programs will be then automatically scanned and parametered onto your DVB T Also consult the rest of this instruction manual for more information Important Remarks 1 Analog Reception and DVB T Reception When you wish to watch TV using your TV tuner analog tuner and that your DVB T unit has been turned off or unplugged the image quality can be deteriorated according to the TV you are using This is normal your DVB T unit must be set in standby mode to allow a good quality signal 2 Problems receiving DVB T channels First check that you have well connected your home antenna with the DVB T uni
16. h the product for example CDs or magazines Proper ventilation Place the product in a sufficiently aerated place to avoid overheating Allow at least 10cm spacing at the back and top of the product and 5cm spacing on both sides to prevent overheating Do not place items such as newspapers tablecloth curtains in front or the ventilating openings Do not expose the product to high temperatures moisture water and dust The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus Donot place other items close to this product that may damage it for example an object containing water or lightened candles naked flame sources such as lighted candles should be placed on the apparatus Electric supply Please unplug the product in case of prolonged non use This product is intended to be used under temperate climate and should not be used under tropical climate Ifthe supply cable is damaged it must be replaced by the manufacturer or qualified after sales personnel to avoid any danger This product must be connected to an electrical supply 230V 50Hz The mains plug is used as the disconnect device so the disconnect device shall remain readily operable 73 23 EEC modified by the directive 93 68 EEC and 2004 108 EC This product is compliant with directives 2006 95 EC abrogating the directive Abrog
17. io a 4 3 LB Letterbox For conventional 4 3 TV The full width of a windscreen content is displayed on a normal TV with black bars above and below the picture a 4 3PS Pan amp Scan For conventional 4 3 TV It crops the left and right edges of a windscreen content to fit a normal TV a 16 9 If you are using a wide screen TV select this option Video Output Set the video mode as CVBS or RGB 8 3 3 System Setup System Setup menu can provide convenient system setup you can via menu MENU gt Digital TV gt Configuration gt System Setup enter System Setup menu 20 system Setup EQ Setup Jazz Standard Surround Classic JPEG Effect OFF Rock LCN ON Jazz Area France POP Auto Standby ON Figure 8 18 EQ Setup To set output sound effect Surround To set stage effect JPEG Effect To set picture effect LCN Logic Channel Number ON or OFF Area To set scanning area and choose choose area to download preset channel settings Auto Standby Automatic switch to standby mode after 3 hours of active mode without action from user 8 3 4 Time Setting Select an appropriate time zone to display the local time correctly you can via menu MENU 2 Digital TV Configuration Time enter Time setting menu Time Time Mode Manual Auto Date 01 01 2000 Manual Time 00 10 GMT Offset Auto Summer Time Figure 8 19 In Time menu there are two time modes one is Auto setting revise via set
18. l lock control NTSC PAL converting automatically and manually Multiple language OSD Supports multi subtitle Tuner RF in loop through Package Contents Before installation please check the items of the package The package should contain the following items DVB TTV Receiver x1 Remote Controller x1 User s Manual x1 2 Front Panel and Rear Panel Front Panel 6 7 8 1 CH 5 VOL 2 VOL 6 REMOTE CONTROLSENSOR 3 STANDBY SWITCH 7 STANDBY INDICATOR 4 CH 8 USB INPUT Rear panel WJ N x D O ooo 2E 110 5 1 RF LOOP THROUGH This socket will bypass the RF signal to either your TV or another video system 2 RF IN This socket connects to your external aerial 3 TV SCART This socket connects to your TV 4 COAXIAL This socket connects to a coaxial socket on your home theater 5 MAINS CABLE This is used to connectto your main power supply 3 Quick Installation Guide for First Use First step Connect the DVB T with your antenna and your TV Connect your home antenna directly with your DVBT then connect your TV with the DVBT with a SCART cable SCART and antenna cables not provided as explained further in the present instruction manual Second step Prepare the remote control Insert two AAA batt
19. m is detected and the scanning process is finished system will exit the scanning page and save the program at the same time return to the installation menu and to play them in vpp window automatically 8 2 2 Manual Search If any channel is missing after auto search or you want to add newly launched channels you can use Manual Search to scan the desired channels To manually search the target channel you must know its parameters e g the channel number After the channel is found itis appended to the current channel list 1 Enter the Manual Search menu via Main Menu 2 Digital TV Installation Manual Search 2 Specify the appropriate channel number in the Channel No field by pressing RIGHT LEFT or the numeric keys Upon your selection the frequency and bandwidth values are changed accordingly 3 Select OK to start manual search Figure 8 14 8 3 Configuration Configuration provides individualized system setup function you can configure the system according to your own hobby and demand You can enter Configuration menu via the menu MENU gt Digital TV gt Configuration 18 Digital TV Figure 8 15 8 3 1 OSD Via OSD option setup you can set the user interface display mode according to your own demand Via the menu MENU gt Digital TV gt Configuration 2 OSD you can enter OSD menu 1 OSD sets system menu mode 2 Time on OSD sets whether to display system time in full screen
20. nstallation screen appears asking if you would like to conduct an automatic scan search 23 USB Connecting a USB device 1 Power on the unit 2 Insert a USB key or a compatible memory card inside the connector 3 Press USB to enter the playing USB menu Database Empty Figure 8 24 Formats compatible with this unit are JPEG photos of up to 6MB standard definition MPEG 4 videos and MP3 audio files without copyright protection DRM Press UP DOWN key to select movie item to play movie files Press UP DOWN key to select music item to play music files Press UP DOWN key to select photo item to play photo files During USB device playback press EXIT key to back the selected TV program Remark Depending on the capacity of the device the reading can take more than 1 minute before launching the video The unit cannot read my USB device Once you have plugged your device to the unit you may need to switch on the USB device before it can operate This unit does not support a direct USB connection with a computer You need to use a USB device a MP3 player or a PMP Portable Multimedia Player with hard disk If you are using a USB external hard disk you need to connect your device simultaneously to an external power source and to the unit If you are using a self powered PMP make sure that the battery is sufficiently loaded Check that the files system of your USB device is f
21. nt panel Front panel obstructed Check for obstructions Remote control batteries are inserted incorrectly Check batteries direction Handset batteries exhausted Replace remote control batteries After moving the receiver to another room find can t receive the digital reception The aerial feed may come through a distribution system which may reduce the digital signal now received by the receiver Try a direct feed from the antenna The unit shuts down automatically If no operation is performed from the remote control for three hours the unit will automatically switch to standby mode to reduce power consumption Press the Standby button to putthe unit back into operation 26 Important Remarks 1 Analog Reception and DVB T Reception When you wish to watch TV using your TV tuner analog tuner and that your DVB T unit has been turned off or unplugged the image quality can be deteriorated according to the TV you are using This is normal your DVB T unit must be set in standby mode to allow a good quality signal 2 Problems receiving DVB T channels First check that you have well connected your home antenna with the DVB T unit Start a new automatic channel search as follows 1 Press the MENU key from the remote control 2 Select Digital TV 3 Then select installation 4 Then select Auto search in order to run the automatic channels search
22. ormatted into the FAT or FAT 32 format USB device formatted into NTFS are not compatible with this unit Caution if you attempt to modify your file system formatting your device will erase all data Please refer to your USB device s instruction manual first Warning Connect your USB device directly to the USB port of the device Using an extension cable is not recommended and may cause interference and failure of data transfer 25 9 Troubleshooting Troubleshooting If you experience problems with this receiver or its intallation in the first instance please read carefully the relevant sections of this User Manual and this Troubleshooting section Problem Possible cause What to do Standby light not lit Mains lead unplugged Check mains lead Mains fuse blown Check fuse No signal found Aerial is disconnected Check aerial lead Aerial is damaged misaligned Check aerial Out of digital signal area Check with dealer No picture or sound Tuned to digital teletext channel Retune to another channel Mosaic blocks in picture or picture freezes Aerial may not be compatible Check aerial Scrambled channel message Channel is scrambled Select an alternative channel Forgotten channel lock code Re install channels to cancle channel lock No response to remote control Receiver off Plug in and turn on receiver Handset not aimed correctly Aim handset at fro
23. pdate and return to Edit Channel menu Press EXIT RECALL key to return to Edit Channel page 3 Press the YELLOW key to enter Edit Channel menu as shown in Figure below Figure 8 11 The operation for this menu is as that of for Add Channel page 8 1 5 Delete AII If you do not like one or some channels you can delete it them in Channel Organizer menu but if you do not like all TV or Radio you can enter Delete All menu to choose to delete all TV RADIO 1 Under Channel Manager menu press UP DOWN key to choose Delete option press OK key again then the system will hint with the dialogue box of inputting password which is defaulted as 0000 input the proper password via the 0 9 number key then enter Delete All menu Channel Manager SCHA Enter password Figure 8 12 8 2 Installation 8 2 1 Auto Search Auto search is a kind of intelligent and convenient mode of programs searching which covers programs of all frenquent points of target countries or regions 1 Enter the Auto search menu via Main Menu gt Digital TV gt Installation gt Auto Search Press OK to start Auto Search Installation Figure 8 13 2 After entering into auto search page system will scan all programs one by one under frequency points of current countries or regions selected automatically 3 During scanning press EXIT RECALL key to stop and exit scanning 4 If any progra
24. t Start a new automatic channel search as follows 1 Press the MENU key from the remote control 2 Select Digital TV 3 Then select installation 4 Then select Auto search in order to run the automatic channels search 3 Different volume levels between channels in AC3 format and those in stereo format Certain DVB T programs may be broadcasted in AC3 format which provides a superior audio quality via the coaxial output from the receiver If you chose the AC3 format and Switch to a channel in stereo format afterwards the audio volume may increase depending on the DVB T program format and your home theatre equipment This is normal in this case consider reducing the volume prior to changing channels to avoid listening gene 4 Receiving CANAL PLUS With this unit you can receive CANAL PLUS when the content is unscrambled free of charge When you scan and launch the channel search during the first installation and that CANAL PLUS is scrambled at that time it is possible that the unit classifies this channel as a scrambled channel and therefore as an unavailable channel In order to resolve this problem launch a new channel search as described in the section above at a time when CANAL PLUS broadcast unscrambled programs CANAL PLUS will then be listed correctly as a viewable DVB T channel 5 If the reception problem still occurs Your unit has been tested for optimal performance over all the country In most cases
25. the DVB T reception problems are due to a weakness in your home s antenna installation If your installation is old or has never been tested for DVB T the signal can be too weak or flawed for the unit to work properly It is therefore highly recommended that you ask for a qualified technician to test the compliance of your home antenna This unit has been designed and is guaranteed to work with a signal of at least 60dB 4 Remote Controller STANDBY o ND AH CO 1 STANDBY Used to switch the set top box to on and off 2 NUMBER KEYS Used to select channel numbers or input numbers in menus 3 GAME Used to select 3 built in mini games Box Man Tetris Hit Rat 4 MENU Used to open the main menu window 5 CH Used to move around the menu screens or selecting the channels in non menu state 6 VOL Used to move around the menu screens or changing the volume in non menu state 7 0K Used to confirm a selection within a menu 14 8 ZOOM Enable disable zoom 9 FAVORITE Used to access your favorite channels 15 10 PLAY Play USB Media 11 PAUSE Used to pause or playback the program being 16 viewed 12 PREV NEXT play previous next USB Media 17 13 RED BLUE GREEN YELLOW BUTTONS These 18 buttons are used to navigate teletext pages 14 USB Play USB media 19 15 SUB T Used to switch between different subtitles that are broadcasted 16 AUDIO Used to set the sound output the available 20 settings are STEREO LEFT RIGH
26. ting GMT Greenwich Mean Time Offset Summer Time options the other is Manual setting revise via setting Date Time options When the setting is Manual press UP DOWN key to move upward and downward the cursor to move only between Timer Mode Date and Time 1 Set Date option move the cursor upward and downward onto Date option press LEFT RIGHT key to enter date setting menu Figure 8 20 In Date setting menu Press INFO key to eject help information Figure 8 21 2 Set Time option move the cursor upward and downward to Time option press 0 9 number key to revise values After time is set Press OK key to save the setting the system will hint with Successfully Update 8 3 5 Parental Lock Change PIN Allows you to change the PIN APIN can be composed of 1 to 4 digitals To change the PIN enter the old new PIN in the provided fields The default PIN is 0000 Watching Locked Channels Figure 8 22 Once a channel is locked whenever on one want to watch the locked channel correct PIN must be entered Figure 8 23 8 4 Factory Default This option allows you to resume factory defaults 1 Select OK to reset defaults 2 All Programs you have searched will be erased and all parameters e g the regional settings languages and favorite lists will return to the factory default 3 After restoring defaults turn off the unit and switch on it again a First Time I
Download Pdf Manuals
Related Search